Community discussions

MikroTik App

Search found 59 matches

by Beelze
Thu Oct 03, 2019 12:03 pm
Forum: General
Topic: IPv6 - PPPoE client
Replies: 1
Views: 757

Re: IPv6 - PPPoE client

Update: I got something working with NDRA from the BRAS / PPPoE server, but the requirements move more towards DHCPv6 IA_NA and DHCPv6 Prefix Delegation from the server.
Is there any basic configuration needed in order for this to work?
by Beelze
Fri Sep 13, 2019 10:52 am
Forum: General
Topic: IPv6 - PPPoE client
Replies: 1
Views: 757

IPv6 - PPPoE client

Aside from IPv4, I'm working on getting IPv6 working on the Mikrotik's PPPoE client as well. I've tried searching for a solution, but that's mostly about DHCPv6 client. I work at an ISP and am in control of the BRAS and the AAA/RADIUS (FreeRADIUS) server. Maybe it's more a RADIUS than a Mikrotik que...
by Beelze
Tue Dec 18, 2018 10:27 am
Forum: General
Topic: Shaper / policer
Replies: 3
Views: 717

Re: Shaper / policer

Hi trace323, Remove that low quality RB3011. Need to piut a CCR-1009. What do you mean by low quality? I know that doing a Bandwidth Test on a RB3011, it will spike its CPU. But doing a speedtest (ookla for example) on a laptop behind the RB3011, it shouldn't be doing anything of that right? Marijn
by Beelze
Thu Dec 13, 2018 1:55 pm
Forum: General
Topic: Shaper / policer
Replies: 3
Views: 717

Shaper / policer

Hello all, We've been trying to get a customer get close to 1Gbps on a 1Gbps circuit when doing an Ookla speedtest. The customer has an RB3011 as its router which we as an ISP manage. The initial TCP resulted in download 477 Mbps and upload 921 Mbps, but later tests showed different results (like 40...
by Beelze
Wed Apr 18, 2018 10:46 am
Forum: General
Topic: Strange [SOLVED]
Replies: 3
Views: 713

Re: Strange [SOLVED]

Thanks a lot!
That did the trick. It was neighbor discovery all along.

It's strange that google can't find anything about IPv6HAXORS.
by Beelze
Wed Apr 18, 2018 10:01 am
Forum: General
Topic: Strange [SOLVED]
Replies: 3
Views: 713

Strange [SOLVED]

Hello, Just a small question about something I see appearing in the logs: IPV6HAXORS input: in:bond1_vlan20 out:(none), proto UDP, [fe80::e68d:8cff:fe01:c9f4]:5678->[ff02::1]:5678, len 148 I see this appear in the logs every minute. I just disabled everything that does anything with IPv6 (except for...
by Beelze
Mon Jun 12, 2017 3:21 pm
Forum: General
Topic: Mikrotik reachability behind another Mikrotik
Replies: 3
Views: 430

Re: Mikrotik reachability behind another Mikrotik

Hi Jarda, All the clients have a public IP address being PPPoE clients. Alle the IP addresses are excluded from NAT in the core Mikrotik firewall filter. So there is no NAT involved here. Also, the core Mikrotik does not have a masquerade rule, it should just passthrough all traffic. This should be ...
by Beelze
Mon Jun 12, 2017 2:44 pm
Forum: General
Topic: Mikrotik reachability behind another Mikrotik
Replies: 3
Views: 430

Mikrotik reachability behind another Mikrotik

Hello all, At a customer site we installed a Mikrotik CCR (core) serving internet to hAp Lites through PPPoE. A setup we use very often in buildings with multiple sub customers. The core Mikrotik is pingable and reachable through SNMP. However, all the other PPPoE client hAp Lites can be reached wit...
by Beelze
Tue Apr 04, 2017 10:54 am
Forum: Forwarding Protocols
Topic: BGP doesn't always install default route from Juniper
Replies: 0
Views: 367

BGP doesn't always install default route from Juniper

Hello, I have set up two BGP sessions between a Juniper and a Mikrotik like this: Mikrotik <-- BGP session 1 --> Juniper <-- BGP session 2 --> Both sessions are established easily and the Juniper then has a route to the advertised mikrotik route via both ways. If I disable and then enable session 1 ...
by Beelze
Tue Mar 28, 2017 6:06 pm
Forum: Forwarding Protocols
Topic: External BGP with Mikrotik (private ASN) to Juniper (public ASN) - Holdtimer expired
Replies: 1
Views: 864

