Community discussions

MikroTik App

Search found 593 matches

  • 1
  • 2
by bajodel
Sat Feb 24, 2024 1:36 pm
Forum: Announcements
Topic: v7.14rc [testing] is released!
Replies: 176
Views: 46670

Re: v7.14rc [testing] is released!

..[CUT] .. Is the IS-IS incomplete?
in the routing protocol status page it says "Initial support" - see https://help.mikrotik.com/docs/display/ ... l+Overview
It's now more than that, but probably still incomplete.
by bajodel
Fri Feb 23, 2024 1:37 pm
Forum: General
Topic: User poll about using Winbox
Replies: 97
Views: 53127

Re: User poll about using Winbox

@normis, are there Mikrotik plans to use all these infos to change/improve Winbox and profiles ?
by bajodel
Sun Feb 18, 2024 7:44 pm
Forum: Announcements
Topic: v7.14rc [testing] is released!
Replies: 176
Views: 46670

Re: v7.14rc [testing] is released!

/queue type add name=fq-codel-ethernet-default kind=fq-codel fq-codel-ecn=no /queue interface set [find default-queue=only-hardware-queue] queue=fq-codel-ethernet-default Hey guys, what boards have this as default? I was looking for those lines in a RB4011 default but it seems to me they are not th...
by bajodel
Sun Feb 18, 2024 7:37 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 253278

Re: v7.13.4 [stable] is released!

Can someone confirm this ? -> Rest API user stuck as 'active' The number increase proportionally to uptime, I've already seen 4k active users (via "unknown"). Sample output from RB4011 (7.13.4), uptime 10d [admin@RB4011] > /user/active/print Columns: WHEN, NAME, ADDRESS, VIA # WHEN NAME AD...
by bajodel
Tue Jan 16, 2024 2:44 pm
Forum: General
Topic: User poll about using Winbox
Replies: 97
Views: 53127

Re: User poll about using Winbox

..[CUT].. Maybe it would be a good idea to be able to save "connectionless" session with some preferred windows layout not bound to specific IP or MAC...[CUT]..
You can already, when you save a profile it's available for selection for other/new connections.
by bajodel
Tue Jan 16, 2024 6:04 am
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 253278

Re: v7.13.2 [stable] is released!

I had that problem as well, a month ago, when I upgraded to 7.13. So I did what it mentions and sent a supout file. Reply: "Thank you for your report, we will check what is causing the "script error"." Apparently they did not get around to doing that. I thought it would show onl...
by bajodel
Tue Jan 16, 2024 5:51 am
Forum: General
Topic: User poll about using Winbox
Replies: 97
Views: 53127

Re: User poll about using Winbox

1) All the time since the feature introduction.. long ago 2) Preset windows Layouts, I have specific ones for important devices and generic ones based on device type (small/big routers, switches, APs, CAPsMAN..) 3) Probably create some sample initial layout so that people can see the power of it 4) ...
by bajodel
Mon Jan 15, 2024 5:02 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 253278

Re: v7.13.2 [stable] is released!

(Device: hAP ac^2)
Log:
script error: error - contact MikroTik support and send a supout file (2)
error while running customized default configuration script: no such item
by bajodel
Wed Dec 27, 2023 8:19 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 147919

Re: v7.14beta [testing] is released!

Upgrading a RB951G (mipsbe) to 7.14 beta, I've seen this in the logs:
2023.12.27-1913-RB951G-mipsbe-logs.png

This is the link mentioned in the logs: https://wiki.mikrotik.com/wiki/Manual:R ... D_settings

I don't get it :-(
by bajodel
Thu Dec 21, 2023 12:33 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 253278

Re: v7.13 [stable] is released!

Other routing protocols ( BGP, OSPF ) cannot redistribute IS-IS routes
I wonder if they did it on purpose, like you're on parole, so don't hang out with your mates... yet ;-)
by bajodel
Wed Dec 20, 2023 7:03 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 147919

Re: v7.14beta [testing] is released!

next to loopback interfaces tab, we have also vrf interfaces tab .. ?! what the heck ? ;-)
by bajodel
Mon Dec 18, 2023 3:24 am
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 253278

Re: v7.13 [stable] is released!

Is anyone trying IS-IS cli? is it good?
I did a quick lab on the rc version (only between ros devices) and so far.. it was ok.
I had no time to test interoperability, it will be my next move.
by bajodel
Sat Nov 18, 2023 1:28 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 90692

Re: v7.12 [stable] is released!

For VRF, yes. But RouterOS can also policy-route depending on source address, incoming interface, or routing mark (assigned in firewall mangle rule). This is often used for loadbalancing/failover or for overlay networks, where VRF is much too restrictive. You're right, but I'd be fine with the func...
by bajodel
Tue Nov 14, 2023 5:44 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 90692

Re: v7.12 [stable] is released!

(already said a couple of time in the last months .. and sent support requests) Old v6 command " ip route check x.y.z.k" still missing! e.g. /ip route check 8.8.8.8 (linux equivalent "ip route get 8.8.8.8") It's very usefull when you have many routes in your routing table and you...
by bajodel
Sun Oct 22, 2023 2:43 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 160631

Re: v7.11.2 [stable] is released!

pe1chl is absolutely right! That is the typical unpredictable outcome you get into if you do that ;-)
It's definitely a possibility.

Hint: it's a boring task importing from export and validating line by line, but it's the only reliable one.
by bajodel
Sat Oct 21, 2023 10:57 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 160631

Re: v7.11.2 [stable] is released!

Hi, one of my CRS328-24P-4S+ don't know about PoE on interfaces 9-24, however PoE on theese ports still works... Same model, with same RoS version, but different device this problem haven't. Any idea? No idea, but I would recommend: 1) check if firmware version is up to date, otherwise upgrade (/sy...
by bajodel
Sat Oct 21, 2023 10:50 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 160631

Re: v7.11.2 [stable] is released!

I had to netinstall a couple of RB4011 because they had a weird partition scheme with two "part1" (instead of "part0" and "part1") that prevented them to work properly. The two RB4011 were used for labbing so they passed through multiple install of beta/rc ..so I'm not ...
by bajodel
Wed Jul 12, 2023 5:48 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 369
Views: 128272

Re: v7.10 and 7.10.1 [stable] is released!

There is ver 7.10.2 out on the web site ;-)
by bajodel
Fri Jul 07, 2023 2:21 am
Forum: Announcements
Topic: v7.11beta [testing] is released!
Replies: 373
Views: 104428

Re: v7.11beta [testing] is released!

wifiwave2 <- wifi interfaces ..maybe ? ;-)

Read above in the thread and on the 7.10 one (viewtopic.php?t=197095)
Many users reported that wifi stops working after some time.
by bajodel
Tue May 02, 2023 1:07 pm
Forum: Announcements
Topic: WinBox v3.38 released!
Replies: 50
Views: 46799

Re: WinBox v3.38 released!

Firewall rules lists are still 'cut in the middle' when first displayed. As soon as you move to another tab and go back to the previous one, the list is complete. My experience is that: "filter" list is cut at line 96, "nat" at line 46, "mangle" at line 73 Works OK for...
by bajodel
Tue May 02, 2023 12:30 pm
Forum: Announcements
Topic: WinBox v3.38 released!
Replies: 50
Views: 46799

Re: WinBox v3.38 released!

Firewall rules lists are still 'cut in the middle' when first displayed. As soon as you move to another tab and go back to the previous one, the list is complete. My experience is that: - "filter" list is cut at line 96 - "nat" at line 46 - "mangle" at line 73 Not a big...
by bajodel
Sat Mar 25, 2023 12:13 pm
Forum: Announcements
Topic: v7.9beta [testing] is released!
Replies: 118
Views: 25314

Re: v7.9beta [testing] is released!

Still no "/ip route check x.x.x.x" reappiring on the v.7 scene, super usefull for troubleshooting (and PRESENT in v.6).
It's simply the "ip route get" linux equivalent, come on ..a couple rows of code!
by bajodel
Wed Feb 15, 2023 8:43 pm
Forum: Announcements
Topic: v7.8rc is released!
Replies: 125
Views: 44252

Re: v7.8rc is released!

bajodel - As far as we are aware all of the major DNS issues are resolved. Also there are some new updates on docummentation page explaining how static entries work now (https://help.mikrotik.com/docs/display/ROS/DNS). Thank you strods, I'll take a look into that but my problem is that I'm not usin...
by bajodel
Wed Feb 15, 2023 5:55 pm
Forum: Announcements
Topic: v7.8rc is released!
Replies: 125
Views: 44252

Re: v7.8rc is released!

In the previous release there was a big talk about dns issues, now I don't see many of them.
I'm currently still using direct dns because if I try to revert back, lots of things go bonkers (Ms Teams, Amazon MyTV and sometimes also YouTube in a normal browser).

Any update on this ?
by bajodel
Sat Jan 14, 2023 4:31 pm
Forum: Announcements
Topic: WinBox v3.37 released!
Replies: 110
Views: 139380

Re: WinBox v3.37 released!

There are some cases where..[cut]
you're right, in fact I've already tried also with a blank new profile w/o success.
by bajodel
Sat Jan 14, 2023 1:41 pm
Forum: Announcements
Topic: WinBox v3.37 released!
Replies: 110
Views: 139380

Re: WinBox v3.37 released!

@rumahnetmks - nope, still happening here :-(
by bajodel
Wed Jan 04, 2023 12:28 am
Forum: Announcements
Topic: v7.7rc is released!
Replies: 259
Views: 88413

Re: v7.7rc is released!

I'd love to see VTI implemented on RouterOS, but I kinda lost hope. I'd even gladly swap Wireguard for VTI.
by bajodel
Fri Dec 30, 2022 8:32 am
Forum: Announcements
Topic: WinBox v3.37 released!
Replies: 110
Views: 139380

Re: WinBox v3.37 released!

Sure @pe1chl, I've plenty of RouterOS v.6 as well and this issue in not present.
In practice, I play around with RouterOS v.7 only in my Lab (just few rare exceptions where I can't help myself).

Thanks @rumahnetmks for confirming the issue (I see you wrote it was present since winbox 3.35).
by bajodel
Thu Dec 29, 2022 12:59 pm
Forum: Announcements
Topic: WinBox v3.37 released!
Replies: 110
Views: 139380

Re: WinBox v3.37 released!

Winbox is the latest 3.37, RouterOS is 7.7rc3 . I'm pretty sure the issue was also present on previous 7.7rcX, but I suspect it was not there on 7.6 but I could be wrong and I need to find a way to check. I don't remember seeing that on the filter tab, in mangle it's consistent every time I open a n...
by bajodel
Wed Dec 28, 2022 3:46 pm
Forum: Announcements
Topic: WinBox v3.37 released!
Replies: 110
Views: 139380

Re: WinBox v3.37 released!

