Community discussions

Search found 33 matches

by yHuKyM
Mon Oct 21, 2019 5:31 pm
Forum: RouterBOARD hardware
Topic: RB1100x4
Replies: 5
Views: 728

Re: RB1100x4

Use any esp controller. D1 mini is probably the cheapest, combined with PIR sensor and magnetic switch for the door will cost less than $10.
by yHuKyM
Fri Aug 16, 2019 5:22 pm
Forum: RouterBOARD hardware
Topic: RB5011
Replies: 5
Views: 1173

Re: RB5011

And please, bring back the variants with touch LCD displays (yes, I actually use the LCD).
I avoid upgrading all my 3011s just because there is nothing newer with LCD.
by yHuKyM
Sat Jun 29, 2019 12:40 am
Forum: RouterBOARD hardware
Topic: SXTSQ Lite 2 with no clear Line of Sight
Replies: 3
Views: 928

Re: SXTSQ Lite 2 with no clear Line of Sight

70 meters? Dig a shallow ditch and lay a cable. Or use some Poweline devices.
by yHuKyM
Fri Feb 22, 2019 4:27 pm
Forum: RouterBOARD hardware
Topic: RB1000
Replies: 1
Views: 441

Re: RB1000

Have you tried to connect via the serial console port?
Have you tried Netinstall? https://wiki.mikrotik.com/wiki/Manual:Netinstall
by yHuKyM
Wed Jan 09, 2019 9:44 am
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 73456

Re: RB4011

Today I received my new rb4011 with wifi. Apart from the previously mentioned subjects (usb and lcd) it does not have a beeper either
And user LED :(
by yHuKyM
Wed Dec 05, 2018 5:28 pm
Forum: RouterBOARD hardware
Topic: RB3011 cannot reach 500mb/s troughput
Replies: 17
Views: 2037

Re: RB3011 cannot reach 500mb/s troughput

all ethernets are "only hardware queue";
the bonding interface shows as "no queue".
What about the SFP port?
by yHuKyM
Wed Dec 05, 2018 1:44 pm
Forum: RouterBOARD hardware
Topic: RB3011 cannot reach 500mb/s troughput
Replies: 17
Views: 2037

Re: RB3011 cannot reach 500mb/s troughput

What is the output of:
/queue interfaces print
by yHuKyM
Tue Dec 04, 2018 10:48 am
Forum: RouterBOARD hardware
Topic: RB3011 cannot reach 500mb/s troughput
Replies: 17
Views: 2037

Re: RB3011 cannot reach 500mb/s troughput

Hi, i have a setup where i cannot make RB3011's troughput go over 400mbps... It doesn't look like you can specify which switch ports will work with particular CPU. Both CPUs have connection to both switches. https://i.mt.lv/cdn/rb_files/RB3011UiAS-160307123613.png And It looks like all the traffic ...
by yHuKyM
Fri Oct 05, 2018 10:09 am
Forum: RouterBOARD hardware
Topic: RB4011 with POE Out
Replies: 3
Views: 1140

Re: RB4011 with POE Out

This is a router and not a switch, so every port would make less sense. Still though, one switch group can have PoE out for 5 devices.
by yHuKyM
Tue Oct 02, 2018 4:22 pm
Forum: RouterBOARD hardware
Topic: How to check if Mikrotik was previously used or repaired
Replies: 1
Views: 667

Re: How to check if Mikrotik was previously used or repaired

You probably got a unit that has been QA-ed before leaving the factory.
by yHuKyM
Fri Aug 31, 2018 11:24 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 73456

Re: RB4011

??
none of them actually exist..
Well, not true, I got the 1100 right :D
Fixed them.
by yHuKyM
Fri Aug 31, 2018 4:53 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 371
Views: 73456

Re: RB4011

I was planning to upgrade my 2011s and 3011s, but the lack of USB and LCD is a deal breaker for me.
I didn't get the 1100, and it looks I will pass on the 4011 too. Will stick with the 2011 and 3011 untill I can.

edit: fixed model numbers
by yHuKyM
Thu Aug 23, 2018 10:23 am
Forum: RouterBOARD hardware
Topic: When will be RB3011UiAS-2HnD-IN available?
Replies: 65
Views: 20130

Re: When will be RB3011UiAS-2HnD-IN available?

