Community discussions

Search found 33 matches

by parscon
Wed Oct 31, 2018 9:03 am
Forum: General
Topic: PCC Load Balance/Dual WAN Upload problem
Replies: 2
Views: 750

PCC Load Balance/Dual WAN Upload problem

Hi , I am using below config for PCC Load Balance/Dual WAN and it is working great just when i test by speedtest.net in some provider just one link upload works . i do not have this problem in download at all .just upload has a problem , can you help me , where is the problem ? WAN1 :10.10.10.1 WAN2...
by parscon
Tue Apr 24, 2018 1:10 pm
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 165119

Re: Advisory: Vulnerability exploiting the Winbox port

My Router after upgrade , Restart and Restart and Restart and ... what i must do ? i have CCR1036-12G-4S
by parscon
Wed Jan 13, 2016 11:11 am
Forum: Scripting
Topic: Delete all connection in Firewall-Connections
Replies: 5
Views: 5239

Delete all connection in Firewall-Connections

Hello to all
I need a Script that can delete all connections in IP--->Firewall--->Connections
I use this below script but it does not remove all .
/ ip firewall connection {:foreach r in=[find] do={remove $r}}
Please help me .
Best Regards
by parscon
Fri Jul 17, 2015 11:20 pm
Forum: Beginner Basics
Topic: IPIP Tunnel Problem in 4 wan and incoming connections
Replies: 3
Views: 634

Re: IPIP Tunnel Problem in 4 wan and incoming connections

Dear bajodel
Thanks for your reply . could you please guide me about routing mark for IPIP Tunnels ?
Please help me.
Thank you
by parscon
Fri Jul 17, 2015 1:14 am
Forum: Beginner Basics
Topic: IPIP Tunnel Problem in 4 wan and incoming connections
Replies: 3
Views: 634

IPIP Tunnel Problem in 4 wan and incoming connections

Hello to all I have a some server inside my network, listening on port 8800 and 443 and ... , and i would like to be able to accept incoming connections from all wan than mean wan1 and wan2 and wan 3 and wan 4 . and i use the below codes . Now everything work fine except IPIP tunnels , i have also 4...
by parscon
Mon Jul 06, 2015 7:38 pm
Forum: General
Topic: NAT to remote office network.
Replies: 4
Views: 464

Re: NAT to remote office network.

I need the same . exactly , what you mean pure routing? could you please explain more ?
by parscon
Mon Jul 06, 2015 1:48 pm
Forum: General
Topic: how to block html5 video and audio player like flowplayer
Replies: 1
Views: 590

how to block html5 video and audio player like flowplayer

Hello I need to block video and audio content for html5 player like flowplayer , i tested with L7 filter but does not work . i cannot use web proxy . so is there any way to block these content ?

Thank you
by parscon
Sun May 17, 2015 10:46 pm
Forum: Scripting
Topic: Change routes every 15 second
Replies: 6
Views: 803

Re: Change routes every 15 second

I need This for UDP , for example EOIP is open but UDP does not work on EOIP i need tunnel between 2 router can pass UDP . if help me on this script it will help me so much .
by parscon
Sun May 17, 2015 10:36 pm
Forum: Scripting
Topic: Change routes every 15 second
Replies: 6
Views: 803

Re: Change routes every 15 second

My Friend , it is not for Spam Source , you did not live in countries like China , Iran and ... any way in IPIP tunnel they firewall (government) will drop the connection if it is establish more than 20 second . all VPN all Tunnel is already Blocked !!!! So first think after that write your idea, De...
by parscon
Sun May 17, 2015 7:44 pm
Forum: Scripting
Topic: Change routes every 15 second
Replies: 6
Views: 803

Change routes every 15 second

I need a script can ability to disable active routes for 15 second (that mean the routes that are not disable) and their comments start with "IP". This very important only apply for routes that their comment start with "IP" and routes my be active. Route IP1 Route IP2 Route IP3 Route IP4 Route IP5 R...
by parscon
Sun Feb 01, 2015 7:49 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

I sent my information .
Thank you very much
by parscon
Sun Feb 01, 2015 7:17 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

