Community discussions

MikroTik App

Search found 104 matches

by mfrabbibd
Thu Aug 13, 2020 10:33 pm
Forum: General
Topic: CCR1016-12S-1S+ 10G port doesn’t work with RJ45 SFP Coper Module.
Replies: 1
Views: 229

CCR1016-12S-1S+ 10G port doesn’t work with RJ45 SFP Coper Module.

Hi MikroTik Experts, I just bought a CCR1016-12S-1S+ but it’s 10G port doesn’t work with RJ45 SFP Coper Module comes with it. I disabled auto negotiations & set it to 1G but no luck. Is it manufacture defect or 10G port doesn’t work with 1G sfp module on this specific CCR? Please suggest me should I...
by mfrabbibd
Wed Aug 12, 2020 1:24 pm
Forum: RouterBOARD hardware
Topic: Mikrotik CCR2004 B/W Capacity
Replies: 6
Views: 1400

Re: Mikrotik CCR2004 B/W Capacity

Thank you all for your comment, if I buy CCR 1016 12s 1S+ instead of CCR 2004 will it be a better idea or not?
Regards


Sent from my iPhone using Tapatalk
by mfrabbibd
Tue Aug 11, 2020 9:39 pm
Forum: RouterBOARD hardware
Topic: Mikrotik CCR2004 B/W Capacity
Replies: 6
Views: 1400

Mikrotik CCR2004 B/W Capacity

Hi all, currently I’m using CCR 1009 7G 1S 1S+ as my PPPoE Server with 4 Firewall Nat rules & 15 PCQ’s. Total B/W 600Mbps, PPPoE client 400. CPU uses 40-45% all the time. I want to upgrade to New CCR 2004. Is it a good decision? Can I assume cpu load would be around 20% Max with CCR 2004? Please sug...
by mfrabbibd
Thu May 28, 2020 8:48 pm
Forum: General
Topic: Could not login to Mikrotik Routers through Winbox suddenly.
Replies: 3
Views: 763

Re: Could not login to Mikrotik Routers through Winbox suddenly.

Thanks for your reply. If I restart my routers I can login for a while but when traffic passing started I can't login again.

Sent from my Redmi Note 8 using Tapatalk

by mfrabbibd
Thu May 28, 2020 7:00 pm
Forum: General
Topic: Could not login to Mikrotik Routers through Winbox suddenly.
Replies: 3
Views: 763

Could not login to Mikrotik Routers through Winbox suddenly.

Hi, can anyone help me regarding the issue, I've been using Mikrotik Routers & Winbox for 5 years. Suddenly from last few days I could not login to my routers through Winbox. Router OS v6.39.3 & Winbox v3.18. please help me to solve the issue. Thanks in advance. Sent from my Redmi Note 8 using Tapat...
by mfrabbibd
Mon Jul 29, 2019 7:20 am
Forum: General
Topic: PPPoE Client as main Link 3G as Backup
Replies: 1
Views: 468

PPPoE Client as main Link 3G as Backup

Dear All, I need your kind help on regarding configuration. I've PPPoE Broadband Connection as my main internet source and 3G Dongle as Backup Link. I've Mikrotik hEX to do this configuration. When Broadband PPPoE Link is active then It should work as Primary Link but when PPPoE goes down then 3G wi...
by mfrabbibd
Fri Feb 22, 2019 5:18 pm
Forum: General
Topic: CRS106-1c-5s Throughput
Replies: 3
Views: 752

Re: CRS106-1c-5s Throughput

Hi Normis, Someone told me if I use it with bridge functionality then CPU goes 100% at 70Mbps data transferring. Correct me if I’m wrong.


Sent from my iPhone using Tapatalk
by mfrabbibd
Fri Feb 15, 2019 3:12 pm
Forum: General
Topic: CRS106-1c-5s Throughput
Replies: 3
Views: 752

CRS106-1c-5s Throughput

Hello guys, Can anyone please give me some info about crs106-1c-5s throughput? As it is running on Router OS not SWOS what will be the maximum through put if i use it as normal sfp switch.

Regards,
by mfrabbibd
Tue Feb 12, 2019 9:41 pm
Forum: RouterBOARD hardware
Topic: CRS 106-1c-5s Capacity as SFP switch
Replies: 0
Views: 594

CRS 106-1c-5s Capacity as SFP switch

Hi, I need some advice from you guys. Can I use CRS 106-1c-5s as Simple SFP switch? I want to use SFP1 as 1G uplink and another four SFP port as Downlink. In that case can I get roughly 250Mbps on each 4port of SFP that I use for downlink? I came to know as it uses ros that’s why CPU goes 100% when ...
by mfrabbibd
Fri Mar 09, 2018 2:12 pm
Forum: General
Topic: Need help for that configuration..
Replies: 13
Views: 1681

Re: Need help for that configuration..

To my opinion, WDS system only makes sense if you have no possibility to connect the APs to the rest of the network using cables. The price you pay is that the AP connected using WDS has to receive a packet from the client and re-send it to the next AP in the chain, so the available bandwidth falls...
by mfrabbibd
Thu Mar 08, 2018 4:05 pm
Forum: General
Topic: Need help for that configuration..
Replies: 13
Views: 1681

Re: Need help for that configuration..

wds gives you a mobility connection , wireless cloud , stability user up time in all area of wireless network if you dont want play with WDS you can set similar config in each access point and user seeing one ssid So according to your concept, I should not connect all ap’s through lan cable to the ...
by mfrabbibd
Thu Mar 08, 2018 5:19 am
Forum: General
Topic: Need help for that configuration..
Replies: 13
Views: 1681

Re: Need help for that configuration..

hi mikrotik man yeah this is posible right now with a beautiful feature that called WDS on wireless you connect 4 APs together and replicate with each other and you see one ssid actully right now or you can use a capsman feature on routeros there are two way ,depend on you which way you like do goo...
by mfrabbibd
Wed Mar 07, 2018 6:54 pm
Forum: General
Topic: Need help for that configuration..
Replies: 13
Views: 1681

Re: Need help for that configuration..

hi mikrotik man yeah this is posible right now with a beautiful feature that called WDS on wireless you connect 4 APs together and replicate with each other and you see one ssid actully right now or you can use a capsman feature on routeros there are two way ,depend on you which way you like do goo...
by mfrabbibd
Wed Mar 07, 2018 6:32 pm
Forum: General
Topic: Need help for that configuration..
Replies: 13
Views: 1681

Re: Need help for that configuration..

hi mikrotik man yeah this is posible right now with a beautiful feature that called WDS on wireless you connect 4 APs together and replicate with each other and you see one ssid actully right now or you can use a capsman feature on routeros there are two way ,depend on you which way you like do goo...
by mfrabbibd
Wed Mar 07, 2018 11:17 am
Forum: General
Topic: Need help for that configuration..
Replies: 13
Views: 1681

Re: Need help for that configuration..

