Community discussions

MikroTik App

Search found 43 matches

by exebug
Thu Jul 12, 2012 5:15 pm
Forum: RouterBOARD hardware
Topic: RB750 CPU Usage Problems
Replies: 25
Views: 12072

Re: RB750 CPU Usage Problems

Yes on 5.18

Mailed the supout.rif file
by exebug
Thu Jul 12, 2012 2:18 pm
Forum: RouterBOARD hardware
Topic: RB750 CPU Usage Problems
Replies: 25
Views: 12072

Re: RB750 CPU Usage Problems

No not running any web proxy , also switched off all local logging and not running user manager yet this still happens
by exebug
Wed Jul 11, 2012 10:28 am
Forum: RouterBOARD hardware
Topic: RB750 CPU Usage Problems
Replies: 25
Views: 12072

RB750 CPU Usage Problems

Hi

I have very high CPU usage on my RB750 which causes kernel failure reboots, tried various routerOS versions

If i do profile running i get the following
by exebug
Wed Apr 20, 2011 5:35 pm
Forum: General
Topic: v.5.1 release
Replies: 29
Views: 6902

Re: v.5.1 release

My RB450 runs 100% cpu all the time with 5.1
by exebug
Thu Dec 30, 2010 8:30 am
Forum: General
Topic: pppoe connection come and go
Replies: 0
Views: 376

pppoe connection come and go

Upgraded a RB600 to 4.16, and replaced an Alfa card with a r52hn with new pigtails all round, clients have good signal to the new card, but pppoe sessions don't seem complete or last long if they authenticate, completely reset the the card twice and re-setup from scratch, still same problem, Put bac...
by exebug
Mon Oct 18, 2010 7:50 am
Forum: General
Topic: RouterOS v5 RC1
Replies: 82
Views: 20524

Re: RouterOS v5 RC1

Memory leak on RB450 running sstp server, board runs for about a day and runs out of memory
by exebug
Sat Sep 04, 2010 11:36 am
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 229
Views: 142146

Re: Sample Installations - Sticky Please

Which one would you use ???
Image
by exebug
Fri Aug 27, 2010 1:28 pm
Forum: RouterBOARD hardware
Topic: Strange RB800 Problem
Replies: 2
Views: 737

Re: Strange RB800 Problem

Will load it tonight and see what happens, can't now, as that is a main backbone link and is quite busy at the moment
by exebug
Fri Aug 27, 2010 1:21 pm
Forum: General
Topic: VPN between 3 "offices" with multiple "dial in" connections
Replies: 11
Views: 2424

Re: VPN between 3 "offices" with multiple "dial in" connecti

I am currently using sstp on 5beta6 and everything runs smoothly, apart from the small memory leak, it works 150% better than my OVPN tunnels which i ran between my rb450's
by exebug
Fri Aug 27, 2010 1:13 pm
Forum: RouterBOARD hardware
Topic: Strange RB800 Problem
Replies: 2
Views: 737

Strange RB800 Problem

Hi I have a very strange problem on a RB800, traffic runs at 200Mbps+ over a ether interface when nothing is even connected to it :shock:

Image
by exebug
Mon Aug 23, 2010 1:04 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 24897

Re: RouterOS v5 beta 6

Also waiting ;)
by exebug
Tue Aug 17, 2010 1:28 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 439
Views: 320153

Re: Sample Hotspot Page - Sticky Please

One That i Am Busy With, Running a IAS Card system that uses a 16 digit code that you enter as username

Image
by exebug
Thu Jun 10, 2010 9:10 pm
Forum: RouterBOARD hardware
Topic: RB800 ether problem
Replies: 9
Views: 2314

Re: RB800 ether problem

Will give it a try end report back
by exebug
Mon Jun 07, 2010 9:52 am
Forum: RouterBOARD hardware
Topic: RB800 ether problem
Replies: 9
Views: 2314

Re: RB800 ether problem

doing what? where is the problem?
Receive traffic at a rate of 220 Mbps without reason.
Yep exactly whats happening, no cable connected to the ethernet port, yet there is traffic runinng for
no reason
by exebug
Wed Jun 02, 2010 9:51 am
Forum: RouterBOARD hardware
Topic: RB800 ether problem
Replies: 9
Views: 2314

RB800 ether problem

I have the following problem on a ether with no cable connected

Image

ROS version 4.8

If i dissable and enable the interface it begins doing it again after a few seconds.

