MikroTik

mblfone

Same here. v7.14.2 OK, v.7.15rc not. SSH, Winbox, RoMON not working, webfig, telnet works.

Confirmed here as well: RoMON not working after 7.15rc1. More specifically, RoMON is no longer working through microwave links. I had to create EOIP tunnels to get Romon to access all of our routers.

mblfone

Thanks for the clarification. I understand!

mblfone

Hello, I am trying very hard to not botch an upgrade from version 6 to version 7 this weekend. In viewing the old V6 vs. new V7 and some of the new syntax, I am confused about the relationship between the BGP connection and the template. -Since my BGP peering is static, I am not sure if I even need ...

mblfone

I want to confirm the SFP issues (noted above) that ensue when the router is upgraded, in my case from 7.11.2 to 7.12.1 on a 2216 router. Initially I couldn't get a MT 10G SFP to come back online. I committed the 7.12.1 routerboard firmware, rebooted and it restored. I was not aware that ALL of my M...

mblfone

It blows my mind how Microsoft can screw up such a simple program.

Ah well, this is what happens sometimes when you have genius level intelligence I guess!

mblfone

Thanks Rextended!

It WAS Windows 11 notepad. Notepad ++ has no issues. I haven't seen that before but will keep it in my mind from here forward.

Thanks!

mblfone

Wordpad?

mblfone

I am!

mblfone

Yup! I am upgrading from a V6 router to v7 router. Sorry for the confusion. I will try the terse recommendation and report back.

Thanks for the help!

BTW, I am not expecting this to all be pasted especially the much reworked BGP.

mblfone

The text IS from the V6 .rsc file. The router is out of the box V7. I don't think I want to try moving it back to V6 then upgrade.

Does my thought train seem logical?

mblfone

Hello, I am trying to upgrade a router from 6 to 7. I had hopes that I could simply copy and paste the configuration in sections. As an example, when I open a terminal in V7, go to /ip firewall filter and paste the following config: add action=drop chain=input dst-port=22 protocol=tcp src-address-li...

mblfone

Hello,

I appreciate this post but do not appreciate the lack of response from MT on this. I need these CCR2004 routers but am NOT ordering them from MT due to this issue being unresolved.

Again, thanks for the posts!

mblfone

I have the same issue as Nevolex. Windows 10, 64 bit laptop. Zoom in helps but I have to repeat it every time. One more level of zoom in would be great too.

mblfone

I was not successful by turning off bridge firewall. On another note, I was not successful with IP firewall either. I actually tried that method first. I will retry IP Firewall and post the config later today.

mblfone

Interesting thought! I will give that a shot and report back!

mblfone

Hello, I am having a dreadful time getting results from a bridge firewall rule. I have my computer pinging 8.8.8.8 on ether3 and I have net on ether5. With the following bridge firewall filter, I expect to have a pause in my pinging but I do not. I have tried different IN and OUT interfaces, but thi...

mblfone

Unfortunately after more testing, I am having the same issue. I will try another computer over the weekend. Maybe I need to uninstall Winbox and try it again. Winbox disconnects just as the "Downloading Descriptors" banner appears and just before it should open the Winbox GUI. It was worth...

mblfone

Thanks for your help! Resetting the configuration by navigating to System/Reset Configuration/, checking the "No default configuration" and selecting reset configuration does it. The remove configuration script button when you initially log in should be removed from future releases of rout...

mblfone

Thanks for the reply!

When I first log in via layer 3, Winbox gives me the option upon login to remove configuration. Are you saying that removing the default configuration via the system/reset configuration/check no default configuration/ is the way to achieve the desired result?

mblfone

Hello, I have a very easy to replicate problem that I hope someone has an idea on now to resolve. After I log into a new router (any new HEX router) via Winbox, layer 3 and remove the configuration, I cannot log in via the MAC address which I see and am able to populate in the winbox neighbors tab a...

mblfone

I believe it means default configuration.

mblfone

I am still waiting for a descent alignment procedure. This is the biggest downfall.

mblfone

"The testing branch is in beta these days, not RC. I recommend 6.42.9 for production deployment." I haven't tried 6.42.9 yet. I have been going between the current and testing versions and am neither having much luck keeping a stable link nor am I confident in my alignment. Would you pleas...

mblfone

Pretty annoying actually, not even the station displays ANY sort of signal, MCS rates, PHY, NOTHING all is blank, with the latest RC! How has nobody seen this yet??

