Community discussions

Search found 30 matches

by b3h3m07h
Sun Jul 08, 2018 2:34 pm
Forum: General
Topic: VPN Subnet cannot access Local Subnet Hosts [SOLVED]
Replies: 4
Views: 425

Re: VPN Subnet cannot access Local Subnet Hosts [SOLVED]

Looks like the firewall didn't disable on the host.

All working well now.

Thanks again.
by b3h3m07h
Sun Jul 08, 2018 4:55 am
Forum: General
Topic: VPN Subnet cannot access Local Subnet Hosts [SOLVED]
Replies: 4
Views: 425

Re: VPN Subnet cannot access Local Subnet Hosts [SOLVED]

if i add the below to the nat table i can access the local subnet devices from the vpn subnet. /ip firewall nat add action=masquerade chain=srcnat disabled=yes dst-address=192.168.50.0/24 out-interface=!ether1 src-address=192.168.150.0/24 I didn't think i needed to use NAT. Is this the correct way o...
by b3h3m07h
Sat Jul 07, 2018 7:27 am
Forum: General
Topic: VPN Subnet cannot access Local Subnet Hosts [SOLVED]
Replies: 4
Views: 425

VPN Subnet cannot access Local Subnet Hosts [SOLVED]

I am having the issue of not being able to reach my local subnet devices e.g. 192.168.50.200 from my vpn subnet 192.168.150.0/24 while connected remotely e.g. road warrior. Local subnet 192.168.50.0/24 dhcp pool 192.168.50.10-200 VPN subnet 192.168.150.0/24 vpnpool 192.168.150.1-10 Local LAN Bridge ...
by b3h3m07h
Wed Feb 14, 2018 4:02 am
Forum: General
Topic: P2P connection to security camera recorder behind MTik
Replies: 7
Views: 1020

Re: P2P connection to security camera recorder behind MTik

Probably something to do with uPnP not being enabled with correct firewall rules. Most IP Cameras use uPnP to forward some ports for those apps and communication to their cloud service for easier connection and work around dynamic public ip's..
by b3h3m07h
Wed Feb 14, 2018 3:45 am
Forum: General
Topic: Epson WiFi MFC discovery issue and temp solution on RB2011UiAS-2HnD-IN
Replies: 0
Views: 239

Epson WiFi MFC discovery issue and temp solution on RB2011UiAS-2HnD-IN

Recently i tried to setup some epson Wifi MFC's on my network. The issue was that i could not discover them with the Epson install tool. The mfc's both were assigned an ip in the same subnet and i could ping them from the windows pc's on 3 different systems. i also tried another Access Point ( techn...
by b3h3m07h
Mon Aug 21, 2017 5:33 pm
Forum: General
Topic: securing L2TP/IPsec server connection
Replies: 15
Views: 6209

Re: securing L2TP/IPsec server connection

Clients are windows, Android and iOS. I use a port knocker app from play store and app store. the knocking then adds the clients to the secure list which is part of the requirements for the connection. Without the knock the port is closed for that device. For windows i just googled a port knocker. W...
by b3h3m07h
Sun Aug 20, 2017 8:01 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 122539

Re: v6.41rc [release candidate] is released! New bridge implementation!

still having issues with RB2011UAS-2HnD and optus (aus) Huawei E3372h-607 http://www.optus.com.au/shop/prepaid/mo ... /usb/e3372

under load, p2p , multiple users on netflix or youtube, router reboots.
by b3h3m07h
Thu Aug 17, 2017 8:39 am
Forum: General
Topic: Cannot access RB951ui remotely thru Cloud and USB 4G modem
Replies: 1
Views: 499

Re: Cannot access RB951ui remotely thru Cloud and USB 4G modem

Your 4G usb dongle sounds like is has NAT and that is why it is not getting the true WAN IP from your provider. if you can log into the device and it has a dmz option, enter the mikrotiks ip in the dmz field. if you cannot you may need to get a unit like the following which should allow DMZ to be se...
by b3h3m07h
Thu Aug 17, 2017 8:17 am
Forum: General
Topic: securing L2TP/IPsec server connection
Replies: 15
Views: 6209

Re: securing L2TP/IPsec server connection

i use the following rules with port knocking and a ipsec policy matcher (no need to open port 1701 UDP) /ip firewall filter add action=add-src-to-address-list address-list=port_knock_tcp_ph1 address-list-timeout=10s chain=input comment="PORT KNOCK" dst-port=51412 in-interface=ISP1 protocol=tcp add a...
by b3h3m07h
Tue Aug 15, 2017 1:00 pm
Forum: Wireless Networking
Topic: RB951g-2nd + e3372 (hilink and no hilink) loose connection when downloading something
Replies: 9
Views: 1346

