Community discussions

MikroTik App

Search found 38 matches

by vader7071
Wed Mar 25, 2020 7:45 pm
Forum: General
Topic: L2TP/IPSec VPN - Remote device connects, cannot access internet
Replies: 0
Views: 1336

L2TP/IPSec VPN - Remote device connects, cannot access internet

I have followed quite a few tutorials and read up on how to create an L2TP/IPSec VPN connection to my router. Currently, I am using an RB951 routerboard. Desired Result: I am trying to connect my Samsung Note 8 to my home network for VPN access so my home firewall rules will be in effect at all time...
by vader7071
Fri Feb 14, 2020 7:21 pm
Forum: General
Topic: tool kid-control
Replies: 59
Views: 22039

Re: tool kid-control

yes, you only defined where no bandwith limiting is in place but no schedule for internet access. in your example the code should look like this: /ip kid-control add name=Drake mon=8h-19h30m tue=8h-19h30m wed=8h-19h30m thu=8h-19h30m fri=8h-19h30m sat=6h-19h30m sun=6h-19h30m See the response here. I...
by vader7071
Mon Jan 27, 2020 12:18 am
Forum: General
Topic: L2TP/IPSEC VPN with Samsung Note 8
Replies: 6
Views: 1271

Re: L2TP/IPSEC VPN with Samsung Note 8

So if you want your phone to route all traffic through the tunnel you must go to advanced options of the tunnel and look for forwarding routes and put there 0.0.0.0/0. Also check your NAT/masquerade settings in the mikrotik. I apologize for taking so long. Been out of town for work. I'm not sure I ...
by vader7071
Fri Jan 17, 2020 8:16 pm
Forum: General
Topic: L2TP/IPSEC VPN with Samsung Note 8
Replies: 6
Views: 1271

Re: L2TP/IPSEC VPN with Samsung Note 8

Hi! I've written down the steps I took to have L2TP/IPSEC from my S8 with Android 9 to my Mikrotik. https://forum.mikrotik.com/viewtopic.php?f=2&t=155058&p=769642&hilit=l2tp#p769642 The config is done in WebFig but I guess you can translate them to CLI. Why would you leave the VPN on when at home o...
by vader7071
Fri Jan 17, 2020 7:47 pm
Forum: General
Topic: L2TP/IPSEC VPN with Samsung Note 8
Replies: 6
Views: 1271

Re: L2TP/IPSEC VPN with Samsung Note 8

Hi! I've written down the steps I took to have L2TP/IPSEC from my S8 with Android 9 to my Mikrotik. https://forum.mikrotik.com/viewtopic.php?f=2&t=155058&p=769642&hilit=l2tp#p769642 The config is done in WebFig but I guess you can translate them to CLI. Thank you! I just went through following your...
by vader7071
Fri Jan 17, 2020 5:31 pm
Forum: General
Topic: L2TP/IPSEC VPN with Samsung Note 8
Replies: 6
Views: 1271

L2TP/IPSEC VPN with Samsung Note 8

I am wanting to create a VPN from my Note 8 to my Mikrotik router. Current setup: Router = RB951G OS = 6.46.2 Phone = Samsung Note 8 OS = v9 "Pie" I have been looking for months at various VPN examples and tutorials, and I am just confusing myself. Here is what the PHONE has for setup: Type: * PPTP ...
by vader7071
Thu Nov 07, 2019 2:45 am
Forum: General
Topic: tool kid-control
Replies: 59
Views: 22039

Re: tool kid-control

I have been reading this thread, and I just found kid control on my RB951. Currently running OS 6.45.7, Firmware 6.45.7 I created the following: /ip kid-control add name=Drake tur-sun=06:00:00-19:30:00 tur-mon=08:00:00-19:30:00 tur-tue=08:00:00-19:30:00 tur-wed=08:00:00-19:30:00 tur-thu=08:00:00-19:...
by vader7071
Thu Nov 07, 2019 2:24 am
Forum: Beginner Basics
Topic: Issue connecting to RB951 via Winbox - MAC works, IP does not
Replies: 4
Views: 918

Re: Issue connecting to RB951 via Winbox - MAC works, IP does not

I apologize for the delay. I was able to locate the issue. In trying to work on some firewall rules for my son, I had done an export of the configuration of the router, When I was going through the txt file, I came across this section: /ip service set telnet disabled=yes set www disabled=yes set ssh...
by vader7071
Tue Nov 05, 2019 2:04 am
Forum: Beginner Basics
Topic: Issue connecting to RB951 via Winbox - MAC works, IP does not
Replies: 4
Views: 918

