Community discussions

Search found 28 matches

by RB951G2HnD
Sat Feb 11, 2017 5:10 pm
Forum: Scripting
Topic: Traffic counter script with an output to the TXT file on internal flash
Replies: 0
Views: 424

Traffic counter script with an output to the TXT file on internal flash

I would like to to collect an output of the following commands and put it one file (like Traffic.txt) in a suitable format. An appropriate script is required that will be running on a schedule once a day. [admin@MikroTik] > :put [/interface get [find name=ether1] rx-byte ]] 6711150062 [admin@MikroTi...
by RB951G2HnD
Tue Dec 01, 2015 8:20 am
Forum: Wireless Networking
Topic: Wifi keeps mobile device awake? [keepalive packets]
Replies: 81
Views: 28151

Re: Wifi keeps mobile device awake? [keepalive packets]

The problem here because of the 'group-key-update' value - this interval is too short. 1 day will be better to have than 1 hour as it is now. It seems that MikroTik Team didn't pay attention to my previous post. In general WMM is working fine as expected.
by RB951G2HnD
Wed Jul 15, 2015 8:10 pm
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 58427

Re: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)

josu see all my posts above. As I had wrote there is no way to configure interfaces bandwidth collecting via SNMP on MikroTik RB951 at least. If you will find the way you will be a pioneer (let me know how).
by RB951G2HnD
Tue Jul 14, 2015 3:25 pm
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 58427

Re: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)

I had removed Cacti from the server because my Mikrotik device doesn't support SNMP polling for the desired goal. I surfed the www and didn't find the same what I need.
by RB951G2HnD
Thu Jun 11, 2015 7:16 am
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 58427

Re: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)

Hello,

Could you please help me to configure Cacti to get data via SNMP from the router - I need to see the WAN bandwidth utilization? Now I can see the CPU load only and can't create a new graph for traffic.
by RB951G2HnD
Tue Apr 07, 2015 10:12 am
Forum: Wireless Networking
Topic: Wifi keeps mobile device awake? [keepalive packets]
Replies: 81
Views: 28151

Re: Wifi keeps mobile device awake? [keepalive packets]

I believe that if Mikrotik will implement WMM power saving in the future versions of code it will not affect your battery power drain because anyway your mobile devises are goin into power save mode automatically when the screen is switched off. The problem here is that all traffic between the mobil...
by RB951G2HnD
Mon Apr 06, 2015 10:51 am
Forum: Wireless Networking
Topic: Wifi keeps mobile device awake? [keepalive packets]
Replies: 81
Views: 28151

Re: Wifi keeps mobile device awake? [keepalive packets]

I think that due to Mikrotik supports only legacy power-saving and WMM power saving is not yet supported is the reason why too much new mobiles devices based on Android or iOS operating systems are losing WiFi connection. I made a following test with the mobile phone based on Android OS. Start ping ...
by RB951G2HnD
Wed Apr 02, 2014 11:30 am
Forum: Beginner Basics
Topic: QoS on a Mikrotik RouterBOARD with ROS v6?
Replies: 2
Views: 1605

Re: Packetshaper and QoS on a Mikrotik RouterBOARD with SW v

Let's simplify my requirements. At this moment I would like just to decrease traffic usage by torrent client when users are using Internet. According to the config bellow I can mark torrent's packets in the Mangle rules correctly (see screenshot below). But when the torrent client is active there is...
by RB951G2HnD
Fri Mar 28, 2014 5:36 am
Forum: Beginner Basics
Topic: Using RouterOS to prioritize (Qos) traffic for a Class C net
Replies: 111
Views: 187529

Re: Using RouterOS to prioritize (Qos) traffic for a Class C

Yesterday I was able to slightly adjust QoS priorities. But somehow torrent traffic clogs channel so that for example in parallel to watch youtube is not possible. Torrent traffic is marked in the Mangle rules correctly. Please prompt me where to look and what needs to be corrected into config? /que...
by RB951G2HnD
Wed Mar 26, 2014 10:36 am
Forum: Beginner Basics
Topic: Using RouterOS to prioritize (Qos) traffic for a Class C net
Replies: 111
Views: 187529

