Community discussions

Search found 23 matches

by Kliwer
Fri Jul 05, 2019 12:04 pm
Forum: Wireless Networking
Topic: Max TX Rate
Replies: 0
Views: 221

Max TX Rate

Hi,
how to setup max TX Rate on wireless station like it is possible on UBNT gear? I tried setting HT MCS on station but that set that MCS to TX and RX chains. How to set it to TX chain only?
by Kliwer
Thu Sep 20, 2018 2:50 pm
Forum: RouterBOARD hardware
Topic: 100Mb LAN - what's the point?
Replies: 13
Views: 1626

Re: 100Mb LAN - what's the point?

The 100Mbit chip does get the price down a lot.
Thanks for that info.
by Kliwer
Wed Sep 12, 2018 1:32 pm
Forum: RouterBOARD hardware
Topic: 100Mb LAN - what's the point?
Replies: 13
Views: 1626

100Mb LAN - what's the point?

Hi. I am wondering what's the point in using 100Mb ports in devices today? Is it really that much cheaper? There are so many nice devices from Mikrotik but seeing 100Mb port on them makes them useless, like new devices from 60ad series.
by Kliwer
Fri Jun 29, 2018 9:17 am
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 21899

Re: v6.42.5 [current]

What is the OID for RSSI on w60g?
.1.3.6.1.4.1.14988.1.1.1.8.1.12.1
This worked for me.
by Kliwer
Wed Jun 20, 2018 12:35 pm
Forum: Wireless Networking
Topic: Wireless Wire Signal vs RSSI
Replies: 1
Views: 893

Wireless Wire Signal vs RSSI

Hi. I have two links using wAP60ad and the signal value is confusing to me. Link 1 AP side: [admin@AP_60ad] > /int w6 moni 0 connected: yes frequency: 58320 remote-address: 04:D6:AA:67:89:CA mcs: 8 phy-rate: 2.3Gbps signal: 80 rssi: -70 tx-sector: 61 rx-sector: 96 Link 1 STA side: [admin@STA] > /int...
by Kliwer
Sat Jun 09, 2018 8:14 pm
Forum: RouterBOARD hardware
Topic: 0_о
Replies: 6
Views: 931

Re: 0_о

Keep in mind that "Width" is in blue on Quick set so it was not applied yet. I see nothing wrong on the screenshot.
by Kliwer
Tue Jun 05, 2018 9:04 am
Forum: RouterOS v6 RC and v7 BETA
Topic: [Feature Request] Disable dynamic entries
Replies: 0
Views: 311

[Feature Request] Disable dynamic entries

Hi. It would be nice if it was possible to disable dynamic entries in queues, bridge ports and address list. Sometimes I need to disable queue for a client connected by pppoe by radius to test his throughput - right now I have to delete queue and after testing I need to disconnect pppoe so it connec...
by Kliwer
Mon Jun 04, 2018 4:08 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 109541

Re: v6.43rc [release candidate] is released!

!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
So where is new Windows Bandwidth Test app?
by Kliwer
Thu Feb 22, 2018 11:56 am
Forum: Wireless Networking
Topic: SXTsq G5acD max real throughput?
Replies: 12
Views: 1926

Re: SXTsq G5acD max real throughput?

Less than 2m.
by Kliwer
Thu Feb 22, 2018 10:14 am
Forum: Wireless Networking
Topic: SXTsq G5acD max real throughput?
Replies: 12
Views: 1926

Re: SXTsq G5acD max real throughput?

My tests from yesterday (80MHz, room test, iperf3 tcp, 6.42rc30) 1. nstreme - stable 180Mbps - it seems it's max for nstreme regardless of device 2. nv2 - unstable, max that I seen was about 300Mbps 3. any - unstable too, max that I seen was about 550Mbps It looks that MT is on a good road, but stil...
by Kliwer
Fri Apr 29, 2016 11:39 am
Forum: Forwarding Protocols
Topic: Hairpin NAT, no bridge, few routers
Replies: 0
Views: 573

Hairpin NAT, no bridge, few routers

Hi. I have a network like in the attached file. Between each router there is ospf configured, no bridge at all. SERVER has only internal IP assigned on interface, its public IP is assigned bys src/dst-nat on MT1. I want to access SERVER by its Public IP from PPPoE Client. I know I need Hairpin Nat b...
by Kliwer
Wed Aug 12, 2015 11:06 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 419
Views: 139559

