MikroTik

usx

No immediate problems noticed after upgrading the following from 7.13 (no patch version upgrades applied):

- RBmAP2n ("mAP 2n") x2
- RBD25G-5HPacQD2HPnD ("Audience")
- 2011UiAS-2HnD
- hAP RB951Ui-2nD ("hAP")
- RB4011iGS
- hEX 750G r3 ("hEX")

usx

Upgraded without problems:

- RBmAP2n ("mAP 2n") x2
- RBD25G-5HPacQD2HPnD ("Audience")
- 2011UiAS-2HnD
- hAP RB951Ui-2nD ("hAP")
- RB4011iGS
- hEX 750G r3 ("hEX")

usx

Do I understand it correctly that the WiFi menu/integration is optional? To go into extremes, I have an Audience and a mAP 2n in my network. I configure the access lists via a Python script which connects via SSH and issues all the commands. Currently all devices are therefore configured via `/inter...

usx

What does "defconf - fixed bogus wifi password on certain Audience devices;" mean?

I have an Audience device so I'm not sure if I should worry, because other than that there's nothing which would affect me, so I would skip this release.

usx

Could you please fix the issue with rows in Webfig tables not getting visually synchronized with the enable toggle action? For example, if I disable a Firewall rule (click D) and then enable it again (click E), this action of enabling won't give it back the black color, it still looks greyed out as ...

usx

. The following Bug which was introduced in 7.9 still exists: Re: v7.9 [stable] is released! -- Post by usx » Mon May 08, 2023 9:12 pm There is a new bug in WebFig. When toggling the enabled/disabled state from disabled to enabled, the entire row stays grey as if it were disabled. For example in WiF...

usx

Bug in webfig still persists: Toggle WiFi Interface off, then on. It stays greyed out even if it got enabled. This applies to all toggable rows in any config area.

usx

There is a new bug in WebFig. When toggling the enabled/disabled state from disabled to enabled, the entire row stays grey as if it were disabled.

For example in WiFi Interfaces or Firewall rules, I think it applies all the tables with rows which can be toggled.

usx

Following works ok:

RBmAP2n ("mAP 2n")
RBD25G-5HPacQD2HPnD ("Audience")
2011UiAS-2HnD
hAP RB951Ui-2nD ("hAP")
RB4011iGS
hEX 750G r3 ("hEX")

usx

Following works ok: RBmAP2n ("mAP 2n") -- FLASH storage RBD25G-5HPacQD2HPnD ("Audience") -- NAND storage: has Sector Writes statistics 2011UiAS-2HnD -- NAND storage: has Sector Writes statistics hAP RB951Ui-2nD ("hAP") -- FLASH storage RB4011iGS -- NAND storage: has Sec...

usx

Why is 7.1 posted under stable release tree? https://mikrotik.com/download/changelog ... lease-tree

usx

There is a bug in webif which has been bothering me now for several years: Sometimes, when I click on an item in a list, for example a firewall rule or a queue item, the item won't open, but the cursor directly turns into a move action. When I then move the mouse while the button is depressed, it mo...

usx

Did you get this to work? I am in the exact same situation. Speedport -> Routerboard -> Netgear GS108E-100PES -> Receiver.

Telekom did send a new Receiver because they are changing their Infra (used to be a MR303 which is now unusable). This did work very for 4 years.

usx

Fri Sep 14, 2018 9:45 am Email list Now we're talking. I was subscribed to it until it stopped sending me emails, without me unsubscribing. Where can I find that list? That solves the complete issue. I just thought they've dropped the list. Is it this one? https://mikrotik.com/client/ecom_notify.ph...

usx

Email list Now we're talking. I was subscribed to it until it stopped sending me emails, without me unsubscribing. Where can I find that list? That solves the complete issue. I just thought they've dropped the list. Is it this one? https://mikrotik.com/client/ecom_notify.php I got that link from my...

usx

What other releases did you expect? There have been no other releases! 6.43 for Stable and 6.44beta6 for Testing. I'm on the stable channel because I got automatically inserted into it. Don't you see the flaw? Aren't those releases as well? Or are we Stable and Testing users not special enough, lik...

usx

Had no issues when upgrading the following devices

1- RB450G
2- hEX 750 r3
3- hAP
4- RB951Ui-2nD
5- 2011UiAS-2HnD
6- mAP 2n
7- RB450G

usx

That blog is so freaking awesome! BUGFIX UPDATE 6.40.9 RELEASED -- https://blog.mikrotik.com/software/bugfix-update-6-40-9-released.html Well, that was the first and last blog entry about a release... We really need an email subscription list for all new releases/bugfixes/secvulns. Is that really so...

usx

In hindsight this makes sense, because if the parent queue had a real queue, then it would add it's latency to the child queues, with no real benefit at all, as a "catchall" sibling queue would have the same queuing effect, without the latency (and cpu-processing) getting added. On the ot...

usx

Thanks ZeroByte for your help, you brought me on to the right track. When you set the parent/child relationship, all traffic must first flow through the parent queue before reaching the streaming queue, which is why the parent queue shows all traffic. This is exactly what doesn't seem to be true. As...

usx

I'n not sure if I've hit a bug here, or if I'm missing something. I have one device with an address <IP>. ~~~~~ Mangling ~~~~~ In the postrouting chain of the mangler I have connection marker which checks if that IP matches a Layer7 protocol regex of ".googlevideo.com". If this rule matche...

usx

Hi, I've got the following setup: routing.png So I've got these two networks, which are connected via the orange link, which is an OpenVPN connection across the internet. The orange boxes are the tun0's on the OpenVPN boxes, left is server, right is client connected to server. The lower 192.168.40.0...

usx

Hi,

I just wanted to know the following:

If I have eth1 and wlan1 assigned to bridge1, what difference does it make if I assign an IP to eth1 instead of bridge1 or viceversa? I seems to work both ways.

usx

+1
was about to buy a CRS125-24G-1S-IN, but the lack of IGMP snooping told me not to.

usx

I have the same problem, but in addition I can't add the gateway and NTP server.