Any Ideas as to what could be the problem ?
by exebug
Wed Mar 17, 2010 3:42 pm
Forum: General
Topic: RouterOS License and v4 questions
Replies: 116
Views: 50367

Re: RouterOS License and v4 questions

Got a RB600 that tels me ROUTER HAS NO SOFTWARE KEY ------------------------------------------------------------------- Your router does not have any valid key. Please, get valid key from www.mikrotik.com and enter it at "System | License". If you already have paid for this license, please, press "U...
by exebug
Thu Jan 14, 2010 7:29 am
Forum: The Dude
Topic: Images on the dude on runnning on RB600
Replies: 2
Views: 1085

Re: Images on the dude on runnning on RB600

Okay thanks will check that, There is no images folder, I will create one and upload the images to the folder and see if it works
by exebug
Wed Jan 13, 2010 4:00 pm
Forum: The Dude
Topic: Images on the dude on runnning on RB600
Replies: 2
Views: 1085

Images on the dude on runnning on RB600

I am running The Dude on a RB600, but there are no images to select

Any idea as to why
by exebug
Fri Aug 22, 2008 2:12 pm
Forum: General
Topic: hotspot eoip bridging problem
Replies: 3
Views: 2884

Re: hotspot eoip bridging problem

Okay, just to make it a bit more interesting, i am not making use of eoip tunnels, i have a lan connection between 2 routers. MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM II...
by exebug
Thu Aug 21, 2008 12:44 pm
Forum: General
Topic: hotspot eoip bridging problem
Replies: 3
Views: 2884

Re: hotspot eoip bridging problem

any ideas yet as to why it gives that strange ping reply ??

I found the same problem on one of my hotspot networks
by exebug
Thu May 03, 2007 11:05 pm
Forum: Wireless Networking
Topic: Multiple problems with "deauth" spam/DOS
Replies: 11
Views: 2919

strnge deauths

i also have the same symptoms, also replaced everyting and the SR2 card twice, then replaced it with 8602 card, The 8602 card gives high ping times to clients, so i think the solution is to add a second AP on the board and split up the clients, because im running 60+ clients on one ap. I reckon this...
by exebug
Thu May 03, 2007 11:39 am
Forum: Wireless Networking
Topic: Ubiquiti Networks stability issue timeout
Replies: 36
Views: 5173

SR 2 Problems

I had the same problem with 2 differnet sr 2 cards, clients came back up for about a day then disconnect, I then have to disable and enable the card about 50 times then the clients started coming back, I even replaced the card with new one and same problem, then earthed the card to the tower, though...
by exebug
Wed Mar 14, 2007 11:22 pm
Forum: General
Topic: Traffic routing
Replies: 1
Views: 906

Traffic routing

I have this problem, i have a remote mikrotik connected to ISP with static ip's, the ISP does not allow smtp relaying over the connection, so created a l2tp vpn to my server just for mail, i need to switch of natting, but as soon as i switch of natting (masq) email works and no http, if i switch nat...
by exebug
Mon Mar 12, 2007 6:45 am
Forum: General
Topic: Weird l2tp Problem
Replies: 1
Views: 736

Weird l2tp Problem

I have a l2tp connection to a remote site, after it connects it stays up for about 30 min then it disconnects with

<l2tp-xxxx>:terminating..... -administrator request
<l2tp-xxxx>:disconnected
by exebug
Sat Mar 10, 2007 5:36 pm
Forum: General
Topic: SMTP over l2tp
Replies: 2
Views: 932

I got it working thnx 8)
by exebug
Sat Mar 10, 2007 4:55 pm
Forum: General
Topic: SMTP over l2tp
Replies: 2
Views: 932

SMTP over l2tp

Hi I have a l2tp connection to one of my remote mikrotiks i need to relay smtp traffic through the l2tp connection so i made a dst-nat rule to my smtp server All static routes are loaded, as soon as I dissable the masquerading on the remote mikrotik the mail works but no internet, and a soon as I en...
by exebug
Tue Mar 06, 2007 8:00 am
Forum: Wireless Networking
Topic: wisp configuration
Replies: 1
Views: 992

I have a similar setup that is working 100%.

