MikroTik

AUsquirrel

---SNIP---- Ok, I emailed the supout and put your name in the body of the email. I did not receive a ticket number or any email response. Edit: It just replied the ticket number. SUP-125522 This is easily reproducible. Just create a bridge, a trunk port and an access port. Leave HW enabled, enable ...

AUsquirrel

Upgraded 2 x 5009, 2 x cAP, 1 x mAP and 1 x cAP ax. I have had the issue reported by AdB and eworm that my 5009 running my capsman is "dropping" the VLANs for any VLAN edge ports on the 5009. This includes the management vlan that then drops the wireless networks. The rest are working fin...

AUsquirrel

Upgraded 2 x 5009, 2 x cAP, 1 x mAP and 1 x cAP ax. I have had the issue reported by AdB and eworm that my 5009 running my capsman is "dropping" the VLANs for any VLAN edge ports on the 5009. This includes the management vlan that then drops the wireless networks. The rest are working fine.

AUsquirrel

Good question. I haven't found anything in the documentation either. Based on setting the value and changing a password, I have the generated the following table. 0 = no complexity requirements as you can use digits, lower and upper case letters, symbols 1 = no complexity requirement, same as zero. ...

AUsquirrel

I had a very similar issue with 7.9.2 IIRC and following the update to 7.10.1 and .2 it resolved. What version of RouterOS are you on?

AUsquirrel

Thanks hjoer, this information help me solve this exact issue.

AUsquirrel

Thanks antonsb. That is great news.

next beta will have ipv6 support for veth:
Code: Select all
add address=172.17.0.3/16,fd8d:5ad2:24:2::2/64 gateway=172.17.0.1 gateway6=fd8d:5ad2:24:2::1
as well as multiple addresses

I just hope it makes it into 7.11.

AUsquirrel

@rextended Would you revive this for me, please? It doesn't work correctly anymore. :local arrMonths {jan="01";feb="02";mar="03";apr="04";may="05";jun="06";jul="07";aug="08";sep="09";oct="10";nov=&qu...

AUsquirrel

Upgrade was successful.

Now have a suspected bug in the IPV6 filter rule that has a source IPV6 address list and an IPV6 address range. It is going past the rule to the drop and log rule. Tried with various combinations and no luck.

Both networks are VLANs

AUsquirrel

For Dude 7.9.2 as a regular user account on a windows box, you need to give the users modify and write permissions to the C:\Program Files (x86)\Dude\data directory.

I also logged in to the workstation as an admin and configured the auto connect details.

AUsquirrel

I also have seen the same issue with container 0.

AUsquirrel

The last RouterOS v6 (long-term) was released nearly a year ago. Is Mikrotik going to release a newer RouterOS v6 (long-term) version? Zero-Day Initiative: SUCCESS - DEVCORE becomes the first team ever to successfully execute two different Stack-based buffer overflow attacks against a Mikrotik rout...

AUsquirrel

Thanks guys.

I have added an address to the bridge and was able to static the docker address as well so I guess the answer is yes but not in Winbox directly.

AUsquirrel

Hi Everyone, Do you know if you can dual stack (IPV4 and IPV6) veth interfaces or if they support IPV6? I tried to create one with an IPV6 address and it gave me "Error in Address - address expected" in winbox and an "invalid or unexpected argument base" from the command line so ...

AUsquirrel

+1 as well

AUsquirrel

The problem IS NOT DUDE:
viewtopic.php?t=186567#p938935

Hi rexended,
I had a browse through the .npk package to locate the file you mentioned, where in the package should it exist? I didn't find an internal system description file.

AUsquirrel

Same here.

I have placed the packages on my dude server in the /dude/files directory on my router that is the dude server.
They are visible in the dude via the client in the Content - Files under files All and in the packages tab.
Still get the error "needed packages are not available

AUsquirrel

As a RB3011 user with an SFP for uplink to my RB260GSP I am glad I held off installing yet another 'STABLE' release :(

Unfortunately I tried the upgrade before the warning was released. Had to reset, downgrade then I restored from the backup I made before the upgrade.
Waiting now for V7.3.1 :-)

AUsquirrel

Hi Everyone, I have a really strange network problem that I have run out of ideas to fault find so am asking for suggestions. I have a dude server and it can't communicate with one of my other routers. I have been investigating it and found some interesting results when using ping and traceroute to ...

AUsquirrel

Upgraded OK.
RB750Gr3
RB3011
mAP
cAP AC x 2

No problems except the RB3011 that since 7.1.3 now always needs to have the backup restored for IPV6 to work. Everything else works fine.