I've just noticed that winbox is showing me only the first 68 rows of /ip/firewall/mangle on opening. As soon as I select some subchain (other than 'all') and get back to 'all', it shows me all the lines (106 rows). Yes, I'm using session templates but even of I select a new one ('own' new one) it s...
by bajodel
Wed Nov 23, 2022 9:39 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 122467

Re: v7.7beta [testing] is released!

Not exactly, it's just that routing marks now have maximum priority, so your packets are going to internet instead of to router, see 1) in https://forum.mikrotik.com/viewtopic.php?p=956630#p956630 You're absolutely correct, that's it!! I was still debugging and following the logic. So now, my marki...
by bajodel
Wed Nov 23, 2022 7:23 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 122467

Re: v7.7beta [testing] is released!

[cut] ..It could be that your input firewall drops the packet ..[cut] It's allowed, to be sure I added a specific rule to allow (on top, and the rule was hit and the log reported correctly the query) -> no answer from the local DNS server. Tomorrow I'll try to downgrade to 7.6 to see if something c...
by bajodel
Wed Nov 23, 2022 2:30 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 122467

Re: v7.7beta [testing] is released!

mkx) The same command works perfectly in Ros6 (you probably missed that the action is different, action=redirect already means "to the router itself" and you cannot specify an address). rextended) I'm quite sure I already used that rule in previous Ros7.x so I thought it was version depend...
by bajodel
Wed Nov 23, 2022 12:01 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 122467

Re: v7.7beta [testing] is released!

Premise: I've just updated my RB3011 from 6.49.7 to v.7.7beta6 on a 2nd partition just to test what I'll need to fix (some small adjustments to route scopes /target scopes and route tables/VRF and I'm almost done) I've just noticed that the DNS redirect on my home router is not working (v 7.7beta6)...
by bajodel
Tue Nov 01, 2022 11:10 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 122467

Re: v7.7beta [testing] is released!

this is the way OF and TIM deliver access customer to isp in Italy Hi, that's not quite the case .. They send you the traffic on a collection SVLAN where they then encapsulate a Customer VLAN. In your BRAS server you just need to create a single PPPoE Server and bridge the SVLAN + CVLAN. Then you c...
by bajodel
Fri Sep 02, 2022 11:39 am
Forum: Announcements
Topic: v7.5 [stable] is released!
Replies: 219
Views: 68363

Re: v7.5 [stable] is released!

Mikrotik devs, please .. bring back the useful [ /ip route check x.x.x.x ] command (or tell us how to do the same in v7).
Thanks


EDIT:
feature request ticket opened
SUP-91496
by bajodel
Sat Apr 30, 2022 1:29 pm
Forum: Forwarding Protocols
Topic: v7.1 MPLS/VPLS with IPv4/IPv6 ldp question
Replies: 3
Views: 2414

Re: v7.1 MPLS/VPLS with IPv4/IPv6 ldp question

I've seen an update about MPLS path selection on che the last changelog, was it linked to this issue ?
by bajodel
Fri Mar 04, 2022 10:19 am
Forum: Announcements
Topic: v6.49.4 [stable] is released!
Replies: 38
Views: 18144

Re: v6.49.4 [stable] is released!

no bootloop on arm (like RBD52G aka hAPac2) seen on 6.49.3, all went fine on a bunch of devices (arm, mipsbe)
by bajodel
Sat Feb 19, 2022 8:28 am
Forum: Announcements
Topic: v6.49.3 [stable] is released!
Replies: 64
Views: 21251

Re: v6.49.3 [stable] is released!

Just guessing, did you "import" the vm (ova or alike) or did you make the vm from scratch ?
by bajodel
Fri Feb 18, 2022 6:32 pm
Forum: Announcements
Topic: v6.49.3 [stable] is released!
Replies: 64
Views: 21251

Re: v6.49.3 [stable] is released!

A couple of RDB52 (aka hAP ac2) in my LAB went into bootloop after upgrade from 6.49.2 to 6.49.3, no special conf (AP and a GRE tunnel on it)
I had to netinstall them, so sorry no supout. They are on 6.49.3 now (netinstalled directly to that version) and working fine.
by bajodel
Sun Jan 16, 2022 1:05 pm
Forum: Forwarding Protocols
Topic: MPLS - massive throughput difference on CHR when using explicit nulls
Replies: 63
Views: 24586

Re: MPLS - massive throughput difference on CHR when using explicit nulls

Any update on this? I'm labbing with MPLS on CHRs (1Mb up limit) and I cannot figure it out. Thnx
by bajodel
Wed Jan 05, 2022 6:11 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223455

Re: v7.1.1 is released!

@dll2003

/export show-sensitive file=TheNameOfTheFileYouWant

command [F1] << for inline help
by bajodel
Tue Jan 04, 2022 2:41 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223455

Re: v7.1.1 is released!

Seems like Split-DNS regex matching for FWD functional doesn't work with enabled "Use DoH Server", all request immediately passed to DoH server. But for static records (TYPE A) with regex matching everything is ok, device reply regex matched answer.
+1 for using both at the same time.
by bajodel
Sun Jul 18, 2021 10:39 am
Forum: Announcements
Topic: v6.47.10 [long-term] is released!
Replies: 148
Views: 65475

Re: v6.47.10 [long-term] is released!

No, I do not see that. But it happens when you have some setting that is different from the default, and that also can happen when the default changes. It is difficult to say anything without seeing the two exports and the version numbers they were made on. Hi pe1chl, thanks for your reply. I thoug...
by bajodel
Sat Jul 17, 2021 6:07 pm
Forum: Announcements
Topic: v6.47.10 [long-term] is released!
Replies: 148
Views: 65475

Re: v6.47.10 [long-term] is released!

I had some strange export issue with wifi settings on this release , it's just me or someone noticed something similar too?
Nothing affecting the normal operation of the devices, but still.. odd.
I see exports with nstreme and tx-manual-power variables populated wich I've never set
by bajodel
Mon Mar 29, 2021 11:49 pm
Forum: RouterOS beta
Topic: Segment Routing and IS-IS
Replies: 22
Views: 10754

Re: Segment Routing and IS-IS

+2 (both)
by bajodel
Sun Mar 14, 2021 4:56 pm
Forum: General
Topic: Feature Request: IPSEC Improvements
Replies: 148
Views: 44625

Re: Feature Request: IPSEC Improvements

I see your point, supporting everything is not feasible. The main issue with VTI, as for many other things (LAC, IPv6 stuff, etc..), is that we can't wait another half decade to discover that those features are not going to be implemented. There is no (public) disclosure/planning with MT; we can't b...
by bajodel
Sun Mar 14, 2021 10:35 am
Forum: General
Topic: Feature Request: IPSEC Improvements
Replies: 148
Views: 44625

Re: Feature Request: IPSEC Improvements

I've already asked for VTI support a couple of years ago, now I'm begging for VTI support at least on v.7 Every week (sometimes more often) I came across a situation in witch I HAVE TO exclude Mikrotik because of the lack of VTI support. Side note: the worst case being ending up switching an already...
by bajodel
Tue Feb 16, 2021 11:06 pm
Forum: Announcements
Topic: v6.49beta [testing] is released!
Replies: 171
Views: 89078

Re: v6.49beta [testing] is released!

Low/High are actual voltage levels ..[cut].. depends on the specific SFP.
Nice, thanx
by bajodel
Tue Feb 16, 2021 5:25 am
Forum: Announcements
Topic: v6.49beta [testing] is released!
Replies: 171
Views: 89078

Re: v6.49beta [testing] is released!

Entering the command on CLI solves the problem: /interface ethernet set sfp-sfpplus1 sfp-rate-select=low Nice to know, but what does that setting really do? In the mikrotik interface wiki I read: sfp-rate-select (high | low; Default: high) Allows to control rate select pin for SFP ports. ..witch is...
by bajodel
Thu Jul 18, 2019 7:27 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 415
Views: 195527

Re: v6.45.1 [stable] is released!

My thinking is that using STP to create redundant links between two directly attached devices is (slight) abuse. In this case it would be better .. bonding.. I can agree on this, but consider that just phisically plugging ether1 of rb3011 to one port of the crs326 immediately kills the rb3011 (swit...
by bajodel
Thu Jul 18, 2019 5:39 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 415
Views: 195527

Re: v6.45.1 [stable] is released!

I don't know if these things are strictly related to 6.45.x but.. Yesterday I've added a secondary ethernet link from my main switch (CRS326) and my firewall (RB3011) in the knowledge my CRS326 would handle the backup link correctly (STP was already active on my CRS326); previously there was only th...
by bajodel
Tue Jul 09, 2019 4:52 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84413

Re: v6.44.5 [long-term] is released!

The [netinstall-6.44.5.zip] seems corrupted, please confirm ..thanks
by bajodel
Thu Apr 11, 2019 1:47 pm
Forum: Announcements
Topic: v6.44.2 [stable] is released!
Replies: 67
Views: 36693

Re: v6.44.2 [stable] is released!

Anyone experienced database corruption on dude with 6.44.2 ? After intalling 6.44.2, after some minutes of normal working dude service stopped; in log I saw corruption messages. Switching to 6.44.1 and reimporting didn't fix the problem. I've switched back to long-term 6.43.14, reimported the last b...
by bajodel
Fri Aug 10, 2018 8:29 pm
Forum: Announcements
Topic: v6.42.6 [current]
Replies: 102
Views: 63662

Re: v6.42.6 [current]

It adds what?
Sorry, it actually drops the WLAN interface
try to upgrade the routerboard firmware as well, go to system routerboard upgrade.. then reboot
then see what happens and take a look at log lines
by bajodel
Mon May 28, 2018 9:20 pm
Forum: Announcements
Topic: Winbox 3.14 released!
Replies: 77
Views: 58275

Re: Winbox 3.14 released!

*) make mouse wheel work anywere in connect window if login or password fields are in focus;

Now it works again ! Thanks
by bajodel
Wed Apr 11, 2018 3:24 pm
Forum: Announcements
Topic: Winbox 3.13 released!
Replies: 59
Views: 42433

Re: Winbox 3.13 released!

