Community discussions

Search found 131 matches

by genesispro
Wed Sep 11, 2019 12:01 pm
Forum: RouterOS v7 BETA
Topic: cAP ac: no capsman [SOLVED]
Replies: 9
Views: 1290

Re: cAP ac: no capsman [SOLVED]

same here 3011 capsman v7 >> cap clients on hapac latest v6 not associating also with certificates
so we have to wait for a mips v7 I guess
sounds like capsman v3 which is not compatible with capsman v2
by genesispro
Sat Sep 07, 2019 12:02 am
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 179
Views: 31025

Re: RouterOS v7.0beta1 (ARM)

another issue... that I created a workaround ppoe client (to the ISP) connects but the route that it is adding is not working... I had to create and run the following script to add a proper route that works /ip/route/set [find where comment="pppoe"] gateway=([:pick [/ip/address/print as-value where ...
by genesispro
Fri Sep 06, 2019 10:53 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 179
Views: 31025

Re: RouterOS v7.0beta1 (ARM)

I upgraded my RB3011UiAS fine...
poe out on port10 is not recognized as poe and not working as poe
Capsman server is not working... clients won't connect... clients are all hapAC so I can't upgrade them to v7 too
CAP faild to join router .... handshake failed: error 140870e8 (6)
by genesispro
Fri Sep 06, 2019 3:53 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 152825

Re: RouterOS v7.0 beta1 - when?

anyone installed it on a 4011 yet?
Yup. Got 1 kernel panic so definitely would run this in lab only
and you flashed it back to 6.x?
by genesispro
Fri Sep 06, 2019 3:02 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 152825

Re: RouterOS v7.0 beta1 - when?

anyone installed it on a 4011 yet?
by genesispro
Fri Aug 09, 2019 6:09 pm
Forum: Announcements
Topic: v6.46beta [testing] is released!
Replies: 89
Views: 28149

Re: v6.46beta [testing] is released!

winbox - added "https-redirect" parameter to "IP/Hotspot/Profiles menu"; ????
That could be something very promising ... but is it?
Any information about it?
by genesispro
Wed Jul 10, 2019 9:17 pm
Forum: General
Topic: Bonding-alb over eoip doesn't seem to work to bond asymmetric lines
Replies: 2
Views: 359

Bonding-alb over eoip doesn't seem to work to bond asymmetric lines

I have 2 WANs with eoip tunnels to a chr in a datacenter. I created a bonding interface on both ends with the 2 eoip interface in order to aggregate traffic via the datacenter. balance-rr is working fine balancing data across lines but I want to achieve bonding to asymmetric lines too so theoretical...
by genesispro
Fri Jul 05, 2019 11:24 pm
Forum: General
Topic: special route for l2tp client
Replies: 1
Views: 184

special route for l2tp client

I want to be able to select a certain gateway/route on certain l2tp client. I am trying to make 2 l2tp connections to 1 ip on a mikrotik running on datacenter. I have 2 Wan interfaces (2 ISPs) and I want each of the l2tp to use each of the WANs that I have to connect to my datacenter. I cannot use t...
by genesispro
Mon Jun 17, 2019 4:27 pm
Forum: General
Topic: Cannot add SSTP interface to a bridge [SOLVED]
Replies: 1
Views: 189

Re: Cannot add SSTP interface to a bridge [SOLVED]

my bad I forgot I had to add an eoip to add it to the bridge
by genesispro
Mon Jun 17, 2019 4:22 pm
Forum: General
Topic: Cannot add SSTP interface to a bridge [SOLVED]
Replies: 1
Views: 189

Cannot add SSTP interface to a bridge [SOLVED]

I used to be able to add an sstp interface to a bridge in order to get an "internal" IP from a remote network. I don't have that choice anymore. I tried adding it to an interface list and then add it to the brigde, which I am allowed but this doesn't work. I am using it to get an "internal" ip from ...
by genesispro
Thu Feb 28, 2019 11:48 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 152825

Re: RouterOS v7.0 beta1 - when?

out of curiosity...
which are the key features that the new kernel has that they cannot use at the moment in this kernel?