AUsquirrel

+1 Trying to debug an IPV6 issue and without torch it is making life harder.

AUsquirrel

Upgrade went OK. IPV4 is ok. IPV6 network stopped working. I suspect that one of the fixes has impacted my firewall rules. Cause of that is often the incorrect configuration following an often copied advice. When both PPPoE and DHCPv6 are used and both have "add default route" checkmark e...

AUsquirrel

Upgrade went OK. IPV4 is ok. IPV6 network stopped working. I suspect that one of the fixes has impacted my firewall rules. The upgrade did drop an OSPF router id on one of my routers.
Re-entered the ID and it dropped straight back in.

AUsquirrel

I got mine working by adding the ospf multicast address 224.0.0.5/32 to my wireguard link.

AUsquirrel

+1 here as well

AUsquirrel

Thank you!

+

AUsquirrel

Same issue here on a Win 10 21H2 box.

AUsquirrel

Hi sindy,
Thanks for that post. IT explains a couple of things I have been trying to understand as to how it works. I will try the all the changes you have suggested and let you know how I go when I get back from my holidays this week.

AUsquirrel

If have now added a one to one nat for the address and web browsing appears to be working.

Thanks sindy, tdw and martinclaro for your help.

AUsquirrel

Hi Everyone, Thank you for your help so far. Just to let you all know where I am up to, here is an update. After a hectic week when I was unable to take the link off line, I grabbed an old CISCO 2600 router and threw a base config on it to test. With this config, I was able to achieve a ping on the ...

AUsquirrel

Hi Sindy,
Thanks for that. I will try it tonight and let you know the results.

AUsquirrel

Hi Sindy, Thanks for your reply. It has given me some more information. My primary one is linked by what is call an Access Virtual Circuit to create a virtual link to my house from my ISP. That link terminates in an RJ45 Ethernet connector on the NBN Customer Premises Equipment (CPE). Your point abo...

AUsquirrel

Hi Martinclaro, Thanks for the tips. I read the link and will now check the rfc and the dhcp parts of the manual to see if I can find something. Hi Tdw, In Australia we have what is officially know as the National Broadband Network (NBN), or as most people refer to it Not a Bl**dy Network. It provid...

AUsquirrel

Hi, Has anyone successfully implemented a dual IP WAN connection as a client on a Router OS device using Framed Routes? In Australia, my ISP has provided a second IPV4 address and provisioned it using what they term, a Framed Route. I assume that this using RADIUS attribute 22. I found nothing in th...

AUsquirrel

I read the posts and then removed and recreated the connections and after checking all the passwords were the same, it worked.

Thanks for the help.

AUsquirrel

Thanks pe1chl and sindy for your suggestions. I have read both articles and will try them out and let you know how I go.

AUsquirrel

Hi Everyone, I have been attempting to configure the LT2P IPSEC tunnel and am getting it to connect. Unfortunately, it then immediately disconnects. Can someone have a look at the log file below and let me know which line indicates the reason for this behavior? From what I can see, the test user suc...

AUsquirrel

Hi IPANetEngineer, Thank you for replying and I enjoyed reading your WISP design. To answer your question, they are netmasked as /64. > ipv6 address print Flags: X - disabled, I - invalid, D - dynamic, G - global, L - link-local # ADDRESS FROM-POOL INTERFACE ADVERTISE 0 G 2001:44b8:2159:cf01::1/64 e...

AUsquirrel

Hi Everyone, I have managed to get my Mikrotik working with internode but am unable to get both the IPV6 address and prefix both working the way they should according to most examples and the documentation. My config is: > ipv6 export # jan/20/2020 19:00:22 by RouterOS 6.45.7 # software id = NJXX-WV...

AUsquirrel

Have you configured the ISP connection port as a DHCP client? My ISP connects to my CISCO router and assigns it an address. It also pushes the default route to it. I have UDP 546 open on the internet to accept the DHCP requests and the autoconfig. I then set the default route to that interface. The ...

AUsquirrel

Please post the results of 'ipv6 route print'

AUsquirrel

How about setting up VPN's from those houses to your router then allowing the packets to access the PBX? All other solutions I can think of will require the networks outside your network access to pass their IP addresses. Not a good security feature.

AUsquirrel

Hi all, I have recently bought a 750G routerboard to link my DMZ IPV6 network to the internal one. I have a /48 subnet and run two networks. The first is my DMZ and the second my internal network. The aim is to use the 750G as the firewall router between the two. I have been able to set the static I...

Search found 43 matches