Anyone???


Sent from my iPhone using Tapatalk
by mfrabbibd
Wed Mar 07, 2018 6:06 am
Forum: General
Topic: Need help for that configuration..
Replies: 13
Views: 1681

Need help for that configuration..

Hi, Dear Mikrotik guys, I need to implement this setup. Please guide me the right solutions. I'm getteing internet from CCR 1009 Series Router's (ether2)Lan Port. It's a hotspot server. Ether2 is connected to a 24port switch. I also have 4 RB951Ui2Hnd all connected to the switch. all I want a Single...
by mfrabbibd
Mon Jul 31, 2017 11:58 am
Forum: General
Topic: SYSTEM LOG SERVER FOR PPPoE User's Details
Replies: 0
Views: 552

SYSTEM LOG SERVER FOR PPPoE User's Details

Dear Mikrotik Expert,
Can anyone please help me providing any guide or tutorial regarding free remote Syslog Server for PPPoE user's details monitoring like IP,MAC, Visiting sites, Visiting Time/Date/Hour etc.
Thanks for reading
regards...
by mfrabbibd
Sun Jun 18, 2017 5:49 pm
Forum: Wireless Networking
Topic: How to Increase Download Speed and decrease upload of Netmetal5
Replies: 3
Views: 729

Re: How to Increase Download Speed and decrease upload of Netmetal5

Hi mistry7, I'm from Bangladesh. As far I know the max EIRP is allowed 44db here. Yes I've tested plane 802.11 but no luck. NV2 is stable for me not also Nstream. What do you mean by "enable fast forward for your bridges"?? Would you please describe in details or a demo?

Regards,
by mfrabbibd
Fri Jun 16, 2017 8:34 pm
Forum: Wireless Networking
Topic: How to Increase Download Speed and decrease upload of Netmetal5
Replies: 3
Views: 729

How to Increase Download Speed and decrease upload of Netmetal5

Hello Dear Mikrotik Friends, I’ve a PTP link Backbone with Netmetal5 & Mikrotik mANT30 PA Dish at the distance of 11.4Km. Protocol NV2, Chanel Width 80Mhz. I’ve given some Screen Shoot of my configuration. Is it ok? Running for more than 3months without any issue. AP is on my side and the Station is...
by mfrabbibd
Thu Jun 08, 2017 11:06 pm
Forum: General
Topic: PPPOE Web Proxy Log Server on Raspberry pi
Replies: 1
Views: 681

PPPOE Web Proxy Log Server on Raspberry pi

Hi all, can anyone please tell me is it possible to save web proxy logs of Mikrotik PPPoE client on Raspberry pi? We need to store all of my PPPoE clients web browsing history with ip & MAC address with date&time. If anyone knows, please guide me to do this. Thanks
by mfrabbibd
Tue Jun 06, 2017 7:43 am
Forum: General
Topic: PPPoE & Hotspot Server on the same interface with usermamager.
Replies: 4
Views: 1180

Re: PPPoE & Hotspot Server on the same interface with usermamager.

Hello friends, need expert advice on my setup. I want to create PPPoE & Hotspot Server with usermanager on the same interface on CCR1009 router. PPPoE clients will be manage via winbox locally but Hotspot Server will be maintained by usermanager. Is it safe to do that setup? There will be two diffe...
by mfrabbibd
Tue Jun 06, 2017 6:29 am
Forum: General
Topic: PPPoE & Hotspot Server on the same interface with usermamager.
Replies: 4
Views: 1180

Re: PPPoE & Hotspot Server on the same interface with usermamager.

Anyone please update me?


Sent from my iPhone using Tapatalk
by mfrabbibd
Mon Jun 05, 2017 9:37 pm
Forum: General
Topic: PPPoE & Hotspot Server on the same interface with usermamager.
Replies: 4
Views: 1180

PPPoE & Hotspot Server on the same interface with usermamager.

Hello friends, need expert advice on my setup. I want to create PPPoE & Hotspot Server with usermanager on the same interface on CCR1009 router. PPPoE clients will be manage via winbox locally but Hotspot Server will be maintained by usermanager. Is it safe to do that setup? There will be two differ...
by mfrabbibd
Mon Jun 05, 2017 9:25 am
Forum: RouterBOARD hardware
Topic: CCR 1009-7G-1C-1S+ is safe powering on PoE
Replies: 4
Views: 1130

Re: CCR 1009-7G-1C-1S+ is safe powering on PoE

Would you please illustrate a bit on this? Because PoE port draw little amount of current n will it be sufficient for CCR?
Regards
by mfrabbibd
Mon Jun 05, 2017 8:31 am
Forum: RouterBOARD hardware
Topic: CCR 1009-7G-1C-1S+ is safe powering on PoE
Replies: 4
Views: 1130

CCR 1009-7G-1C-1S+ is safe powering on PoE

Dear Friends, Is it safe to power Mikrotik CCR 1009-7G-1C-1S+ on PoE. I want to use Mikrotik GPoE Injector with 24v 90Amp Battery to power it.