External BGP with Mikrotik (private ASN) to Juniper (public ASN) - Holdtimer expired

Hello, I'm trying to setup a BGP session between my Mikrotik assigned with a private ASN and our Juniper core router with a public ASN. Let's say I'm using 10.0.0.0/30 as the subnet between the two (directly connected) with .1 Juniper and .2 mikrotik. A traceroute on both devices to the other side s...
by Beelze
Wed Oct 26, 2016 10:43 am
Forum: General
Topic: DHCP relay over IPSec VPN
Replies: 1
Views: 1731

Re: DHCP relay over IPSec VPN

Some debugging showed me this firewall action: 09:29:17 firewall,info srcnat: in:(none) out:ether1, proto UDP, 1.1.1.1:67->192.168.10.30:67, len 328 Shouldn't the WAN IP 1.1.1.1 be 192.168.1.1? That is the local LAN IP I set up on the DHCP relay. The IPSec policy is set on src-address=192.168.1.0 an...
by Beelze
Tue Oct 25, 2016 6:07 pm
Forum: General
Topic: DHCP relay over IPSec VPN
Replies: 1
Views: 1731

DHCP relay over IPSec VPN

Hi all, I've been trying to relay DHCP requests from one LAN to remote LAN over IPSec. I'm trying to build the same network as a customer of ours currently has, but this time with Mikrotiks. This is the setup I have built: laptop <--> LOCAL_MIK <---> internet mikrotik <---> MAIN_MIK <--> dhcp-server...
by Beelze
Thu Apr 14, 2016 4:44 pm
Forum: Scripting
Topic: routerOS bandwidth-test giving me wrong results
Replies: 0
Views: 631

routerOS bandwidth-test giving me wrong results

Hi everyone, For a customer of mine I have created a Mikrotik management network of 8 RB2011's. These Mikrotiks are monitored in LibreNMS. I've created a plugin that measures ping statistics, SFP tx/rx dBm and throughput and puts these in Round Robin Database (RRD) files. The data in these RRD files...
by Beelze
Wed Mar 09, 2016 4:42 pm
Forum: Scripting
Topic: PHP API: "Class Client could not be loaded from Client.php, file does not exist"
Replies: 8
Views: 2054

Re: PHP API: "Class Client could not be loaded from Client.php, file does not exist"

Whoa, so much things to clear up... I'm so sorry for having to do this... Well, im not. Of course I have read the wiki, but things were still not very clear to me how things were supposed to set up. Perhaps I should have stated that I DID read the wiki. But I must thank you for your clear explanati...
by Beelze
Tue Mar 08, 2016 12:36 pm
Forum: Scripting
Topic: PHP API: "Class Client could not be loaded from Client.php, file does not exist"
Replies: 8
Views: 2054

Re: PHP API: "Class Client could not be loaded from Client.php, file does not exist"

UPDATE: I finally got it working, I had to use the setArgument() method twice for this to work: $monitor = new RouterOS\Request('/interface/ethernet/monitor'); $monitor->setArgument('numbers', '10'); $monitor->setArgument('once'); $responses = $client->sendSync($monitor); echo '<pre>'; var_dump($res...
by Beelze
Tue Mar 08, 2016 11:53 am
Forum: Scripting
Topic: PHP API: "Class Client could not be loaded from Client.php, file does not exist"
Replies: 8
Views: 2054

Re: PHP API: "Class Client could not be loaded from Client.php, file does not exist"

Thanks @noib! The Net_Transmitter phar file did the job for me. However, I got one followup question though: I'm trying to monitor my SFP1 interface to get the sfp-tx-power and sfp-rx-power properties, but I'm getting no luck with the code. This is what I have: $monitor = new RouterOS\Request('/inte...
by Beelze
Tue Mar 08, 2016 11:12 am
Forum: Scripting
Topic: PHP API: "Class Client could not be loaded from Client.php, file does not exist"
Replies: 8
Views: 2054

Re: PHP API: "Class Client could not be loaded from Client.php, file does not exist"