In other words what would make a big difference (feature or improvement) and CANNOT be implemented in the current kernel?

I am not questioning, I am wondering
by genesispro
Thu Feb 14, 2019 10:56 am
Forum: General
Topic: Guide to (possibly) hack RouterOS ... If yes please protect it
Replies: 10
Views: 961

Re: Guide to (possibly) hack RouterOS ... If yes please protect it

Since I am not an expert I added the "possibly" word... No matter what it is better to know the "enemy" rather than ignore him... Since this forum is to share our knowledge and findings to improve this wonderful product I posted it. I hope it helps, sorry if it had been re-posted but I cannot read A...
by genesispro
Thu Feb 14, 2019 7:36 am
Forum: General
Topic: Guide to (possibly) hack RouterOS ... If yes please protect it
Replies: 10
Views: 961

Guide to (possibly) hack RouterOS ... If yes please protect it

https://medium.com/tenable-techblog/mak ... 0705459bc6

I am posting for admins to protect the system more if needed.

I couldn't follow it thoroughly to know if indeed it actually works, but it sounded real
by genesispro
Thu Jan 17, 2019 1:54 pm
Forum: General
Topic: v7 routeros
Replies: 12
Views: 3108

Re: v7 routeros

routerOS7 in Greek too: ρούτερΟΣ7
by genesispro
Sun Dec 23, 2018 11:40 am
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 33088

Re: v6.43.8 [stable] is released!

"wireless - improvements in wireless frequency selection;"
Can you be more specific?
I think in the past it was only counting the count and not the quality of a frequency, now?
by genesispro
Wed Aug 08, 2018 1:35 pm
Forum: Announcements
Topic: Winbox v3.17 released!
Replies: 17
Views: 9033

Re: Winbox v3.17 released!

I still get it every time.

If I use the other winbox window and press connect it connects.

When I press the reconnect the last thing I see is logging in... then it fades out. Sometimes it returns to reconnect but still doesn't connect or not show up at all
by genesispro
Wed Aug 08, 2018 12:55 pm
Forum: General
Topic: DPK package is not deleted after boot/installation
Replies: 0
Views: 295

DPK package is not deleted after boot/installation

In version 6.42.6 (maybe earlier) I noticed that the .dpk file that we brand our mikrotiks does not auto delete after boot/installation.

I believe that it should
by genesispro
Wed Aug 08, 2018 12:44 pm
Forum: Announcements
Topic: Winbox v3.17 released!
Replies: 17
Views: 9033

Re: Winbox v3.17 released!

If I get disconnected for example due to reboot I cannot reconnect... I need to open a new winbox session and press connect and then it works.
Pressing the reconnect button looks like it is logging in and fails
by genesispro
Fri Aug 03, 2018 10:17 am
Forum: General
Topic: Dude - changed default port - links and routeros info not working
Replies: 1
Views: 297

Re: Dude - changed default port - links and routeros info not working

also after changing the default winbox port the ros_command is not working

as I mentioned also earlier I have modified the routeros management probe port to the new port that I am using

any help appreciated
by genesispro
Mon Jul 30, 2018 5:06 pm
Forum: General
Topic: Dude - changed default port - links and routeros info not working
Replies: 1
Views: 297

Dude - changed default port - links and routeros info not working

after I modified all of my routeros devices to a non default winbox port the links between the devices using routeros and the routeros info tab are not working.