Yes, this behavior of focus is the best solution for most of the users. https://www.thestar.com/news/insight/2016/01/16/when-us-air-force-discovered-the-flaw-of-averages.html Don't do something for most of the users, make it customisable so all users can use it the way they like ;) + 1000 .. I'm wi...
by bajodel
Tue Apr 03, 2018 1:51 am
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 57002

Re: v6.41.3 [current]

I have 6.38.3 version, and I want to upgrade, but I want to avoid DHCP Server fail on bridge. What version is afected? Can I upgrade to 6.40.6 without risk of this bug?
IMHO yes, but better to ask here >> viewtopic.php?f=21&t=131129&start=50
by bajodel
Fri Feb 16, 2018 6:53 am
Forum: RouterBOARD hardware
Topic: Problem with CCR1072 SFP Interface
Replies: 6
Views: 4224

Re: Problem with CCR1072 SFP Interface

I've similar problem on a rb3011 connected to crs326 via DAC cable, disabling auto-negotiate on sfp interface and manually setting 1G (probably 10G in your setup I guess) the link came back fine. There is still a issue, now my rb3011 doesn't detect sfp down state (down link counter stay always on 0)...
by bajodel
Fri Feb 09, 2018 5:44 pm
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 71619

Re: Winbox 3.12 released!

i cant show it with video. please open winbox with many saved adresses. i have 48 items in my address book. mark one and try to scroll up-down with the mouse wheel. it does not. with 3.11 was possible. Using Win7x86, it works for me in win10 the behaviour is exactly as freemannn says, plus some str...
by bajodel
Fri Feb 09, 2018 5:14 am
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 71619

Re: Winbox 3.12 released!

going back to 3.11, focuses on 3.12 are just crazy.. :?
by bajodel
Tue Feb 06, 2018 11:40 am
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 71619

Re: Winbox 3.12 released!

Winbox 3.12 (on win10) doesn't scroll between saved items after selecting one of them, it seems the focus is elsewhere. After touching the vertical bar, scrolling works again.
It's only me? Please confirm.
by bajodel
Fri Feb 02, 2018 7:45 pm
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 71619

Re: Winbox 3.12 released!

Please add night mode. We cant manage our routers at night
+1 good point
by bajodel
Wed Jan 31, 2018 7:31 pm
Forum: SwOS
Topic: CRS326 Factory Reset SwOS?
Replies: 4
Views: 20623

Re: CRS326 Factory Reset SwOS?

I'd try via console cable, and then via netinstall if the first approach fails.
by bajodel
Wed Jan 24, 2018 9:25 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 138885

Re: v6.41 [current]

Could we expect that 6.40.5 will become "bugfix" or 6.40.6 with fixes from 6.41? 6.40.5 is the last with "old-known-bridge-implementation" technology and not all want to upgrade to "new-better-but-not-too-familiarized" one. +1 .. absolutely, and keep 6.40.x on bugfix f...
by bajodel
Thu Jan 11, 2018 6:29 pm
Forum: RouterBOARD hardware
Topic: hEX POE poe connection
Replies: 5
Views: 1804

Re: hEX POE poe connection

by bajodel
Wed Jan 10, 2018 10:22 pm
Forum: RouterBOARD hardware
Topic: hEX POE poe connection
Replies: 5
Views: 1804

Re: hEX POE poe connection

upgrade also firmware (system routerboard update), then do 2 full reboot
by bajodel
Wed Jan 03, 2018 2:13 am
Forum: Wireless Networking
Topic: Side Lobe bandwidth capacity
Replies: 4
Views: 1610

Re: Side Lobe bandwidth capacity

In your hypothetical example, IMHO, both clients would have similar bandwidth capabilities but the initial conditions should stay stable (freeze). You maybe should ask yourself why the conditions are so similar: - bad sector (huge side lobes, behaving as omni, ..) - client B (on side lobe) have bett...
by bajodel
Mon Jan 01, 2018 4:11 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 537
Views: 188450

Re: v6.42rc [release candidate] is released!

add some documents
+1 .. We know documentation takes time, but the rc features cannot be really well tested w/o at least basic suggestions
by bajodel
Thu Dec 21, 2017 6:36 am
Forum: General
Topic: DHCP server: have static IP on one subnet, dynamic IP on another subnet [SOLVED]
Replies: 5
Views: 2884

Re: DHCP server: have static IP on one subnet, dynamic IP on another subnet [SOLVED]

on the lease you have to restrict the assignment to the (1.x) specific dhcp instance, now I don't remember by hart the command .. but you'll find easily
by bajodel
Thu Dec 21, 2017 6:18 am
Forum: Wireless Networking
Topic: Block app from google play
Replies: 6
Views: 2338

Re: Block app from google play

All you can do is already written in above posts.
For lazy guys looking for ready made / step-by-step guides >> YouTube.com
by bajodel
Thu Dec 21, 2017 4:45 am
Forum: General
Topic: New Packet flow diagram
Replies: 99
Views: 87917

Re: New Packet flow diagram

This small update with possible can someone help better understand the place of new blocks "RAW Prerouting" and "RAW Output". @noviy I noticed only now your 2017/03 diagram update (I know, I'm late :lol: ) .. but I want to thank you for the brilliant work!! Now with new details ...
by bajodel
Thu Dec 21, 2017 2:15 am
Forum: General
Topic: DHCP + RADIUS - renew does not check RADIUS
Replies: 12
Views: 7134

Re: DHCP + RADIUS - renew does not check RADIUS

.. if I use lease->arp entry creation to enforce DHCP use, I cannot delete leases at any time prior to their actual expiration because it will break connectivity for the user. .. would not give any indication as to why things stopped working. I see, in this scenario neither CoA (if supported in dhc...
by bajodel
Thu Dec 21, 2017 12:48 am
Forum: Announcements
Topic: v6.40.5 [current]
Replies: 82
Views: 42262

Re: v6.40.5 [current]

Little "/export" issue:
in "ip dhcp-server" section, any setting to "bootp-support" (e.g. set bootp-support=none lan_dhcp) will not be exported
by bajodel
Wed Dec 20, 2017 9:05 pm
Forum: General
Topic: DHCP + RADIUS - renew does not check RADIUS
Replies: 12
Views: 7134

Re: DHCP + RADIUS - renew does not check RADIUS

I'm sorry I've no answers, but I have a question: :D

the lease duration is set by MT dhcp server (settings) or by Radius?

I guess deleting leases via script lead to a overlapping addresses risk (can radius take care of this?)
by bajodel
Mon Dec 18, 2017 3:56 am
Forum: General
Topic: IPSEC tunnel routing issue - help needed
Replies: 9
Views: 6550

Re: IPSEC tunnel routing issue - help needed

so go the three policies way
Another option would be ike2 which is currently going to support multiple split-networks (see last rc changelog)
by bajodel
Sun Dec 17, 2017 11:15 am
Forum: General
Topic: IPSEC tunnel routing issue - help needed
Replies: 9
Views: 6550

Re: IPSEC tunnel routing issue - help needed

not three tunnels but three policies, or maybe you can "summarize" your 3 remote subnets into one bigger supernet
by bajodel
Wed Dec 13, 2017 7:57 am
Forum: Wireless Networking
Topic: Block app from google play
Replies: 6
Views: 2338

Re: Block app from google play

nice trick, indeed! surely worth a try.

I was guessing.. as ip are assigned by dhcp (so dhcp can add arp dynamically) probably the arp-reply method could work too. You say 1:1 nat needs full arp functionality but probably that is enough, did you test it?
by bajodel
Tue Dec 12, 2017 3:00 pm
Forum: Wireless Networking
Topic: NV2 sync issues and solutions
Replies: 91
Views: 18539

Re: NV2 sync issues and solutions

https://www.fool.com/investing/2017/02/ ... rying.aspx
.."will be rolling out a brand-new technology called LTU this year"..
by bajodel
Mon Dec 11, 2017 4:23 pm
Forum: Wireless Networking
Topic: Block app from google play
Replies: 6
Views: 2338

Re: Block app from google play

hand out random /32
how do you manage that?


I absolutely agree on all other points, I usually would add:
- set proxy-arp to reply only on hotspot interface and set dhcp to add arp for leases
by bajodel
Fri Dec 08, 2017 11:26 am
Forum: General
Topic: mikrotik ipsec and strongswan
Replies: 7
Views: 7001

Re: mikrotik ipsec and strongswan

I presume you specifically need (tunnel/encryption and) a virtual interface (l2tp) otherwise ipsec/ikev2 policy would be simpler. Maybe you can bring up ikev2 tunnel and then place l2tp over it (2 steps, w/o mt encryption checkbox auto-create) so you can separately debug. Now I'm not at office but a...
by bajodel
Thu Dec 07, 2017 3:45 pm
Forum: General
Topic: mikrotik ipsec and strongswan
Replies: 7
Views: 7001

Re: mikrotik ipsec and strongswan

There are no timestamps on strongswan side. I see Phase1 won't go up, I also see l2tp connection starting in mt .. are you trying to l2tp over ipsec ? strongswan cannot handle l2tp directly, you need separate daemon like xl2tpd. I would try to use ike2 as it's more robust on nat scenario, I've alrea...
by bajodel
Wed Dec 06, 2017 12:18 am
Forum: General
Topic: mikrotik ipsec and strongswan
Replies: 7
Views: 7001

Re: mikrotik ipsec and strongswan

mikrotik ros version? strongswan version?

try to increase log verbosity on strongswan side (and then on mt side) and report back
by bajodel
Tue Dec 05, 2017 10:53 pm
Forum: Wireless Networking
Topic: Xiaomi phone low Wifi TX rate [SOLVED]
Replies: 99
Views: 53956

Re: Xiaomi phone low Wifi TX rate [SOLVED]

.. ..
seriously as a customer i don't understand and that obliges me to search alternatives, as an act of responsibility towards my clients
.. ..
+1
by bajodel
Fri Dec 01, 2017 10:58 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

In their shoes I would concurrently release a new 6.40.x in bugfix and stable, forcing all system to switch to bugfix channel as update default (6.40.x should then live in bugfix for long time). For admins ready to 6.41 it would be simple enough as manually switch to current again; in this way all s...
by bajodel
Fri Nov 24, 2017 9:33 pm
Forum: Wireless Networking
Topic: Band Steering implementation?
Replies: 80
Views: 37394

Re: Band Steering implementation?