I defined those constants myself:
define('TYPE_DATA', '!re');
define('TYPE_FINAL', '!done');
define('TYPE_ERROR', '!trap');
define('TYPE_FATAL', '!fatal');
by Beelze
Tue Mar 08, 2016 10:18 am
Forum: Scripting
Topic: PHP API: "Class Client could not be loaded from Client.php, file does not exist"
Replies: 8
Views: 2054

Re: PHP API: "Class Client could not be loaded from Client.php, file does not exist"

I changed $client = new Client('192.168.100.1', 'admin', 'password', 8728); to $client = new RouterOS\Client('192.168.100.1', 'admin', 'password', 8728); and the API now connects successfully, the next thing that happens is this: "Class Response could not be loaded from Response.php, file does not e...
by Beelze
Tue Mar 08, 2016 9:57 am
Forum: Scripting
Topic: PHP API: "Class Client could not be loaded from Client.php, file does not exist"
Replies: 8
Views: 2054

PHP API: "Class Client could not be loaded from Client.php, file does not exist"

I'm trying the recommended PHP API: <?php use PEAR2\Net\RouterOS; require_once 'PEAR2_Net_RouterOS-1.0.0b5.phar'; try { $client = new Client('192.168.100.1', 'admin', 'password', 8728); echo 'Connected!'; $responses = $client->sendSync(new RouterOS\Request('/ip/arp/print')); foreach ($responses as $...
by Beelze
Fri Mar 04, 2016 2:48 pm
Forum: Scripting
Topic: Bandwidth test script
Replies: 2
Views: 1995

Bandwidth test script

Hello all, I'm trying to create a script in RouterOS that does a bandwidth test (see below). The purpose of the script is to check if the bandwidth to another mikrotik router gets below a certain threshold (in my example I use 700 Mbps). If it does, the script has to raise an error. The $"tx-current...
by Beelze
Tue Jan 27, 2015 2:44 pm
Forum: RouterBOARD hardware
Topic: Rackmount ears for CRS212
Replies: 2
Views: 944

Re: Rackmount ears for CRS212

Hey normis,

Nice post. I have checked the shelfs out, but that's not what we are looking for. We're now thinking of placing some sort of a U-formed rack ear between the 2 switches. We'll have to buy a 90 degree screw driver for that though :P
by Beelze
Tue Jan 27, 2015 1:09 pm
Forum: RouterBOARD hardware
Topic: Rackmount ears for CRS212
Replies: 2
Views: 944

Rackmount ears for CRS212

Been a while since my last post, but I'm back with a short one :) I hope I posted this in the right category. My company bought 2 CRS212's and so far we have been very content with its performance. When attaching the rack mount ears to the sides of the switches we directly came to the conclusion tha...
by Beelze
Tue Jun 10, 2014 2:14 pm
Forum: Forwarding Protocols
Topic: prevent OSPF dynamic routes / interfaces
Replies: 4
Views: 2406

Re: prevent OSPF dynamic routes / interfaces

Oh and the routes show the correct interfaces and cost now: [admin@MikroTik] /routing ospf route> print # DST-ADDRESS STATE COST GATEWAY INTERFACE 0 10.10.10.0/30 intra-area 50 0.0.0.0 ether2 1 10.10.10.4/30 intra-area 100 0.0.0.0 ether3 2 127.0.0.30/32 intra-area 10 0.0.0.0 loopback /routing ospf n...
by Beelze
Tue Jun 10, 2014 1:51 pm
Forum: Forwarding Protocols
Topic: prevent OSPF dynamic routes / interfaces
Replies: 4
Views: 2406

Re: prevent OSPF dynamic routes / interfaces

[admin@MikroTik] /routing ospf network> print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.10.0/30 backbone 1 10.10.10.4/30 backbone 2 127.0.0.30/32 backbone [admin@MikroTik] /routing ospf interface> print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRI N...
by Beelze
Tue Jun 10, 2014 12:52 pm
Forum: Forwarding Protocols
Topic: prevent OSPF dynamic routes / interfaces
Replies: 4
Views: 2406

prevent OSPF dynamic routes / interfaces

Hello all, I've been playing with the dynamic routing protocol OSPF on RouterOS for a while and I noticed that my OSPF routes and interfaces are listed as "dynamic". Also I see that the interface used in these directories is "bridge-local". Why is this and how can I do something about it? See follow...
by Beelze
Wed May 28, 2014 1:46 pm
Forum: General
Topic: RouterOS default configuration
Replies: 8
Views: 1110