I have modified the probe "routeros management" port to the one that I am using but still no luck.

what could I do to fix it?
by genesispro
Thu Jul 26, 2018 2:23 pm
Forum: Scripting
Topic: Mikrotik.php file scripts
Replies: 26
Views: 9846

Re: Mikrotik.php file scripts

I used the following command in the dude to fix the sock changes made [ros_command("/ip socks set enabled=no port=1080")] I am also trying to enable all drop firewalls using [ros_command("/ip firewall filter enable [/ip firewall filter find where action=drop]")] but it doesn't work. Anyone knows why...
by genesispro
Wed Jul 25, 2018 10:01 pm
Forum: General
Topic: Router compromised [SOLVED]
Replies: 21
Views: 4847

Re: Router compromised [SOLVED]

I also got it and telnet,ssh,www service where disabled
even to version 6.41.3
which version is affected and how is it injected?
by genesispro
Wed Jul 11, 2018 3:09 pm
Forum: Wireless Networking
Topic: LtAP mini LTE kit and Wap LTE Kit are M2M compatible?
Replies: 1
Views: 458

LtAP mini LTE kit and Wap LTE Kit are M2M compatible?

I am looking for M2M (machine to machine) compatible devices for mikrotiks.

Does the ltap mini LTE or the WAP LTE Kits are compatible?

If not does anyone have some more experience with such a product?

Thank you in advance
by genesispro
Tue Jul 10, 2018 1:50 pm
Forum: General
Topic: Feature requests
Replies: 1159
Views: 205405

Re: Feature requests

Well I use winbox and/or API so with neither I could do it remotely since I would loose at the first step the remote connection I would also like to be possible to set winbox to a state where changes are pending and the moment all changes done to be able to say commit. If for example we have the wan...
by genesispro
Tue Jul 10, 2018 1:19 pm
Forum: General
Topic: Feature requests
Replies: 1159
Views: 205405

Re: Feature requests

I would also like to be possible to set winbox to a state where changes are pending and the moment all changes done to be able to say commit. If for example we have the wan port in a bridge with a dhcp-client on the bridge and the we want to remove it from the bridge remotely and add the dhcp-client...
by genesispro
Tue Jun 19, 2018 3:13 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

I reset it and now it works...
weird because the password is saved as a favorite in winbox so I wasn't typing anything wrong earlier... and right before the update I used the same favorite to login to it and update it!
by genesispro
Tue Jun 19, 2018 2:33 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

I am directly attached to it and still it doesn't work
I upgraded to 6.43rc32 and even using winbox 3.15 login fails!
look problem on your network, for me works fine.
by genesispro
Tue Jun 19, 2018 2:19 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

I upgraded to 6.43rc32 and even using winbox 3.15 login fails!
by genesispro
Fri Jun 08, 2018 11:22 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

I just found another "issue" with the latest version 6.43rc23 the custom default config that I have using the branding tool gets erased. It resets to mikrotik's defaults. Even after I downgrade to stable 6.42.3 and reset it again the default configuration of mikrotik comes up... with the previous rc...
by genesispro
Fri Jun 01, 2018 3:44 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

You don't have to check version. * Send /login with username and password in plain text * if response is with challenge then fall back to old login method * otherwise check status if login is successful As an example see how it is done on python example in the wiki check version one would need if h...
by genesispro
Fri Jun 01, 2018 1:35 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

Could anyone give an example of how to connect in the api PHP in the new version of mikrotik v3.43rc21 https://wiki.mikrotik.com/wiki/Manual:API#Initial_login I modified the php file for now this way and it works... it is not detecting prior version... I hope 6.43 comes out soon to keep it like tha...
by genesispro
Tue May 29, 2018 12:43 pm
Forum: Announcements
Topic: Winbox 3.14 released!
Replies: 77
Views: 24635

Re: Winbox 3.14 released!

Man in the middle attack is not possible, because

*) WinBox now uses ECSRP for key exchange and authentication (requires new winbox version),
both sides now verify that other side knows password (no man in the middle attack is possible anymore);
Nice. Can we see SRP in API login?
+1
by genesispro
Fri May 25, 2018 2:42 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

Basically the last two RouterOS versions have been released for testing purposes for everything besides Winbox. We are working on a new Winbox version and have provided rc version earlier within this topic. When 6.43 and Winbox 3.14 will be released, then both of them will work together just fine. ...
by genesispro
Fri May 25, 2018 2:29 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

I have a feeling that the API calls cannot authenticate now! API authentication method have changed, see API manual: https://wiki.mikrotik.com/wiki/Manual:API#Initial_login I modified it and it seams to work but.... One of my first commands is to modify the username and password but I get a failure...
by genesispro
Thu May 24, 2018 8:04 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