Waiting for your recommendation. Thanks for reading.
Regards,
by mfrabbibd
Sat Jun 03, 2017 5:31 am
Forum: General
Topic: Need Solution for that design
Replies: 11
Views: 1626

Re: Need Solution for that design

Thanks a lot Discmandj, can I get your social networking invitation to chat with you for a while? it was so kind of you. The ip's r demo. I've a question, RB260gsp only works through web browser not winbox so how should I put command for RB260gsp?
Thanks
by mfrabbibd
Fri Jun 02, 2017 10:11 pm
Forum: General
Topic: Need Solution for that design
Replies: 11
Views: 1626

Re: Need Solution for that design

Dear Discmandj, are you doing something for me! Need your help.
Regards
by mfrabbibd
Fri Jun 02, 2017 6:37 pm
Forum: General
Topic: Need Solution for that design
Replies: 11
Views: 1626

Re: Need Solution for that design

Dear Discmandj, should I create 2 vlan on 1st rb260gsp and do the same 2vlan on 2nd RB260gsp as well? Don't understand what to do! it would be so kind of you if you help by giving the whole configuration! I badly need this solution but couldn't find any clue on the web or I don't have any idea what ...
by mfrabbibd
Fri Jun 02, 2017 5:25 am
Forum: General
Topic: Need Solution for that design
Replies: 11
Views: 1626

Re: Need Solution for that design

Thanks for your response. RB260gsp is already a switch and in bridge mood by default. How do I saperate two public ip on the second RB260gsp?
by mfrabbibd
Thu Jun 01, 2017 10:35 pm
Forum: General
Topic: Need Solution for that design
Replies: 11
Views: 1626

Re: Need Solution for that design

Any updates....!
by mfrabbibd
Thu Jun 01, 2017 2:57 pm
Forum: General
Topic: Need Solution for that design
Replies: 11
Views: 1626

Need Solution for that design

Dear Mikrotik Experts, I need your help to design this kind of setup. I’ve a 20Km Single Core Fiber Optical Transmission. I’ve taken 2 ISP’s connection which are respectively ISP-1 (WAN1) - 180.161.159.157/30 (30Mbps) & ISP-2 (WAN2)- 182.211.157.166/30 (20Mbps). Now I have RB260GSP Mikrotik Switch o...
by mfrabbibd
Mon May 15, 2017 12:34 am
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 172
Views: 34700

Re: Which types of ports would you like to see for a high speed router

The advantage of specifically manufactured hardware is that manufacture can test it at the specific configuration. If you take that away, is becomes the same as any other PC where you have no driver support.
Normis, every RM Router Should have a DC power option!


Sent from my iPhone using Tapatalk
by mfrabbibd
Wed Apr 26, 2017 7:07 pm
Forum: General
Topic: Public IP for specific PPPoE Client?
Replies: 2
Views: 1084

Re: Public IP for specific PPPoE Client?

Actually I'm new on this. Can you please give me a demo or easy reference that I can understand?


Sent from my iPhone using Tapatalk
by mfrabbibd
Tue Apr 25, 2017 5:56 pm
Forum: General
Topic: Public IP for specific PPPoE Client?
Replies: 2
Views: 1084

Public IP for specific PPPoE Client?

Dear Experts, My ISP has given me 33.221.31.119/29 (Sample) series Public IP and I think I can use 5 public ip's from them. ether1 is my WAN & ether2 is lan side. I made PPPoE server on lan (IP-192.168.1.1/24), PPPoE Pool 192.168.1.2-192.168.1.254. Now I want to provide a public IP for one of my PPP...
by mfrabbibd
Fri Apr 14, 2017 5:52 am
Forum: Wireless Networking
Topic: Accessing Netmetal 5 (for ptp connectivity) behind CCR!
Replies: 4
Views: 872

Re: Accessing Netmetal 5 (for ptp connectivity) behind CCR!

Access ccr using mac and winbox . Check if netmetal is in ip- neighbours terminal then mac-telnet into that router setup ospf in both routers then you will be able to access both from winbox with router static ip Sent from my SM-G900F using Tapatalk Hi dear friend, can you please describe bit more!...
by mfrabbibd
Wed Apr 12, 2017 10:50 pm
Forum: Wireless Networking
Topic: Accessing Netmetal 5 (for ptp connectivity) behind CCR!
Replies: 4
Views: 872

Accessing Netmetal 5 (for ptp connectivity) behind CCR!

Hello everyone, can anyone help me by giving some suggestions regarding accessing Netmetal 5 (for ptp connectivity) behind CCR! A single Netmetal 5 AP mood, connected to CCR's WAN side and I want to access both Netmetal 5 AP &ST from CCR's LAN side through winbox. Thanks in advance. Sent from my iPh...
by mfrabbibd
Sun Dec 25, 2016 8:08 pm
Forum: Wireless Networking
Topic: 70 Kms Point 2 Point link
Replies: 18
Views: 4038

Re: 70 Kms Point 2 Point link

Maybe two DynaDishes if the line of sight is clear: http://i.mt.lv/routerboard/files/antenas-160404123306.pdf I have a 50 km link with dynadish in clear area ( desert ) link speed is under 20 or 15 Mb/s and another link 82 km with netmetal5 and mant30 the link speed is 35Mb/s Thanks...!!! Planning ...
by mfrabbibd
Thu Nov 24, 2016 9:08 pm
Forum: General
Topic: 2Unequal WAN load balancing failover with PPPoE server
Replies: 0
Views: 422

2Unequal WAN load balancing failover with PPPoE server

Dear Mikrotik friends, I need your attention on my task. I've 2WAN from 2 different ISP. WAN1=10Mbps (ether1), WAN2=20mbps (ether2), LAN (ether3) I want to create PPPoE server on LAN interface . When both links are active then 10+20=30Mbps will be sharing among my PPPoE user. When One link is down t...
by mfrabbibd
Thu Nov 24, 2016 3:42 pm
Forum: Beginner Basics
Topic: 2 Unequal Load Balancing With Failover
Replies: 0
Views: 588

2 Unequal Load Balancing With Failover

Hi Dear Friends, I've 2 ISP connection and I want to do load balance this way... WAN1=10Mbps WAN2=20Mbps LAN1=30Mbps I want to create pppoe server on lan interface. when both links are active, all of my pppoe user can share total 30Mbps but when 1Link is down another link will server internet to all...
by mfrabbibd
Tue Nov 22, 2016 7:18 pm
Forum: RouterBOARD hardware
Topic: Netmetal 5 RB922UAGS-5HPacD-NM 12km ptp best configuration need.
Replies: 1
Views: 1093

Netmetal 5 RB922UAGS-5HPacD-NM 12km ptp best configuration need.

