Community discussions

Search found 70 matches

by tetecko
Sun Jun 02, 2019 10:12 am
Forum: Wireless Networking
Topic: 60GHz multipoint, share your experience
Replies: 36
Views: 12330

Re: 60GHz multipoint, share your experience

will be support for more than 8 CPE in future? Is that possible?
by tetecko
Sat May 25, 2019 9:34 am
Forum: Wireless Networking
Topic: W60G max 8 stations?
Replies: 1
Views: 301

W60G max 8 stations?

Hello,
do somebody know more info about max 8 CPE on 60G AP? It is a software or hardware limit? Is there any way to connect more CPE on one AP?
by tetecko
Thu Feb 14, 2019 12:18 pm
Forum: RouterBOARD hardware
Topic: EU and approvment of LHG 60? [SOLVED]
Replies: 8
Views: 1738

Re: EU and approvment of LHG 60? [SOLVED]

Will Mikrotik work on EU Certification again? Or is this device lost for ever?
by tetecko
Fri Dec 21, 2018 8:14 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84187

Re: v6.44beta [testing] is released!

Yes it is 5470-5725Mhz , but it is commonly referred to as I wrote. (fully channels)
If Mikrotik wants to restrict use of superchannels, they have to follow ETSI/CZ rules at least. They don't. They push us to not using "czech_republic" settings, if we wants to be comply with our laws rules.
by tetecko
Thu Dec 20, 2018 11:59 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84187

Re: v6.44beta [testing] is released!

I know this document. What exactly is wrong?
outdoor is exactly 5470MHz-5725MHz not 5500MHz-5700MHz mentioned by you in older posts .. indoor exactly 5150MHz-5350MHz not 5180MHz-5320MHz mentioned by you.
by tetecko
Thu Dec 20, 2018 9:40 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84187

Re: v6.44beta [testing] is released!

Honzam This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:( We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union. Does not respect outdoor / ...
by tetecko
Wed Dec 19, 2018 11:23 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84187

Re: v6.44beta [testing] is released!

Which ETSI you are comply with? Because as I know there is a band between 5470MHz to 5725Mhz, this leting me select this variety of frequencies, but if YOU apply on your restrictions, I cannot use 5480MHz, why?
by tetecko
Wed Dec 19, 2018 11:00 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 84187

Re: v6.44beta [testing] is released!

Why this is forced? According to EU law ... it is not a obligatory for equipment provider, it is obligatory for company who runs it. So please let us chose, what we want to set up on your hardware/software and do not put this restrictions. Can you please explain why you put this restrictions on?
by tetecko
Sun Oct 21, 2018 8:33 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 22704

Re: v6.43.4 [stable] is released!

After upgrade, my Metal G-52SHPacn starts rebooting
Screenshot 2018-10-21 at 19.28.14.png
by tetecko
Tue Aug 29, 2017 10:24 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32438

Re: CHR suggestions for new functionality

Make CHR to run on barebone switches. :-) http://www.edge-core.com/productsInfo.p ... 143&id=264
by tetecko
Tue Jul 25, 2017 1:21 pm
Forum: General
Topic: IPv6 mangle - set priority
Replies: 9
Views: 1607

Re: IPv6 mangle - set priority

Set priority is not only useful for NV2: - It is used to apply MPLS experimental bits for MPLS QoS - It is used to apply VLAN priority for other vendor wireless systems that use VLAN priority for QoS - Set priority from DSCP high order bits option allows you to handle all 64 DSCP values in QoS with...
by tetecko
Tue Jul 25, 2017 1:12 pm
Forum: General
Topic: My IPv6 Triage List for ROS
Replies: 48
Views: 5513

Re: My IPv6 Triage List for ROS

Not all possible. I don't want to have to set up queue trees for radio links (AirFiber and NV2) where the modulation can change and overall throughput fluctuates, and so then you are doing QoS to a moving target. It is better to use the strict priority queueing that the radio offers in each case, b...
by tetecko
Sat Jun 10, 2017 10:58 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25958