Re: Tik App, MikroTik android utility ALPHA test

RB SXT G-5HPnD r2
Menu->Wireless = crash

Thank you, this will be very useful app.
by Kliwer
Mon Apr 20, 2015 11:09 am
Forum: RouterOS v6 RC and v7 BETA
Topic: RouterOS 6.27 Bug - address-list find not working
Replies: 2
Views: 988

Re: RouterOS 6.27 Bug - address-list find not working

I tried using both commands in terminal - didn't work. Find returns nothing. Remove works, yeah, but right after it removes, entry that was removed is added again. When I remove entry 0 and then check with Print then this entry is at the end of the list with new index.
by Kliwer
Sun Apr 19, 2015 10:13 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: RouterOS 6.27 Bug - address-list find not working
Replies: 2
Views: 988

RouterOS 6.27 Bug - address-list find not working

Hi, after upgrading to 6.27 my scripts broke. I am using: /ip firewall address-list find list=komunikat in my script and it is no longer working. On another router with 6.7 it works fine. Running this command in terminal is not working either. There is one more bug with address-list: when I try to r...
by Kliwer
Sun Feb 15, 2015 1:58 pm
Forum: General
Topic: How to force traffic from A to B via C
Replies: 0
Views: 428

How to force traffic from A to B via C

Hi. I have situation like this: ...........A C---D< ...........B C has the internet access. Right now, A wants to access http://www.google.com and C redirects it to B. Then A clicks "Go back" button on the page that will redirect it back to the internet. Doing so adds A's IP do an address list on C ...
by Kliwer
Fri May 02, 2014 8:44 am
Forum: General
Topic: Firewall->Filter Rules Dst-Address is being ignored
Replies: 5
Views: 831

Re: Firewall->Filter Rules Dst-Address is being ignored

RouterOS 5.26 but I also checked with 6.7(on another MT) WAN is PPPoE client on ether1. On this MT there are PPPoE Server and MetaROUTER with web server. 192.168.120.250 is an address of MetaROUTER. PPPoE Server is running on BRIDGE which consists of wlan1 and vif1. I used torch on pppoe interface o...
by Kliwer
Fri May 02, 2014 12:31 am
Forum: General
Topic: Firewall->Filter Rules Dst-Address is being ignored
Replies: 5
Views: 831

Re: Firewall->Filter Rules Dst-Address is being ignored

That's what I want to achieve but it is not working.
by Kliwer
Thu May 01, 2014 6:58 pm
Forum: General
Topic: Firewall->Filter Rules Dst-Address is being ignored
Replies: 5
Views: 831

Firewall->Filter Rules Dst-Address is being ignored

Hello. I have a rule: 0 X chain=forward action=add-src-to-address-list protocol=tcp dst-address=192.168.120.250 src-address-list=test address-list=test2 address-list-timeout=1h dst-port=80 By my understanding it should work like this: When there is traffic to address 192.168.120.250 on port 80 add s...
by Kliwer
Thu May 01, 2014 5:34 pm
Forum: General
Topic: How to redirect to Hotspot login page
Replies: 5
Views: 1746

Re: How to redirect to Hotspot login page

That's not it. I don't want to use external login page. I have simle dst-nat rule in firewall to redirect user to some page, currently external. What I want to know is what I need to write in address and port in that dst-nat rule to be redirected to hotspot login page.
by Kliwer
Wed Apr 30, 2014 5:34 pm
Forum: General
Topic: How to redirect to Hotspot login page
Replies: 5
Views: 1746

Re: How to redirect to Hotspot login page

Thanks, but it's not what I am looking for. Well, to put it simply I want mini web server on MT. I need to display one simple page for a set of IPs. I guess I can't create a new html file. The main question is how can I redirect to hotspot login page using firewall rule. I think that the login page ...
by Kliwer
Tue Apr 29, 2014 9:37 pm
Forum: Beginner Basics
Topic: How to redirect to hotspot login page
Replies: 0
Views: 363

How to redirect to hotspot login page

Hey. How can I redirect user to hotspot login page using firewall rule? When using MT address it redirects me to webbox login page. When using the same address in browser it shows hotspot login page. Anyone knows?

Regards
by Kliwer
Tue Apr 29, 2014 9:28 pm
Forum: General
Topic: How to redirect to Hotspot login page
Replies: 5
Views: 1746

How to redirect to Hotspot login page

Hey. I modified hotspot login page to show just a message to the client. My question is how can I redirect user to this page using firewall rule? When I use MT address with port 80 it redirects me to webbox login page but when I use the same address in browser it shows my hotspot login page. Btw. is...