Dear Mikrotik guys, I need the best ptp configuration for Netmetal 5 RB922UAGS-5HPacD-NM Radio with 30db dish. All I need 100Mbps TCP throughput. I've tried many ways but no luck. The maximum I can get is 40Mbps MAX. It would be so helpful if you guys guide me the best way to configure those Radio. ...
by mfrabbibd
Tue Nov 15, 2016 4:30 am
Forum: RouterBOARD hardware
Topic: RB450G Brick or Can recover?
Replies: 7
Views: 1497

Re: RB450G Brick or Can recover?

you need to use a serial-to-serial cable or a serial-to-USB http://www.usbcables.com/media/catalog/product/u/s/usb-serial-adapter-for-windows-vista.jpg https://upload.wikimedia.org/wikipedia/commons/1/18/Serial_Cable.jpg Sent from my SM-N910C using Tapatalk I've this type of cable. I found a link r...
by mfrabbibd
Mon Nov 14, 2016 8:25 pm
Forum: RouterBOARD hardware
Topic: RB450G Brick or Can recover?
Replies: 7
Views: 1497

Re: RB450G Brick or Can recover?

Hi all, I was trying to format the Micro SD card installed on my Mikrotik RB450G, but in the middle of the process electricity goes off and after that I can't access the routerboard. I've tried many time the netinstall process but netinstall can't find the routerboard. Is there any other way to rec...
by mfrabbibd
Mon Nov 14, 2016 2:31 pm
Forum: RouterBOARD hardware
Topic: RB450G Brick or Can recover?
Replies: 7
Views: 1497

Re: RB450G Brick or Can recover?

Hi all, I was trying to format the Micro SD card installed on my Mikrotik RB450G, but in the middle of the process electricity goes off and after that I can't access the routerboard. I've tried many time the netinstall process but netinstall can't find the routerboard. Is there any other way to rec...
by mfrabbibd
Mon Nov 14, 2016 1:44 pm
Forum: RouterBOARD hardware
Topic: RB450G Brick or Can recover?
Replies: 7
Views: 1497

RB450G Brick or Can recover?

Hi all, I was trying to format the Micro SD card installed on my Mikrotik RB450G, but in the middle of the process electricity goes off and after that I can't access the routerboard. I've tried many time the netinstall process but netinstall can't find the routerboard. Is there any other way to reco...
by mfrabbibd
Thu Sep 08, 2016 6:39 am
Forum: The User Manager
Topic: How to Install Usermanager on SD Card
Replies: 1
Views: 2155

How to Install Usermanager on SD Card

Dear Mikrotik Expats,

Please help me installing Usermanager on Micro SD Card of my CCR1009 8G 1S 1S+. Please guide me any proper way.
Thanks a lot.
Regards,
by mfrabbibd
Sun Jun 12, 2016 2:26 pm
Forum: General
Topic: Bandwidth dristibution among Dedicated & Shared PPPoE Clients
Replies: 0
Views: 621

Bandwidth dristibution among Dedicated & Shared PPPoE Clients

I've a CCR1009 8G 1S 1S+ router for my isp. I want to create PPPoE server with usermanager on it. I've 50Mbps leased fiber line. I've 4 Dedicated PPPoE Clients who needs Dedicated connection like 5/5Mbps each and I don't want to share their Bandwidth with my shared user. As I've 50Mbps Leased fiber...
by mfrabbibd
Sun Jun 12, 2016 1:41 pm
Forum: General
Topic: What's These on LOG
Replies: 1
Views: 515

What's These on LOG

Hi, I'm using CCR1009 8G 1S 1S+ router and PPPoE server with usermanager on it. Sometimes clients get automatically disconnected. I saw some red txt on log files. whats these? if its a problem causing disconnection, how can i fix them? please help me. Thanks.
by mfrabbibd
Tue May 10, 2016 4:47 am
Forum: RouterBOARD hardware
Topic: FTC fiber to copper converter
Replies: 22
Views: 9211

Re: FTC fiber to copper converter

+1 for a revision that has a small splice tray inside it.
Can anyone please tell me the FTC11 support 155M non Mikrotik SFP or not?
by mfrabbibd
Mon May 09, 2016 8:03 pm
Forum: RouterBOARD hardware
Topic: Urgent Help Needed from Mikrotik Support or Mikrotik Exparts about FTC11 155M SFP Compitability
Replies: 0
Views: 935

Urgent Help Needed from Mikrotik Support or Mikrotik Exparts about FTC11 155M SFP Compitability

Dear Friends, I need urgent help. Tomorrow I'll getting Fiber Line from my Provider. They are using 155M Multimood SFP on their end so they told me to use 155M Multimood SFP on my end as well. My question is that, Will FTC11 Compitable with 155M (not 1.25G or 10G ) Multimood Non Mikrotik SFP? Thanks...
by mfrabbibd
Tue May 03, 2016 5:10 am
Forum: General
Topic: PPPoE Authentication for Share & Dedicated users on the same Ethernet port.
Replies: 3
Views: 935

Re: PPPoE Authentication for Share & Dedicated users on the same Ethernet port.

You can using static ip address from pppoe server (secret) put your static ip in remote address inside secret and then apply to all user's you like to be share bandwidth , and also when finish you can going in queues to allow who was static ip in pppoe server ,, to apply queue to them,, regards Tha...
by mfrabbibd
Mon May 02, 2016 3:25 pm
Forum: General
Topic: PPPoE Authentication for Share & Dedicated users on the same Ethernet port.
Replies: 3
Views: 935

PPPoE Authentication for Share & Dedicated users on the same Ethernet port.

Dear Mikrotik Exparts, I bought a CCR1009 8G 1S 1S+ router for my isp. I want to create PPPoE server with usermanager on it. I've 50Mbps leased fiber line. I want to reserve 10Mbps Bandwidth for my 5Dedicated users and rest 40Mbps for my shared users. Both dedicated and shared users authentication w...
by mfrabbibd
Sun May 01, 2016 5:52 pm
Forum: General
Topic: SFP+ 1m direct attach cable Compitability Issue
Replies: 1
Views: 641

SFP+ 1m direct attach cable Compitability Issue

Can anyone please confirm me about the compitability of SFP+ 1m direct attach cable between Mikrotik CCR 1009 8G 1S 1S+ and Huawei Quidway S2016TP-EA switch?
by mfrabbibd
Sun Apr 24, 2016 4:23 am
Forum: General
Topic: Is this possible?
Replies: 2
Views: 709

Is this possible?

