MikroTik

paulsa

+1 in need of a 24 port SFP switch with at least 2 x SFP+. Preferably with e.g a dual core processor.

paulsa

The CRS226 is exactly what you're describing...24x 1 Gbps ports with 2x SFP+ 10 Gbps ports. What we really need is something with 12x or more SFP+ 10 Gbps ports, a switch with 48x 1 Gbps ports, or even 24x 1 Gbps with 4x 10 Gbps ports. Of course, with any of these, we'd also like simple features fo...

paulsa

Hi

Anyone know if Mikrotik is working on some fibre aggregation Layer 2 and 3 switches ?

e.g 24 port 1gbps SFP + at least 2 x 10Gbps SFP uplinks?

e.g to compete with Extreme Networks, Edgecore etc.

paulsa

I would love to see a crs fibre only swich, 24 1gbs SFP and 2 x 10Gbs SFP+.

paulsa

Normis - Is trafficflow fixed? We are implementing a CCR1072 at our core, and want to run the latest ROS - however we are still using 6.27 on our CCR1036 due to the trafficflow egress ingress issue in the later versions. Can you confirm this has been 100% fixed, I know it's listed in the changelogs ...

paulsa

I see in the change logs this has been "solved". Can anyone confirm in the latest ROS the ingress and egress is working correctly for trafficflow?

paulsa

Best tip would be to avoid using NAT.

paulsa

Ordered mine this week

Replacing our CCR1036 with it, will run 4 bgp feeds and multiple 10gbps interfaces.

paulsa

*) traffic flow - fixed dynamic input/output interface reporting

What does this fix compared to the traffic flow fix in 6.30.1?

paulsa

your point are rigth, for example if you dont need the 10 gig just plug a switch with one 10g port and the 1g port count of your need

Yup that is always an option, but I was more thinking of e.g connecting our existing CCR1036's to the 1072, which we can now do.

paulsa

Can anyone confirm that the 10Gbps interfaces can run the 1Gbps fibre modules? i think its better to use only 10g modules All very well, but not all our devices are 10gbps capable. If we could only use 10gbps modules then we would only currently be able to use 2-3 of the ports (i.e not financially ...

paulsa

Can anyone confirm that the 10Gbps interfaces can run the 1Gbps fibre modules?

paulsa

Trafficflow fix? 6.29 broke it, no egress + ingress netflows.
+

Any news? Anyone experiencing the issues that were in 6.29 and 6.29.1?

paulsa

Trafficflow fix? 6.29 broke it, no egress + ingress netflows.

paulsa

this update appears to have broken NetFlow it is no longer sending ingress and egress flow data for the same interface. only appears to be exporting Egress flows. per interface. +1 also experiencing this on our ccr1036. Upgraded from 6.22 to 6.29, only tx bandwidth flow being sent from an interface...

paulsa

Yup still waiting, in need of a router with at least 4 x SFP+ ports.

paulsa

We use unbound with anycast and bgp

paulsa

There is a gap in the Mikrotik equipment for a cost comparative product. There is the QRT5, but around 80% more expensive than a powerbeam/nanobridge, it is also a panel antenna. My recommendation would be a basebox5 + Antenna. Still more expensive than a powerbeam/nanobridge, but depending on the a...

paulsa

Since we split our routing, i.e ospf/firewall rules/queues etc on one router and BGP on another CCR it has been running great.

system resource print
uptime: 8w3d9h14m22s
version: 6.13

paulsa

in our case, UNTIL NOW, 6.13 seems stable, when used as BGP router; uptime 9 days

Yup, V6.13 seems stable for BGP

BGP CCR] > system resource print
uptime: 1w4d1h53m22s
version: 6.13

paulsa

Hi

Anyone running these yet? Our suppliers do not have stock yet.

I would love to know what speeds/latency you are getting on <10km P2P links. And if possible a QRT5 to e.g a RB912 dual polarised sector.

Thanks

paulsa

keep us posted paulsa.