If you need any help pm or mail me at riaan@frognet.co.za

I would be glad to help

eXeBuG 8)
by exebug
Tue Mar 06, 2007 7:48 am
Forum: Wireless Networking
Topic: pings become high too much
Replies: 6
Views: 1774

This might help

Do a frequency usage scan on the AP interface, then select a frequency that is less used.

I had a similar problem and this sorted the problem 8)
by exebug
Tue Mar 06, 2007 7:10 am
Forum: General
Topic: download quota !!!!
Replies: 1
Views: 929

http://wiki.mikrotik.com/wiki/Limiting_ ... traffic_II

This might be what u are looking for 8)
by exebug
Tue Mar 06, 2007 7:07 am
Forum: General
Topic: Transperent Proxy
Replies: 7
Views: 1760

by exebug
Sat Mar 03, 2007 8:39 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

Okay

Changed to RB502 and router has been up for 11 hours 8)

Added 1 new highsite and adding another tommorow
by exebug
Fri Mar 02, 2007 8:50 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

I flew 1400km on short notice to come and sort out the problem

I'm going to change the daughterboard with a 502 and if problem still persists
going to change R52 cards with Compex Cards

Will let u know what the results are
by exebug
Fri Mar 02, 2007 12:17 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

Changed power to 48volt, router ran for an 1 hour, then rebooted, now it keeps rebooting every 2 minutes with no error in the log when it comes back up :?: any ideas. :?: Config : Routerboard 532 (Replaced Yesterday) Daughterboard 564 2 x Sr2 Cards 2 x R52 Cards 48 volt psu unit 2 x 27dbi 5.8 grids ...
by exebug
Fri Mar 02, 2007 8:39 am
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

This seems to be a power issue, the reason for this is if I disable the the 2 sr cards and the other r52 card the router runs fine,so im gonna take out the poe and give it straight power and see what happens
by exebug
Thu Mar 01, 2007 2:21 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

:shock: now i get system rebooted because of kernel failure :shock:
by exebug
Thu Mar 01, 2007 12:40 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

I have changed the routerboard on that specific site, was running fine for about 45 minutes then same error again, updated to latest routerOS and same problem, haven't updated firmware as yet. :x

OK upgraded firmware to 2.6 on routerboard and still same problem

Any suggestions anyone??? :idea:
by exebug
Sat Feb 17, 2007 3:42 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

The problem seems to be the R52 cards on the backbone links, as soon as there flows data n get ping time outs from the interfaces, and after a few minutes it comes back. :shock:
by exebug
Sat Feb 17, 2007 2:43 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

Latest RouterOs loaded 2.9.40, after reboot no wireless devices found, so rebooted again with antennas disconnected and wireless devices were there, so i connected the antennas up one by one and still running, too scared to reboot. Config Routerboard 532 Daugtherboard 564 2 x R52 Cards Running 5 ghz...
by exebug
Fri Feb 16, 2007 12:57 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

After hard reboot everything seems fine.

I will install latest RouterOS a bit later on.

Thanx normis :)

I spoke too soon, problem is back :?
by exebug
Fri Feb 16, 2007 12:28 pm
Forum: General
Topic: Router Reboots
Replies: 14
Views: 2786

Router Reboots

Hi

I get the following error on one of my routers

system,error,critical router was rebooted without proper shutdown by watchdog timer

It keeps on rebooting the whole time.

Anyone know how to fix, I already treid switching of watchdog timer, then router does not come back.
by exebug
Sun Oct 22, 2006 8:45 am
Forum: General
Topic: routing without NAT
Replies: 3
Views: 7166

Static Routing

You need to add static routes of all the different subnets after the mikrotik to tell it where to go, aswell there needs to be static routes of all the subnets on your linux box if you want internet accros those subnets Here is an example of my mikrotik [admin@HQ] ip route> print Flags: X - disabled...
by exebug
Sun Oct 08, 2006 5:11 pm
Forum: General
Topic: Freeradius 1.1.0 + Mikrotik v2.9.7
Replies: 6
Views: 4348

This might help : On the pppoe server interface you should take out mshap1 and mschap2

eXeBuG
by exebug
Sun Oct 08, 2006 2:46 pm
Forum: General
Topic: freeradius mikrotik
Replies: 1
Views: 2951

You need to set the different IP Pools on the mikrotik, then just specify the pools in freeradius.