Did anyone manage to use api calls with this version? My php api fails to login (similar to the winbox problem)
by genesispro
Thu May 24, 2018 12:40 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

I have a feeling that the API calls cannot authenticate now!
by genesispro
Thu May 24, 2018 11:31 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

Link to Winbox rc is in the above post, where RC is announced. Please all read the posts. It is not that hard. Indeed it was there, it does work... Thank you It is indeed not that hard but some times we are not given the "gift of time" to read all pages of all posts. I would try to edit and stick i...
by genesispro
Thu May 24, 2018 11:04 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 111885

Re: v6.43rc [release candidate] is released!

same issue here that couldn't login after upgrade... I also used the old winbox and it worked. I don't know where to download winbox 3.14 rc
by genesispro
Sat May 19, 2018 9:47 pm
Forum: Scripting
Topic: SMS delivery notifications
Replies: 1
Views: 605

SMS delivery notifications

I have created an SMS gateway with a mikrotik and I am using API calls to send smses. I have a problem where if a number is not totally wrong I don't get an error while sending it. Even if a number is short by 1 digit it won't look failed! I want to be able to receive a delivery notification if poss...
by genesispro
Tue May 08, 2018 5:52 pm
Forum: General
Topic: sstpc - ubuntu - sspt client - error
Replies: 2
Views: 562

Re: sstpc - ubuntu - sspt client - error

The first question is: do we debug only the ubuntu side or the whole setup because the ubuntu is the first client ever you try to connect to this particular SSTP server? sstp is working fine... other mikrotiks can connect ubuntu can't I basically installed ovpn and it works but since we opened this...
by genesispro
Mon May 07, 2018 1:32 pm
Forum: General
Topic: sstpc - ubuntu - sspt client - error
Replies: 2
Views: 562

sstpc - ubuntu - sspt client - error

I installed the sstp client in ubuntu and when I am trying to connect to the mikrotik sstp server I get the following error **Error: HTTP handshake with server failed, (-1) I can see the connection popping up in the firewall connections but nothing more than that. If you have any experience with thi...
by genesispro
Thu Apr 26, 2018 3:15 pm
Forum: Beginner Basics
Topic: CAPsMAN 2 SSID's with 2 different Radius servers
Replies: 7
Views: 1222

Re: CAPsMAN 2 SSID's with 2 different Radius servers

Any help would be appreciated.
All I want is to define different Radius servers for different SSIDs without hotspots!

SSID1 radius1
SSID2 radius2
.
.
.
by genesispro
Thu Apr 26, 2018 3:13 pm
Forum: Beginner Basics
Topic: Block crypto currency mining
Replies: 3
Views: 2476

Re: Block crypto currency mining

What I am doing so far is use a list of crypto domains 2000+ added to a firewall list and using it to monitor or block traffic towards these servers.
The problem is that if that domain is in a shared hosting also the other domains hosted in that server would be affected
by genesispro
Fri Apr 20, 2018 12:17 pm
Forum: Beginner Basics
Topic: Block crypto currency mining
Replies: 3
Views: 2476

Block crypto currency mining

I have a building with 100+ users. The landlord (our customer) has detected unusual increase in power bills and he is trying to detect and fail proof if possible crypto currency mining that could be increasing significantly the power usage in his building. Is there a way to detect and block that kin...
by genesispro
Wed Apr 11, 2018 10:59 am
Forum: Beginner Basics
Topic: CAPsMAN 2 SSID's with 2 different Radius servers
Replies: 7
Views: 1222

Re: CAPsMAN 2 SSID's with 2 different Radius servers

I need it also and I am not using hotspot.
I just have 2 different SSIDs/subnets which should use different Radius Servers.

Any idea?
by genesispro
Wed Feb 28, 2018 4:03 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 6
Views: 2064

Re: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

Use rc version, see change log:
*) chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
I used the https://download2.mikrotik.com/routeros ... 35.img.zip and it worked like a charm !!!