No issues so far.

system resource print
uptime: 5d5h19m14s
version: 6.13
build-time: May/15/2014 16:03:12

paulsa

Hi paulsa, What is your latest result? So far so good, touch wood :) system resource print uptime: 3d2h16m25s version: 6.13 build-time: May/15/2014 16:03:12 free-memory: 3642.8MiB total-memory: 3969.0MiB cpu: tilegx cpu-count: 36 cpu-frequency: 1200MHz cpu-load: 0% free-hdd-space: 904.6MiB total-hd...

paulsa

We will be switching back from our cisco 7200 to the CCR on Sat morning for BGP. 1) CCR1036 2) 5 Feeds in total (local, international, peeing, a private peer, and Hurricane) 3) Was stable for 5 months on - then instability with random reboots (Tried a different CCR, new config, old config, ROS V6.1...

paulsa

we never enabled a watchdog on any MT router should I do it, on the bgp ccr? can I safely assume that, if I enable watchdog, next time that the ccr will have a BIG problem, it will reboot by itself, instead of crashing and needing somebody run there to power cycle it? of course, I would be happier,...

paulsa

This question seems to come up a lot in the MikroTIk forums and I'm curious to see what different types of CCR BGP deployments are out there as well as the experience of the end user. Some users seem to have no issues with multiple public feeds and some aren't stable on only one feed. So.... 1) Wha...

paulsa

Just out of curiosity, could you share your watchdog settings?

Sure

system watchdog print
watch-address: none
watchdog-timer: yes
no-ping-delay: 5m
automatic-supout: yes
auto-send-supout: no

paulsa

What did CPU utilization for BGP look like during these outages?

I suspect it was this however it happened so quickly we could not check in real time. Our ccr usually ran at around 4-5%, however on the cacti graphs before a reboot I could see it hitting 70%. I know in V6 bgp is not multicore....

paulsa

Hello all since yesterday I am using (in production environment) a CCR1016-12G with 6.13, as BGP router connected to two peers anybody else using a CCR as BGP router, with a recent build, can report that the initial issues had been solved? I am a bit worried... since in the first four months of 201...

paulsa

It's nice for our datacenter environment, will replace some of our other l2 switches.

paulsa

Netgear just recently released a pretty cheap 10 GbE Switch-Line that starts with 8 copper ports 81 SFP+ combo) for about 750 Euro incl. VAT here in Germany (XS708E). A 12 port model named XS712T is available for about 1350 Euro and has 2 SFP+ combo ports. Of course it depends on your needs and arc...

paulsa

And it would easily be the most expensive device MT has ever made..

Still would be cheaper than the $10K per 10GBe fibre cards for the cisco's we use!

paulsa

CCR1016-12S-1S+ has already been announced on MUM St. Louis. See: http://www.mikrotik.com/download/share/us13.pdf

Geat, remember seeing it a while back but google wasn't my friend today for trying to find it.

paulsa

Hi

Would really love to see a SFP only CCR. E.g >8 SFP ports for use in e.g our datacenter. Is there talk about this?

Search found 34 matches

Re: CRS version of CCR1072-1G-8S+

Re: Any new CRS switches comming out soon?

Any new CRS switches comming out soon?

Re: 10GB CRS

Re: v6.33rc release candidate (final testing)

Re: Traffic flow

Re: Req: Tips for improving NAT performance on CCR1036

Re: Real CCR1072 experience?

Re: v6.30.2 bugfix release

Re: CCR-1072 release date?

Re: CCR-1072 release date?

Re: CCR-1072 release date?

Re: 6.30 RC final fixes before release

Re: 6.30 RC final fixes before release

Re: v6.29 released

Re: CCR-1072 release date?

Re: Load balancing DNS requests

Re: 5Hz Equipment recomendation Q

Re: CCR and Internet BGP - survey of user experiences

Re: CLOUD CORE ROUTER

QRT5

Re: CLOUD CORE ROUTER

Re: CLOUD CORE ROUTER

Re: CCR and Internet BGP - survey of user experiences

Re: CLOUD CORE ROUTER

Re: CCR and Internet BGP - survey of user experiences

Re: CLOUD CORE ROUTER

Re: CLOUD CORE ROUTER

Re: CLOUD CORE ROUTER

Re: CRS vs Router

Re: SFP only router

Re: SFP only router

Re: SFP only router

SFP only router