Dear Mikrotik Experts, I've a CCR 1009 8G 1S 1S+ router. I'm using ether 1 as WAN & ether 2 as PPPoE server. What I want to do is, I've 20 Mbps fiber connection serving 50 shared users. Now I want to add another 10 Mbps (total 20+10=30) for 5 of my dedicated customers because they don't want to use ...
by mfrabbibd
Sun Feb 21, 2016 8:45 pm
Forum: RouterBOARD hardware
Topic: CCR1009 8G 1S 1S+ Powering on PoE Safe or Not?
Replies: 2
Views: 1106

CCR1009 8G 1S 1S+ Powering on PoE Safe or Not?

Hello, Can anyone please give me some info regarding CCR1009 8G 1S 1S+ Powering on PoE Safe or Not? I think PoE on port 8 is not much powerful than the PSU supplied but I need to powe the CCR with DC batteries. Can anyone please advice me choosing the right battery? I've a 12V 7.5 Amp. With fully ch...
by mfrabbibd
Sun Feb 21, 2016 3:06 am
Forum: General
Topic: Load Balancing Like That...
Replies: 5
Views: 1064

Re: Load Balancing Like That...

I believe that was an error in his typing during his video, just put normal spacing and ignore that part, I looked at that a couple of times as well.
I've tried a lot but this tutorial doesn't work for me. Anyway is it possible to make 2wan load balancing and PPPoE server on the same router?
by mfrabbibd
Sat Feb 20, 2016 3:24 pm
Forum: General
Topic: Load Balancing Like That...
Replies: 5
Views: 1064

Re: Load Balancing Like That...

I just programmed up using this video as reference and it works well, hopefully this is what you are looking for: https://www.youtube.com/watch?v=dnLKyu4_md8 Thank you very much brother. Can I get your email address for some help? It would be so kind of you. Thanks once again. Brother I don't under...
by mfrabbibd
Sat Feb 20, 2016 6:19 am
Forum: General
Topic: Load Balancing Like That...
Replies: 5
Views: 1064

Re: Load Balancing Like That...

I just programmed up using this video as reference and it works well, hopefully this is what you are looking for:

https://www.youtube.com/watch?v=dnLKyu4_md8

Thank you very much brother. Can I get your email address for some help? It would be so kind of you.

Thanks once again.
by mfrabbibd
Fri Feb 19, 2016 5:56 pm
Forum: General
Topic: Load Balancing Like That...
Replies: 5
Views: 1064

Load Balancing Like That...

Hi, I want to do my mikrotik like that, ether1(WAN1) =50Mbps fiber, ether2(WAN2)=10Mbps fiber,& ether3(LAN) for PPPoE server. I've total 250 PPPoE Clients who will share internet from the total (50+10=60Mbps)60Mbps bandwidth when both WAN1 & WAN2 are active. When WAN1 is absent somehow, WAN2 will do...
by mfrabbibd
Sun Jan 03, 2016 9:44 pm
Forum: Wireless Networking
Topic: Basebox 2 as PPPoE AP WDS configuration
Replies: 0
Views: 1262

Basebox 2 as PPPoE AP WDS configuration

Hello dear Mikrotik people, Can anyone please help me regarding the issue. I need to configure my Basebox2 for mentioned below. 1. I've a CCR 1009 8G 1S 1S + running PPPoE server on ether3 and I want my Basebox 2 works as PPPoE AP Bridge mood for my PPPoE clients. 2. If I want to configure my Basebo...
by mfrabbibd
Sun Jan 03, 2016 3:08 pm
Forum: RouterBOARD hardware
Topic: Basebox 2 can't login
Replies: 1
Views: 484

Basebox 2 can't login

Can anyone please help me? I can't login to basebox2 after disabled all the interface. What to do?
by mfrabbibd
Fri Nov 20, 2015 8:02 pm
Forum: General
Topic: How to use maximum available bandwidth
Replies: 2
Views: 1061

Re: How to use maximum available bandwidth

Dear Friend, can you please provide me a demo or script for that issue? Thanks.
by mfrabbibd
Sat Nov 14, 2015 12:33 pm
Forum: General
Topic: How to use maximum available bandwidth
Replies: 2
Views: 1061

How to use maximum available bandwidth

Dear Mikrotik friends, I'm using Mikrotik CCR1009 8G 1S-1S+ for my WISP. I've configured PPPoE server with Usermanager. Currently I'm using 20Mbps fiber connection for Backbone and I've 30 users at the moment. All the users are not online at the same time. Sometime I found only 5 to 10 customers are...
by mfrabbibd
Sun Nov 08, 2015 10:22 am
Forum: The User Manager
Topic: IP Range sample for 500 PPPoE User
Replies: 6
Views: 3139

Re: IP Range sample for 500 PPPoE User

Thanks again Sinan, if I put the ip ranges you provided for PPPoE server pool than what kind of IP addresses I need to use for my Radio AP and Cpe's devices? I've 4 UBNT rocket m5 connected with that lan port via unmanageable dlink switch. The IP addresses for the radios are 192.168.1.20 something l...
by mfrabbibd
Sun Nov 08, 2015 10:15 am
Forum: The User Manager
Topic: How to renew users after validity expires.
Replies: 2
Views: 1665

Re: How to renew users after validity expires.

Thanks a lot, I thought that, I must put something on the validity tab.
by mfrabbibd
Thu Nov 05, 2015 8:36 pm
Forum: The User Manager
Topic: How to renew users after validity expires.
Replies: 2
Views: 1665

How to renew users after validity expires.

Dear experts, I'm using PPPoE server with usermanager but I need to know how I can renew users account after validity expired. I don't want to create users every months for my regular clients. Is there any options like, if I put tick marks before the users details it'll automatically renew for the n...
by mfrabbibd
Tue Nov 03, 2015 6:22 am
Forum: The User Manager
Topic: IP Range sample for 500 PPPoE User
Replies: 6
Views: 3139

IP Range sample for 500 PPPoE User

Dear all, Can anyone please help me providing the info? I bought a CCR1009 8G 1S 1S+ to configure PPPoE server with usermanager for 500 clients. I'm in confusion using the proper IP address to serve 500 PPPOE client. Can anyone please give me a real template? ether1 will be WAN & ether2 will be LAN....
by mfrabbibd
Thu Oct 01, 2015 5:01 am
Forum: The User Manager
Topic: recharge an userman account with pin & password
Replies: 3
Views: 12525

Re: recharge an userman account with pin & password

I don't know what's your configuration? PPPoE or Hotspot .. i am described here only PPPoE & user manager setup for your pin & password This guide will illustrate howto create PPPoE server in MIKROTIK RouterOS (I used v 5.21 in this example). This article will also demonstrate on how you can create...
by mfrabbibd
Wed Sep 30, 2015 5:56 am
Forum: Wireless Networking
Topic: Urgent advice need for the configuration.
Replies: 2
Views: 689

Re: Urgent advice need for the configuration.