This is with Firefox.

Winbox can add all the values.

usx

Just tried installing racoon on the VPS for IPsec connectivity, but it turns out that the kernel doesn't have the necessary modules. Why on earth wouldn't you go that extra step to offer OpenVPN over UDP?

usx

Hi, thanks for your response. I had used the search, but since all the posts where pretty old, I thought there would be any news on it. So, which is the preferred way to go? I'm running a Debian based VPS in the cloud, and want a secure (and reasonably fast) connection with my LAN. OpenVPN is workin...

usx

Hi,

I managed to set up my RouterOS to connect to an OpenVPN server, but i've got a performance issue due to the lack of UDP support by RouterOS.

Is there any information avaliable as to when RouterOS will support UDP?

Thanks, kind regards,
Daniel

usx

Had no issues with the upgrade on a 2011UiAS-2HnD. But on a RB450G all but one of the Queue Graphs lost their data (the graph curve started as if it just got set up). The one which didn't lose the data is now showing an erroneous date (Nov/08/2150). The 2011UiAS-2HnD had no Queue Graphs, so I can't ...

usx

RB450G and 2011UiAS-2HnD upgraded without any problems.

RB450 had to be rebooted again a couple of minutes later, since the cpu was averaging at about 45%, but after the reboot it went down to the usual <7% average.

usx

Upgraded a RB2011UiAS-2HnD without any problems from 6.9 to 6.10. Upgraded a RB450G with the following problem: upon reboot I had no internet access, I waited for about 2 minutes, tried to log in via web interface, which would not respond, so I rebooted again via serial console. After about a minute...

usx

Hi, did you manage to get this working? Could you post a tutorial if you did? I also want to use IPsec X-Auth PSK with my Android device. I used to use a Fritz!Box for this, which worked OK. I'm puzzled about what I need to set up. A Peer? A User? A Policy? A Proposal? What's the difference between ...

usx

After noticing a very sluggish performance of the web interface I checked the resources, and cpu was constantly at 100. I then went again to the Routerboard tab, pressed "Upgrade" again (from 3.10 to 3.10) and forgot about it. Later on (maybe a minute later) in a terminal session I was hav...

usx

TL'DR: Firmare 3.10 reversed the functionality of the reset button. Hi, today I wanted to upgrade my RB450G to v6. It was runing v5.26 with firmware 3.8. I uploaded the file routeros-mipsbe-6.9.npk via the webinterface and rebooted. Firefox wouldn't then get past the "Loading..." page, but...

usx

Thanks for the reply. I was checking the RB450G Switch Chip features, where there is an indication that the Atheros8316 used in that board has a "Rule Table" which "is very powerful tool allowing wire speed packet filtering, forwarding and vlan tagging based on L2,L3,L4 protocol heade...

usx

Hi, I recently bought a RB450G and am very pleased with it. Initially I was looking for a CISCO Small Business SRW2024-K9-EU - SG 300-28 - 28-port Gigabit Managed Switch as a center piece for the network, being interested in the L3 routing capability for doing Inter-VLAN routing at wirespeed. But af...

usx

Hello, I'm new here, so first and foremost my greetings to you. I just got a RouterBoard 450G, and I'm hoping to solve an issue I'm having. I've been spending a week now on trying to find a solution, but I'm out of luck. What I want to archieve is the following (image below): On port 4 I have all my...

Search found 37 matches

Re: v7.14 [stable] is released!

Re: v7.13 [stable] is released!

Re: v7.13 [stable] is released!

Re: v7.12.1 [stable] is released!

Re: v7.11beta [testing] is released!

Re: v7.10 [stable] is released!

Re: v7.9.1 [stable] is released!

Re: v7.9 [stable] is released!

Re: v7.9 [stable] is released!

Re: v7.8 [stable] is released!

Re: v7.1 is released!

Bug in Web Interface: Chrome click on list item does not open item, but show move icon.

Re: Dt. Telekom VDSL BNG & IPTV (igmp v3)

Re: Security announcement blog

Re: Security announcement blog

Re: Security announcement blog

Re: v6.43 [current] is released!

Re: Security announcement blog

Re: SNMP bandwidth logging problem with Queue and Child Queue

Re: SNMP bandwidth logging problem with Queue and Child Queue

SNMP bandwidth logging problem with Queue and Child Queue

Routing through a gateway which is not directly connected to the router.

Assign IP to specific interface in a bridge vs to the bridge itself.

Re: IGMP Snooping

Re: Cant Add DNS servers (in DHCP) via webfig

Re: RouterOS as an OpenVPN client

Re: RouterOS as an OpenVPN client

RouterOS as an OpenVPN client

Re: v6.20 released!

Re: v6.11 released

Re: v6.10 released

Re: IPSEC pre-shared-key-xauth

Re: Serious Upgrade Issue RB450G | OS 5.26 -> 6.9 | FW 3.8->

Serious Upgrade Issue RB450G | OS 5.26 -> 6.9 | FW 3.8->3.10

Re: Inter-VLAN routing speed CRS125-24G-1S-IN

Inter-VLAN routing speed CRS125-24G-1S-IN

Problem: splitting selected traffic for filtering