Sorry, can't tell you. I stopped using the MT for IGMP. Had to place a Fritzbox infront of the MT to full use the IPTV properly :-(

When i wrote this post, don't remember.
Actual 6.46.3

I'd try with beta version of netinstall (6.44beta61), it just might work. If you want to run stable ROS, you can still downgrade from beta after successful netinstall ...

Using the beta version, the upgrade worked fine.
Thanks !!!!

Ok, but netinstall does not work too.
Please check my youtube link in my first post.

The npk package is offered to my MT, but not installed.

Hello. No need to use netinstall. We take -> system-> packages ... '' Check for updates ''. Everything. Then the same routerboard -> System-> routerboard-> Upgrade That's what i meant with "I tried to upgrade the usual online way" :-) This does not work! The device restarts without errors...

Hi, i have an RB4011 with 6.43.4. I tried to upgrade the usual online way to 6.43.8 and by uploading the new 6.43.8 files manually to the device. The device restarts, but i'm still on the old Software version: [admin@MikroTik] /system package> print Flags: X - disabled # NAME VERSION SCHEDULED 0 ntp...

Sure, tcpdump also shows udp packets. [~] # tcpdump udp port 514 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes 17:46:01.876313 IP 192.168.215.4.58292 > NAS.syslog: [|syslog] 17:46:01.876371 IP 192....

Is there a tcpdump or similar on windows?
Maybe check if udp packets are coming from your MT.

I agree, i have paid license.

I added index=mikrotik (your index name) to all dashboard searches.
Without this i also had no results

Hi, i added some functionalities for Capsman logging. Maybe this will be helpful for someone. I'm not a Mikrotik neither Splunk expert !! ;-) Maybe you will find some errors. Please let me know. But at least this works fine here. Settings->Sourcetype->Mikrotik->Advanced->Add: Name: EXTRACT-mikrotik_...

Hi,
thanks for this work!
One question, how often do you execute the script with the scheduler?

+1 for capsman
Thanks

No, 100% not encrypted! I installed "udpxy" on my NAS. udpxy is a UDP-to-HTTP multicast traffic relay daemon: it forwards UDP traffic from a given multicast subscription to the requesting HTTP client Using this proxy, the stream works fine in VLC using http stream. But i don't understand w...

Hi, My ISP provides pppoe and IPTV stream on vlan35. So i added one Vlan35 Iface and put pppoe on this Iface. The vlan35 has ip 10.10.10.10 (apparently the Fritzbox normally used by my ISP has the same IP on vlan35). Additionally, i configured IGMP-Proxy on the Vlan35 Iface as upstream, and another ...

Sorry, here is the complete export.

Sorry, do you mean the binary backup file? this is the /export command: /interface bridge add admin-mac=D4:CA:6D:0D:BC:5B auto-mac=no comment=defconf name=bridge /interface ethernet set [ find default-name=ether2 ] name=ether2-master set [ find default-name=ether3 ] master-port=ether2-master set [ f...

Thanks for your post. I have reset a test device (rb951). Then changed the configuration as on the wiki, then done your tips. (added dhcp client and relay to the bridge, all FW & nat rules deleted) The printer get's an ip this time. but no traffic is passing can't ping from my AP to the station ...

Hello, i need to connect a MAP via wireless connection to my RB2011 (caps), to provide an ethernet port to my printer. The RB2011(&other wlan devices, like HAP&Groove) is managed by an RB3011 capsman. I tried the following modes: station -> wifi connection ok station pseudobridge -> wifi con...

Just to let you know, i tested again my config, and i don't have to add my own subnet: /routing igmp-proxy set quick-leave=yes /routing igmp-proxy interface add alternative-subnets=224.0.0.0/4,172.19.7.1/32,88.207.164.58/32,172.19.9.4/32 interface=vlan35 upstream=yes add interface=bridge-local Did n...

Unfortunately i can't test anymore.
I had the TV Stream only for a few weeks to test (with MT), they disabled the stream again
But maybe in the future, i fill book the IPTV service........

Some mor informations. I installed a linux pc with 3 NIC, Masq for default inet traffic, and installed igmpproxy. The config is really simple: quickleave phyint eth0.35 upstream  ratelimit 0  threshold 1        altnet 224.0.0.0/4;         altnet 172.19.7.1/32;         altnet 88.207.164.58/32; phyint...

Hi, i'm trying to configure my MT 951G with IPTV. My provider sends all data through Vlan35. So i configured my LAN1 port with a Vlan35, and on this Vlan35, i configured my pppoe connection. Works fine since month. On Lan5, my Local net is connected.(bridge-local) On Lan3, i have connected a laptop ...

I tried to "mix" your config with my existent config. I disabled the bridge (wlan <-> lan). Also your bridge for lan2-5 are deleted. (as i don't need them for the moment) I print my config. Maybe you have the time to have a look ? Connection to wlan works fine. Also the DHCP server pushed ...

I did not bridge with the WAN but LAN.

Lan & Wlan
eth1 = gateway = wan
eth2 = lan

Hello, i configured my RB951G on my lan with range 192.168.215.0/24 an wlan 192.168.214.0/24. What i want to do is separate both network ranges and only route some traffic ports(like http and mail). With Bridge on wlan1/eth2 disabled, the connection works fine, and the dhcp server on if wlan1 works ...

6.11 on a RB750GL. But i solved the problem already, but don't know exactly why ;-) I have these rules: add chain=forward connection-state=new dst-address=xxxxxx dst-port=54277 in-interface=pppoe-out1 protocol=udp add chain=forward connection-state=established dst-address=xxx dst-port=54277 in-inter...

Hello, i'm new with Mikrotik routers, but i already have a Problem with a simple forward rule. I'm forwarding port 24010 tcp -> no problem, i can see the connections on the destination host with tcpdump. Forwarding 54277 udp does not work at all. Can't find the problem: /ip firewall filter add chain...