Re: Which types of ports would you like to see for a high speed router

https://en.wikipedia.org/wiki/Internet_exchange_point However, I feel as though we have gone far beyond the OP's question in explaining to you how an IX works. We can continue this conversation elsewhere, if you'd like. no flame, but we prefer private direct peering (dedicated fiber), not through p...
by tetecko
Sat Jun 10, 2017 1:43 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25958

Re: Which types of ports would you like to see for a high speed router

The IX infrastructure doesn't do BGP. It just does basic Ethernet. Many (most) do have route servers that do run BGP, but those are best ran on servers, not routers. Brocade, Juniper, Arista, Cisco, Huawei ... do you really mean "servers" ? Sorry maybe we talking about two other things, in IXP we h...
by tetecko
Sat Jun 10, 2017 12:13 am
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25958

Re: Which types of ports would you like to see for a high speed router

For the "more ports" people, check out 802.1BR If Mikrotik were to implement 802.1BR on their routers and switches, it would allow "port extension", e.g. there could be a Mikrotik Router connected to a Mikrotik Switch in "Port Extender" mode, all of the ports on the switch would then appear as if t...
by tetecko
Sat Jun 10, 2017 12:10 am
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25958

Re: Which types of ports would you like to see for a high speed router

An IX shouldn't be doing any routing. An IX should only be switching. Layer 2 only.

BGP is L2 ?
by tetecko
Thu Jun 08, 2017 9:06 am
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25958

Re: Which types of ports would you like to see for a high speed router

why even people post switch gear links? we are talking about the next gen ccr
now and in the future, there is not difference between L3 switch/router, speed is the key... hardware ASIC with TCAM is what you need.
by tetecko
Thu Jun 08, 2017 8:44 am
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25958

Re: Which types of ports would you like to see for a high speed router

I think Mikrotik are talking about a high-touch(services) router, not a low-touch router. This will be a services router like the CCR that can run PPP/NAT type services, not a "low-touch" router/switch that can just forward frames quickly. for BGP in IX we need something which have as much ports as...
by tetecko
Tue Jun 06, 2017 10:00 pm
Forum: General
Topic: ETA v8
Replies: 21
Views: 4121

Re: ETA v8

I guess you are waiting for some specific feature, not the number or the date.
multi-threaded bgp seems to be at the top of the list...
+1000
by tetecko
Tue Jun 06, 2017 9:55 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 25958

Re: Which types of ports would you like to see for a high speed router

48x SFP+
6x QSFP

as a BGP router...


edit: any ETA?
by tetecko
Wed Apr 05, 2017 9:57 pm
Forum: General
Topic: IPv6 mangle - set priority
Replies: 9
Views: 1607

Re: IPv6 mangle - set priority

I like this guys too much!

they say, that something is useless... If you don't use something, it is not meaning, that it is useless..

in old world, we used call them Lamer :-)
by tetecko
Mon Apr 03, 2017 10:43 am
Forum: General
Topic: IPv6 mangle - set priority
Replies: 9
Views: 1607

Re: IPv6 mangle - set priority

Don't be silly :-) MikroTik NV2 wireless protocol has QoS already fully integrated (IEEE 802.1D-2004) you can set priority for wireless traffic, and there is only IPv4 support, but none for IPv6 traffic, what is pity. you can educate yourself here, for example.... https://mum.mikrotik.com/presentati...
by tetecko
Fri Mar 31, 2017 9:56 pm
Forum: General
Topic: IPv6 mangle - set priority
Replies: 9
Views: 1607

IPv6 mangle - set priority

Hi,

is there any way to set priority for IPv6 packets?

ipv6/firewall/mangle - there is not action "set priority" -bug?
by tetecko
Fri Mar 03, 2017 10:00 pm
Forum: Forwarding Protocols
Topic: IPv6 DHCP Relay with PD not installing route
Replies: 6
Views: 1637

Re: IPv6 DHCP Relay with PD not installing route

Same problem here!

mikrotik install route on the server, where is DHCP-SERVER, but correct behavior is to install route there, where is DHCP-RELAY.
by tetecko
Wed Mar 16, 2016 8:40 am
Forum: Announcements
Topic: Winbox3.3 released!
Replies: 37
Views: 9521

Re: Winbox3.3 released!