Thank both of you guys
by genesispro
Wed Feb 28, 2018 2:56 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 6
Views: 2064

Re: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

It doesn't seem to work: I am including here the steps I made boot to rescue mode: CPU1: Intel Xeon Processor (Skylake) (Cores 2) Memory: 3862 MB Disk /dev/sda: 40 GB (=> 38 GiB) Total capacity 38 GiB with 1 Disk ----------------------------------------------------- wget --no-check-certificate https...
by genesispro
Wed Feb 28, 2018 2:05 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 6
Views: 2064

Re: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

You must do the same type of setup as with Linode. Basically you make a new VM, then you boot into Rescue mode and mount your new VM disk to that. Then you download CHR IMG file, and write it to your VM disk. Then reboot to normal. https://wiki.mikrotik.com/wiki/Manual:CHR_Linode https://wiki.hetzn...
by genesispro
Wed Feb 28, 2018 1:28 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 6
Views: 2064

CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

I provided them the non iso images but they cannot use them. They need an iso that will boot and install the OS on the drive like the x86 does!

Any (fast) solutions?
by genesispro
Mon Feb 19, 2018 11:00 am
Forum: General
Topic: Bonjour/multicast from Guest subnet to other network
Replies: 0
Views: 268

Bonjour/multicast from Guest subnet to other network

I have a subnet where all smart tvs and apple tvs are. I want to be able (if possible) these devices to be discoverable via the guest network. I don't have a firewall between the 2 networks. A device from the guests network can access the device to the "TVs" network but cannot run a discovery and fi...
by genesispro
Wed Feb 14, 2018 4:58 pm
Forum: Wireless Networking
Topic: Assign different RADIUS servers to different security profiles
Replies: 1
Views: 250

Re: Assign different RADIUS servers to different security profiles

I would use that too
it would have to be available in CAPsMAN too
by genesispro
Tue Feb 13, 2018 2:04 pm
Forum: Scripting
Topic: Scripting - Virtual Static Issue or maybe a bug
Replies: 0
Views: 307

Scripting - Virtual Static Issue or maybe a bug

I have an issue with the information stored in the virtual interfaces made by Capsman. I choose Virtual static in order to be able to add the interfaces in the bridge vlan ports (since I have bridge filter on). Each interface has a different tag. The wlan interfaces transmit the correct SSIDs but wh...
by genesispro
Fri Feb 02, 2018 10:09 am
Forum: Scripting
Topic: change firewall filter order via script or API
Replies: 3
Views: 670

Re: change firewall filter order via script or API

Use the "move" command. "numbers" argument is the item(s) to move (in the other they must appear after the move), and the "destination" argument is item above which the targeted item(s) are to appear. If "destination" is omitted, the targeted items are moved to the bottom of the list. So f.e. /ip f...
by genesispro
Fri Feb 02, 2018 10:06 am
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 940

Re: API set .id * not working - how to set all vi API

Have you compared your code to the first example of PHP API? https://github.com/BenMenking/routeros-api/blob/master/examples/example1.php yes, the problem is that the $this->read() gets only the first item of the array. I modified the api class to run it until no data is returned and the return an ...
by genesispro
Thu Feb 01, 2018 2:52 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 940

Re: API set .id * not working - how to set all vi API

Still no solution.
Anyone knows why getall only returns the first item?
/interface/ethernet/getall

returns only ether1 in the array instead of all.
that is happening in all getall calls

is there another that will return all findings?
by genesispro
Wed Jan 31, 2018 5:32 pm
Forum: Scripting
Topic: change firewall filter order via script or API
Replies: 3
Views: 670

change firewall filter order via script or API

Does anyone know how to move a firewall rule from eg row 13 to 1
or from X line to Y line
using script or command line or API call?
by genesispro
Mon Jan 29, 2018 10:10 am
Forum: General
Topic: Feature Request: RAMDisk OR HTTP GET/POST Without Flash Writes [SOLVED]
Replies: 7
Views: 1335