+1 for tunable beacon intervals (better than nothing) .. I dont know if it's already in feature requests, but it should be
by bajodel
Fri Nov 03, 2017 8:44 pm
Forum: Virtualization
Topic: CHR feature requests
Replies: 81
Views: 36604

Re: CHR feature requests

VirtIO SCSI support, please, ASAP: viewtopic.php?f=15&t=124905&p=626094#p626094
+1
by bajodel
Sat Oct 28, 2017 12:48 pm
Forum: General
Topic: Help with mangle
Replies: 2
Views: 1159

Re: Help with mangle

(instead of print use export)

provide >> /export hide-sensitive
by bajodel
Wed Oct 25, 2017 4:30 am
Forum: General
Topic: IPSEC +GRE issue R6.40.4
Replies: 2
Views: 1450

Re: IPSEC +GRE issue R6.40.4

try also to set allow-fast-path=yes on GRE or IPIP
by bajodel
Sat Oct 21, 2017 1:41 pm
Forum: Beginner Basics
Topic: SFP-port not switched at hEX PoE [SOLVED]
Replies: 8
Views: 3175

Re: SFP-port not switched at hEX PoE [SOLVED]

I suspect there are problems for hEX poe running 6.40.4, I've recently downgraded two units to bugfix 6.39.3 because poe autodetection on ether2/3 showed false shortcircuits (4/5 weren't affected). I would recommend to try bugfix 6.39.3 and report back
by bajodel
Fri Oct 20, 2017 11:24 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

Has anyone tested ROMON in 6.41rc47? Seems that is not working. Also, can someone explain how QinQ vlans would be programmed in the new Bridge vlan implementation? Put a bridge in your bridge? and if I need a single service tag on packets ? I've never played with new bridge but I suppose there is a...
by bajodel
Thu Oct 19, 2017 12:09 pm
Forum: Announcements
Topic: RouterOS (v6.39.3, v6.40.4, v6.41rc) NOT affected by WPA2 vulnerabilities
Replies: 58
Views: 149811

Re: RouterOS (v6.39.3, v6.40.4, v6.41rc) NOT affected by WPA2 vulnerabilities

Thanks for fast fix and clear informations, well done!
by bajodel
Thu Oct 19, 2017 11:55 am
Forum: Announcements
Topic: SwOS version 2.6 released!
Replies: 30
Views: 21451

Re: SwOS version 2.6 released!

Since v2.5 switch address acquisition mode by default is DHCP with fallback to static address. It is the reason why you, probably, see 0.0.0.0 address for about 10 seconds right after booting. I've missed the " Since v2.5 switch address acquisition mode by default is DHCP " in changelog, ...
by bajodel
Wed Oct 18, 2017 3:31 pm
Forum: Announcements
Topic: SwOS version 2.6 released!
Replies: 30
Views: 21451

Re: SwOS version 2.6 released!

I've managed to XMODEM SwOS v2.4 to my CRS326 (if I XMODEM v2.6 the device boot up without an IP ..even after a [r] reset config). Booting up SwOS 2.4 and tring to upgrade to v2.6 from web control panel the upgrade succeed but the device looses his IP address (reset do not solve), see below serial c...
by bajodel
Wed Oct 18, 2017 2:40 pm
Forum: Announcements
Topic: SwOS version 2.6 released!
Replies: 30
Views: 21451

Re: SwOS version 2.6 released!

Hello bajodel, in case you have something plugged into CRS326 SFP+ ports, unplug it. Then try to boot SwOS and perform upgrade to v2.6. It should solve SwOS booting issues with active SFP+ ports. I've nothing plugged into SFP+ , the only cable connected is in ether1. Tried booting SwOS (also forcin...
by bajodel
Wed Oct 18, 2017 11:32 am
Forum: Announcements
Topic: SwOS version 2.6 released!
Replies: 30
Views: 21451

Re: SwOS version 2.6 released!

I've tried to switch to SwOS on a CRS326 but it goes in boot loop, I've connected serial cable and tried to fix but it seems there is no SwOS installed. I've seen in RoterBoot there are two possibility to flash new SwOS, via ethernet (tftp I suppose) and via serial cable but I've not found detailed ...
by bajodel
Mon Oct 16, 2017 10:22 am
Forum: General
Topic: CRS326 - 6.40.4 -- does it support LACP? [SOLVED]
Replies: 4
Views: 4118

Re: CRS326 - 6.40.4 -- does it support LACP? [SOLVED]

AFAIK. . yes but via software w/o hardware assistance
by bajodel
Mon Oct 16, 2017 10:07 am
Forum: Beginner Basics
Topic: Newbie questions about PCC [SOLVED]
Replies: 2
Views: 1730

Re: Newbie questions about PCC [SOLVED]

Why prerouting and not input ? The text says that these connections are "connection initiated from outside"... Connections from outside can go to the router (input) or can pass through to a device behind (forward), using prerouting you intercept both. Why distances are different? On sever...
by bajodel
Sat Oct 14, 2017 6:42 am
Forum: General
Topic: RouterOS x86 vs x86_64 discussion (RE: CHR suggestions for new functionality)
Replies: 18
Views: 7731

Re: RouterOS x86 vs x86_64 discussion (RE: CHR suggestions for new functionality)

Tom, have you found the "bad-ass box" :D ? I'm very curious about drivers for physical 10-gig cards..
by bajodel
Sat Oct 14, 2017 12:42 am
Forum: RouterBOARD hardware
Topic: Mikrotik VDSL / DSL Modem?
Replies: 381
Views: 198477

Re: Mikrotik VDSL / DSL Modem?

Proscend endorses Versatek for US distribution:
https://www.versatek.com/product/vx-160 ... lco-grade/
They just restocked apparently.
I must check if they ship to EU, thank you anyway..
by bajodel
Fri Oct 13, 2017 2:38 am
Forum: Beginner Basics
Topic: Block internet access on specific physical port
Replies: 16
Views: 13115

Re: Block internet access on specific physical port

.. or maybe use the in "in-bridge-port=" matcher in previous zerobyte configuration schema (std forward filter)?
by bajodel
Tue Oct 10, 2017 7:50 am
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 49235

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

I'm curious, does this work on 360 meters distance?
probably not, and even if it works it will poorly perform (fraction of the nominal speed) and it will be unreliable IMHO
by bajodel
Tue Oct 10, 2017 7:44 am
Forum: RouterBOARD hardware
Topic: Mikrotik VDSL / DSL Modem?
Replies: 381
Views: 198477

Re: Mikrotik VDSL / DSL Modem?

Got the Procend 180-T ..[cut].. I will post some results..
Interesting, I'll wait for news.

Have anyone links of EU/shops where these modules are available? thanks..
by bajodel
Mon Oct 09, 2017 7:47 pm
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 49235

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

I suggest checking with your local authorities. There are new laws coming soon, some countries have already implemented them. For example check the left map on page 11: http://www.etsi.org/images/files/ETSIWhitePapers/etsi_wp9_e_band_and_v_band_survey_20150629.pdf Ok, thank you. You need to study y...
by bajodel
Mon Oct 09, 2017 12:47 pm
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 49235

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

..[CUT].. Only a few countries in the EU have stricter rules.
Please normis, could you be more specific ? I'm in EU/Italy and this information would be usefull (also for other EU citizens).
Thank you.
by bajodel
Sun Oct 08, 2017 10:42 am
Forum: RouterBOARD hardware
Topic: Mikrotik VDSL / DSL Modem?
Replies: 381
Views: 198477

Re: Mikrotik VDSL / DSL Modem?

any feedback from live/prod systems using these sfp modules?
by bajodel
Sat Oct 07, 2017 7:20 pm
Forum: Announcements
Topic: v6.40.4 [current]
Replies: 103
Views: 44816

Re: v6.40.4 [current]

After upgrading from a fairly old version (6.36.2) to 6.40.4, we are experiencing massive IPsec issues.[CUT]... On the IPsec - Policies tab the failing policies do not have an "Active" state, and the PH2 State is "no phase2". But for the same tunnel, some policies are still work...
by bajodel
Wed Oct 04, 2017 9:25 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

..cut.. SFP transceiver, why do you have auto-negotiation disabled and what is connected to opposite side? Have you tried to turn auto-negotiation=on? On RB3011 sfp to a CRS326-24G-2S+ via DAC cable doesn't work if you set auto-negotiation , furthermore the RB3011 doesn't detect if link go down (CR...
by bajodel
Mon Oct 02, 2017 6:40 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

It's been 4 hours and the CRS326-24G-2S+ (on 6.41rc37) is now beheaving well: - RSTP now works stable between CRS326 and CRS125 (also on 6.41rc37) - it's now possible to edit MAC addresses on CRS326 ethernet ports (and the device doesn't stuck on reboot) - no port flapping (yet) very curious about t...
by bajodel
Mon Oct 02, 2017 2:11 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

Upgraded CRS326-24G-2S+ to 6.41rc37 , after reboot in the log I've noticed all ports have been removed from bridge hw-offloading and re-inserted. I've also noticed Firmware 3.43 was available for CRS326-24G-2S+ and I've upgraded it also and rebooted. Now I've enabled RSTP again and I'm going to re-i...
by bajodel
Fri Sep 29, 2017 2:09 am
Forum: General
Topic: Mikrotik RB-951G Site to Site IPSec VPN Tunnel Problem : PH2 State No Phase 2
Replies: 2
Views: 4089

Re: Mikrotik RB-951G Site to Site IPSec VPN Tunnel Problem : PH2 State No Phase 2

paste your actual config ( via /export hide-sensitive)
by bajodel
Thu Sep 28, 2017 3:12 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

I've noticed one more thing (CRS326 - 6.41rc34 - RSTP now enabled):
>> keeping winbox logged to CRS326 the problem does not show up
>> closing winbox .. flapping starts
by bajodel
Thu Sep 28, 2017 1:03 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

(see previous post) Confirmed.. after some hours, disablig RSTP it's now stable.
by bajodel
Wed Sep 27, 2017 8:14 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

Board: CRS326-24G-2S+ Previous ROS: 6.41rc32 Status: quite stable, all port in bridge w/ RSTP enabled and 2 active link to CRS125 (active/alternate) Upgraded to 6.41rc34, every 3-5 minutes my laptop (direct patch cord to a CRS326 port) detects lost link; on a separate windows I've constant ping to m...
by bajodel
Wed Sep 27, 2017 12:41 am
Forum: General
Topic: Feature requests
Replies: 1739
Views: 624738

Re: Feature requests

Hey, Mikrotik team! Please extend "netwatch" funtionality a little bit. It is a nice feature, but so undeveloped. It will be nice to have an option to set amount of ping to send before change status to down and at its frequency. ..and the possibility to set source address (e.g. remote ips...
by bajodel
Thu Sep 21, 2017 10:47 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

Just updated a CRS125 test unit to 6.41rc31 (from 6.40.3); firmware upgrade and master-port-TO-new-bridge config auto-conversion went smoothly. NOTE: CRS125 config has custom MAC addresses set for all interfaces and this has not compromised upgrade/conversion, on CRS326 instead custom MAC addresses ...
by bajodel
Tue Sep 19, 2017 9:30 am
Forum: SwOS
Topic: Info: CSS326 and Ubiquiti UF-MM-10G SFP+ module working
Replies: 4
Views: 4916

Re: Info: CSS326 and Ubiquiti UF-MM-10G SFP+ module working

..CUT.. The switch constantly runs at 61°C and the SFP+ module at 49°C (my rack temperature is ~24°C)
They seem ok, also my CRS326 lives at that temperature. I agree that it's probably a little higher than previous crs models but the architecture is different.
by bajodel
Mon Sep 18, 2017 7:11 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

bajodel - Can you please send to support@mikrotik,.com precise commands which you execute to reproduce this problem? We added all ports into bridge, added DHCP client on bridge, rebooted device and it is working just fine. Board: CRS326-24G-2S+ 1) netinstalled 6.40.3 2) upgraded to 6.41rc30 3) rese...
by bajodel
Mon Sep 18, 2017 5:27 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

Sure, as soon as possible I'll try to redo the same setup.
Now I remember that I also changed default MACs on etherXX interfaces and set admin-MAC on bridge one.
by bajodel
Mon Sep 18, 2017 4:12 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 206659

Re: v6.41rc [release candidate] is released! New bridge implementation!

