When I do a scan on the LTE scanner, I detect 4 operators, 3 is Forbidden, but the fourth is available.

Below is the information of the available operator.

A Operator MCC MNC Access Technology
Available 649 06 64906 Evolved 3G (LTE)

I have a LHG LTE kit and with SIM from one mobile provider it is working hunder percent, but from another provider, it is not working. I also receive the subscriber-number: +CME ERROR: 100 I really need to get this working as I have an ISP customer that is very interested in using Mikrotik as there ...

Hi all I have the exact same problem after upgrading my RB951G-HnD to 6.40.5. It beeps every 6 seconds. It doesn't get picked up in Netinstall. Also, Windows cannot keep a LAN connection to the RB, it keeps on Identifying and then cable unplugged (loop). This occurs on all ports. Is there any soluti...

Hi there I have 2 Ubiquiti Nanobeams setup point to point and have a RB750 on each side for the routing. RB1 ether1 192.168.10.8/24 (Nanobeam connected to this interface IP = 192.168.10.1) ether2 (LAN) 10.0.20.254/24 ROS = 5.14 No firewall rules Route 10.0.1.0/24 via 192.168.10.13 Can ping from RB1 ...

Hi all I have one site with a PPTP server (call it HQ) and 3 client sites that connect to HQ with PPTP clients. All is working well and can ping from HQ all client site ip subnets and vice versa, meaning from client site I can ping HQ subnet. HQ and client sites is geographically kilometers apart an...

Do you have static routes setup? Try pinging from the router to the LAN server. Yes IP Route on server MT 750 [admin@Smurf8] > ip [admin@Smurf8] /ip> routes bad command name routes (line 1 column 1) [admin@Smurf8] /ip> route [admin@Smurf8] /ip route> print Flags: X - disabled, A - active, D - dynam...

Post your export. Sent from my SCH-I545 using Tapatalk Hi There Thank you for the reply. I have exported /ip firewall nat, /interface and /ip addresses for both routers. First the server side router's export. # IP addresses Server side # dec/20/2013 15:54:06 by RouterOS 4.11 # software id = WSN9-LL...

Do you have static routes setup? Try pinging from the router to the LAN server.

I can ping from MT router to the remote LAN, I receive a reply when I ping from ANY or the L2TP interface.

Hi there I am fairly new to MT, but am learning fast. I have a RB750 (server) and a RB951-2n (client) where a L2TP / IPSec tunnel has been configured and is working. Both MT has dynamic public IPs, am running a DYNDNS update script to map dynamic IP address to DyndDNS hostname. Both sides has intern...