Re: Feature Request: RAMDisk OR HTTP GET/POST Without Flash Writes [SOLVED]

You have been heard, see the latest ROS 6.42rc15:
*) fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
greetings, Daniel
Cool.... !!! I, amongst others, needed that!!!
by genesispro
Sat Jan 27, 2018 8:21 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 76900

Re: v6.41 [current]

I think I found a minor winbox bug @6.41
It allows me to add the same interface list to a bridge port multiple times
by genesispro
Thu Jan 25, 2018 9:46 am
Forum: General
Topic: Forum notifications!
Replies: 8
Views: 743

Re: Forum notifications!

it was handy
by genesispro
Wed Jan 24, 2018 12:34 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 940

Re: API set .id * not working - how to set all vi API

Weird I am trying to use the getall to get all the ids to use them but it only returns the first item /interface/getall Array ( [0] => Array ( [.id] => *3 [name] => ether1 ) ) /radius/getall Array ( [0] => Array ( [.id] => *3 [service] => hotspot,wireless ) ) using Mikrotik Version 6.41 and RouterOS...
by genesispro
Tue Jan 23, 2018 3:29 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 940

Re: API set .id * not working - how to set all vi API

You have to call the "find" command separately to get the (comma separated) list of all IDs. Write that list as the value of .id/numbers.
isn't there a wildcard symbol or regex that I could use instead?
by genesispro
Tue Jan 23, 2018 3:05 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 940

API set .id * not working - how to set all vi API

I am using the php api sending commands.
I am able to set a value using .id = 0 or .id = default and so on.

I want to update all and set for example comments = "test"
I tried
.id=*
.id=''
.id="find"
etc
but it doesn't work.

anyone knows how to do that
by genesispro
Thu Jan 18, 2018 3:12 pm
Forum: Scripting
Topic: Branding autorun only runs the first command of the script
Replies: 4
Views: 651

Re: Branding autorun only runs the first command of the script

oh finally I spotted it... I had to add a small delay at the beginning of the script
/delay 5;
was more than enough... I reset my device at least 20 times and ti worked 100%
without it 9/10 it would fail
by genesispro
Wed Jan 17, 2018 4:45 pm
Forum: General
Topic: DHCP Accounting Accepts the client without authenticating [SOLVED]
Replies: 1
Views: 267

Re: DHCP Accounting Accepts the client without authenticating [SOLVED]

yes - use RADIUS for accounting and lease;
accounting - use RADIUS for accounting only.

so according to documentation it is correct.
My bad ...

Yes will do both
by genesispro
Wed Jan 17, 2018 4:08 pm
Forum: General
Topic: DHCP Accounting Accepts the client without authenticating [SOLVED]
Replies: 1
Views: 267

DHCP Accounting Accepts the client without authenticating [SOLVED]

If I set the use Radius to accounting in the DHCP server option the clients get an IP without authenticating from the radius first. When I have it to YES (not accounting) new clients get an Access-Reject and don't get an IP. radpostauth table of the Radius gets rejected entries. The moment I change ...
by genesispro
Wed Jan 17, 2018 3:58 pm
Forum: Scripting
Topic: Branding autorun only runs the first command of the script
Replies: 4
Views: 651

Re: Branding autorun only runs the first command of the script

take some running router and type "/export file=name" and then open "name.rsc" for viewing. You will see how the file is made. I know all the above. As I explained the script runs fine on a reset no defaults router from console if I copy all and paste and no errors are produced. I just updated to 6...
by genesispro
Wed Jan 17, 2018 1:29 pm
Forum: Scripting
Topic: Branding autorun only runs the first command of the script
Replies: 4
Views: 651

Branding autorun only runs the first command of the script

I am using the branding maker and the autorun.rsc The problem is that for some reason it only executes the first command. If I copy paste the same code to a terminal it works fine. No special commands for example the second command is /ip dhcp-client add disabled=no interface=ether1; and it won't ex...
by genesispro
Thu Jan 04, 2018 1:01 pm
Forum: Wireless Networking
Topic: CAPsMAN Query-Radius Mac Address as Password [SOLVED]
Replies: 1
Views: 651