Just tested CRS326-24G-2S+ on 6.41rc30 - started from clean config (reset w/o default) - simple config: all port in a bridge, RSTP active - ip dhcp client on bridge interface - set identity and users Reboot >> device dead Via console I see the device is booting correctly >> startup services >> login...
by bajodel
Mon Sep 18, 2017 4:02 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 43277

Re: v6.40.3 [current]

On CRS326-24G-2S+ / ros 6.40.3 and RouterBOOT booter 3.41, the memory test fail (tested on 2 different board); I guess the test is broken otherwise I've two defecting board memory. ..[CUT].. Hi, we found this test do not work correctly and most likely device memory works without errors. It will be ...
by bajodel
Mon Sep 18, 2017 1:59 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 43277

Re: v6.40.3 [current]

On CRS326-24G-2S+ / ros 6.40.3 and RouterBOOT booter 3.41, the memory test fail (tested on 2 different board); I guess the test is broken otherwise I've two defecting board memory. ## choice "t" (do memory testing) Error in address=0x016FFEEC, W=0x016FFEEC R=0x01009C5C X=0x006F62B0 Error i...
by bajodel
Mon Sep 18, 2017 10:41 am
Forum: Virtualization
Topic: Problem CPU CHR 100 % whit 27 GHZ xeon processor
Replies: 36
Views: 14449

Re: Problem CPU CHR 100 % whit 27 GHZ xeon processor

Dear Tom Jones,

Can you please tell me the same command for esxi 5.xx as your provided command is not working on esx 5.1
ESXi 5.0/5.1:
vsish -e set /net/tcpip/sysctl set _net_inet_tcp_delayed_ack=0

ESXi 5.5:
vsish -e set /net/tcpip/instances/defaultTcpipStack/sysctl/_net_inet_tcp_delayed_ack 0
by bajodel
Wed Sep 13, 2017 1:25 am
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 43277

Re: v6.40.3 [current]

On RB3011/6.40.3 the sfp interface (DAC cable to CRS125 in my current test) doesn't correctly detect the down status, the CRS125/6.40.3 instead correctly detects if cable unplugged, other device is rebooted (temporary down), etc.. It was the same on 6.40.2 and I'm quite sure also 6.39.2 was affected...
by bajodel
Fri Sep 01, 2017 3:42 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 43277

Re: v6.40.3 [current]

Updated some test boards on my desk (RB750Gr3, RB951G-2HnD, RBmAP2n), they are working well.
Thanks for this new 'current.point' release.
by bajodel
Sat Aug 19, 2017 1:10 pm
Forum: Wireless Networking
Topic: 16 Buildings centralized wireless solution
Replies: 3
Views: 1316

Re: 16 Buildings centralized wireless solution

The op wrote "150MB throughput" (not 150 mbps), if not a typo this means about 2 Gbit.
As pukkita said ..this is not going to happen . (full stop)
by bajodel
Wed Jul 26, 2017 5:57 pm
Forum: Announcements
Topic: v6.40 [current]
Replies: 102
Views: 41068

Re: v6.40 [current]

Reverting to bugfix, dynamic address-lists work as expected.
Anyone can confirm on different board ?
by bajodel
Wed Jul 26, 2017 5:17 pm
Forum: Announcements
Topic: v6.40 [current]
Replies: 102
Views: 41068

Re: v6.40 [current]

Probably there is a problem on dynamic address-list:

1) ok for dynamic address-list feeded by firewall rule (add src to address-list)
2) items istantly disappear if dynamic address-list are loaded from cli/script/winbox (I'm testing with 8days timeout)

(testing on a hEX with 6.40)
by bajodel
Wed Jul 19, 2017 3:36 am
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 64731

Re: v6.40rc [release candidate] is released! (New bridge implementation)

.. less in profits .. I see yours point, but .. hEX/RB750Gr3 >> 5 Gbit ethernet, poe in, CPU with 4 Threads 2 core 880 MHz, usb port, sd port, 256 mb ram, voltage sensor and pcb temp sensor.. and 16mb flash !? I think there were other rooms for saving 2 $ , why put 256 mb ram and quad core cpu .. t...
by bajodel
Tue Jul 18, 2017 12:17 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 64731

Re: v6.40rc [release candidate] is released! (New bridge implementation)

This was very easy to roll back with a partition. Just make the partition..
You are right, but try to use partitioning on a hEX (or any other "zero flash") devices!
There is no common sense in putting 16mb flash on new devices.. IMHO .. the real reason is obviously NOT save 2 bucks
by bajodel
Sat Jul 08, 2017 4:56 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 64731

Re: v6.40rc [release candidate] is released! (New bridge implementation)

..cut.. What to do? ..cut.. IMHO stay with previous setup/version untill implementation is stable and complete; to edit bridge/switch functionality adding MSTP and igmp snooping is surely not easy step fo mt guys. Anyway I guess your abnormal broadcast is coming from uplink swich(es), maybe you can...
by bajodel
Sat Jul 08, 2017 1:22 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 211512

Re: Blacklist Filter update script

@IntrusDave - I was testing/reading your last (beta) 'blacklistUpdate' script, at the end (quoted section below) ..[CUT].. # Turn the logging back on :if (\$blDebug = 1) do={ \$log t=\"Enabling firewall info logging...\"; } /system logging set numbers=0 topics=\$cl; ..[CUT].. I cannot figu...
by bajodel
Sat Jul 01, 2017 7:16 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 76965

Re: v6.40rc [release candidate] is released!

Please do some minimal work on the IPv6 routing..
+1
by bajodel
Mon Jun 19, 2017 7:56 pm
Forum: Announcements
Topic: v6.39.2 [current]
Replies: 122
Views: 57322

Re: v6.39.2 [current]

..
Can not install dude-6.39.2: system 6.39.2 is not installed, but is required
Any ideas?
Probably wrong arch, try this:
https://download2.mikrotik.com/routeros ... .2-arm.npk
by bajodel
Thu Jun 15, 2017 7:43 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 76965

Re: v6.40rc [release candidate] is released!

.. [CUT].. We could think how to sync the APs that are on different frequencies but located on the same tower and connected to the same ethernet network. absolutely +1 Another thing; on current stable/rc scheduler has some issues, if you create new item it works but if you create from 'copy' it nev...
by bajodel
Wed Jun 07, 2017 9:51 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition
Replies: 52
Views: 19921

Re: RB1100AHx4 Dude Edition

Since for me this is an ethernet router I don't miss usb for lte stuff (and there are plenty of other storage interfaces), but I strongly agree SFP is the biggest missing feature (2x SFP+ in my dreams). I'm not an LCD big fan (I always disable it) because pegs cpu in small devices and it's almost us...
by bajodel
Mon May 08, 2017 10:27 pm
Forum: General
Topic: Preventing losses of DHCP leases in order not to have hotspot log out users
Replies: 3
Views: 2118

Re: Preventing losses of DHCP leases in order not to have hotspot log out users

have you set autoritative=yes on mt dhcp server ? (default is delay 2 seconds)
by bajodel
Fri Mar 31, 2017 2:30 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 25076

Re: MUM Europe 2017 Live!

..CUT.. Hey now, do not put words into my mouth. I never said anything about RouterOS 7. You can re-watch the announcement video and see. ok, so I cannot confirm :-) Probably my memory needs an upgrade, anyway I remember "someone" who said that ..and he was only joking. Is now any better ...
by bajodel
Fri Mar 31, 2017 2:20 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 25076

Re: MUM Europe 2017 Live!

IntrusDave is right .. no news/rumors for ros7 here Yes there was news! One guy said they had been so busy on developing new hardware that they had not worked on version 7 so there was no progress.. CUT.. I can confirm normis said that yesterday during opening session ..but he was only joking, prob...
by bajodel
Fri Mar 31, 2017 2:15 am
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 25076

Re: MUM Europe 2017 Live!

Be creative, invite someone from MikroTik for a drink (or two, three, ... you get the idea) and get some info from them! :)
very hard task, they are from latvia ..they can drink forever! :lol:
by bajodel
Thu Mar 30, 2017 10:20 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 25076

Re: MUM Europe 2017 Live!

IntrusDave is right .. no news/rumors for ros7 here
by bajodel
Thu Mar 30, 2017 8:11 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 25076

Re: MUM Europe 2017 Live!

CRS328-24P-4S+RM
-- SFP ports support only 10Gbit modules or also 1Gbit modules?
-- have also Separate PSU for passive or 802.3af/at PoE out?
- both (AFAIK)
- single input iec connector
by bajodel
Thu Mar 30, 2017 6:38 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 25076

Re: MUM Europe 2017 Live!

Some photos from live exhibition..

viewtopic.php?f=3&t=118852&p=591263#p591253
by bajodel
Thu Mar 30, 2017 12:15 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2017: new hardware incoming!
Replies: 86
Views: 30352

Re: MUM Europe 2017: new hardware incoming!

Sorry for current bad photo, after lunch new products (real) will be showed live..
by bajodel
Wed Mar 29, 2017 8:26 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2017: new hardware incoming!
Replies: 86
Views: 30352

Re: MUM Europe 2017: new hardware incoming?

Will there be a live stream of MUM Europe 2017?
probably.. otherwise I can post some hot shots (new products info) :D
by bajodel
Thu Mar 16, 2017 8:06 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 390
Views: 137815

Re: v6.39rc [release candidate] is released

!) bridge - fixed BPDU rx/tx when protocol-mode=none

can we have more information on this? thanks
by bajodel
Fri Mar 10, 2017 1:38 am
Forum: Announcements
Topic: v6.37.5 [bugfix] is released!
Replies: 35
Views: 22687

Re: v6.37.5 [bugfix] is released!