Issue connecting to RB951 via Winbox - MAC works, IP does not

I am not sure what information to include in my original post. I have an RB951 that is running OS 6.45.7. I am using Winbox v3.20 I have searched the forum and searched on Google and have not found a solution yet. I am on the same network as the 951 (my laptop is using the WiFi on the 951). When I t...
by vader7071
Mon Nov 04, 2019 7:49 pm
Forum: General
Topic: VPN Always On question
Replies: 0
Views: 507

VPN Always On question

I have an RB951G-2HND running OS 6.45.2. I am having an issue with a VPN I would like to set up. I tried this about a year ago, and ended up getting busy and shelved the project, but I would like to get it going. Here is the setup: Hardware RB951 as my main router at my home. I am using the internal...
by vader7071
Wed Jul 31, 2019 3:50 pm
Forum: Wireless Networking
Topic: Help with a wireless backbone
Replies: 3
Views: 933

Re: Help with a wireless backbone

I would use the Wireless Wire to bridge the buildings as it can provide wire speeds. Thank you. I think that will work well for my application. So now my equipment list updates to: Equipment: (1) RB4011 router (1) Wireless Wire set (2) WAP (one at each building) (1) switch (a second switch for the ...
by vader7071
Tue Jul 30, 2019 5:47 pm
Forum: Wireless Networking
Topic: Help with a wireless backbone
Replies: 3
Views: 933

Help with a wireless backbone

I am contemplating installing a router system for my business, and I know what I have in my head, but I would like to make sure what I am seeing in my head will work. I will need two networks. Network "A" will be a 192.168.x.x network. Network "B" will be a 10.x.x.x network. Both networks will have ...
by vader7071
Tue Jan 22, 2019 2:50 am
Forum: Forwarding Protocols
Topic: L2TP/IPSec VPN - No access from inside the network
Replies: 3
Views: 1745

Re: L2TP/IPSec VPN - No access from inside the network

@leoservices , have you had a chance to look at my setup? I'm hoping to get this resolved soon. Thank you for your help.
by vader7071
Sat Dec 29, 2018 11:19 pm
Forum: Forwarding Protocols
Topic: L2TP/IPSec VPN - No access from inside the network
Replies: 3
Views: 1745

Re: L2TP/IPSec VPN - No access from inside the network

Thank you. Here is what I have, and the results: /ip dchp-server leases mac-address=11:22:33:44:55:66 make-static=yes address=192.168.15.62 /ppp secret name=taba service=l2tp profile=default-encryption local-address=192.168.20.60 remote-address=192.168.20.61 /ppp profiles name=default-encryption loc...
by vader7071
Fri Dec 28, 2018 5:51 pm
Forum: Forwarding Protocols
Topic: L2TP/IPSec VPN - No access from inside the network
Replies: 3
Views: 1745

L2TP/IPSec VPN - No access from inside the network

My son has a Samsung Tab A tablet with Cell-Data/WiFi. My end goal is that when my son has his tablet away from the house, his tablet connects to my home CR109 via an L2TP/IPSec VPN (I am doing this because we have some specific filters set up for him and I want to keep them active at all times). I ...
by vader7071
Fri Aug 17, 2018 5:25 pm
Forum: General
Topic: Issue with disabling [REDACTED] on Mikrotik
Replies: 1
Views: 783

Issue with disabling [REDACTED] on Mikrotik

A while back, I enrolled in [REDACTED] for my home. I setup the [REDACTED] on my Mikrotik following these instructions: https://support.[REDACTED].com/mikrotik-configuration . I want to completely remove the [REDACTED] setup. I have tried reversing the instructions, but when I do, my internal networ...
by vader7071
Tue Jul 10, 2018 2:48 pm
Forum: Scripting
Topic: script to run manual bandwidth test and save to file
Replies: 8
Views: 6842

Re: script to run manual bandwidth test and save to file

I was able to remote in. Here is how I did it: Create a script with this in it. I named this one "server0". Make sure to update the IP address of the test server. You can also make the test run longer than 15 seconds, but when I did this, i didn't want to bog anything down on the test server's end. ...
by vader7071
Tue Jul 10, 2018 2:18 pm
Forum: Scripting
Topic: script to run manual bandwidth test and save to file
Replies: 8
Views: 6842