Re: Using RouterOS to prioritize (Qos) traffic for a Class C

No QoS config provided by TecnoNet is not working because all traffic marked as 'other' including http and etc. So the attached config file is wrong.
by RB951G2HnD
Mon Mar 24, 2014 8:11 pm
Forum: Beginner Basics
Topic: Using RouterOS to prioritize (Qos) traffic for a Class C net
Replies: 111
Views: 187529

Re: Using RouterOS to prioritize (Qos) traffic for a Class C

TecnoNet, Thank you for a good QoS config script. It seems that it's working fine except P2P. In our days the most of P2P clients are using encryption and that is the reason why a simple indicated P2P option is not working in a Mikrotik ROS. I think that to make this QoS config script working with t...
by RB951G2HnD
Mon Dec 30, 2013 4:04 pm
Forum: Beginner Basics
Topic: How to configure WiFi on a RB951G-2HnD with SW v6.5?
Replies: 3
Views: 1816

Re: How to configure WiFi on a RB951G-2HnD with SW v6.5?

Yes I thought so and it is true. Now it works fine. Thanks!
by RB951G2HnD
Thu Dec 26, 2013 9:36 am
Forum: Beginner Basics
Topic: How to configure WiFi on a RB951G-2HnD with SW v6.5?
Replies: 3
Views: 1816

How to configure WiFi on a RB951G-2HnD with SW v6.5?

I have a configured and working fine router RB951G-2HnD with the additional access point (AP) connected. Now I need to configure internal AP in router with different SSID. So I need to have a second standalone AP. I had successfully configured wlan1 interface. I can see the authenticated clients but...
by RB951G2HnD
Mon Nov 18, 2013 1:49 pm
Forum: Beginner Basics
Topic: PPPoE connection dropping
Replies: 1
Views: 791

Re: PPPoE connection dropping

Now I'm sure on 99% that connection is dropping on the ISP side. Because radius_default_session_timeout by default is 86400 seconds. I believe that it wouldn't be changed because of if the billing period is over then the session will not be interrupted. And I will be able to use Internet with the $0...
by RB951G2HnD
Fri Nov 15, 2013 3:08 pm
Forum: Beginner Basics
Topic: PPPoE connection dropping
Replies: 1
Views: 791

PPPoE connection dropping

Hello, I had analyzed my log file and found that my PPPoE connection are dropping on a daily basis. My log file with the applied filter is below. ​ Nov 1 21:57:00 MikroTik info: pppoe-out: connected Nov 2 21:57:01 MikroTik info: pppoe-out: connected Nov 3 21:57:04 MikroTik info: pppoe-out: connected...
by RB951G2HnD
Tue Nov 05, 2013 3:07 pm
Forum: Beginner Basics
Topic: QoS on a Mikrotik RouterBOARD with ROS v6?
Replies: 2
Views: 1605

QoS on a Mikrotik RouterBOARD with ROS v6?

Good day, I had read a lot of documentation on the official website: http://wiki.mikrotik.com/wiki/Manual:TOC and spend a lot of time in my findings but I still haven't idea how to implement my idea in life. I have attached the Network diagram and QoS algorithm how I wish to configure my router. Cou...
by RB951G2HnD
Tue Nov 05, 2013 1:05 pm
Forum: Beginner Basics
Topic: PPTP Disconnects
Replies: 2
Views: 1778

Re: PPTP Disconnects

It is very interesting issue! Because I have exactly the same problem with often ISP disconnects on my side but using PPPoE.

Support Team could you advice how to make 'Always On' for the WAN link. At this moment it seems that it work like 'On Demand'.
by RB951G2HnD
Thu Oct 24, 2013 9:55 am
Forum: Beginner Basics
Topic: New RB951G-2HnD bricked? [Solved with Netinstall]
Replies: 28
Views: 47624

Re: New RB951G-2HnD bricked?