.. would be great to have also a 6.36 branch update/fix. I guess I'm not the only one keeping all 5ghz radio there to skip new forced radar stuff (waiting untill very stable)
by bajodel
Fri Mar 10, 2017 1:32 am
Forum: Announcements
Topic: v6.37.5 [bugfix] is released!
Replies: 35
Views: 22687

Re: v6.37.5 [bugfix] is released!

Upgraded successfully some 3011, 2011, hex poe, hex, 912xx and a couple of x86.
No problems, so far. Thanks for Vault7 immediate fix.
by bajodel
Mon Mar 06, 2017 7:56 pm
Forum: Wireless Networking
Topic: Confused about rts/cts
Replies: 64
Views: 37605

Re: Confused about rts/cts

Nathan, I guess that as these settings exist on standalone ap (even if we actually don't use/need them) they had been ported to (ap mode) capsman (?)
by bajodel
Tue Feb 28, 2017 11:01 pm
Forum: General
Topic: Wireless beacon interval and DTIM missing
Replies: 24
Views: 14347

Re: Wireless beacon interval and DTIM missing

Anyone else missing this feature with other basic APs feature?
yep +1
by bajodel
Sun Feb 12, 2017 11:31 am
Forum: General
Topic: Dstnat in output chain? [SOLVED]
Replies: 23
Views: 12692

Re: Dstnat in output chain? [SOLVED]

interesting feature +1
by bajodel
Wed Feb 08, 2017 8:24 pm
Forum: General
Topic: TCP window scaling for shaping downloads
Replies: 6
Views: 4510

Re: TCP window scaling for shaping downloads

..cut..
A mangle rule which lets you modify any offset of a packet and a condition which works like the wireshark splice option would be really nice for us geeks :)
indeed, very useful and maybe a new CoDel/fq_codel queue type..
Maybe on ros7 :D
by bajodel
Tue Feb 07, 2017 4:27 pm
Forum: Announcements
Topic: Winbox 3.10 released!
Replies: 69
Views: 58083

Re: Winbox 3.10 released!

( http://forum.mikrotik.com/viewtopic.php?f=21&t=116994&p=581809#p581808 ) Note: Sorry for crossposting, but probably I've wrong posted earlier and this is a winbox problem. "/ip accounting" settings are not correctly shown by winbox (current/lastest 3.10), testing on board CRS125....
by bajodel
Sat Feb 04, 2017 1:59 pm
Forum: Announcements
Topic: v6.37.4 [bugfix] is released!
Replies: 38
Views: 25937

Re: v6.37.4 [bugfix] is released!

damn! :lol: .. probably also "/ip traffic-flow" have the same behaviour (winbox 3.10, board is 3011).
bye..
by bajodel
Sat Feb 04, 2017 1:56 pm
Forum: Announcements
Topic: v6.37.4 [bugfix] is released!
Replies: 38
Views: 25937

Re: v6.37.4 [bugfix] is released!

"/ip accounting" settings are not correctly shown by winbox (current/lastest 3.10 , board is CRS125). I've no way now to go deeper and check if it could be a ros 6.37.4(+?) or winbox only (3.10) problem. Try to configure/enable ip accounting via winbox > all seems to be fine (service works...
by bajodel
Thu Jan 26, 2017 7:29 am
Forum: General
Topic: User with default Safe Mode
Replies: 16
Views: 11220

Re: User with default Safe Mode

.. cut.. I personally can settle for the same way safe mode is working now, just with an option in Winbox at the startup saying "launch in safe mode" that would simply click the safe mode button for me in the beginning. If somebody else is editing in safe mode - I will get an error messag...
by bajodel
Tue Jan 24, 2017 7:54 pm
Forum: General
Topic: AUTOSUPOUT.rif
Replies: 1
Views: 1735

Re: AUTOSUPOUT.rif

by bajodel
Tue Jan 24, 2017 7:41 pm
Forum: Announcements
Topic: Winbox 3.10 released!
Replies: 69
Views: 58083

Re: Winbox 3.10 released!

Future request: Please preserve the state of the "Torch" collect blocks when exiting Winbox so I don't have to keep reselecting them each time? 8)
+11 :lol:
by bajodel
Tue Jan 24, 2017 7:39 pm
Forum: Announcements
Topic: The Dude, v6.39rc test builds.
Replies: 121
Views: 58071

Re: The Dude, v6.39rc test builds.

in my setup, starting from 6.38x, the email notification server PORT setting is ignored (If I put 587, it uses 25 instead). I can't test rc now, could someone please check/confirm ? thanks
Am I the only one ?

(x86 dude)
by bajodel
Fri Jan 20, 2017 9:32 am
Forum: Announcements
Topic: The Dude, v6.39rc test builds.
Replies: 121
Views: 58071

Re: The Dude, v6.39rc test builds.

in my setup, starting from 6.38x, the email notification server PORT setting is ignored (If I put 587, it uses 25 instead). I can't test rc now, could someone please check/confirm ? thanks
by bajodel
Thu Jan 19, 2017 10:05 pm
Forum: Beginner Basics
Topic: [SOLVED] 2 concurent pppoe connections on the same wan interface
Replies: 20
Views: 15524

Re: 2 concurent pppoe conections on the same wan interface

It's too hard to solve in this way, you need to test more with the help of torch and log. In your place I would try to simplify the setup (maybe starting from blank config); surely you have some oddness in the marking/routing stuff but it's hard to work reading export lines w/o the possibility to di...
by bajodel
Tue Jan 17, 2017 11:54 pm
Forum: General
Topic: PS4 and MT DNS ...
Replies: 10
Views: 3969

Re: PS4 and MT DNS ...

The question is, what queries it sends that some public resolvers can properly answer and RouterOS can't? It should be the same.
Maybe some queries are not sent to public resolver but forced elsewhere, redirected queries are instead all catched so something can definitely be different
by bajodel
Sat Jan 14, 2017 3:17 pm
Forum: Beginner Basics
Topic: [SOLVED] 2 concurent pppoe connections on the same wan interface
Replies: 20
Views: 15524

Re: 2 concurent pppoe conections on the same wan interface

( Safely backup your config and) try this: /ip route add dst-address=172.16.21.240/28 gateway=172.16.21.254 routing-mark=lan-paul ..and also notice that IMHO you have errors in your "/ip firewall filter" (I've splitted your forward/input chains but keeping YOUR original order): {01} add ch...
by bajodel
Fri Jan 13, 2017 9:49 pm
Forum: RouterBOARD hardware
Topic: What is exactly direct attach cable?... Does it contain SFP+ interface?
Replies: 13
Views: 5211

Re: What is exactly direct attach cable?... Does it contain SFP+ interface?

...
Is it okay? I tried looking for 850nm but most shops don't mention wavelength so I'm a bit confused.
It's ok for S+85DLC03D but why don't you use the DAC ?
by bajodel
Tue Jan 10, 2017 1:25 am
Forum: General
Topic: Update mechanism details
Replies: 3
Views: 1527

Re: Update mechanism details

Nice infos, good work!
by bajodel
Thu Jan 05, 2017 9:02 am
Forum: Beginner Basics
Topic: [SOLVED] 2 concurent pppoe connections on the same wan interface
Replies: 20
Views: 15524

Re: 2 concurent pppoe conections on the same wan interface

..[CUT] .. I have noticed "out:pppoe-paul" ; should not be "out:ether5 ? When i have tested from local network with both workstation and my laptop connected into same switch, and was working, i did not pay attention on this. I will try tomorrow to see it. Absolutely. So double check ...
by bajodel
Wed Jan 04, 2017 11:40 pm
Forum: Beginner Basics
Topic: [SOLVED] 2 concurent pppoe connections on the same wan interface
Replies: 20
Views: 15524

Re: 2 concurent pppoe conections on the same wan interface

Hi @bajodel. Nope; Code you listed is working fine ( as i have already mentioned above ) but i want to connect via RDP from inside lan after .. [CUT] .. Yes, my bad .. I've copy&pasted wrong rules. Let's have another approach: 1) leave proxy-arp enabled on ether5 2) put an explicit (early posit...
by bajodel
Wed Jan 04, 2017 6:13 am
Forum: Beginner Basics
Topic: [SOLVED] 2 concurent pppoe connections on the same wan interface
Replies: 20
Views: 15524

Re: 2 concurent pppoe conections on the same wan interface

/ip firewall filter add action=accept chain=forward comment="Forward Remote Desktop Paul" disabled=no dst-port=35000 in-interface=pppoe-paul log=yes protocol=tcp /ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-port=35000 in-interface=pppoe-paul protocol=tcp to-addresses=1...
by bajodel
Tue Jan 03, 2017 12:19 am
Forum: Beginner Basics
Topic: [SOLVED] 2 concurent pppoe connections on the same wan interface
Replies: 20
Views: 15524

Re: 2 concurent pppoe conections on the same wan interface

I would try to enable proxy-arp on ether5 (or local-proxy-arp if you are already on 6.38),
by bajodel
Sat Dec 24, 2016 4:43 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 121885

Re: v6.38rc [release candidate] is released

..[cut]..
*) bridge - fixed VLAN BPDU rx and tx when connected to non-RouterOS device with STP functionality;
..[cut]..
Can I have more info about that ? Thank you.
by bajodel
Thu Dec 15, 2016 8:44 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 121885

Re: v6.38rc [release candidate] is released

Version 6.38rc49 has been released.
..
*) capsman - added "group-key-update" parameter;
...
finally! ..great news!
by bajodel
Wed Dec 14, 2016 9:56 pm
Forum: Beginner Basics
Topic: Router down alert
Replies: 2
Views: 2159

Re: Router down alert

by bajodel
Wed Dec 14, 2016 8:05 pm
Forum: General
Topic: RouterOS based IPv6 Christmas Tree
Replies: 2
Views: 2274

Re: RouterOS based IPv6 Christmas Tree

figata! (italian version for "cool") :lol:
by bajodel
Wed Dec 14, 2016 9:31 am
Forum: Wireless Networking
Topic: Built in Wi-Fi vs cAP performance speed difference
Replies: 10
Views: 2845

Re: Built in Wi-Fi vs cAP performance speed difference

just a note.. I see now there is an updated/new cAP version wich is dual chained, what version do you have?
by bajodel
Tue Dec 13, 2016 8:01 pm
Forum: Wireless Networking
Topic: Built in Wi-Fi vs cAP performance speed difference
Replies: 10
Views: 2845