Re: script to run manual bandwidth test and save to file

I did. I'm away from my router right now, but I will post how I got it to work tonight.
by vader7071
Fri Jan 12, 2018 10:43 pm
Forum: Scripting
Topic: Bandwidth test script
Replies: 2
Views: 1995

Re: Bandwidth test script

Were you able to get this script to work? I am on V6.41 and trying to read the variables from the bandwidth test and I am unable to. Ones such as $status and $duration.
by vader7071
Fri Jan 12, 2018 9:43 pm
Forum: Scripting
Topic: script to run manual bandwidth test and save to file
Replies: 8
Views: 6842

Re: script to run manual bandwidth test and save to file

An update to this. I tried the following: /file set report.txt contents=(/tool bandwidth-test $target duration=10s user=$user pass=$pass) And what I get is "true" in the file. The file gets accessed and modified, but the only thing in it is "true". It also just spits it out. The test should take abo...
by vader7071
Thu Jan 11, 2018 10:18 pm
Forum: Scripting
Topic: script to run manual bandwidth test and save to file
Replies: 8
Views: 6842

script to run manual bandwidth test and save to file

I am hoping some one can help get this correct. Here is the desired end result. I want to be able to run a script (manually) where my CRS109 runs a bandwidth test and then saves the results to a file. I want the test to run only 10 seconds. This line of code works from the terminal screen and runnin...
by vader7071
Tue Aug 29, 2017 7:52 pm
Forum: General
Topic: Issue with VPN connecting behind router
Replies: 7
Views: 1258

Re: Issue with VPN connecting behind router

The x.x.100.x and x.x.15.x is working perfect. All I had to do there was add the DST address in the original mangle rule and I got the access I needed. Now I am trying to make my Dial In VPN work. This one will be a little different. I hope my diagram below makes sense. This is how I see it in my he...
by vader7071
Mon Aug 28, 2017 6:58 pm
Forum: General
Topic: Issue with VPN connecting behind router
Replies: 7
Views: 1258

Re: Issue with VPN connecting behind router

Lambert, been trying to make the new mangle rule work. I basically copied the original rule exactly, except modified it around the IP structure for the "dial-in" VPN. It does not work. Here is what I have: <Mangle Rule> {General} Chain: prerouting Src: 192.168.15.0/24 Dst: ! 192.168.15.0/24 (I think...
by vader7071
Mon Aug 28, 2017 4:05 pm
Forum: General
Topic: Issue with VPN connecting behind router
Replies: 7
Views: 1258

Re: Issue with VPN connecting behind router

Thank you. My goal is to have just 2 other VPNs other than the [REDACTED] #1 would be my office (critical) #2 would be my laptop when away from home. (nice to have) I got the Dst. address loaded and tested. It worked perfect. Thanks so much. My next step will be to try and create the second mangle r...
by vader7071
Sat Aug 26, 2017 12:59 am
Forum: General
Topic: Issue with VPN connecting behind router
Replies: 7
Views: 1258

Re: Issue with VPN connecting behind router

Doing some research I have discovered it is a mangle rule that is causing the issue. I am not sure what I need to do to adjust or edit this rule to allow pass through to the rest of the network. My mangle rule is: General Chain: prerouting Src. Address: 192.168.15.0/24 Action Action: mark routing Ne...
by vader7071
Fri Aug 25, 2017 8:54 pm
Forum: General
Topic: Issue with VPN connecting behind router
Replies: 7
Views: 1258

Issue with VPN connecting behind router

I have a 951G-2HnD. As of yesterday, I had a VPN setup between my home and my office. My home network is 192.168.15.x. My office is 192.168.100.x I have a network attached storage on my 192.168.15.x As of yesterday I was able to access my NAS from my office. I also had a "dial in" vpn setup on my la...
by vader7071
Wed Jul 12, 2017 9:53 pm
Forum: Wireless Networking
Topic: Creating large WAP using Microtik Equipment ( RB912UAG-5HPnD-OUT)
Replies: 3
Views: 635

Re: Creating large WAP using Microtik Equipment ( RB912UAG-5HPnD-OUT)

I've included an image of the desired coverage area. I don't have a preference if this is done daisy chain or start topology. I am looking for best effectiveness with minimal cost. Now that being said, I will pay for quality, I just don't want to drop $10,000 on parts when I can do the same thing wi...
by vader7071
Wed Jul 12, 2017 7:16 pm
Forum: Wireless Networking
Topic: Creating large WAP using Microtik Equipment ( RB912UAG-5HPnD-OUT)
Replies: 3
Views: 635