Another one point. I think that your bootloader may have the incorrect version for the installed firmware and needs to be upgraded also. More information: http://wiki.mikrotik.com/wiki/RouterBOA ... er_upgrade
by RB951G2HnD
Wed Oct 23, 2013 1:26 pm
Forum: Beginner Basics
Topic: PPPoE reconnect delay
Replies: 2
Views: 1613

Re: PPPoE reconnect delay

I think that keepalive-timeout (time; Default: "10") should care about this. But I'm not sure and asked a question. Description: Defines the time period (in seconds) after which the router is starting to send keepalive packets every second. If no traffic and no keepalive responses came for that peri...
by RB951G2HnD
Wed Oct 23, 2013 10:51 am
Forum: Beginner Basics
Topic: Setup pppoe client on Mikrotik
Replies: 12
Views: 26503

Re: Setup pppoe client on Mikrotik

What does keepalive-timeout (time; Default: "10") means? Description: Defines the time period (in seconds) after which the router is starting to send keepalive packets every second. If no traffic and no keepalive responses came for that period of time (i.e. 2 * keepalive-timeout), not responding cli...
by RB951G2HnD
Wed Oct 23, 2013 9:51 am
Forum: Beginner Basics
Topic: pppoe-client and nat rule problem
Replies: 2
Views: 3099

Re: pppoe-client and nat rule problem

Hi Suntan,

You need to change your NAT rule this way:
/ip firewall nat
remove 0
add action=masquerade chain=srcnat out-interface=pppoe-out1 src-address=192.168.0.0/27 to-addresses=0.0.0.0
But don't forget to modify your src-address value.

Andrew
by RB951G2HnD
Wed Oct 23, 2013 9:27 am
Forum: Beginner Basics
Topic: Firewall common configuration rules
Replies: 4
Views: 2753

Re: Firewall common configuration rules

Yesterday evening I had enough time for the troubleshooting. I found that my default route was also incorrect. So I changed the following strings into my configuration shown below. More over I kept both NAT rules. Because when PPPoE connection is not active my traffic flows thru the ether1 port. /in...
by RB951G2HnD
Tue Oct 22, 2013 7:28 am
Forum: Beginner Basics
Topic: New RB951G-2HnD bricked? [Solved with Netinstall]
Replies: 28
Views: 47624

Re: New RB951G-2HnD bricked?

You may try to use port 3. If it's will be the same then ask Mikrotik Support person if it's possible to recover somehow after the incorrect flashing during the upgrade. Probably you will be needed to send your box to they service center.
by RB951G2HnD
Mon Oct 21, 2013 2:05 pm
Forum: Beginner Basics
Topic: Firewall common configuration rules
Replies: 4
Views: 2753

Re: Firewall common configuration rules

Should I keep two strings or just one for PPPoE client? /ip firewall nat add action=masquerade chain=srcnat out-interface=ether1 src-address=1.10.10.0/27 add action=masquerade chain=srcnat out-interface=pppoe-out src-address=1.10.10.0/27 And the same what about a Firewall filter string? /ip firewall...
by RB951G2HnD
Mon Oct 21, 2013 1:15 pm
Forum: Beginner Basics
Topic: New RB951G-2HnD bricked? [Solved with Netinstall]
Replies: 28
Views: 47624

Re: New RB951G-2HnD bricked?

I believe that your router board is not dead after the upgrade. You may try to disable a firewall on your PC and try again to use a Winbox. If it does not help then you may try to restore a factory default settings. In that case you will be needed to insert a pin into the 'reset' hole then connect a...
by RB951G2HnD
Mon Oct 21, 2013 10:21 am
Forum: Beginner Basics
Topic: Firewall common configuration rules
Replies: 4
Views: 2753

Firewall common configuration rules

Greetings, I had purchased my first MikroTik Routerboard and made upgrade it to RouterOS v. 6.4. Yesterday I configured it first time. I can see that PPPoE connection is up but ping to any IP from the router is not possible neither from PCs in LAN. During the router configuration I used a manuals fr...