Community discussions

MUM Europe 2020

Search found 22 matches

by asimko
Thu Jul 16, 2015 12:46 pm
Forum: General
Topic: Simple Queue not working when Fasttrack enabled
Replies: 28
Views: 20520

Re: Simple Queue not working when Fasttrack enabled

Hello,

Is there a possibility to have fasttrack enabled and limit user by IP? We are using simple queues to limit users in speed for what they have payed for, but we like fasttrack because it is eating much less cpu (installed ros today 6.30.1) and is really significant.

Thanks for reply.
by asimko
Fri May 22, 2015 4:26 pm
Forum: General
Topic: Speed problem
Replies: 6
Views: 713

Re: Speed problem

Checked that, but everything seem to be ok. Will try next week btest on local network. Will report status here. Thanks for now.
by asimko
Tue May 19, 2015 4:07 pm
Forum: General
Topic: Speed problem
Replies: 6
Views: 713

Re: Speed problem

There are no limits and no queues, clients RB has been reset to factory defaults, with no special configuration ... Speed still the same. Do you have any other ideas?
by asimko
Mon May 18, 2015 8:59 am
Forum: General
Topic: Speed problem
Replies: 6
Views: 713

Re: Speed problem

I have tested both, trough wireless and also wired. Both are the same, that is the strange thing. I tested also test with different computers and also OS (linux, windows). Still the same.
by asimko
Fri May 15, 2015 12:46 pm
Forum: General
Topic: Speed problem
Replies: 6
Views: 713

Speed problem

We have strange problem with speed on client RB. If I test it with btest from RB to RB everything is fine speed about 30Mbit TCP (from testing rb to clients rb), but if I test speed from clients computer connected to his RB speed is only 10-12 Mbit. We tested RB911 on clients site and RBSXT, both th...
by asimko
Mon Apr 20, 2015 9:12 am
Forum: RouterBOARD hardware
Topic: RB 912 UAG-5hpnd+ Rocket Dish problem with MCS
Replies: 22
Views: 5867

Re: RB 912 UAG-5hpnd+ Rocket Dish problem with MCS

.. rocket dish + Rb 912 uag.. .. When pick up to MSC 13 or MSC 14 ccq link bavome not stable and in fact have less trought ( only about 80 mb) still a 912 board related issue? (as mentioned above) .. would someone confirm if it's a possible explanation !? I can confirm this too! Upgraded to this RB...
by asimko
Wed Jan 28, 2015 2:17 pm
Forum: The Dude
Topic: How to show ROSVersion in Dude wireless registration table
Replies: 5
Views: 1722

Re: How to show ROSVersion in Dude wireless registration tab

Hmm that is not what I am looking for. In wireless registration tab you see all of the connected clients of all aps. What you wrote is only for certain AP if I open it.
by asimko
Wed Jan 28, 2015 12:42 pm
Forum: The Dude
Topic: How to show ROSVersion in Dude wireless registration table
Replies: 5
Views: 1722

Re: How to show ROSVersion in Dude wireless registration tab

That is not exactly what I need to see. I have a lot of APs, and I have a lot of clients. There is Wireless Registration table in Devices->RouterOS->Wireless Registration and there I want to see a column with ROS Version. Or is there any other view to achieve that?
by asimko
Tue Jan 27, 2015 12:40 pm
Forum: The Dude
Topic: How to show ROSVersion in Dude wireless registration table
Replies: 5
Views: 1722

How to show ROSVersion in Dude wireless registration table

Hello,

does anybody know how to display rosversion in dude of all connected mikrotik devices?

Thank you for answer.

Andrej
by asimko
Thu Aug 14, 2014 10:00 am
Forum: General
Topic: SOLVED Nv2 client freeze
Replies: 12
Views: 1937

Re: SOLVED Nv2 client freeze

OK today same problem, AP: RB433AH /interface wireless print name="wlan1" mtu=1500 mac-address=XXXXXXXX arp=enabled interface-type=Atheros AR92xx mode=ap-bridge ssid="XXXX" frequency=5680 band=5ghz-a/n channel-width=20mhz scan-list=default wireless-protocol=nv2 vlan-mode=no-tag vlan-id=1 wds-mode=di...
by asimko
Wed Aug 13, 2014 9:05 am
Forum: General
Topic: SOLVED Nv2 client freeze
Replies: 12
Views: 1937