CAPsMAN Query-Radius Mac Address as Password [SOLVED]

I created an access list with query-radius action but I want to be able to post the mac address as password as well. At the moment it is posting username: mac address password: <nothing> I want like in the hotspot option mac auth mode - mac as username and password that sends username: mac address p...
by genesispro
Sun Dec 03, 2017 1:21 am
Forum: General
Topic: NAT - Load Balance traffic to be NATed to several destinations
Replies: 3
Views: 348

Re: NAT - Load Balance traffic to be NATed to several destinations

Thank you very much... I will try it but if you have(handy) a small basic example (export) it would be greeeeeaaaaat Thank you anyway again Yes. You can mangle incoming connections in prerouting chain like a PCC style. Than use connection mark in NAT rules for dst-nating to different web servers. Us...
by genesispro
Wed Nov 29, 2017 6:02 pm
Forum: General
Topic: NAT - Load Balance traffic to be NATed to several destinations
Replies: 3
Views: 348

NAT - Load Balance traffic to be NATed to several destinations

3 webservers that share the same content connect to one mikrotik. The mikrotik has a nat rule to forward packages with destination port 80 to server1:80 can I load balance with some criteria like the source ip and do for example a round robin to my 3 webservers? In other words to choose dynamically ...
by genesispro
Wed Nov 29, 2017 4:39 pm
Forum: General
Topic: More MUMs in Europe please!!!
Replies: 1
Views: 225

More MUMs in Europe please!!!

Does anyone know any future MUMs in Europe?

Who wants more MUMs in Europe preferably in English?
by genesispro
Thu Nov 16, 2017 10:55 am
Forum: General
Topic: Firmware mikrotik or .dpk push via PXE without netinstall
Replies: 0
Views: 262

Firmware mikrotik or .dpk push via PXE without netinstall

I managed to create a PXE server a mikrotik and I can for example load a mini iso but can I use it to push a .dpk (branding) file to a mikrotik that boots over ethernet (pressing the reset button)?
by genesispro
Tue Oct 31, 2017 5:03 pm
Forum: General
Topic: 2011/3011 Vlan help
Replies: 2
Views: 312

Re: 2011/3011 Vlan help

"It also appears to be possible to bridge the traffic including the VLAN tags but I never used that">>> Indeed I need that as I am not always sure of all the vlan tags to bridge them all... and it would look ugly too but thank you anyway... let's hope someone can advice us how to "switch" the 2 swit...
by genesispro
Tue Oct 31, 2017 10:57 am
Forum: General
Topic: 2011/3011 Vlan help
Replies: 2
Views: 312

2011/3011 Vlan help

I have an issue which I believe can easily be solved but I haven't managed to find it myself (yet). In rb2011 and rb3011 we have 2 switch groups. When I master ports 1-5 and 6-10 if I have a VLAN tagged packet on port 5 it arrives fine on port1,2,3,4, also on the same on the second switch group if I...
by genesispro
Fri Oct 20, 2017 11:56 am
Forum: RouterBOARD hardware
Topic: RB3011 in a desktop case with 5Ghz wifi replacement for RB2011UiAS-2HnD-IN
Replies: 10
Views: 1787

Re: RB3011 in a desktop case with 5Ghz wifi replacement for RB2011UiAS-2HnD-IN

Hey Normis, share some of the exciting features and also arrange for a European MUM again... it has been a while since Italy! BTW the most of the exciting products like 24port poe switch, in-wall AP and wireless wire that you showed us there are still not available to buy!!! Currently there is no pl...
by genesispro
Fri Oct 13, 2017 10:42 am
Forum: General
Topic: v6.41x caps/vlan/bridge issue (or bug?)
Replies: 0
Views: 348

v6.41x caps/vlan/bridge issue (or bug?)