*) added back 'Exit' button;
Thank you guys!

+1 :-)))
by tetecko
Fri Mar 11, 2016 9:59 pm
Forum: Announcements
Topic: Winbox3.2 released!
Replies: 59
Views: 11612

Re: Winbox3.2 released!

We can not make sure that everything can be done with single click. Why do not jut use "X" to close Winbox? in WinBox v2, pressing 'X' almost never saved current session, so it is MikroTik who taught us to press 'Exit' ;) so please return it back... You become responsible forever, for what you have...
by tetecko
Thu Mar 10, 2016 1:00 pm
Forum: Announcements
Topic: Winbox3.2 released!
Replies: 59
Views: 11612

Re: Winbox3.2 released!

docmarius - Thank you. We are aware of it and it is reported to developers. tetecko - We can not make sure that everything can be done with single click. Why do not jut use "X" to close Winbox? Some of us don't use microsoft :-) I have OSX, and CrossOver, so press X do nothing, and if I want to clo...
by tetecko
Thu Mar 10, 2016 10:43 am
Forum: Announcements
Topic: Winbox3.2 released!
Replies: 59
Views: 11612

Re: Winbox3.2 released!

Why is exit in session menu? It was only one click to close winbox window, now you must click two times, thats annoying :-(
by tetecko
Tue Jul 28, 2015 11:26 pm
Forum: General
Topic: 6rd support?
Replies: 23
Views: 9096

Re: 6rd support?

for 6rd you can inspire here .. http://forum.mikrotik.com/viewtopic.php?t=99030
by tetecko
Tue Jul 28, 2015 11:25 pm
Forum: General
Topic: Feature request for v7.x
Replies: 269
Views: 63706

Re: Feature request for v7.x

+1 for 6rd support .

My isp only supports that at this point and I don't want a tunnel service like HE.
Regards

http://forum.mikrotik.com/viewtopic.php?t=99030
by tetecko
Tue Jul 28, 2015 11:25 pm
Forum: General
Topic: 6rd over DHCPv6
Replies: 1
Views: 857

Re: 6rd over DHCPv6

by tetecko
Tue Jul 28, 2015 11:17 pm
Forum: General
Topic: 6rd working on ROS
Replies: 1
Views: 2789

6rd working on ROS

If anyone want to have 6RD, we made a script to enable it. This script working for ::/32 IPv6 segment and 100.0.0.0/8 IPv4 segment what you need to do on mikrotik (you just need to set uplink/local interface and of course your IPv6 prefix, 6RD relay): :global ipv6localinterface "PASTE YOUR LOCAL IFA...
by tetecko
Wed Dec 24, 2014 11:54 am
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+ SFP Problems
Replies: 48
Views: 38199

Re: CCR1036-8G-2S+ SFP Problems

2. regarding lack of information "Tx Power" field I suspect that dmi information fetching from module failed. Reboot or power cycle should fix this state. DMI not working on new modules .. trough version 6.20 to 6.24 .. unplug modules, reboot, upgrade fw, but nothing help... on new MKT modules, the...
by tetecko
Wed Dec 24, 2014 11:44 am
Forum: RouterBOARD hardware
Topic: CRS109-8G-1S BAD VOLTAGE MEASURE
Replies: 0
Views: 540

CRS109-8G-1S BAD VOLTAGE MEASURE

I have this board: system resource print uptime: 7m11s version: 6.24 build-time: Dec/23/2014 13:38:45 free-memory: 110.0MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 750MHz cpu-load: 1% free-hdd-space: 110.8MiB total-hdd-space: 128.0MiB write-sect-since-reboot: 76 write...
by tetecko
Tue Dec 02, 2014 12:28 pm
Forum: RouterBOARD hardware
Topic: SFP DDM problem?
Replies: 3
Views: 1148

SFP DDM problem?