Still no one to help me?
by mfrabbibd
Tue Sep 29, 2015 9:35 pm
Forum: Wireless Networking
Topic: Urgent advice need for the configuration.
Replies: 2
Views: 689

Urgent advice need for the configuration.

Dear Mikrotik Experts, I bought a Basebox 2 for a small wifi hotspot. I'm searching on the web for 2/3days but failed to find the proper method. When user search for wifi network on their smartphone or laptop under wifi coverage of Basebox, they will get an open SSID and after selecting the SSID, us...
by mfrabbibd
Mon Sep 28, 2015 10:35 am
Forum: RouterBOARD hardware
Topic: 2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User
Replies: 10
Views: 1557

Re: 2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User

Thank you very much. I'll go for CCR1009. I need another help. Yesterday I bought a Basebox2 for learning purpose. I want to make Hotspot with usermanager radius server on it. I know it has license level 4 so 20 user can access internet at a time. I've tried a lot but i couldn't configured successfu...
by mfrabbibd
Sun Sep 27, 2015 7:00 pm
Forum: RouterBOARD hardware
Topic: 2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User
Replies: 10
Views: 1557

Re: 2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User

i think rb450g its very outdated. Maybe rb850gx2 is a better option, has the same form factor and low power comsumption too, more cpu performance and ram. i think rb450g its very outdated. Maybe rb850gx2 is a better option, has the same form factor and low power comsumption too, more cpu performanc...
by mfrabbibd
Sun Sep 27, 2015 8:40 am
Forum: RouterBOARD hardware
Topic: 2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User
Replies: 10
Views: 1557

Re: 2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User

i think rb450g its very outdated. Maybe rb850gx2 is a better option, has the same form factor and low power comsumption too, more cpu performance and ram. i think rb450g its very outdated. Maybe rb850gx2 is a better option, has the same form factor and low power comsumption too, more cpu performanc...
by mfrabbibd
Sun Sep 27, 2015 6:48 am
Forum: RouterBOARD hardware
Topic: 2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User
Replies: 10
Views: 1557

2X RB450G as PPPoE and Hotspot Server with User manager Radius Server Max User

Dear Experts, Can anyone help me by giving the following info regarding RB450G. I'm planning to buy 2X RB450G for PPPoE and Hotspot Server with User manager Radius Server. I've 50 User on PPPoE and another 50 User on Hotspot. I want to use separate PPPoE or Hotspot for each RB450G. My Data Plan woul...
by mfrabbibd
Fri Sep 04, 2015 9:56 pm
Forum: Beginner Basics
Topic: Expert Advice Needed
Replies: 1
Views: 730

Expert Advice Needed

Dear All, I'm studying MT forum for approximate 1 and half a year. Now I've start my WISP project that's why I need Expert Advice. Please help me the regarding issues... I want to use RB1100AHX2 as my principal router to manage approximately 100 PPPoE and 200 Hotspot client both are using Mikrotik U...
by mfrabbibd
Fri Aug 29, 2014 11:24 pm
Forum: RouterBOARD hardware
Topic: Which is best, PC based X86 router or Routerboard itself?
Replies: 3
Views: 5504

Which is best, PC based X86 router or Routerboard itself?

Hello Mikrotik Experts, I'm thinking to assemble a PC with Gigabyte Motherboard, Intel Core I3 Processor, 4GB Ram, 500GB HDD, 1PCI Gigabit LAN Card to install Router OS on it for my WISP or I should use RB1100 AHX2 ? what system will give me the best performance? PC based router or Routerboard itsel...
by mfrabbibd
Fri Jul 25, 2014 11:29 pm
Forum: The User Manager
Topic: what does it means by User manager active sessions
Replies: 1
Views: 1913

what does it means by User manager active sessions

Hello guys, Can anyone please explain, what does it means by User manager active sessions? As I came to know, RB450G has license level 5, so it has 50 User manager active sessions capability. I want to create PPPoE server and radius manager on RB450G so is it mean, I can only serve only maximum 50 u...
by mfrabbibd
Sat Jun 14, 2014 10:17 pm
Forum: General
Topic: Mikrotik Basebox5 AP's with UBNT CPE's NBE M5
Replies: 1
Views: 872

Mikrotik Basebox5 AP's with UBNT CPE's NBE M5

Hi All, I want to use Mikrotik Basebox5 with sectors as AP on my tower and UBNT CPE's Like NBE M5 or NSM5 or M5 loco for clients. I want to setup Mikrotik Basebox5 as AP Bridge and UBNT CPE's as Station WDS or in router mood. if so is the link possible? Please advice me the right solution if I use M...
by mfrabbibd
Mon Jun 02, 2014 9:53 am
Forum: General
Topic: Best User Authentication Method for a small WISP
Replies: 1
Views: 904

Best User Authentication Method for a small WISP

Hi guys, I need your kind advice. What is the best user authentication method for a small WISP which has 100 Clients? Hardware List: * 1X RB450G as a Principal Router to Manage the client and bandwidth * 3X Basebox5 with Sectors * SXT Lite 5, Nanostation Loco5, SXT SA, SEXTANT G 5HPnD as clients CPE...
by mfrabbibd
Tue May 27, 2014 10:03 pm
Forum: General
Topic: BaseBox5 P2MP AP & SXT Lite5 CPE Configuration
Replies: 5
Views: 1490

Re: BaseBox5 P2MP AP & SXT Lite5 CPE Configuration

Your advice is appreciated but there is no MTCWE course available in my country. Can you please give me any link where i can get some idea about ptmp ap configuration?