Re: Nv2 client freeze

CPE is mostly SXT or RB711 or RB911, i upgraded yesterday one site to 6.18 and customer also to 6.18 with newest firmware, so far so good ... will report later ...
by asimko
Tue Aug 12, 2014 9:10 am
Forum: General
Topic: SOLVED Nv2 client freeze
Replies: 12
Views: 1937

Re: Nv2 client freeze

what wireless hardware are you using? Please make sure that you also upgrade the Routboard firmware to the latest version. What wireless configuration you are using. Try to reset the wireless interface configuration to the default settings and then report back. Wireless almost everywhere RB52Hn, or...
by asimko
Mon Aug 11, 2014 11:25 am
Forum: General
Topic: SOLVED Nv2 client freeze
Replies: 12
Views: 1937

Re: Nv2 client freeze

please describe your freezing detection methodics.[/quote]

It is simple, our customer calls, that internet is not working ... everything what we do, is disable and enable him on AP and everything is than ok. This is not happening if there is nstreme or simple 802.11, only NV2 do this ...
by asimko
Fri Aug 08, 2014 5:41 pm
Forum: General
Topic: SOLVED Nv2 client freeze
Replies: 12
Views: 1937

SOLVED Nv2 client freeze

Hello, has anybody problem with nv2 and client freeze? We have problem to use nv2 on some our APs, bacause of client freeze. If we disable and enable wireless, client is suddenly ok. ROS v is 6.18, new wireless package enabled, ROS is the same on AP and client. If we use nstreme, no freezes at all, ...
by asimko
Tue Jul 22, 2014 8:57 am
Forum: General
Topic: Bonding two wireless links?
Replies: 4
Views: 1308

Re: Bonding two wireless links?

Works good, only one thing, on CCR we have set all ports as slaves with one gateway, so I cannot set cost to path ... I will try to change that too.
Thank you for answers!
by asimko
Fri Jul 18, 2014 9:07 am
Forum: General
Topic: Bonding two wireless links?
Replies: 4
Views: 1308

Re: Bonding two wireless links?

Ok thank you! I will try that.
by asimko
Thu Jul 17, 2014 9:10 am
Forum: General
Topic: Bonding two wireless links?
Replies: 4
Views: 1308

Bonding two wireless links?

Hello everybody, can somebody help me to setup bonding for two parallel wireless links? I make a schema (in attachment) what I have. I want to use both of the wireless links together. Now I have setup BGP (http://wiki.mikrotik.com/wiki/Manual:BGP_Load_Balancing_with_two_interfaces), but it is not go...
by asimko
Mon Jun 02, 2014 2:16 pm
Forum: General
Topic: RDP problem
Replies: 8
Views: 2308

Re: RDP problem

It turns out, that it was another rule in firewall in my mikrotik, which was blocking communication.
Thank you for your answers!
by asimko
Wed May 28, 2014 8:38 am
Forum: General
Topic: RDP problem
Replies: 8
Views: 2308

Re: RDP problem

Problem is, that I do not have access to the customer Draytek router. Customer says that from other ISP there is no problem with the connection, also if I try another ISP, I can connect to RDP server. I can only investigate connection from me, but I cannot see what is wrong on the other side. What I...
by asimko
Tue May 27, 2014 7:39 pm
Forum: General
Topic: RDP problem
Replies: 8
Views: 2308

RDP problem

Hello everybody, I have strange problem. One of my clients (behind NAT) is trying to connect to Windows Server RDP which is also behind NAT and there is a port forward for port 3389 but it is by another ISP. Problem is that this is not working, it closes connection right away, his router is DrayTek,...
by asimko
Mon Dec 02, 2013 4:43 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 110820

Re: v6.7 released

Upgraded today on RB750UP, previous firmware was 5.24, suddenly I have port flapping, but only if I try to connect with winbox, if I use ssh everything is ok. I have some devices powered on ports, try to change poe status to forced-on and auto but nothing change. I upgraded also rb firmware, but sti...
by asimko
Wed Nov 13, 2013 10:03 am
Forum: General
Topic: 5.22 released!
Replies: 104
Views: 48613

Re: 5.22 released!

What's new in 5.22 (2012-Nov-23 09:28): *) wireless - fixed rare nv2 link stall; So, how serious is this? Every links goes down now and than. Should I now upgrade or not? (I just finished upgrading to 5.21...) Did the links stall under certain conditions? Or in general. In the first case I would li...