Hi there,

is there any problem with SFP versions? Below screenshot, same module, different serial, different date... DDM missing/failed
2014-12-02 11.24.14 am.png
by tetecko
Fri Jun 20, 2014 10:36 pm
Forum: General
Topic: IPv6 Backbone with IPv4 Clients
Replies: 10
Views: 2625

Re: IPv6 Backbone with IPv4 Clients

I just tried with GRE6 and had the same problems. some sites work, others don't. wpcentral.com never works and wellsfargo.com seems to work 1/2 the time.. very strange. Of course if I switch back to total IPv4 routing , everything works perfect.. any ideas? Use IPv4 private segment for infrastructu...
by tetecko
Sun Jun 01, 2014 12:09 pm
Forum: General
Topic: IPv6 Hotspot
Replies: 0
Views: 589

IPv6 Hotspot

Hi guys, my question is simple, but please answer me nicely. Will Mikrotik Hotspot feature ever support IPv6, or not. As I observe in this forum, question is here more than 5 years, but still is not answered. If yes, when? Don't hesitate to say no, we just want to know, because we don't want to wait...
by tetecko
Mon Feb 03, 2014 8:57 pm
Forum: Beginner Basics
Topic: Powering TP Link TL-WA5210G using Mikrotik RB750UP
Replies: 9
Views: 5950

Re: Powering TP Link TL-WA5210G using Mikrotik RB750UP

Good luck
TP-Link mostly use this DC/DC converter http://www.chungda.com/Images/Upload/AZ ... 100319.pdf = you can use any voltage from 6.0V to 36.0V (according to amperage and power consumption)
by tetecko
Tue Jan 28, 2014 12:10 am
Forum: General
Topic: Flow Control in ROS
Replies: 10
Views: 3162

Re: Flow Control in ROS

I think it can be very helpfull as we are sorting out this problem namely once there is reduction of the speed between link capacities - especially Gbit ethernet to Radio which is lets say 200Mbit. This singificantly reduce thruput..

me too struggling with it...
by tetecko
Mon Jan 27, 2014 8:47 pm
Forum: Wireless Networking
Topic: Nstreme vs NV2 effective thruput with mixed type of ethernet
Replies: 3
Views: 2048

Re: Nstreme vs NV2 effective thruput with mixed type of ethe

My conclusion is: using NV2, if the traffic is originated from GigE port and destinated to FastE port, speed is much less than expected. If the datapath is sent from FastE to FastE - it's seems OK. If the wireless protocol is nstreme (instead of nv2) speed it much better (bottleneck is wireless at ...
by tetecko
Sun Mar 24, 2013 11:36 pm
Forum: Wireless Networking
Topic: 802.11n NV2 not more than 65Mbps/65Mbps
Replies: 8
Views: 2967

Re: 802.11n NV2 not more than 65Mbps/65Mbps

Maybe the AP "shows" the worst shenario of - let's say - 13Mbps/39Mbps from a client, and doesn't autochange to short GI config. But why does a client lock at THAT LOW speed with -60/-63dB signal?........It should lock at the MAXIMUM speed.... :? The CCQ is very bad of it and that's the reason it l...
by tetecko
Sun Mar 24, 2013 7:44 pm
Forum: Wireless Networking
Topic: 802.11n NV2 not more than 65Mbps/65Mbps
Replies: 8
Views: 2967

Re: 802.11n NV2 not more than 65Mbps/65Mbps

a. From the above screenshot with worst case -64db signal strenth, WHY do you lock at those LOW speeds? :? b. Why don't you just pick as for the card's output Tx power its default settings? c. How many clients are on this AP? d. I see that you use "preamble-mode=short" as for the client, why's that...
by tetecko
Sun Mar 24, 2013 7:02 pm
Forum: Wireless Networking
Topic: 802.11n NV2 not more than 65Mbps/65Mbps
Replies: 8
Views: 2967

Re: 802.11n NV2 not more than 65Mbps/65Mbps

This post from Uldis confirms Nv2 wireless protocol supports short guard interval. http://forum.mikrotik.com/viewtopic.php?f=7&t=62618#p320792 On both AP and client use channel width: 20/40MHz, HT Guard Interval: any, protocol: nv2 and you should get tx/tx rate of 150Mbps/150Mbps And if I don't wan...
by tetecko
Sun Mar 24, 2013 7:00 pm
Forum: Wireless Networking
Topic: 802.11n NV2 not more than 65Mbps/65Mbps
Replies: 8
Views: 2967