Regards,
by mfrabbibd
Tue May 27, 2014 9:39 pm
Forum: General
Topic: BaseBox5 P2MP AP & SXT Lite5 CPE Configuration
Replies: 5
Views: 1490

Re: BaseBox5 P2MP AP & SXT Lite5 CPE Configuration

Dear Rextended,
Thanks for your replay. I've only 20Mbps Fiber Optic Bandwidth as backhaul connection. I may have maximum of 100 CPE.
So RB450G will be sufficient for me, am I right? can you please give me any configuration tutorial how to connect 3X Basebox5 in RB450G as PtMP AP mood?

Thanks a lot.
by mfrabbibd
Tue May 27, 2014 11:24 am
Forum: General
Topic: BaseBox5 P2MP AP & SXT Lite5 CPE Configuration
Replies: 5
Views: 1490

BaseBox5 P2MP AP & SXT Lite5 CPE Configuration

Hello Guys, Can anyone help with the BaseBox5 P2MP AP & SXT Lite5 CPE configuration? I've Basebox5 with 16dB Sector mount on 90 foot height tower, RB450G as principal router to manage my clients and SXT Lite5 for my clients around 1/2km away with clear LOS. What is the best system, pppoe or anything...
by mfrabbibd
Thu May 22, 2014 9:45 pm
Forum: General
Topic: Basebox5 with Dish Tower Height Advice for Backhaul
Replies: 7
Views: 1030

Re: Basebox5 with Dish Tower Height Advice for Backhaul

Can you please write me about the configuration step by step guide of (both H/V chain enabled, 20+20MHz using NV2!)? can you transmit 50mbps on your link?

Regards.
by mfrabbibd
Thu May 22, 2014 8:42 pm
Forum: General
Topic: Basebox5 with Dish Tower Height Advice for Backhaul
Replies: 7
Views: 1030

Re: Basebox5 with Dish Tower Height Advice for Backhaul

Hello rextended, Are you sure about "Sextant G" will be able to connect 7000 meters(7miles/11.34km) long distance link? As I've studied "Sextant G" has only 18dbi inbuilt antenna where RB911 is used. It has only 600Mhz Procesor, 32mb RAM, 30dbm wireless card inbuilt. If some how it's possible to get...
by mfrabbibd
Thu May 22, 2014 7:12 am
Forum: General
Topic: Basebox5 with Dish Tower Height Advice for Backhaul
Replies: 7
Views: 1030

Re: Basebox5 with Dish Tower Height Advice for Backhaul

The total distance between two towers would be 7000 meters(7miles/11.34km)
Tower present height 26meters both.
by mfrabbibd
Wed May 21, 2014 9:32 pm
Forum: General
Topic: Basebox5 with Dish Tower Height Advice for Backhaul
Replies: 7
Views: 1030

Basebox5 with Dish Tower Height Advice for Backhaul

Hello Friends, I need your help to deploy a PTP Backhaul (30mbps) connection between two sites with Basebox5 with Dish ' for my WISP. I’ve researched lots of forum and tools for the Backhaul but didn’t get final destination. I’ve calculated by using AirLink and Radio Mobile for the Backhaul but I’m ...
by mfrabbibd
Thu May 15, 2014 8:52 pm
Forum: Beginner Basics
Topic: Advice for Configuration
Replies: 3
Views: 957

Re: Advice for Configuration

Thanks a lot Rextended,

Can you please advice me some general idea for for the configuration of RB450G and Basebox5?

Thanks once again.
by mfrabbibd
Tue May 13, 2014 11:42 am
Forum: Beginner Basics
Topic: Advice for Configuration
Replies: 3
Views: 957

Advice for Configuration

Hi, All the valuable members and experts of the forum, I need your kind help and advice for configuration of the scenario. I've 4X Basebox5(5GHz) AP with 18dBi, 90 Degree RFelements Mimo Sector Antenna Mount on a 80Feet high tower to cover 360 degree, 1X Mikrotik RB450G ( As Principal Router to mana...
by mfrabbibd
Sun May 04, 2014 10:23 am
Forum: RouterBOARD hardware
Topic: Which are the best Hardware between BaseBox5 or RB435G
Replies: 1
Views: 1088

Which are the best Hardware between BaseBox5 or RB435G

Hello guys, I want to know which are the best hardware between BaseBox5(RB912UAG-5HPnD) or the RB435G with wireless cards for Point to Multipoint AP's? I was Planning for 1 of RB435G with 3 sets of R52Hn Card with 3 sets rfelements mimo 5ghz 16db 120 degree sector for 360 coverage. Or 3 Basebox5 sep...
by mfrabbibd
Wed Apr 16, 2014 7:33 pm
Forum: Wireless Networking
Topic: One CPE Multiple Client
Replies: 3
Views: 970

Re: One CPE Multiple Client

Thanks for your Replay n21roadie,

I've already done frequency test. 2.4 ghz & 5.8 both are free here. its a very small rural area. there are only four moble phone BTS around 1km away from my proposed base station. the cell phone bts r providing EDGE internet, not even 3g.
by mfrabbibd
Wed Apr 16, 2014 6:28 pm
Forum: Wireless Networking
Topic: One CPE Multiple Client
Replies: 3
Views: 970

One CPE Multiple Client

Hello Mikrotik Experts, I need to know some thing about WISP setup. It's been couple of months I started researching on Mikrotik & Ubnt forum. 1. For 1-10km Redius from base station (with perfect LOS)which Radios are best, MT or Ubnt? as I read lots of manual,MT's Radios are pretty high configuratio...
by mfrabbibd
Tue Apr 15, 2014 8:07 pm
Forum: RouterBOARD hardware
Topic: Advice for WISP Base Station
Replies: 5
Views: 2815

Re: Advice for WISP Base Station

I'm sorry to forget 1thing, if I use RB2011UiAS instead of RB1100AHX2 will it be possible to manage 100 clients?
by mfrabbibd
Tue Apr 15, 2014 7:11 pm
Forum: RouterBOARD hardware
Topic: Advice for WISP Base Station
Replies: 5
Views: 2815

Re: Advice for WISP Base Station

Many many thanks for your advice Rextended, I've approximately 100 customers who will provide their own cpe SXT Lite5 around 5km away from my base Station. In that case If I use 4 Basebox5 with rfelement 18dB 90 degree mimo sector antenna, will it be possible? I also want to setup 5hotspot around 1/...
by mfrabbibd
Tue Apr 15, 2014 1:04 pm
Forum: RouterBOARD hardware
Topic: Advice for WISP Base Station
Replies: 5
Views: 2815