Really does not work i can give you access to see my router

how can i send you my router information

My router OS is 6.25 and my router is 750GL
by parscon
Sun Feb 01, 2015 7:07 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

I used this code :local rotateFilter "^Default\-Route\-\-\>L"; /ip route { :if ([:len [find where comment~"$rotateFilter" && dst-address=0.0.0.0/0 && disabled=no]] > 1) do={ disable [find where comment~"$rotateFilter" && dst-address=0.0.0.0/0 && active=yes]; } else={ enable [find where comment~"$rot...
by parscon
Sun Feb 01, 2015 6:53 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

Dear boen_robot
Now i checked it my router it will not change the routes that mean disable and enable .
Please help me .
by parscon
Sun Feb 01, 2015 5:12 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

Dear boen_robot
I can write you saved me and thanks for your attention and time .
Best Regards

Note : i know this not not good but i had another issue can you check it please : http://forum.mikrotik.com/viewtopic.php?f=2&t=92872

Thank you very much again .
by parscon
Sun Feb 01, 2015 4:36 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

Thank you very much and just i have another question can you add range that mean i have many routes and i need check from Default-Route-->L1 till Default-Route-->L44 is it possible ?
Thank you very much and really i am happy that can find a solution .
by parscon
Sun Feb 01, 2015 3:10 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

yes , that's ok , but the problem this if the route is active and will not change every 15 second it will be block and blocked for 5 or 6 hour and all my routes will be block in 10 minute , this the reason i need changed every active routes for 15 second . this situation is very strange and i know i...
by parscon
Sun Feb 01, 2015 2:36 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

I created some netwatch and they will check the tunnel and if the tunnel is down will disable the route. and i need script that every 15 second change the routes that mean if the route is enable, disable it for 15 second and another route will be active and again after 15 second will be back . and m...
by parscon
Sun Feb 01, 2015 1:53 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

Re: How can i make shorter the routing script ?

Thanks for your fast reply , what i need I my country every 20 second government will block the tunnel so i need to change the tunnel every 15 second , i have 44 tunnel and also 44 routes , this script that i write will add in Scheduler and interval 30 second that mean will check all routes if route...
by parscon
Sun Feb 01, 2015 1:15 pm
Forum: Scripting
Topic: How can i make shorter the routing script ?
Replies: 17
Views: 1480

How can i make shorter the routing script ?

:local dfL1 "Default-Route-->L1"; :local dfL2 "Default-Route-->L2"; :local dfL3 "Default-Route-->L3"; :local dfL4 "Default-Route-->L4"; :local dfL5 "Default-Route-->L5"; :local dfL6 "Default-Route-->L6"; :local dfL7 "Default-Route-->L7"; :local dfL8 "Default-Route-->L8"; :local dfL9 "Default-Route-...
by parscon
Thu Jan 08, 2015 8:46 pm
Forum: General
Topic: DSTNAT Cannot access from out side router1 to local router2
Replies: 0
Views: 408

DSTNAT Cannot access from out side router1 to local router2

I have 2 Mikrotiks device that connected by IPIP tunnel and i can ping all my local Ip from both side. (IPIP tunnel is connected) From : 192.168.1.xxx can ping all range 192.168.2.xxx and also from 192.168.2.xxx can ping 192.168.1.xxx Now the problem is i want to connect by DSTNAT router 1 from out ...
by parscon
Wed Oct 22, 2014 11:44 am
Forum: Scripting
Topic: Shorter Script for check pings and disable or enable routes
Replies: 12
Views: 1756

Re: Shorter Script for check pings and disable or enable rou

Dear BartoszP Hope so you are fine I wrote his code and the problem is no address was specified could you please write me whats the problem and how can i fix it . Really Thank you very much :local RdfL0 192.168.1.12; :local RdfL1 10.0.1.2; :local RdfL2 10.0.1.4; :local dfL1 "Default-Route-->L1"; :lo...
by parscon
Tue Oct 21, 2014 1:32 pm
Forum: Scripting
Topic: Shorter Script for check pings and disable or enable routes
Replies: 12
Views: 1756