Re: Built in Wi-Fi vs cAP performance speed difference

So in my situation, with one 2011 and two cAPs, is there a way to run only 1 ssid through 2011 and cAPs? It just doesn't make any sense to not use 2011's dual antennas when it's faster than cAP. sure, set the same ssid/wpa2 on all 3 ap (2011 and 2 cAP). If you have clean full spectrum set 1,6,11 ch...
by bajodel
Thu Dec 01, 2016 9:15 pm
Forum: Scripting
Topic: measured WAN bandwidth + dynamic queue calculation script
Replies: 3
Views: 2764

Re: measured WAN bandwidth + dynamic queue calculation script

just a note, imho you should measure total bandwidth on your real wan interface and not the test bandwidth avg in order to take the right script decisions
by bajodel
Wed Nov 30, 2016 11:42 pm
Forum: Wireless Networking
Topic: Built in Wi-Fi vs cAP performance speed difference
Replies: 10
Views: 2845

Re: Built in Wi-Fi vs cAP performance speed difference

Remember cAP is mono chain, 2011 has dual chain wireless (two antenna/polarisation) so the latter has double the speed (in perfect conditions) and has better resiliency in noisy environment
by bajodel
Tue Nov 29, 2016 12:49 am
Forum: General
Topic: CCR to replace old L4 firewall
Replies: 1
Views: 1176

Re: CCR to replace old L4 firewall

probably ccr1009 would be enough for that, but I would go for the ccr1016 (not the 1036 because it has not the redundant power option).
by bajodel
Tue Nov 29, 2016 12:32 am
Forum: General
Topic: Why my Mikrotik Router has same MAC ADDRESS
Replies: 3
Views: 3802

Re: Why my Mikrotik Router has same MAC ADDRESS

probably because you restored the same backup file on the three device.
look at interface property and click on reset mac, or via console "/interface ethernet reset-mac-address"
by bajodel
Mon Nov 28, 2016 1:10 am
Forum: General
Topic: single Mikrotik, 300 users, 100% CPU usage (firewall, queues)
Replies: 3
Views: 2294

Re: single Mikrotik, 300 users, 100% CPU usage (firewall, queues)

new hEX is indeed powerful and affordable, probably it can do the job ..worth a try. I've suggested 3011 to be sure and to have some rooms for growth with few bucks more.
I would leave the crs doing the switch only, queue is heavy task (anyway you can try)
by bajodel
Sun Nov 27, 2016 11:43 pm
Forum: Wireless Networking
Topic: SXT SA5 ac rebooting with nv2 active
Replies: 4
Views: 1553

Re: SXT SA5 ac rebooting with nv2 active

did you update firmware also (system routerboard)?
by bajodel
Sun Nov 27, 2016 11:26 pm
Forum: General
Topic: single Mikrotik, 300 users, 100% CPU usage (firewall, queues)
Replies: 3
Views: 2294

Re: single Mikrotik, 300 users, 100% CPU usage (firewall, queues)

are you serious? you bought a 100 bucks switch pretending to route, nat and queue 300 users on a 100Mbit link?!
maybe crs is good enough for switching your user network, but now it's time to buy a quite powerful router !
if you have low budget, a 3011 would be the cheaper solution
by bajodel
Sun Nov 27, 2016 2:12 pm
Forum: General
Topic: HotSpot DoS
Replies: 10
Views: 3429

Re: HotSpot DoS

..cut.. 1. in your hotspot server settings, remove the address-pool entry (it should be none) - this way no unknown IP addresses will be mapped to pool addresses. 2. in the hotspot IP bindings list, create a rule at the bottom of the list for the entirety of your hotspot range as "regular"...
by bajodel
Sun Nov 27, 2016 1:49 am
Forum: RouterBOARD hardware
Topic: 1 Gbit/s connection, need router upgrade?
Replies: 21
Views: 10431

Re: 1 Gbit/s connection, need router upgrade?

I've a couple of 3011 on 100/100 fiber connection doing nat, firewall and queue (no fasttrack) and their cpu work in range 25-30% when link is saturated. In same conditions I think 3011 would probably max his cpus at about 300-400 Mbit (aggregate). I may be wrong but IMHO 3011 is not the right choic...
by bajodel
Fri Nov 25, 2016 12:35 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 121885

Re: v6.38rc [release candidate] is released

Version 6.38rc36 has been released. Changes since 6.38rc35: .. [CUT].. If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash. CRS125-24G-1S upgraded from 6.38rc3...
by bajodel
Wed Nov 23, 2016 5:18 pm
Forum: General
Topic: New feature Loop Protect - how it works
Replies: 6
Views: 13400

Re: New feature Loop Protect - how it works

why disabled interface go up 10 half duplex ? (asked already on the linked page)
by bajodel
Wed Nov 23, 2016 4:55 pm
Forum: Forwarding Protocols
Topic: BGP Multihoming
Replies: 10
Views: 8280

Re: BGP Multihoming

are you able to setup a working status with ispB only?
by bajodel
Wed Nov 23, 2016 3:57 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 211512

Re: Blacklist Filter update script

.. [CUT] .. 3) use the list as a raw in and out list, and whitelist the addresses you feel are wrongly blocked. Personally, I use option 3 for businesses .. [CUT] .. Testing (mode 3) now on a new hEX and works like a charm. Thanks.. (rep+) I'm wondering if I can consider "reliable" your s...
by bajodel
Sat Nov 05, 2016 1:04 am
Forum: RouterBOARD hardware
Topic: RB750Gr3 - Report and questions
Replies: 113
Views: 52486

Re: RB750Gr3 - Report and questions

My only disappointment is the 16MB flash. I'm a huge proponent of partitions. There have been times where I have had to revert back after upgrading, due to a bug. Nothing like being able to just boot the other partition! I would be willing to pay the extra $2 to have 32 or 64MB flash. ;-) Amen .. +1
by bajodel
Tue Nov 01, 2016 10:32 am
Forum: Wireless Networking
Topic: CAPsMAN wireless network issues
Replies: 6
Views: 6090

Re: CAPsMAN wireless network issues

WMM is enabled by default in CAPsMAN (from 6.31+) , before it was disabled by default (I would like a control over it too with a software setting). About group key timeout (I can be wrong) I remember some mention in a past changelog but I've not verified that functionality at that time; a rapid chec...
by bajodel
Tue Nov 01, 2016 4:58 am
Forum: General
Topic: Route without default gateway
Replies: 6
Views: 3660

Re: Route without default gateway

add chain=srcnat out-interface=LAN dst-address=192.168.1.100 action=masquerade
can you explain logic of that expression?
you'll find it useful >> http://wiki.mikrotik.com/wiki/Hairpin_NAT
by bajodel
Sun Oct 30, 2016 4:17 am
Forum: Announcements
Topic: We have a new homepage!
Replies: 29
Views: 12903

Re: We have a new homepage!

nice job, too white for me also (ubiquit/ous apple style contamination) but it's my problem only :lol:
by bajodel
Fri Oct 21, 2016 9:57 am
Forum: RouterBOARD hardware
Topic: RB3011 related topics
Replies: 5
Views: 2046

Re: RB3011 related topics

About HW encryption, it was promised for ROS v7, because currently used kernel does not have a driver.
ok, this answers only to one question. What about partitions ? I'm now extremely used to work with them for failsafe/backup and I'm scared to upgrade my 3011 devices.
by bajodel
Wed Oct 19, 2016 9:39 am
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 121885

Re: v6.38rc [release candidate] is released

On RB951G with 6.38rc15 (using winbox 3.7) if you set wlan1 band to 2 Ghz-G/N the HT MCS tab disappears. It came back if you set band to bgn or only-n (not tested other combinations)
by bajodel
Tue Sep 20, 2016 12:51 am
Forum: General
Topic: GPON ONU module no details
Replies: 9
Views: 4030

Re: GPON ONU module no details

My GPON ONU works well, but also show no details in CRS125. Do you have someone working GPON SFP with details about SFP module? Thanks
I'm sorry I've no answer, but I have a question :-D ..what do you have/use on the other side (olt)?
by bajodel
Mon Sep 19, 2016 10:23 pm
Forum: General
Topic: When is Mikrotik going to fix NV2 PTMP Speed Issues
Replies: 29
Views: 6516

Re: When is Mikrotik going to fix NV2 PTMP Speed Issues

I guees, crowded vertical reasons :lol:
by bajodel
Sun Sep 18, 2016 8:45 am
Forum: General
Topic: When is Mikrotik going to fix NV2 PTMP Speed Issues
Replies: 29
Views: 6516

Re: When is Mikrotik going to fix NV2 PTMP Speed Issues

Ha! Wow! I never looked there! me too, so rep+ to Tom Anyway, nv2 key size never make packets bigger, only "more encrypted" (so more cpu? probably not) Hardware retry default to 7 if I remember well, I usually set it lower for good links (keeping latency down) and higher for bad one (help...
by bajodel
Fri Sep 02, 2016 8:28 pm
Forum: General
Topic: Strange peaks in traffic
Replies: 8
Views: 2401

Re: Strange peaks in traffic

Have you upgraded many times (RC version included) that 1016 ? ..a couple of times I've experienced some problems when I did lot of uprade (testing boards) . Netinstall solved.
Let us know
by bajodel
Fri Sep 02, 2016 2:41 am
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 320
Views: 101995

Re: v6.37rc [release candidate] is released, only one wireless package!

Seems like ipip tunnels not working if fastpath is enabled (if I disable fastpath locally on ipip interface or globally tunnels works)
by bajodel
Thu Sep 01, 2016 10:57 pm
Forum: General
Topic: Strange peaks in traffic
Replies: 8
Views: 2401

Re: Strange peaks in traffic

In your place i would try to:
- check all bridges if they have admin-mac correctly set
- temporarily disable fastpath/track (torch docet)
- check interfaces status up/down counters
- try to disable interface flow control
- ...

Could you show us the /export ? (opportunely obfuscated)
by bajodel
Tue Aug 23, 2016 8:14 pm
Forum: Forwarding Protocols
Topic: MIkrotik BGP Monitoring
Replies: 64
Views: 37885

Re: MIkrotik BGP Monitoring

releasenote for 6.37rc10 says: snmp - added script table which executes script and returns it's output on get request;
Unfortunately I still have not been able to locate that script table... where is it?
Me too, where is it?
by bajodel
Mon Aug 15, 2016 11:44 pm
Forum: Wireless Networking
Topic: NV2 slow thruput TCP problem?
Replies: 2
Views: 1847

Re: NV2 slow thruput TCP problem?