Advice for WISP Base Station

Dear Experts of this forum, I need your advice to setup my wisp. at first I thought MT Basebox5 with 4 of Rfelements 18dB 90degree 5GHz sector Antenna for point to multipoint ap but now I'm thinking of RB435G with 4 of R52Hn Wireless cards and 4of above mentioned Rfelement sectors. Now I want to kno...
by mfrabbibd
Tue Apr 08, 2014 10:06 pm
Forum: General
Topic: Advice and Configuration need for the Scenario
Replies: 1
Views: 689

Re: Advice and Configuration need for the Scenario

:( Still waiting for the advice from experts....
by mfrabbibd
Tue Apr 01, 2014 11:08 pm
Forum: RouterBOARD hardware
Topic: RB2011UiAS-RM microUSB port for Web Proxy
Replies: 2
Views: 1581

RB2011UiAS-RM microUSB port for Web Proxy

Hi All,

1. Can I use 16GB USB Flash Drive on RB2011UiAS-RM to store Web Proxy data same as MicroSD card do on RB450G ?
2. Can I use multi USB Adapter on RB2011UiAS-RM to use 3G Modem and 16GB USB Flash Drive together?

Thanks...
by mfrabbibd
Tue Apr 01, 2014 8:20 pm
Forum: General
Topic: Advice and Configuration need for the Scenario
Replies: 1
Views: 689

Advice and Configuration need for the Scenario

Hi, All the valuable members and experts of the forum, I need your kind help and advice for configuration of the scenario on the image if possible. I've 3X Basebox5(5GHz) AP with 18dBi, 90 Degree RFelements Mimo Sector Antenna Mount on a 90Feet high tower, 1X Mikrotik RB2011UiAS-RM ( As Principal Ro...
by mfrabbibd
Mon Mar 31, 2014 10:40 pm
Forum: Wireless Networking
Topic: Best advice and Configuration need for the Scenario
Replies: 0
Views: 794

Best advice and Configuration need for the Scenario

Hi, All the valuable members and experts of the forum, I need your kind help and advice for configuration of the scenario on the image if possible. I've 3X Mikrotik Basebox 5(5GHz) AP with 18dBi, 90 Degree RFelements Mimo Sector Antenna Mount on a 90Feet high tower, 1X Mikrotik RB2011UiAS-RM ( As Pr...
by mfrabbibd
Thu Mar 27, 2014 6:28 am
Forum: Wireless Networking
Topic: Small WISP Design and Advice Needed
Replies: 2
Views: 1866

Re: Small WISP Design and Advice Needed

Thanks a lot Troy for your Co-Operation. What does it mean by "If that's the extent of your network" ? I didn't start any project yet but planning to start. Actually I can do networking but have a little knowledge about Mikrotik Router OS. My whole network will be on 5GHz so Laptop and Mobile user c...
by mfrabbibd
Mon Mar 24, 2014 5:36 am
Forum: Wireless Networking
Topic: Small WISP Design and Advice Needed
Replies: 2
Views: 1866

Small WISP Design and Advice Needed

Dear All, I want to start a small WISP that's why I need help from you. I want to use 3 RFelements 5Ghz 18dbi Sector Antenna with 3 Mikrotik Base Box5 and And the Backhaul connection using Nano Beam M5-400 . The main management router of the Base Station would be RB2011UiAS-RM and SXT Lite5 as CPE. ...
by mfrabbibd
Mon Mar 10, 2014 4:33 pm
Forum: General
Topic: Product Recommendation and Guideline
Replies: 1
Views: 544

Product Recommendation and Guideline

Hi everybody, I'm planning to start a WISP. I've 20 mbps Submarine Cable Duplex IP Bandwidth (Leased Internet Access) connection in my Branch Office as well as a 70 feet height tower and the same tower at my Main Office which is 12km far away from the Branch Office. I want to setup a Base Station wi...
by mfrabbibd
Fri Feb 28, 2014 9:36 pm
Forum: Wireless Networking
Topic: Product Recommendation and Guideline
Replies: 4
Views: 2644

Re: Product Recommendation and Guideline

Thanks a lot for your advice Rextended. Can you please give me the reason of not to using Omni-directional Antennas, 2.4Ghz for CPE's and why I should use Mikrotik Hardware? as there are many of companies manufacturing such popular devices nowadays. The one is Airmax from Ubiquiti. Some one has advi...
by mfrabbibd
Thu Feb 27, 2014 8:09 pm
Forum: Wireless Networking
Topic: Product Recommendation and Guideline
Replies: 4
Views: 2644

Product Recommendation and Guideline

Hi Everybody, I'm planning to start a WISP and that's why I'm thinking of SEXTANT G 5HPnD (Two sets) between 12km distance for P2P backbone (Fiber Optic Duplex IP 10Mbps Leased Internet connection) connection. I've a 70 feet high tower where I want to setup 3 sets of BaseBox2 (RB912UAG-2HPnD) with R...
by mfrabbibd
Mon Feb 24, 2014 9:01 pm
Forum: Wireless Networking
Topic: Base Station with Metal 5SHPn and 16db omni directional ante
Replies: 3
Views: 1555

Base Station with Metal 5SHPn and 16db omni directional ante

Hello Everybody, I want to start a WISP and for this I want to setup one Metal 5SHPn and one 16db Omni-Directional Antenna on the top of 60 feet antenna tower to through P2MP signal. Now my question is that, if I setup according to my statement so what would be the Maximum distance for CPE (Clients)...
by mfrabbibd
Sat Feb 22, 2014 9:50 pm
Forum: Wireless Networking
Topic: WiFi Mesh with Groove 52HPn & 16DBi Omnidirectional Antenna
Replies: 3
Views: 1804

WiFi Mesh with Groove 52HPn & 16DBi Omnidirectional Antenna

Hello every body, I'm planning to start WiFi Mesh Network with Groove 52HPn and 16DBi Omnidirectional Antenna to cover 1km Long Straight main Road. I'm planning to setup 5set of Groove 52HPn and 16DBi Omnidirectional Antenna after each 100m distance. I need to connect with my 50 clients who resides ...