Re: RouterOS default configuration

janisk, thanks a lot for replying to my posts. This will help me a lot in my project :)
by Beelze
Wed May 28, 2014 1:06 pm
Forum: General
Topic: RouterOS default configuration
Replies: 8
Views: 1110

Re: RouterOS default configuration

you can use wine to run netinstall tool.
I can use wine on the Linux server (ubuntu server 12.04 LTS)?
by Beelze
Wed May 28, 2014 12:06 pm
Forum: General
Topic: RouterOS default configuration
Replies: 8
Views: 1110

Re: RouterOS default configuration

Also, if router comes in new, usually it is set up to boot with flashfig enabled. That might help you a bit. Hmm, this could be something I can use. I see that you need a windows computer with Netinstall/Flashfig installed. I don't use anything that is windows based. My current setup is that I have...
by Beelze
Wed May 28, 2014 11:19 am
Forum: General
Topic: RouterOS default configuration
Replies: 8
Views: 1110

Re: RouterOS default configuration

You really need to add a rule that specifically allows your API server to talk to the MT, not the whole world. Oh sure, I will do that then. Ideally I was looking for a way to configure the router with just the use of the dhcp client on ether1 and the API server without going into the CLI. But I gu...
by Beelze
Tue May 27, 2014 2:27 pm
Forum: Scripting
Topic: import and fetch via API
Replies: 17
Views: 6536

Re: import and fetch via API

I have done the same thing, but then with the 2nd API you listed. Separately, both commands work perfectly. But after putting them together after each other, nothing works. //fetch configuration file from server $API->write('/tool/fetch', false); $API->write('=address=address', false); $API->write('...
by Beelze
Tue May 27, 2014 12:13 pm
Forum: Scripting
Topic: PHP API class connect to remote router
Replies: 3
Views: 1737

Re: PHP API class connect to remote router

I have added this line of code: $API->write('/import config.rsc'); It seems like my code works fine as i get back this array: /import config.rsc >>> [3/3] bytes read. >>> [3, 20]!re >>> [18/18] bytes read. >>> [18, 1]=status=connecting >>> [3/3] bytes read. >>> [3, 18]!re >>> [16/16] bytes read. >>>...
by Beelze
Tue May 27, 2014 10:30 am
Forum: General
Topic: RouterOS default configuration
Replies: 8
Views: 1110

RouterOS default configuration

I got the PHP API working yesterday after changing 4 ;;; default configuration chain=input action=drop in-interface=ether1-gateway to 4 ;;; default configuration chain=input action=accept in-interface=ether1-gateway I was hoping I could load configuration files into the router with the API without h...
by Beelze
Mon May 26, 2014 5:20 pm
Forum: Scripting
Topic: PHP API class connect to remote router
Replies: 3
Views: 1737

Re: PHP API class connect to remote router

Forgot to remove the last 'false' boolean, works perfectly now :)
by Beelze
Mon May 26, 2014 3:58 pm
Forum: Scripting
Topic: PHP API class connect to remote router
Replies: 3
Views: 1737

Re: PHP API class connect to remote router

I have used this line of code so far: <?php require('routeros_api.class.php'); $API = new routeros_api(); $API->debug = true; if ($API->connect('address', 'admin', 'password!')) { $API->write('/tool/fetch', false); $API->write('=address=address', false); $API->write('=src-path=file.conf', false); $A...
by Beelze
Mon May 26, 2014 11:21 am
Forum: Scripting
Topic: PHP API class connect to remote router
Replies: 3
Views: 1737

PHP API class connect to remote router

Hello all,

I've been trying out the RouterOS PHP API class to connect to my RB2011 router.

I have a ubuntu 12.04 LTS server that needs to connect to the router through this API. However, both the server and the router are on different networks.

How do I do this?
by Beelze
Fri May 23, 2014 5:47 pm
Forum: General
Topic: RouterOS DHCP-client options
Replies: 2
Views: 1667

Re: RouterOS DHCP-client options

What I want in the end is have the RB2011 router connect to a DHCP server and get the name and location of a configuration file.

This file needs to be executed on the RB2011 and ready for use.

