Community discussions

Search found 22 matches

by ATG
Fri Feb 23, 2018 1:02 pm
Forum: RouterBOARD hardware
Topic: HAP AC random reboots
Replies: 3
Views: 928

Re: HAP AC random reboots

I would try to swapping out the power supply\adapter, just to eliminate this.
by ATG
Mon Nov 23, 2015 11:06 am
Forum: RouterBOARD hardware
Topic: CCR IPSec performance
Replies: 40
Views: 15454

Re: CCR IPSec performance

It may be that the CCR in my setup, would have preformed better with GRE instead of EoIP, have not tested.

Alternatily, if I had added serveral connections over the same tunnel, I also think througput would improve.
by ATG
Sun Nov 22, 2015 7:05 pm
Forum: RouterBOARD hardware
Topic: CCR IPSec performance
Replies: 40
Views: 15454

Re: CCR IPSec performance

Hello I have a couple of CCR1009, each on their seperate location. Both with WAN 150/150Mbit Fiber. I have a IPSec with EoIP tunnel between the CCR's, running the latest 6.33.1 with latest firmware. When I try to push rsync backup, routed between these unit, it maxes out on around 50Mbit over EoIP o...
by ATG
Wed Jul 29, 2015 1:31 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ fans not work?
Replies: 3
Views: 1069

Re: CCR1009-8G-1S-1S+ fans not work?

Hi, I see the same on one of my CCR's. O

I think the reason is that the fan(s) are temperature controlled, and your temperature is to low for the fan to start. I see that as soon the cpu temperature is around 53-55 degees the fan seem to start on my device.

Regards
ATG
by ATG
Wed Jul 29, 2015 11:00 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47469

Re: RB850Gx2 - HW Encryption

Latest Mikrotik news 66 states that RB850Gx2 devices will now start shipping with HW encryption accelrated CPU. And 500Mbps AES througput should be achievable, sound like great news! :)
by ATG
Fri Jul 10, 2015 9:59 am
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 50988

Re: RB3011 Block diagram?

Yes, however this is a forum and a block diagram would be a bit more official and specific. Since this is such an interesting product, I am eagerly and impatient… :)
by ATG
Wed Jul 08, 2015 1:01 pm
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 50988

Re: RB3011 Block diagram?

Is there a block diagram available for RB3011?
by ATG
Wed Feb 25, 2015 10:18 am
Forum: RouterBOARD hardware
Topic: SFP-10G-LR Doesn't work on CRS
Replies: 4
Views: 1801

Re: SFP-10G-LR Doesn't work on CRS

Hello, I am currently using a SFP-10G-LR in a CRS226, linked toward a CCR. This setup has worked fine the last 6-8months. The SFP+ is a Fiberworks module, but is Cisco coded(was originally supposed to be used in a Catalyst 4500-e switch), but works fine with all Mikrotiks I have tested it with. Rega...
by ATG
Tue Nov 04, 2014 3:36 pm
Forum: RouterBOARD hardware
Topic: How to migrate from RG493G to CRS125-24G-1S-2HnD-IN?
Replies: 3
Views: 979

Re: How to migrate from RG493G to CRS125-24G-1S-2HnD-IN?

I usually export the running configuration to a file: - Log into terminal on your exisiting device - Run the command export file=config.cfg - Copy the config.cfg file to your computer(drag and drop from winbox) - Open the file on your computer - Past the configuration lines you want into the termina...
by ATG
Thu Oct 23, 2014 1:58 pm
Forum: General
Topic: GRE over IPSEC, CCR, VERY SLOW
Replies: 39
Views: 15713

Re: GRE over IPSEC, CCR, VERY SLOW

Hello, I just did a test now EoIP(encrypted IPSec 3des), both sites running running CCR-1009-8G-1S-1S+ v6.20, 3.19 firmware. Seems that only one CPU core handles the traffic(100% on one core, 0% on the rest), top speed over the EoIP tunnel maxes out on approx 43Mbps... Will this get sorted out? Or w...
by ATG
Mon Oct 13, 2014 4:01 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ SFP question
Replies: 2
Views: 843

Re: CCR1009-8G-1S-1S+ SFP question

Hi,

I'm using CCR1009-8G-1S-1S+ with a pair of Cisco GLC-T 1000BASE-T SFP transceiver modules, works great. Gives me 2 addtional RJ45 gbit ports ;) On a secondary site om using GLC-LX modules, also works.