Re: 802.11n NV2 not more than 65Mbps/65Mbps

What is the signal that you get and the quality CCQ Tx/Rx at the speed that you are locked (65Mbps)? Nv2 SUPPORTS and works better (as for me at least) with Sort GI cofig. How can I set short GI ? I have HT Guard Interval = Any this is same on Metal 5SHPn as AP .. which I send screenshot for some c...
by tetecko
Sun Mar 24, 2013 11:39 am
Forum: Wireless Networking
Topic: 802.11n NV2 not more than 65Mbps/65Mbps
Replies: 8
Views: 2967

802.11n NV2 not more than 65Mbps/65Mbps

I have 802.11n RB433AH+DBii-F50N-PRO on AP and client is Groove or RB411+R52Nm .. NV2, 20MHz .. ROS 6.0rc11 Why is not connected more than 65Mbps/65Mbps? It looks like it use only long guard interval, why it not support short GI and then go to 72.2Mbps/72.2Mbps? I try to search forum, somewhere is w...
by tetecko
Wed Jan 23, 2013 10:01 pm
Forum: RouterBOARD hardware
Topic: Huge sector writes
Replies: 21
Views: 4838

Re: Huge sector writes

Hmm Mikrotik is like Windows, time to time you need to netinstall it .. :) no matter you have board installed on the site which is hard to reach, no matter you have 5000+ client devices, it's common and well problem, just netinstall it .. universal advice :) sorry, but I need let steam off, 15x RB20...
by tetecko
Tue Jan 22, 2013 7:39 pm
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24094

Re: v6 rc7 released

ipv6 - added setting to disable forwarding; how exactly is working this feature, how can I get my IPv6 address on box? I set up ipv6/setting/forward: no , but how I can get my IPv6 address now? I answer my self, its working, but you don't have chance see it :) there is nothing in ipv6/address nor i...
by tetecko
Mon Jan 21, 2013 11:20 pm
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24094

Re: v6 rc7 released

ipv6 - added setting to disable forwarding;

how exactly is working this feature, how can I get my IPv6 address on box? I set up ipv6/setting/forward: no , but how I can get my IPv6 address now?
by tetecko
Fri Apr 08, 2011 2:02 am
Forum: General
Topic: How to enable setting up ipv6 address over RA
Replies: 10
Views: 1924

Re: How to enable setting up ipv6 address over RA

There is support for prefix delegation in DHCPv6 ( RFC3633 ). And more info about CPE router requirements is in draft-ietf-v6ops-ipv6-cpe-router . Quite complex stuff compared to IPv4. On the other hand, with IPv4 it was just getting one address from DHCP and then NATing it, i.e. as simple as possi...
by tetecko
Sun Mar 06, 2011 5:32 am
Forum: General
Topic: station bridge on 5.0RC11 not working??
Replies: 3
Views: 1077

Re: station bridge on 5.0RC11

What is station-bridge? curiously...

http://wiki.mikrotik.com/wiki/Manual:Wi ... ion-bridge

is that enough for you? :)
by tetecko
Sat Mar 05, 2011 11:58 pm
Forum: General
Topic: station bridge on 5.0RC11 not working??
Replies: 3
Views: 1077

station bridge on 5.0RC11 not working??

Is mode station bridge on 5.0rc11 working?
I have RB433AH mode="ap bridge" on 4.16 and RB411 mode="station bridge" on 5.0rc11 and in this onfiguration RB411 don't want to connect! If I switch RB411 to station WDS its working like a charm..

maybe I'm doing something wrong...
by tetecko
Thu Jun 17, 2010 9:11 am
Forum: RouterBOARD hardware
Topic: dualcore routerboard ?
Replies: 5
Views: 1307

Re: dualcore routerboard ?

You really need a Multicore CPU or processor designed for SMP architecture.

http://en.wikipedia.org/wiki/Symmetric_multiprocessing

The Atheros CPUs don't fit that model.