Creating large WAP using Microtik Equipment ( RB912UAG-5HPnD-OUT)

I am in the process of helping a non profit set up a WiFi coverage area. Here are the basics. I will have a headend unit/router (example, an RB951) and from this I will want to transmit to about 3 or 4 locations where I will have the relay stations and the WAP. I was thinking I could use the RB912UA...
by vader7071
Tue Jul 19, 2016 4:25 am
Forum: General
Topic: Issue connecting with VPN
Replies: 1
Views: 426

Re: Issue connecting with VPN

I found my solution.  I followed the directions here:

https://rbgeek.wordpress.com/2014/08/26 ... -mikrotik/

and my issue was my ARP setting. Once i set it to proxy-arp instead of just enabled, that fixed it..
by vader7071
Tue Jul 19, 2016 2:06 am
Forum: General
Topic: Issue connecting with VPN
Replies: 1
Views: 426

Issue connecting with VPN

I have searched the forum, and I am not sure if I did not see it, or I am not knowledgeable enough to know what I am looking for. Here is my situation.  I have a RB951G Mikrotik.  I have setup a VPN so I can connect my laptop to my home network when I am away.  My home network is 192.168.15.x I have...
by vader7071
Fri Apr 08, 2016 9:52 pm
Forum: General
Topic: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)
Replies: 5
Views: 781

Re: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)

I also forgot to mention, currently my router is at my house, and my friends (that I am trying to make work) is at my office. So the 2 units are not connected in any way
by vader7071
Fri Apr 08, 2016 9:50 pm
Forum: General
Topic: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)
Replies: 5
Views: 781

Re: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)

To copy it, I did an export like I did here and removed all mac addresses or anything that was specific to the physical router itself.
by vader7071
Fri Apr 08, 2016 9:14 pm
Forum: General
Topic: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)
Replies: 5
Views: 781

Re: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)

There is one more "feature" I would like to add, but it is not critical. If possible, I would like ether5-LAN to be on 10.0.0.0/24 and not on 192.168.25.0/24.
by vader7071
Fri Apr 08, 2016 9:01 pm
Forum: General
Topic: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)
Replies: 5
Views: 781

Re: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)

Export from 951: [admin@Wolfpack-RB951G] > export # apr/08/2016 12:39:20 by RouterOS 6.34.3 # software id = LVYF-JY9J # /interface bridge add mtu=1500 name=bridge1 /interface ethernet set [ find default-name=ether1 ] name=ether1-LAN speed=1Gbps set [ find default-name=ether2 ] name=ether2-WAN speed=...
by vader7071
Fri Apr 08, 2016 8:02 pm
Forum: General
Topic: RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)
Replies: 5
Views: 781

RB951Ui-2HnD trouble with setup (2 wlan and 2 lans)

I have an RB951 at my home that was configured for me. This particular router is setup so that ether2 is my WAN, and all other ether (ether1,3,4,5) are all LAN on 192.168.15.x. I also have a wlan1 that is on 192.168.15.x I was set up a second wlan (wlan2) that is configured to be on 10.0.0.x. wlan2 ...
by vader7071
Wed Jan 08, 2014 3:12 pm
Forum: Wireless Networking
Topic: Trying to connect Eye-Fi X2 pro to RB951G router
Replies: 5
Views: 1625

Re: Trying to connect Eye-Fi X2 pro to RB951G router

Yes. DCHP is working. I have at least 12 other items that connect over the wireless and gets an IP address from DCHP.
by vader7071
Wed Jan 08, 2014 2:23 pm
Forum: Wireless Networking
Topic: Trying to connect Eye-Fi X2 pro to RB951G router
Replies: 5
Views: 1625

Re: Trying to connect Eye-Fi X2 pro to RB951G router

I did. I may have cut my other listing short. I have been working on this issue since Christmas talking with Eye-Fi and I forget this forum isn't up to speed. I followed the instructions from Eye-Fi. Initially, the card would error "DCHP timeout" (from Eye-Fi they were saying the DCHP server was not...
by vader7071
Wed Jan 08, 2014 1:02 am
Forum: Wireless Networking
Topic: Trying to connect Eye-Fi X2 pro to RB951G router
Replies: 5
Views: 1625

Trying to connect Eye-Fi X2 pro to RB951G router

I have an Eye-Fi card ( card specs ) and I am trying to connect this card to my network, but to date is has stumped both me and Eye-Fi. What the card does is simple. It is an SD card for your camera, and as soon as you get in range of your home network and the camera is on, the card automatically du...