I see a bad trend with the latest devices. No LCD on 1100AHx4, and none is visible on the 4100. Shame.
by yHuKyM
Fri Aug 10, 2018 4:13 pm
Forum: RouterBOARD hardware
Topic: No CRS with redundand power?
Replies: 6
Views: 800

Re: No CRS with redundand power?

Unfortunately this is not a good option. The upgrade is too small and the traffic will hopefully get bigger.
It's not so small. Pure math:
CCR1009 has 9 cores 1GHz = 9GHz
CCR1016 has 16 cores 1.2GHz = 19,2GHz
(19,2 - 9) / 9 = 113% more.
by yHuKyM
Thu Aug 09, 2018 11:57 pm
Forum: RouterBOARD hardware
Topic: No CRS with redundand power?
Replies: 6
Views: 800

Re: No CRS with redundand power?

... It looks like there will be a number of CCRs in Bulgarian OLX soon :) I don't mind getting a cheap CCR :) 1U server with additional NICs and RouterOS? Is it possible to aggregate your connections on a switch, then 2x10gbit LACP to ccr1072 by VLAN? Though you may not like the power consumption.
by yHuKyM
Thu Aug 09, 2018 3:09 pm
Forum: RouterBOARD hardware
Topic: No CRS with redundand power?
Replies: 6
Views: 800

Re: No CRS with redundand power?

If your load is not predicted to increase A LOT in the foreseeable future, get one CCR1016-12S-1S+ with the SFP modules and see how it goes.
by yHuKyM
Tue Aug 07, 2018 9:19 am
Forum: RouterBOARD hardware
Topic: CCR1009-7G-1S-1C+PC Problem OverHeat [SOLVED]
Replies: 12
Views: 1589

Re: CCR1009-7G-1S-1C+PC Problem OverHeat [SOLVED]

You have a faulty cable/jack/patch panel or something else. IP addresses and connectivity in general don't care about temperatures.
by yHuKyM
Wed Jul 11, 2018 11:29 am
Forum: RouterBOARD hardware
Topic: RB3011 Switching Performance with Hardware Offloading
Replies: 11
Views: 7362

Re: RB3011 Switching Performance with Hardware Offloading

There is always a third option :). ... For 6-8 ports... You can always: Configure 2 separate bridges (ports 1-5 and 6-10), each with hw-offload Configure everything (VLANs, IP addresses, etc.) on the first bridge Connect ports 5 and 6 with a short cable 8) Now you have ports 1,2,3,4,7,8,9,10 workin...
by yHuKyM
Tue Jul 03, 2018 3:55 pm
Forum: RouterBOARD hardware
Topic: CRS125 Randomly ALL ports switch off then on?
Replies: 8
Views: 1127

Re: CRS125 Randomly ALL ports switch off then on?

Any entries in the log?
by yHuKyM
Tue Jul 03, 2018 12:15 pm
Forum: RouterBOARD hardware
Topic: Mikrotik LDF 2 frequency band
Replies: 4
Views: 695

Re: Mikrotik LDF 2 frequency band

I am interested in this setup as well. Unfortunately, I am unable to find clear statement about recent 2GHz products and superchannel capabilities. Some of them are not in this list (LDF 2 is a good example).

https://wiki.mikrotik.com/wiki/Manual:I ... ware_table
by yHuKyM
Fri Mar 30, 2018 12:13 am
Forum: General
Topic: Router + switch + ap all in one solution
Replies: 15
Views: 1445

Re: Router + switch + ap all in one solution

RB1100 would also fit. But it has features that are of no use to me in this case like PoE, redundant power (so fans - noise) microSD storage and so on. Yeah..its place is in a rack not on a desktop. What I would like is a passive cooled one on a desktop but with those specs more or less :) RB1100AH...
by yHuKyM
Thu Mar 29, 2018 2:45 pm
Forum: General
Topic: Router + switch + ap all in one solution
Replies: 15
Views: 1445

Re: Router + switch + ap all in one solution

Yes, the ISP line comes with media convertor. Thx for the suggestion but rb1100ahx4 is too expensive for what I'm trying to achieve. I was thinking maybe go with a home use router like maybe RB750 Gr3 which can do hardware IP Sec and has a pretty powerful CPU or the hAP ac as a router and then buy ...
by yHuKyM
Thu Mar 29, 2018 9:57 am
Forum: General
Topic: Router + switch + ap all in one solution
Replies: 15
Views: 1445

Re: Router + switch + ap all in one solution

If the fiber line comes with ISP provided media converter, then I would consider this:
https://mikrotik.com/product/rb1100ahx4
Use port #13 for WAN, and ports 1-10 for LAN.