Tom
MIPS are not SMP ?
by tetecko
Thu Jun 17, 2010 9:10 am
Forum: RouterBOARD hardware
Topic: dualcore routerboard ?
Replies: 5
Views: 1307

Re: dualcore routerboard ?

RouterBoard with MPC8572E at 1.5Ghz, 8 full-speed SFP's, 2 copper gigabit ports, and 2x USB ports would be brilliant, hint hint ;) Copper SFP modules are dirt cheap now days, so you would only need one model, just space the ports enough so aall 8 SFP's could be filled with 1000baseT SFP's and Mikro...
by tetecko
Wed Jun 16, 2010 9:52 pm
Forum: RouterBOARD hardware
Topic: dualcore routerboard ?
Replies: 5
Views: 1307

dualcore routerboard ?

Hi,
maybe I leave a same question as somebody before me :)
Will routerboard sometime go for multiple cpu ? For example 2x Atheros 680MHz on one RB433AH ? Or even more ?

regards,

Tomas
by tetecko
Mon Jun 14, 2010 3:06 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16773

Re: Hot new Mikrotik Radio Card - R52Hn

I've noticed one fundamental thing right now: if you don't need 'N' R5H is better solution than R5Hn. We have right now many working links at R5H on both side. Antennas have VSWR below 1:1,14 & RX/TX are not less 58,5 Mbps, distances: 0,8 - 4 km. How you can achieve tx/rx not less than 58,5 Mbps ??...
by tetecko
Tue Jun 08, 2010 8:21 pm
Forum: RouterBOARD hardware
Topic: R52Hn squeak
Replies: 4
Views: 1123

Re: R52Hn squeak

It's power source based, just try to change your power adapter for another one.
by tetecko
Tue Jun 08, 2010 7:58 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16773

Re: Hot new Mikrotik Radio Card - R52Hn

You can compare, same site just change R5H to R52Hn on AP side. FYI noise floor before -97dBm and noise floor after -110dBm. As you can see signals drop sometime around 5-7dBm. AP ROS4.9, most of CPE ROS4.5 before - R5H (5GHz-a mode) R5H.jpg after same time for signal settling - R5Hn (5GHz-a/n mode)...
by tetecko
Tue Jun 08, 2010 4:07 pm
Forum: General
Topic: ROS4.9 and Hotspot Bridge multiple RB433 Problem
Replies: 8
Views: 2648

Re: ROS4.9 and Hotspot Bridge multiple RB433 Problem

I have been having similar issues for a couple months now. We use Hotspot with Walled Garden for website Whitelisting at our 300+ locations. Hotspot running on a router with wireless bridged to ethernet ports causes random issues constantly. Mikrotik recommend using RSTP (among a lot of failed reco...
by tetecko
Tue Jun 08, 2010 12:22 pm
Forum: General
Topic: 802.11n station pseudobridge hotspot problem
Replies: 11
Views: 2301

Re: 802.11n station pseudobridge hotspot problem

Sergejs, I try to use station-pseudobridge-clone and same problem apears. If I have 5GHZ-a everything works well, if I have 5GHz-n IT IS NOT WORKING I have one more experience: everything working with no-HT (max. 54Mbps) synchronisation, but if cards have for example 65Mbps-HT it stop working. pleas...
by tetecko
Tue Jun 08, 2010 11:19 am
Forum: General
Topic: 802.11n station pseudobridge hotspot problem
Replies: 11
Views: 2301

Re: 802.11n station pseudobridge hotspot problem

There should not be any differences for pseudobridge station operation for different bands! Yes I guess there should not be differences, but IT IS :) as I describe before, AP ROS4.9, CPE ROS 4.5 .. If have on both sides 5GHz-a everything work well :) if I have 5GHz-N it is not working .. I can comm...
by tetecko
Tue Jun 08, 2010 11:10 am
Forum: General
Topic: 802.11n station pseudobridge hotspot problem
Replies: 11
Views: 2301

Re: 802.11n station pseudobridge hotspot problem

pseudobridge "learns", which IP address belongs to the specific MAC-address and makes translations particularly. When AP receives packets, it sees that packets were from station (check ARP table at the AP). When station receives packets, it changes destination by IP->MAC table, it looks for specifi...
by tetecko
Tue Jun 08, 2010 10:37 am
Forum: General
Topic: 802.11n station pseudobridge hotspot problem
Replies: 11
Views: 2301

