Thanks, today my provider hooked me up so i had a valid fiber connection, this time it worked! This is what i did to use the SFP instead of the ONU Addresses -> Add New -> Interface SFP with address 192.168.1.15/24 tools -> telnet -> ssh ONTUSER@192.168.1.10 password is 7sp!lwUBz1 set_serial_number ...
Thanks for the tip. i have put the SPF in a temp router to play with it. I have created a 192.168.1.0/24 network and added the SFP to 192.168.1.15/24 > ip/address/print Flags: X, D - DYNAMIC Columns: ADDRESS, NETWORK, INTERFACE # ADDRESS NETWORK INTERFACE 0 192.168.1.1/24 192.168.1.0 LAN-bridge 3 19...
Hi, I have bought a GPON SFP module (https://www.fs.com/de-en/products/133619.html), with the goal to eliminate the Huawei HG8010G ONT which is currently between my fiber and my Mikrotik. I would like to connect with it via SSH, so i can change the Mac and vendor settings. But i'm not able to make a...
Hi, I have setup VPN succesfully using l2tp with ipsec (using a strong secret and user/passwd) and use it many times because i do not trust open wifi spots. I'm in the illusion i have set it up secure, but i was checking my logs and saw that yesterday there where massive errors in the logfile of a p...
Hi All, I would like to forward only certain ports for VPN connected clients. But in the firewall rules i do not seen any differences in the logging for a client connected via VPN of directly connected Which items should be different so i can distinct a VPN connected client from a normal client? It ...
Thanks one step further! i have added the L2TP Server Binding, via PPP -> Add new -> L2TP Server Binding Set the name to l2tp-madcat and the user to "madcat" (the same as i have set in PPP -> secrets -> name) And am now able to see the interface in the Firewall and NAT rules. it is invalid...
Hi All, i would like to allow certain incoming ports only from VPN connected clients. So the port is open when connected by vpn, but is closed when the clients is not connected by VPN When a client is connected i do see the interface "l2tp-user", and i can configure it like this: Chain:for...
I would love to hide that my router is from a certain brand with a specific version for security reasons.
Wouldn't it be great if the login page could be changed with another html page.
Or even better be able to run a small webserver on the router that supports html.
i have an issue with the addresslist feature which is updated this release.
When i change or add an adresslist under firewall, the router will hang and does not accept any connections until it's reset again
Hi All, i'm a new user to Mikrotik but i like it a lot :) i have a 2011UiAS-2HnD with firmware 3.1 running on Routerboard 6.7. i have successfully configured the router to connect with PPPoE over vlan 6 to my fiber provider (KPN) and also have a VPN server running. i'm able to connect my toys to the...
Hi i have the same problem. I'm running version 6.7 on a 2011UiAS-2HnD. When i add a new item or change the name of a list on the adres list under "Firewall -> Adress Lists" the router blocks all communication. This happened to me first when i was connected from the WAN side, but happend t...
Hi i have the same problem. I'm running version 6.7 on a 2011UiAS-2HnD. When i add a new item or change the name of a list on the adres list under "Firewall -> Adress Lists" the router blocks all communication. This happened to me first when i was connected from the WAN side, but happend t...