And for WiFi - Either the new cAP devices, or UAP-AC-xxxx from Ubiquiti.
by yHuKyM
Thu Mar 22, 2018 8:56 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition
Replies: 52
Views: 12483

Re: RB1100AHx4 Dude Edition

1100AHx4 would be the best fit, if it had the SFP port, the LCD and the USB. The lack of SFP is particularly strange. Then noone will buy CCRs, so this is the market question I suppose. Not sure about that. CCR has no switch chip and each interface is directly connected to the CPU. When routing bet...
by yHuKyM
Wed Mar 21, 2018 5:01 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition
Replies: 52
Views: 12483

Re: RB1100AHx4 Dude Edition

1100AHx4 would be the best fit, if it had the SFP port, the LCD and the USB. The lack of SFP is particularly strange.
by yHuKyM
Thu Mar 01, 2018 1:28 pm
Forum: General
Topic: /ip cloud (ddns + time) = Error: request timed out (90% of time)
Replies: 9
Views: 9678

Re: /ip cloud (ddns + time) = Error: request timed out (90% of time)

Did you try to clear DNS cache? 91.188.51.139 does not exist anymore and cloud.mikrotik.com is resolved to 81.198.87.240 When did you guys remove 91.188.51.139 from the DNS server? Yesterday I rebooted 2 routers because of upgrade to 6.41.2 (which should have cleared the DNS cache) and the routers ...
by yHuKyM
Wed Feb 28, 2018 4:23 pm
Forum: General
Topic: /ip cloud (ddns + time) = Error: request timed out (90% of time)
Replies: 9
Views: 9678

Re: /ip cloud (ddns + time) = Error: request timed out (90% of time)

Just wrote to support@mikrotik.com about that too. From my investigation on the issue, it looks like the DDNS service connects to 82.198.87.240 or 91.188.51.139. However, 91.188.51.139 is unreachable due to network loop on their (or their provider's) side: output: in:(unknown 0) out:wan proto UDP, 9...
by yHuKyM
Thu Jan 05, 2017 1:41 pm
Forum: General
Topic: Feature Req: IKEv2 server and client
Replies: 291
Views: 81922

Re: Feature Req: IKEv2 server and client

I am unable to set up ike2 with google cloud and multiple subnets. ... Only the first subnet shows as "established". The rest are "no phase2". This works with linux box and Strongswan. set level=unique for each policy Same thing. Though, now the second subnet is established, the first and the rest ...
by yHuKyM
Wed Jan 04, 2017 12:25 pm
Forum: General
Topic: Feature Req: IKEv2 server and client
Replies: 291
Views: 81922

Re: Feature Req: IKEv2 server and client

I am unable to set up ike2 with google cloud and multiple subnets. ... Only the first subnet shows as "established". The rest are "no phase2". This works with linux box and Strongswan. set level=unique for each policy Same thing. Though, now the second subnet is established, the first and the rest ...
by yHuKyM
Wed Jan 04, 2017 10:21 am
Forum: General
Topic: Feature Req: IKEv2 server and client
Replies: 291
Views: 81922

Re: Feature Req: IKEv2 server and client

I am unable to set up ike2 with google cloud and multiple subnets. /ip ipsec peer add address=GOOGLEIP dpd-interval=disable-dpd enc-algorithm=aes-256,3des exchange-mode=ike2 local-address=LOCALIP nat-traversal=yes secret=SECRET /ip ipsec policy add dst-address=10.0.1.0/24 proposal=default sa-dst-add...
by yHuKyM
Tue Aug 17, 2004 4:12 am
Forum: General
Topic: Broken Links
Replies: 4
Views: 2021

It got fixed few hours after I posted :)
by yHuKyM
Mon Aug 16, 2004 11:01 am
Forum: General
Topic: Broken Links
Replies: 4
Views: 2021

Whatever I do I cannot get the PDF docs for the 2.8. I use the link http://www.mikrotik.com/docs/ros/2.8/co ... rOS2_8.pdf from the Documentation page:
http://www.mikrotik.com/documentation.html