Re: RB951g-2nd + e3372 (hilink and no hilink) loose connection when downloading something

i am also having the a similar issue with a rb2011uas-2hnd and a e3372h-607. after downloading a few files for a minute or so the connection drops and router reboots. i am using the latest 6.41rc11 and have even tried the 5v usb power injector https://shop.duxtel.com.au/product_info.php?manufacturer...
by b3h3m07h
Wed Aug 02, 2017 5:10 am
Forum: General
Topic: RB2011 & huawei e3372h-607 under load restart
Replies: 0
Views: 423

RB2011 & huawei e3372h-607 under load restart

Hi all. I have a RB2011UAS-2HnD with 6.38.7 bugfix (have tried 6.40 and other versions) and a huawei e3372h-607 connected via usb for failover. Problem is that when traffic is routed through the usb dongle the router reboots when loaded up. I have tried a factory reset with basic config and differen...
by b3h3m07h
Wed May 31, 2017 8:19 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 104106

Re: Blacklist Filter update script

Nice work. All good here.
by b3h3m07h
Wed May 31, 2017 7:19 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 104106

Re: Blacklist Filter update script

try this, worked fine on my rb2011 and usb drive # Import Intrus Managed Filter Lists # © 2016-2017 David Joyce, Intrus Technologies ##### Update your path, is you are using a USB Flash or other storage :global datapath "disk-8G/" :global datafile "dynamic.rsc" ###### DO NOT EDIT BELOW THIS POINT ##...
by b3h3m07h
Wed May 31, 2017 5:03 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 104106

Re: Blacklist Filter update script

Just made a few changes to the script as it didn't seem to delete the blacklist at the end # Import Intrus Managed Filter Lists # © 2016-2017 David Joyce, Intrus Technologies ##### Update your path, is you are using a USB Flash or other storage :global datapath "usb1/" :global datafile "dynamic.rsc"...
by b3h3m07h
Mon May 29, 2017 8:58 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 104106

Re: Blacklist Filter update script

here you go :-) # Import Intrus Managed Filter Lists # (C)2016 David Joyce, Intrus Technologies :log warning "Blacklist update in 30 seconds"; # :delay 10 :local model [/system resource get board-name] :local version [/system resource get version] :local memory [/system resource get total-memory] :l...
by b3h3m07h
Mon May 29, 2017 6:43 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 104106

Re: Blacklist Filter update script

Here is the script i use to save and execute the blacklist (dynamic.rsc) from a usb drive (named usb1) /system script add name=updateBlacklist-usb1 owner=admin policy=read,write,test source="# Import Intrus Managed Filter Lists\r\n# (C)2016 David Joyce, Intrus Technologies\r\n\r\n:log warning \"Blac...
by b3h3m07h
Fri May 26, 2017 5:36 am
Forum: Scripting
Topic: OpenDNS script error 911
Replies: 0
Views: 391

OpenDNS script error 911

I have been trying to get the following script to work but keep getting a error 911. The script just wont update my dynamic ip in the dashboard. The username is my opendns username/email address, password i have tried both the normal login password and the update-only password issued by opendns supp...
by b3h3m07h
Thu Jan 19, 2017 4:32 am
Forum: General
Topic: double upload rate on wan when using pptp client.
Replies: 2
Views: 385

Re: double upload rate on wan when using pptp client.

just a bump.

another note, i disconnected all other devices from the network so the upload is only from the vpn device on the local network
by b3h3m07h
Wed Jan 04, 2017 12:17 pm
Forum: General
Topic: double upload rate on wan when using pptp client.
Replies: 2
Views: 385

double upload rate on wan when using pptp client.

i currently have my rb951 setup as a home router and also a pptp client setup to route certain local ip's through it. what i am noticing is that when using one of the vpn routed hosts e.g. streaming from youtube, the download speeds on the WAN and PPTP are very similar but the upload speeds are quit...
by b3h3m07h
Tue Dec 27, 2016 3:00 pm
Forum: General
Topic: Uncontrolled upload using google drive
Replies: 4
Views: 881

Re: Uncontrolled upload using google drive

What type of qos setup if any have u setup for the uplink? Are you using fasttrack? What is your cpu usage like at this time? 97mbps without fast track on a 400mhz cpu might be making it hit the limit and if you are using mangle rules even worse. For my outbound traffic i mark in mangle using forwar...
by b3h3m07h
Mon Dec 19, 2016 9:41 am
Forum: Beginner Basics
Topic: Enabling DHCP in Mitrotik on bridge mode
Replies: 6
Views: 1424