Try also to set 911G-5HPnD CPE ethernet interface queue to ethernet default (not only hardware queue)
by bajodel
Sat Aug 13, 2016 2:22 pm
Forum: General
Topic: IPv6 and NAT - how I changed my mind
Replies: 59
Views: 30849

Re: IPv6 and NAT - how I changed my mind

I've (need to) read your post 6 times and dozens of rfc, now I've understood (probably only 80-90%, better than nothing).. and:

+1 I strongly agree :D
by bajodel
Thu Aug 04, 2016 9:56 am
Forum: General
Topic: CCR reboots automatically
Replies: 27
Views: 6482

Re: CCR reboots automatically

When CPU load increases to 90-100%, FAN speed is about 25000RPM. In profile it shows queueing consumes 70-80% CPU. This setup was working fine for more than a year and of late we are seeing this issue.
what has changed during the year? more users? different queue? upgraded ros ?
by bajodel
Thu Aug 04, 2016 6:37 am
Forum: General
Topic: CCR reboots automatically
Replies: 27
Views: 6482

Re: CCR reboots automatically

I remember some users complaining when pppoe server reaches some limit threshold (don't recall now exactly), probably I'm wrong but maybe worth to search in old topics also..
by bajodel
Thu Aug 04, 2016 6:25 am
Forum: Beginner Basics
Topic: To Bridge or Not To Bridge
Replies: 13
Views: 4887

Re: To Bridge or Not To Bridge

If you don't need to use all 10 ports, you can also connect ether5 and ether6 with a short patch. For example, if you set ether1 master port for ether2,3,4,5 and ether6 master port for ether7,8,9,10 you will have a sort of full switched logic (no cpu involved) as you can normally achieve with crs li...
by bajodel
Thu Aug 04, 2016 6:05 am
Forum: Beginner Basics
Topic: How to assign public IP to Client?
Replies: 6
Views: 3418

Re: How to assign public IP to Client?

(sorry for incorrect grammar, I'm not native speaking) Just for curiosity ZeroByte ..which are the drawbacks if we put static and pppoe customers on the same lanX? I mean, in such scenario with few public addresses. My question arises because I always try to avoid proxy-arp whenever possible. Probab...
by bajodel
Wed Aug 03, 2016 9:41 pm
Forum: Beginner Basics
Topic: Help me before i die
Replies: 5
Views: 1887

Re: Help me before i die

http://forum.mikrotik.com/viewtopic.php?t=104464

ARM systems do not include usermanager ..jet
by bajodel
Fri Jul 29, 2016 10:36 am
Forum: General
Topic: Feature request: CLI hints in WinBox
Replies: 7
Views: 2637

Re: Feature request: CLI hints in WinBox

absolutely nice ++
by bajodel
Wed Jul 20, 2016 7:19 am
Forum: Wireless Networking
Topic: Wireless-rep and non-Routerboards?
Replies: 10
Views: 2868

Re: Wireless-rep and non-Routerboards?

station-bridge is obviously not a option with your Apple AP, but you probably can try with station-wds ..

http://wiki.mikrotik.com/wiki/Manual:In ... s#Repeater
by bajodel
Fri Jul 15, 2016 12:08 am
Forum: General
Topic: Long lived TCP sessions dying in 6.35?
Replies: 12
Views: 2371

Re: Long lived TCP sessions dying in 6.35?

I suspect similar strange behavior on some test board (working with actual bugfix 6.34.6 and current 6.35.x) .. on production I'm always very conservative and still using old bugfix 6.32.x and 6.30.4  everywhere and there I never notified problems.
Do you have any updates on this?
by bajodel
Wed Jul 13, 2016 11:20 pm
Forum: Forwarding Protocols
Topic: QSPF question for experts
Replies: 10
Views: 4722

Re: QSPF question for experts

I also dug up my previous report of this bug, and Mikrotik stated that this behavior will be fixed in ROSv7.

This seems like too large of a bug to leave un-fixed in ROSv6.
I Absolutely agree with you! Thanx for your lab works and detailed report.
by bajodel
Thu Jun 30, 2016 2:31 am
Forum: General
Topic: QoS
Replies: 10
Views: 2634

Re: QoS

..cut..
 (I'm not quite sure what the behavior is for a tree that is parented to global - perhaps someone else can chime in on that point)...cut..
I'm interested too

P.S. and I would like to know why I cannot give you rep anymore..  :?
by bajodel
Wed Jun 22, 2016 1:21 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106293

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

bajodel - This is different fix for other issue.
I got it, so I must wait.. ;-)
Please.. answer..  when do you plan to make partitions work on RB3011/ARM ?
by bajodel
Wed Jun 22, 2016 11:30 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106293

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Version 6.36rc30 has been released. *) rb3011 - fixed usb driver load (introduced in 6.36r22); If you experience version related issues.. [cut].. RB3011 on 6.36rc30 (rebooted 2 times after) doesn't see usb disk (USB kingston datatraveler 8GB); item present in system resources usb list but not in sy...
by bajodel
Sun Jun 12, 2016 12:16 pm
Forum: Announcements
Topic: v6.34.6 [bugfix] is released!
Replies: 59
Views: 30640

Re: v6.34.6 [bugfix] is released!

Upgraded some ipsec endpoints (mostly rb1100) ..all working well.
The new bugfix version seems to have the same quality/stability level of previous.. maybe better.
Well done!
by bajodel
Thu Jun 09, 2016 12:41 am
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106293

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Version 6.36rc27 has been released. .. cut .. If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash. Rb3011 still doesn't see usb disk and partition's tool doesn...
by bajodel
Sun Jun 05, 2016 9:07 pm
Forum: Announcements
Topic: v6.34.5 [bugfix] is released!
Replies: 23
Views: 14737

Re: v6.34.5 [bugfix] is released!

First reboot after upgrade "solved" the timestamp issue..
Confirmed on a rb1100, thanks for hint
by bajodel
Wed May 25, 2016 3:28 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106293

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

..[cut].. bajodel - please generate supout file on device and send it to support@mikrotik.com OK ..to give more help I've netinstalled one of the RB3011 with 6.36rc16. Problem persist, so supout sent to support@mikrotik.com with screenshot and details. >> [Ticket#2016052566000541] Thank you..
by bajodel
Wed May 25, 2016 1:52 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 106293

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Version 6.36rc16 has been released. ..[CUT].. If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash. On two RB3011 upgraded to 6.36rc16 I've lost USB/Disk (prese...
by bajodel
Fri May 20, 2016 1:14 am
Forum: General
Topic: 8 MB line
Replies: 6
Views: 2033

Re: 8 MB line

Pcq-upload does not work well when apple devices starts to backup!!! I mean when a user starts to fully upload. It works better if you also set a rate limit in pcq queue (eventually bursted) at a reasonable fraction of full upload speed (also true for download ..but, in my experience, avoidable in ...
by bajodel
Mon Apr 04, 2016 2:03 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177101

Re: v6.35rc [release candidate] is released, new wireless package!

*) rb3011 - make ether6-ether10 work if SFP module is present on bootup; Does this resolve the port flapping issue that appeared on some rc after rc29? If yes, did anyone manage to upgrade to the latest rc without 'bricking' their board? There are a few reports not being able to boot afterwards. My...
by bajodel
Sat Mar 26, 2016 2:27 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177101

Re: v6.35rc [release candidate] is released, new wireless package!

Version 6.35rc42 ..port flapping on 3011 persist (ports 6-10), device unusable Also confirmed here. Downgraded back to 6.35rc29 and the problem was resolved. I'm quite new to 3011 so I went back to 6.34.3, flapping resolved but I've encountered some strange 'loop' alert on bridges witch have VLANs ...
by bajodel
Fri Mar 25, 2016 1:11 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177101

Re: v6.35rc [release candidate] is released, new wireless package!

Version 6.35rc41 has been released. ..[CUT].. If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash. It does not resolve the behavior to flapping at the RB3011 i...
by bajodel
Thu Mar 17, 2016 9:50 am
Forum: General
Topic: Block DDoS on Prerouting chain on firewall
Replies: 24
Views: 6589

Re: Block DDoS on Prerouting chain on firewall

any news on this?
by bajodel
Tue Feb 23, 2016 9:26 pm
Forum: Wireless Networking
Topic: mANTBox 19s vs NetMetal 5 + 5G-19-120 AirMax
Replies: 13
Views: 10234

Re: mANTBox 19s vs NetMetal 5 + 5G-19-120 AirMax

about same results with 1/2 the cost ? :D
by bajodel
Thu Feb 18, 2016 9:54 pm
Forum: Beginner Basics
Topic: Update License Key Problem
Replies: 2
Views: 4641

Re: Update License Key Problem

From wiki.. http://wiki.mikrotik.com/wiki/Manual:Upgrading_RouterOS License issues When upgrading from older versions, there could be issues with your license key. Possible scenarios: When upgrading from RouterOS v2.8 or older, the system might complain about expired upgrade time. To override this, ...
by bajodel
Wed Feb 10, 2016 12:07 am
Forum: General
Topic: Can CoA remove queue rule?
Replies: 2
Views: 1603

Re: Can CoA remove queue rule?

looking for answer as well ..
by bajodel
Fri Feb 05, 2016 9:54 pm
Forum: Wireless Networking
Topic: Does ROS support RFC 3580 ?
Replies: 6
Views: 1822

Re: Does ROS support RFC 3580 ?

I'm sorry thats not what I ment. I already have a wpa2-radius setup with ROS and the ubiquiti ap's a long time. With rfc 3580 you can make dynamic vlan's. So you can asign specific users to a specific vlan based on their login username or you can allow access to a specific ssid for a specific user....
by bajodel
Sat Jan 30, 2016 12:32 pm
Forum: Wireless Networking
Topic: CAPsMAN and dynamic interface names
Replies: 3
Views: 3615

Re: CAPsMAN and dynamic interface names

create-enabled - create enabled static interfaces. I.e., the interfaces will be bound to the radio and the radio will be operational; create-dynamic-enabled - create enabled dynamic interfaces. I.e., the interfaces will be bound to the radio, and the radio will be operational; and the difference be...
by bajodel
Wed Jan 27, 2016 6:31 am
Forum: General
Topic: limit user connection
Replies: 18
Views: 3366

Re: limit user connection

Thanks. Btw can u help me with your config i'm still new to this. Set two dhcp pools that means 2 dhcp in 2 different bridge right? Use firewall rules to enable the first pool and disable the scond pool internet access can u show me how. Thanks No, two pools (ip ranges) in the same dhcp (as jarda w...
  • 1
  • 2