Can this be done without ever touching the RB2011? I have seen it on other vendors.
by Beelze
Fri May 23, 2014 2:02 pm
Forum: General
Topic: RouterOS DHCP-client options
Replies: 2
Views: 1667

Re: RouterOS DHCP-client options

I've added the following lines in my /etc/dhcp/dhcpd.conf file: if exists dhcp-parameter-request-list { append dhcp-parameter-request-list 1,3,6,33,42,66,67,121; } The Parameter Request List in the DHCP Request from the RB2011 doesn't include option 66 and 67. The DHCP ACK actually does give the cor...
by Beelze
Fri May 23, 2014 12:28 pm
Forum: General
Topic: RouterOS DHCP-client options
Replies: 2
Views: 1667

RouterOS DHCP-client options

I installed an isc-dhcp-server on ubuntu dekstop 12.04 to provide DHCP information to a RB2011. I want this dhcp server to provide the following information - IP-address; - tftp server name; - bootfile name; - hostname dhcp-server; My /etc/dhcp/dhcpd.conf file: subnet 192.168.1.0 netmask 255.255.255...
by Beelze
Tue May 20, 2014 4:28 pm
Forum: General
Topic: RouterOS and bootstrap protocol (BOOTP)
Replies: 1
Views: 1897

Re: RouterOS and bootstrap protocol (BOOTP)

My DHCP server should provide an IP-address and the name and location of the boot/configuration file for the RB2011.

How does RouterOS handle this, and if above statement is possible can anyone show me how this is done?
by Beelze
Tue May 20, 2014 1:48 pm
Forum: General
Topic: RouterOS and bootstrap protocol (BOOTP)
Replies: 1
Views: 1897

RouterOS and bootstrap protocol (BOOTP)

I have got a RB2011 where the ether1 interface is a dhcp client. My question is: can my router with RouterOS work with the bootstrap protocol? I need it to retrieve all the necessary information such as an IP-address and name and location of a bootfile. My DHCP server is on a ubuntu server. It shoul...
by Beelze
Mon May 19, 2014 5:27 pm
Forum: Scripting
Topic: startup script
Replies: 2
Views: 1211

Re: startup script

I think I found the problem. I defined the continue variable as :local instead of :global.
by Beelze
Mon May 19, 2014 4:41 pm
Forum: Scripting
Topic: startup script
Replies: 2
Views: 1211

Re: startup script

It seems like the while loop is ignored and the statements in that scope aren't executed when I schedule the script at startup.
by Beelze
Mon May 19, 2014 3:53 pm
Forum: Scripting
Topic: startup script
Replies: 2
Views: 1211

startup script

Following script runs at startup. Everything works, except the part where i resolve www.google.nl and where it should run the next script. When i run it from the CLI, the whole script works. Any suggestions? #define global variables :global resolveThis "www.google.nl" :global test :global serverfile...
by Beelze
Wed May 07, 2014 10:50 am
Forum: Scripting
Topic: statements to run after DHCP IP-address
Replies: 10
Views: 1545

Re: statements to run after DHCP IP-address

Resolved domain is stored in dns cache.
Right, but I if don't use netwatch, i want to check connectivity live. Using the dns cache is not exactly live.
by Beelze
Wed May 07, 2014 10:21 am
Forum: Scripting
Topic: statements to run after DHCP IP-address
Replies: 10
Views: 1545

Re: statements to run after DHCP IP-address

Yea, i need something like that. I still wonder why resolving a domain is not stored in the variable.
by Beelze
Tue May 06, 2014 6:31 pm
Forum: Scripting
Topic: statements to run after DHCP IP-address
Replies: 10
Views: 1545

Re: statements to run after DHCP IP-address

Ahh, that is very clever, I will try that out, thx for your response!
by Beelze
Tue May 06, 2014 6:18 pm
Forum: Scripting
Topic: statements to run after DHCP IP-address
Replies: 10
Views: 1545

Re: statements to run after DHCP IP-address

Thx, but it does the same thing. I've seen this somewhere else, but then with ping. Same result though.
by Beelze
Tue May 06, 2014 5:50 pm
Forum: Scripting
Topic: statements to run after DHCP IP-address
Replies: 10
Views: 1545

Re: statements to run after DHCP IP-address

i want to do something like this:

:global test
:set test [resolve www.google.nl]
:put $test

nothing is stored in - test - ..
by Beelze
Tue May 06, 2014 4:41 pm
Forum: Scripting
Topic: statements to run after DHCP IP-address
Replies: 10
Views: 1545

statements to run after DHCP IP-address

I have a CPE with a script that runs when powered on. Ether1 is a DHCP client that gets an IP-address from a DHCP server. What I want to accomplish is that the script only continues when it can reach the internet on ether1. After being able to connect to the internet, the CPE needs to download a fil...
by Beelze
Tue May 06, 2014 12:32 pm
Forum: General
Topic: Auto configuration via DHCP
Replies: 2
Views: 1158

Re: Auto configuration via DHCP

Thanks for your reply!
by Beelze
Thu May 01, 2014 2:02 pm
Forum: General
Topic: Auto configuration via DHCP
Replies: 2
Views: 1158

Auto configuration via DHCP

Hello,

Is it possible to let a DHCP server send all the necessary information to a router with RouterOS so that this router knows where to find its configuration file on a TFTP server? I've seen that this is possible with other brands without ever touching the CLI of RouterOS.
by Beelze
Tue Apr 29, 2014 10:35 am
Forum: General
Topic: import config files via DHCP
Replies: 5
Views: 1322

Re: import config files via DHCP


I was playing around with exactly this idea last friday - and experienced that scripts named xxx.auto.rsc are NOT automatically executed when fetched by the receiving router.
It should be working according to other posts. I guess it's a bug or something, luckily there's a way around it.
by Beelze
Mon Apr 28, 2014 4:30 pm
Forum: General
Topic: import config files via DHCP
Replies: 5
Views: 1322

Re: import config files via DHCP

I have no experience with netwatch up-scripts. I'll look it up. However, with scheduling a script on startup I think I can achieve what I want. I don't want to do too much on the router because the idea is to place multiple routers at multiple customer premises and have them pull files from one serv...
by Beelze
Mon Apr 28, 2014 4:13 pm
Forum: General
Topic: import config files via DHCP
Replies: 5
Views: 1322

Re: import config files via DHCP

Thanks for your reply. I might have been unclear in my first post here, sorry about that :) That is one way to upload configuration files to a remote router. But as I can see in the Tools/Fetch manual you can also retrieve files with ftp from an FTP server that doesn't need to be a device with Route...
by Beelze
Mon Apr 28, 2014 3:20 pm
Forum: General
Topic: import config files via DHCP
Replies: 5
Views: 1322

import config files via DHCP

Dear, I would like to know if there's a possibility to import configuration files into a router with RouterOS. What I would like to do is have the router automatically connect to a DHCP server and have this server push a configuration file back to the router. Is this possible or is there another way...
by Beelze
Thu Mar 27, 2014 11:44 am
Forum: Forwarding Protocols
Topic: Layer 3 VPN
Replies: 1
Views: 1215

Re: Layer 3 VPN

Update: the Juniper CE1 can now see the 10.1.1.0/24 network which is imported from BGP into OSPF. The PE2 (RouterOS) can see the 10.8.8.0/24 network in its own routing table. This one is also shown in the /routing bgp vpnv4-route table: [admin@MikroTik] > /routing bgp vpnv4-route print Flags: L - la...
by Beelze
Wed Mar 26, 2014 3:51 pm
Forum: Forwarding Protocols
Topic: Layer 3 VPN
Replies: 1
Views: 1215

Layer 3 VPN

I'm trying to setup a Layer 3 VPN between a Juniper PE and a Mikrotik PE Router. My current topology: CE1 (Juniper) -- PE1 (Juniper) -- P1 (RouterOS) -- P2 (RouterOS) -- PE2 (RouterOS) -- CE2 (RouterOS) I'm running > OSPF on CE1-PE1 and CE2-PE2. > OSPF between PE1 and PE2. > BGP between PE1 and PE2....
by Beelze
Tue Mar 04, 2014 1:03 pm
Forum: Scripting
Topic: Scripting editor
Replies: 5
Views: 3214

Re: Scripting editor

I use notepad.
Right, I thought of using something like that.
by Beelze
Tue Mar 04, 2014 12:55 pm
Forum: Scripting
Topic: Scripting editor
Replies: 5
Views: 3214

Scripting editor

As i have just purchased a RB2011U series Mikrotik router, i got a bit into the scripting language of RouterOS. I was wondering if there is a better way of writing scripts than to write every line of the code in the CLI. What do you guys use for third party programs to write these scripts and then j...