Re: Enabling DHCP in Mitrotik on bridge mode

First i would put your modem into bridge mode and then use the mikrotik to do the routing dhcp server etc. This way you avoid double natting. Personally i use a rb951g wifi init Setup some firewall rules, nat on your wan interface, create a bridge and add your wifi interface and all your ether port...
by b3h3m07h
Mon Dec 19, 2016 9:15 am
Forum: General
Topic: Throttle Windows Updates
Replies: 32
Views: 15621

Re: Throttle Windows Updates

Here is what i have been using with a modified layer7 from above. Seems to be catching all windows updates, office updates etc The following checks for the content and layer7 in connections tcp 80 and 443(do i need 443?) and then adds the src address to a list which is then marked. /ip firewall laye...
by b3h3m07h
Fri Dec 16, 2016 1:49 pm
Forum: Beginner Basics
Topic: Enabling DHCP in Mitrotik on bridge mode
Replies: 6
Views: 1424

Re: Enabling DHCP in Mitrotik on bridge mode

First i would put your modem into bridge mode and then use the mikrotik to do the routing dhcp server etc. This way you avoid double natting. Personally i use a rb951g wifi init Setup some firewall rules, nat on your wan interface, create a bridge and add your wifi interface and all your ether ports...
by b3h3m07h
Thu Apr 28, 2016 11:27 am
Forum: Forwarding Protocols
Topic: forward relevant broadcast traffic to port 27036 UDP from one subnet to another?
Replies: 0
Views: 898

forward relevant broadcast traffic to port 27036 UDP from one subnet to another?

HI all At home i am running a RB951G-2HnD with two local subnets, 192.168.1.0/24 and 192.168.2.0/24. One is a wired network the other is the wifi network. i am trying to get steam's in-home streaming to communicate with systems on the other subnet but haven't had any luck. i have ip forward filters ...
by b3h3m07h
Sat Jun 13, 2015 12:27 pm
Forum: Wireless Networking
Topic: Slow Local Transfer when using additional AP, only 450KBps.
Replies: 4
Views: 730

Re: Slow Local Transfer when using additional AP, only 450KBps.

when the notebook connects to the 951 directly and not the tplink/7800n, wireless speeds are around 3000KBps.

can you have two AP's right next to each other, one on channel 1 and the other channel11 and have them not interfere?
by b3h3m07h
Sat Jun 13, 2015 4:42 am
Forum: Wireless Networking
Topic: Slow Local Transfer when using additional AP, only 450KBps.
Replies: 4
Views: 730

Slow Local Transfer when using additional AP, only 450KBps.

i have the following setup RB2011UAS-2HnD is in station bridge mode with wifi and lan ports bridged. RB951Ui-2HnD is setup as a wireless router, wifi and lan ports 1-4 on bridge, port 5 connected to adsl modem in bridge mode. tp link AP or 7800n as AP (dhcp server disabled) Patch Lead ------- wifi l...
by b3h3m07h
Tue Jun 09, 2015 9:45 am
Forum: General
Topic: slow ap to host speed
Replies: 0
Views: 431

slow ap to host speed

i have the following setup RB2011UAS-2HnD is in station bridge mode with wifi and lan ports bridged RB951Ui-2HnD is setup as wifi router, wifi and lan ports 1-4 on bridge, port 5 connected to adsl modem tp link AP or 7800n as AP (dhcp server disabled) lan lead ------- wifi link ^^^^^^^ PC ----------...
by b3h3m07h
Fri May 02, 2014 7:10 pm
Forum: General
Topic: IPVanish VPN PPTP L2TP OVPN Setup
Replies: 2
Views: 2980

IPVanish VPN PPTP L2TP OVPN Setup

Has anyone had any luck with either a PPTP, L2TP IPSec or OVPN Client setup on their router?

i am beginning to think it has something to do with ipvanish's servers as a free pptp works perfect?

Also any recommendations for a decent paid VPN with unlimited bandwidth and good speed :-)

Cheers
by b3h3m07h
Sat Dec 28, 2013 3:09 am
Forum: RouterBOARD hardware
Topic: RB951Ui-2HnD with external antennas
Replies: 18
Views: 30594

Re: RB951Ui-2HnD with external antennas

+1 for some photos. I would like to do this to one i have to get a little extra range :)