Yes we are distributor, and we have 2 packages old series not open and we ask for change it, but your colleagues give us answer what you send for us palstic for change.Colleagues? Are you a distributor ?
Sorry my fault ...OK, but how to create EoIP tunnel without public IP on one mikrotik?
SIP Direct Media appeared only in 6.20, You need more accurate read my question ...This 'new' option exists even in ROS 5.x and is described here:
http://wiki.mikrotik.com/wiki/Manual:IP ... vice_Ports
Be sure - exist! For expamle -Fritz!Box ... In Germany, Latvia some providers use this devices ...(except obviously, if is exist, one router with integrated ATA).
/ip route rule add src-address=192.168.0.0/24 dst-address=192.168.10.0/24 action=drop
ip firewall nat add chain=dstnat dst-address=22.214.171.124 action=netmap to-address=192.168.88.133
add action=dst-nat dst-address=your.wan.ip.address chain=dstnat comment="Redirect SBNET TELECOM VM thunder" dst-port=82 protocol=tcp to-addresses=192.168.45.11 to-ports=8291
.... hmmm .... try to disable sip-helper ... ip firewall service port ... but remember for working need reboot ...From some other threads it sounds like the issue people are having with SIP, only I don't think I can use the SIP helper to resolve this.
Yes you right - my mistake ... sorryYou mean like /interface wireless registration-table get value-name=signal-strength?
rextendedSearch on my other post how configure 2.4GHz AP and read why is needed that settings...