Re: 802.11n station pseudobridge hotspot problem

Station-pseudobridge changes MAC-addresses dynamically. Use station-pseudobridge-clone and set MAC-address, if you want to be it permanent. Sergejs, I use in my network around 2000 CPE and never seen that station-pseudobridge change MAC dynamically. Sorry for my coment, but I dont want to argue, I'...
by tetecko
Mon Jun 07, 2010 5:35 pm
Forum: General
Topic: 802.11n station pseudobridge hotspot problem
Replies: 11
Views: 2301

Re: 802.11n station pseudobridge hotspot problem

BEFORE N ..... AP is in mode 5GHz-a/n and CPE 5GHz-a only .. as you see .. both CPE (RB411 X.X.147.245) and PC (X.X.147.243) have same MAC address .. before.jpg AFTER N ... AP is in mode 5GHz-a/n and CPE 5GHz-n only ... as you see CPE (RB411 X.X.147.245) have same MAC adress, but MAC address of PC i...
by tetecko
Mon Jun 07, 2010 4:26 pm
Forum: General
Topic: 802.11n station pseudobridge hotspot problem
Replies: 11
Views: 2301

Re: 802.11n station pseudobridge hotspot problem

Tomas, there should not be difference for mode=pseudobridge operation for 5GHz a or 5GHz a/n operation. Station pseudobridge selects MAC-address automatically, which is used for the client. If only-a works, n should work too (check whether wireless link is established properly). Hi, it's no problem...
by tetecko
Fri Jun 04, 2010 3:44 pm
Forum: General
Topic: 802.11n station pseudobridge hotspot problem
Replies: 11
Views: 2301

802.11n station pseudobridge hotspot problem

Hi, maybe I'm doing something wrong. When I use on my AP 5GHz-a/n (R52Hn) and on my client 5GHz-a/n (R52N) and I have client bridged and associated as station pseudobridge, and I have to running Hotspot on AP there is problem with MAC address. I have to seen on my Hotspot hosts, not regular MAC addr...
by tetecko
Thu Feb 25, 2010 11:58 pm
Forum: RouterBOARD hardware
Topic: Bruteforce login prevention
Replies: 11
Views: 34012

Re: Bruteforce login prevention

So Can I just copy and paste this? Are there additional notes. I am remote and I do not want to deny myself. I don't see any lines that suggest I won't be denied as well. Thanks, JR just put this line on ip/firewall/filter chain=input action=drop connection-state=new src-address-list=!TRUSTED in-in...
by tetecko
Thu Feb 25, 2010 11:48 pm
Forum: General
Topic: Winbox and IPv6
Replies: 13
Views: 5086

Re: Winbox and IPv6

I'm waiting for this too. We should be able to remove the IPv4 stack and still have a fully working router.

The more urgent is Winbox support and PPPoE IPv6 support.
I vote for it,tooo....
by tetecko
Sat Jul 26, 2008 3:17 pm
Forum: Wireless Networking
Topic: How many clients can connect to a MikroTik??
Replies: 15
Views: 3558

Re: How many clients can connect to a MikroTik??

We have over 130 clients logged on our RB433AH :) and there is no problem at all ... :lol:
by tetecko
Sat Jul 26, 2008 2:31 pm
Forum: Wireless Networking
Topic: Next gen wireless card poll
Replies: 57
Views: 25589

Re: Next gen wireless card poll

MMCX is best :)
by tetecko
Tue Aug 14, 2007 1:23 am
Forum: General
Topic: ROS v3 RC2 bugs
Replies: 12
Views: 2654

Re: ROS v3 RC2 bugs

Hi, have problem with IPV6 in 3.0rc2 > ipv6 firewall mangle print error - contact MikroTik support and send a supout file (2) and what is more important .. I have 6to4 interface before .. and till I upgrade to 3.0rc2 I can ping from my computer ipv6 resources in world .. now .. it's NOT WORKING ...