Re: Shorter Script for check pings and disable or enable rou

Really thank you very much . Really saved me .
by parscon
Tue Oct 21, 2014 11:36 am
Forum: Scripting
Topic: Shorter Script for check pings and disable or enable routes
Replies: 12
Views: 1756

Re: Shorter Script for check pings and disable or enable rou

Thank you very much and it is work fine and now i have another request , how can i short this script : Government in my country drop routes each 15 second so i need change my routes every 15 seconds and this script work fine but the problem is i have 30 route and in script section i can use 10 route...
by parscon
Mon Oct 20, 2014 3:42 pm
Forum: Scripting
Topic: Shorter Script for check pings and disable or enable routes
Replies: 12
Views: 1756

Re: Shorter Script for check pings and disable or enable rou

I made script like this but does not work . could you please check why ? Thanks for your help :for i from=40 to=84 step-2 do={ if( [/ping 10.0.1.38 count=1] = 1 && [/ping 192.168.9.12 count=1] = 1 && [/ping 10.0.1.$i count=1] = 1 ) do={ /ip route set [/ip route find comment="Default-Route-->L3"] dis...
by parscon
Mon Oct 20, 2014 3:21 pm
Forum: Scripting
Topic: Shorter Script for check pings and disable or enable routes
Replies: 12
Views: 1756

Re: Shorter Script for check pings and disable or enable rou

Thank you very much i will check and reply back.
by parscon
Mon Oct 20, 2014 2:40 pm
Forum: Scripting
Topic: Shorter Script for check pings and disable or enable routes
Replies: 12
Views: 1756

Re: Shorter Script for check pings and disable or enable rou

Thanks for your reply but it is not the things that i need .
by parscon
Mon Oct 20, 2014 1:56 pm
Forum: Scripting
Topic: Shorter Script for check pings and disable or enable routes
Replies: 12
Views: 1756

Shorter Script for check pings and disable or enable routes

How can i use shorter script than this ? Thank you very much :if ([/ping 10.0.1.38 count=1] = 1 && [/ping 192.168.9.12 count=1] = 1 && [/ping 10.0.1.40 count=1] = 1 || [/ping 10.0.1.38 count=1] = 1 && [/ping 192.168.9.12 count=1] = 1 && [/ping 10.0.1.42 count=1] = 1 || [/ping 10.0.1.38 count=1] = 1 ...
by parscon
Wed Oct 08, 2014 7:16 pm
Forum: General
Topic: IPIP between 3 Site
Replies: 4
Views: 622

Re: IPIP between 3 Site

i forget to add nat for Tunnel and now work fine ,
Thanks for your help and also the time that you spent for me .
by parscon
Wed Oct 08, 2014 4:36 pm
Forum: General
Topic: IPIP between 3 Site
Replies: 4
Views: 622

Re: IPIP between 3 Site

Thanks for your reply could you please explain more about *forward rules allowing traffic from A go to C* in B Site ?
by parscon
Wed Oct 08, 2014 2:23 pm
Forum: General
Topic: IPIP between 3 Site
Replies: 4
Views: 622

IPIP between 3 Site

I have 3 sites A, B and C each with a Mikrotik Router I have working IPIP between A => B and C => B My problem is i cannot send traffic A to C and for a reason i cannot use tunnel between A to C sites. I need Site A and C connect together using site B The only Tunnel that i can use is IPIP and GRE a...
by parscon
Fri Aug 15, 2014 11:29 am
Forum: Scripting
Topic: Change the routes by counting the packet
Replies: 0
Views: 389

Change the routes by counting the packet

I have 3 route and i need change my routes every 20 Packet and also i need to have loop .i arrange it with time but does not work fine ı need to count the packet and change the route.
Thank you very much.
by parscon
Mon Dec 02, 2013 4:23 pm
Forum: Beginner Basics
Topic: Name Server cannot ping on PPTP VPN
Replies: 0
Views: 417

Name Server cannot ping on PPTP VPN

Hello , I created an VPN and my client can connected to my network and also can ping all my local Network IP but can not ping the name of computers . That mean my server ip is 192.168.5.1 and the name is SERVER i can ping 192.168.5.1 but cannot ping SERVER . Please help me on this subject . My Devic...