Community discussions

MUM Europe 2020

Search found 17 matches

by hwtech
Tue Oct 07, 2014 6:02 pm
Forum: General
Topic: CCR1009-8G-1S-1S+ and APC SmartUPS 1500
Replies: 3
Views: 1673

Re: CCR1009-8G-1S-1S+ and APC SmartUPS 1500

With 6.20 i have the same problem. When i add the UPS under System/UPS tells me that it's Offline.

Someone have the same problem? UPS package is very useful! :(

Thanks
by hwtech
Thu Oct 02, 2014 1:47 pm
Forum: General
Topic: CCR1009-8G-1S-1S+ and APC SmartUPS 1500
Replies: 3
Views: 1673

Re: CCR1009-8G-1S-1S+ and APC SmartUPS 1500

Today i'll try if the 6.20 package solves the problem.

But if I connect the APC UPS to the USB port of ccr1009 does it work? I need an usb hub for power injection?

Thanks!
by hwtech
Tue Sep 30, 2014 1:25 pm
Forum: General
Topic: CCR1009-8G-1S-1S+ and APC SmartUPS 1500
Replies: 3
Views: 1673

CCR1009-8G-1S-1S+ and APC SmartUPS 1500

Hi, yesterday i replaced my RB1100AHx2 with a new CCR1009-8G-1S-1S+. Everything went good except UPS configuration with serial cable (modified as it says on the site http://wiki.mikrotik.com/wiki/Manual:System/UPS). With "old" RB1100AHx2 the ups worked perfectly and was immediately recognized with t...
by hwtech
Wed Jul 30, 2014 2:01 pm
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

Thanks rextended for examples....i'm working on it! :D ------------------------------------------------------------------- Sto aggiustando i tempi all'interno dello script perchè ho notato che la connessione pppoe non sempre ci mette 1/2 secondi per tornare up, alcune volte ce ne mette anche 7/8. Gr...
by hwtech
Sat Jul 26, 2014 1:42 pm
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

:if ([/ip address get [find interface="pppoe-wan"] value-name=address] in 172.16.0.0/12) do={ :log info message="Indirizzo fornito dal provider interno a 172.16.0.0/12"; }; [/quote] Ho provato ma nel log non compare nulla, che possa essere un bug della versione 6.17? Ho notato che "/ip address get ...
by hwtech
Fri Jul 25, 2014 2:37 am
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

I tried this : :local newIP [/ip address get [find interface="pppoe-wan"] address]; :if ($newIP in 172.16.0.0/16) do={ :log info "NAT isp"; } but nothing.....someone can help me? I have no experience in scripting... :( ---------------------------------------------------------- Mi sapresti dire se pi...
by hwtech
Fri Jul 25, 2014 12:59 am
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

How can I write a script that makes a comparison between the dynamic address on pppoe and a class of addresses 172.16.0.0/16 (because i see that when isp give me a NAT public IP it is always of this class 172.16.xx.xxx/32). Usually after 3 or 4 disconnect and reconnect of pppoe-client the isp give m...
by hwtech
Sat Jun 21, 2014 1:36 pm
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

You think it is possible to create a script that checks the ip address on startup just got and if, for example, does not begin with 188.xx.xx.xx disable and re-enable the pppoe-client to obtain an address that is not private? :?:

Thanks
by hwtech
Fri Jun 20, 2014 12:47 pm
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

When the two addresses are different in IP/Addresses i always see something like 172.16.xxx.xxx , instead of www.whatsmyip.org that show me always something like 2.40.xxx.xx But when the two addresses are the same the IP is 188.153.xxx.xxx (always!) I'm behind a Carrier Grade NAT (CGN) System? What ...
by hwtech
Thu Jun 19, 2014 8:53 pm
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

Dial on demand is disabled. If i disable pppoe-client and enable it after a few seconds i get an IP address other than previous (obviously because i don't have static public ip but dynamic). Sometimes the new IP address under menu IP/Addresses is the usual i see on www.whatsmyip.org My mikrotik isn'...
by hwtech
Thu Jun 19, 2014 3:28 pm
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Re: Public IP - problem with IP Cloud

Hi normis, thanks for reply. My serial is 4185022491E3/312

At this time the two IP addresses do not match
by hwtech
Thu Jun 19, 2014 2:35 pm
Forum: General
Topic: Public IP - problem with IP Cloud
Replies: 21
Views: 5816

Public IP - problem with IP Cloud

Hi, i'm trying to use IP cloud service but sometimes it gives me an error : "DDNS server received request from xx.xx.xxx.xxx but your local ip was yy.yy.yyy.yyy" At home my mikrotik use pppoe-client on WAN directly to ISP (standard contract for domestic use, dynamic ip). Sometimes i noticed that Dyn...
by hwtech
Tue Jan 28, 2014 12:49 am
Forum: General
Topic: NAT between local subnets
Replies: 6
Views: 1271

Re: NAT between local subnets

Ports on mik have these addresses : Port4 -> 192.168.200.1 Port5 -> 192.168.143.1 Then rule becomes : dst-address=192.168.143.1 protocol=tcp port=80 in interface=ether5 action=dst-nat to address=192.168.200.4 to ports=80 ? With this rule i can access web server at 192.168.200.4 if my ip address is 1...
by hwtech
Mon Jan 27, 2014 8:05 pm
Forum: General
Topic: NAT between local subnets
Replies: 6
Views: 1271

Re: NAT between local subnets

From 192.168.143.x you should be able to reach only the address 192.168.200.4 so we also need some firewall rules.

What do you suggest? Thanks
by hwtech
Mon Jan 27, 2014 7:41 pm
Forum: General
Topic: NAT between local subnets
Replies: 6
Views: 1271

NAT between local subnets

Hi, i have 2 subnets on my CCR1016 : 192.168.200.0/24 (port4) and 192.168.143.0/24 (port5) There is a webserver (192.168.200.4) that accept input traffic only from his subnets 192.168.200.0/24 . What rule (src-nat?) should I create so that I can reach the webserver from 192.168.143.0/24? I have to m...
by hwtech
Mon Jan 27, 2014 12:24 pm
Forum: General
Topic: exclude IP from webproxy rule
Replies: 2
Views: 1741

Re: exclude IP from webproxy rule

thank's a lot! :D
by hwtech
Sun Jan 26, 2014 11:29 pm
Forum: General
Topic: exclude IP from webproxy rule
Replies: 2
Views: 1741

exclude IP from webproxy rule

I want to add transparent web proxy to the subnet office (192.168.200.0/24). I have 4 ipsec tunnes that i want to exclude from webproxy (always use port 80 through ipsec tunnels). Where should I place the NAT rule (add chain=dstnat protocol=tcp src-address=192.168.200.0/24 dst-port=80 action=redirec...