You are using the most recent beta. I get that too, I used montior 0 on the CLI to get around that.

mblfone

Hello, I am still confused about the layer 2 routing issue with this upgrade. I have a CCR1016-12G with which we use layer 2 routing. No switch button shows within Winbox. This router is also not listed in the Manual:Switch Chip Features article in the wiki. Although I can go to "/interface eth...

mblfone

I think that the correct command to shut down beamforming is /interface w60g set 0 tx-sector=32... I have no idea what the "0" is in the set command however.

Updating my prior post...

mblfone

I am as well having issues getting these things aligned... 1) Using the LED method absolutely won't work. If I use this my dish is physically aligned 20 degrees off of the remote dish. 2) MT provides few definitions on what we are seeing on the monitor/status menus. Signal, what is this exactly? Is ...

mblfone

Hello,

I updated to v6.40.8 this morning. I was working in Winbox this evening and kept getting disconnected. I have updated to the newest Winbox release and am still getting disconnected. There is no log entry as to why.

This seems to be since my v6.40.8 upgrade.

Any thoughts?

mblfone

Search the forum. You will find the answer. BartoszP, If you cannot provide a useful post then don't post at all. This is a reasonable question. Nikutdk, I as well searched the posts for slingshot and did not find anything either. I believe that Winbox was upgraded to prevent the vulnerability. If ...

mblfone

Kevo,

Let me know if it passes the six month test. Maybe it is a hardware issue with the 226.

mblfone

Hello, I had the same issue. I emailed Mikrotik several times, opened a trouble ticket. They had me flash to current rev firmware; it still continued. This is a problem which would take down our entire WISP. I replaced it with a competitor's model and have had no problems. We are at 100% uptime sin...

mblfone

Hello, I had the same issue. I emailed Mikrotik several times, opened a trouble ticket. They had me flash to current rev firmware; it still continued. This is a problem which would take down our entire WISP. I replaced it with a competitor's model and have had no problems. We are at 100% uptime sinc...

mblfone

I totally agree. I had issues with their switches. It would stop passing traffic and take down many many customers. I swapped it with a competitor's product and haven't had any issues. This is after following their recommendation to reflash the switch from scratch, twice. I was able to eBay them to ...

mblfone

Hello, Thanks for all of the work on Winbox. I may not be understanding the master password concept altogether. If I choose "Keep Password" in the current session, when Winbox is started the next time, the password is available for someone to log into the last router session without enteri...

mblfone

Hi MT We have updated or CCR to 6.9 and we are still seeing port flapping, any changes to a Ethernet interface will cause the router to crash and only a hard power off and on will bring it back. Also there is still a issue with Ethernet TCP through put, we still can not use our 100mb leased line to...

Search found 35 matches

Re: v7.15rc [testing] is released!

Re: BGP relationship between connection and template [SOLVED]

BGP relationship between connection and template [SOLVED]

Re: v7.12.1 [stable] is released!

Re: Update config from 6 to 7 [SOLVED]

Re: Update config from 6 to 7 [SOLVED]

Re: Update config from 6 to 7 [SOLVED]

Re: Update config from 6 to 7 [SOLVED]

Re: Update config from 6 to 7 [SOLVED]

Re: Update config from 6 to 7 [SOLVED]

Update config from 6 to 7 [SOLVED]

Re: CCR2004 packet loss

Re: winbox interface too small

Re: Simple bridge firewall rule

Re: Simple bridge firewall rule

Simple bridge firewall rule

Re: I cannot log into any HEX router with Winbox after the configuration is removed.

Re: I cannot log into any HEX router with Winbox after the configuration is removed.

Re: I cannot log into any HEX router with Winbox after the configuration is removed.

I cannot log into any HEX router with Winbox after the configuration is removed.

Re: What does "defconf" mean?

Re: LHG 60G experience

Re: LHG 60G experience

Re: LHG 60G experience

Re: v6.42.9 [long-term] is released!

Re: LHG 60G experience

Re: LHG 60G experience

Re: v6.40.8 [bugfix] is released!

Re: Mikrotik hack descovered ?

Re: CRS125-24G-1S locks up, passes only ARP traffic

Re: CRS125-24G-1S locks up, passes only ARP traffic

Re: CRS125-24G-1S locks up, passes only ARP traffic

Re: CCR1072-1G-8S+ memory

Re: Winbox 3 RC

Re: CLOUD CORE ROUTER