So I would say yes, the SFP+ port supports the 'only SFP' transcievers.

Regards
by ATG
Sun Oct 12, 2014 11:37 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 Network interface details
Replies: 36
Views: 19622

Re: RB850Gx2 Network interface details

What does this actually mean to real life performance? What are the downsides of having a L2 MTU of 1506?
by ATG
Tue Oct 07, 2014 9:40 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47469

Re: RB850Gx2 - Release date?

I'm considering placing this at multiple locations(remote offices), and establishing IPsec site-to-site to the HQ CCR's. Do this offer AES hw encryption?

Is it possible for you do a IPsec pass through test(1518byte, AES-256) and report back som numbers?

Keep up the good work :)
Best Regards
by ATG
Mon Oct 06, 2014 2:44 pm
Forum: RouterBOARD hardware
Topic: RB850Gx2 - Release date?
Replies: 193
Views: 47469

Re: RB850Gx2 - Release date?

I am extremely curious about how this unit performs in terms of VPN(IPSEC). I guess it will handle most home connections in terms of NAT. However most routers are not able to saturate connectons over IPsec, but I hope this little bad boy does :) I would love if somebody can pressent some VPN perform...
by ATG
Mon Aug 11, 2014 10:11 am
Forum: RouterBOARD hardware
Topic: SFP module on SFP+ cage
Replies: 3
Views: 1233

Re: SFP module on SFP+ cage

I confirm that this works. I am currently using a CCR1009-8G-1S-1S+, with 2x Cisco SFP 1000Mbit(RJ45), so I get 2 additional ports :)
by ATG
Mon Jun 23, 2014 3:01 pm
Forum: RouterBOARD hardware
Topic: Finally RB953GS-5HnT is available!
Replies: 12
Views: 3900

Re: Finally RB953GS-5HnT is available!

Any tests or indication of what the IPSEC AES-128 througput will be on this unit? Using 433AH today, and we get roughtly around 20-25Mbits throug ipsec. But the last cuple of months we have upgraded our sites, and I am now looking to get higher speeds(40-75Mbit) over IPSEC. Considering to use RB953G...
by ATG
Wed May 28, 2014 9:38 am
Forum: RouterBOARD hardware
Topic: Which SFP in a RB2011 to this Media Converter?
Replies: 4
Views: 1857

Re: Which SFP in a RB2011 to this Media Converter?

Will Mikrotik support 100Mbit SFPs in the future?
by ATG
Wed May 21, 2014 9:44 am
Forum: RouterBOARD hardware
Topic: CCR-1036-12G-4S and 1000T SFPs
Replies: 5
Views: 1426

Re: CCR-1036-12G-4S and 1000T SFPs

I have a CCR1009, and im using 1000BaseT adapters in both the SFP+ and SFP port. Works great!

The type I use is a Fiberworks GLC-T. And its essentially uoriginal SFP, thats programmet to work with Cisco switches. (on Ciscos 3750 switches it shows up as a original Cisco SFP).

Regards
ATG
by ATG
Fri May 16, 2014 9:00 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ General info & Questions
Replies: 100
Views: 68942

Re: CCR1009-8G-1S-1S+ General info & Questions

This also happends to me, on both SFP+ and the SFP port, with all the modules I have tested.

However I'm not sure if matters or affects the CCR, can't say that I have encountered any strange behavior other that the sound itself. Maybe just a voltage drop, that gets readjusted after a while?
by ATG
Tue May 13, 2014 2:15 pm
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ General info & Questions
Replies: 100
Views: 68942

Re: CCR1009-8G-1S-1S+ General info & Questions

I've had this CCR1009-8G-1S-1S+ in use for a week now with 6.12, and so far so good :) However my WAN uplink(15dB TX 1310\RX 1550) for Internet and IPTV is currently run throug a fiber converter (10/100/1000FD BiDI -> 10/100/1000Base-T) before it is connected to my CCR. I have tested 2 SFP's, one mi...
by ATG
Fri Feb 21, 2014 10:57 am
Forum: RouterBOARD hardware
Topic: CRS226
Replies: 33
Views: 10344

Re: CRS226

PPC CPU? HW Encryption?

This looks like ideal product for our remote offices! :)
by ATG
Fri Feb 21, 2014 9:48 am
Forum: RouterBOARD hardware
Topic: CRS226
Replies: 33
Views: 10344

Re: CRS226

Sound promising!

What CPU and speed is used? (Fanless?)

Best Regards
Joakim