If i have a cap client bound to a bridge and I have the local forwarding enabled with a use-tag the wireless tagged traffic does not go through the bridge unless I manually add the dynamic wlan interfaces to the vlan with the current tagged options! If I add them manually then the tagged traffic pas...
by genesispro
Thu Oct 05, 2017 12:33 pm
Forum: General
Topic: Port Forwarding - It should be easy but it isn't [SOLVED]
Replies: 11
Views: 1018

Re: Port Forwarding - It should be easy but it isn't [SOLVED]

I don't that you need the last nat rule.
2 things to check...
does your webserver have the mikrotik as a gateway (192.168.56.1)?
and is the firewall on your webserver accepting incoming traffic on port 80?
by genesispro
Mon Sep 18, 2017 12:49 pm
Forum: Scripting
Topic: failover script without public ip on the mikrotik
Replies: 2
Views: 732

Re: failover script without public ip on the mikrotik

in this case which dns should I select? The mikrotik cannot use 8.8.8.8 via the second line or 8.8.4.4 via the first line with this config?
I guess I would need 2 IPs other than 8.8.8.8 8.8.4.4 to use them as a check gateway
by genesispro
Fri Sep 15, 2017 4:02 pm
Forum: Scripting
Topic: failover script without public ip on the mikrotik
Replies: 2
Views: 732

failover script without public ip on the mikrotik

My gateways are both local IPs... 192.168.0.1 192.168.1.1 I use the following script :if ([/ping 8.8.8.8 count=4 interface=ether1] = 0) do={/ip route set distance=3 number=[find comment=telenet]} else={/ip route set distance=1 number=[find comment=telenet]} it hops to WAN2 correctly but the it won't...
by genesispro
Sat Aug 05, 2017 1:30 pm
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 4792

Re: Wap LTE kit supports sms? [SOLVED]

So finally does anyone know if the wap LTE kit with the onboard modem supports SMS?
by genesispro
Sat Aug 05, 2017 11:53 am
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 4792

Re: Wap LTE kit supports sms? [SOLVED]

Normis will it support sms? Because I just bought an SXT LTE to use to send SMSes but it is not working. Also are you planning to support SMS in the SXT LTE? are you sure that your 4g provider support sms via 4g? most of operators doesn't (4g is for traffic and video calls). sxt lte, wap lte (versi...
by genesispro
Sat Aug 05, 2017 10:24 am
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 4792

Re: Wap LTE kit supports sms? [SOLVED]

Normis will it support sms?
Because I just bought an SXT LTE to use to send SMSes but it is not working.

Also are you planning to support SMS in the SXT LTE?
by genesispro
Fri Aug 04, 2017 2:14 am
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 4792

Wap LTE kit supports sms? [SOLVED]

Will the wap lte kit support sms because the sxt lre doesn't!!!
by genesispro
Wed Jun 21, 2017 3:18 pm
Forum: General
Topic: TR069 with FreeACS
Replies: 56
Views: 49837

Re: TR069 with FreeACS

Can a MikroTik staff member clarify: 1. Does pushing down a config file of type .overwrite also replace the default config (like it does with NetInstall)? I assume not, but just thought I would ask. If it does, great. 2. If it does not, could you add a means of replacing the factory-default config ...
by genesispro
Thu May 11, 2017 3:45 pm
Forum: General
Topic: RAMdisk
Replies: 11
Views: 1551

Re: RAMdisk

indeed a RAMDisk would be very useful to keep sector writes as low as possible!!!
by genesispro
Fri Apr 21, 2017 10:31 pm
Forum: General
Topic: fasttrack and hotspot problem
Replies: 1
Views: 651

fasttrack and hotspot problem

Weird thing suddenly happened. With the fasttrack activated when a user authenticates to the hotspot he cannot load any website. It pings to the public and it also resolves the dns... browsing doesn't work at all. I realised that it was the fasttrack because the moment I run a torch while the torch ...
by genesispro
Wed Apr 19, 2017 10:25 am
Forum: Scripting
Topic: POST Request with fetch
Replies: 69
Views: 27010

Re: POST Request with fetch

is there a way to post an array of values? eg a /find something like dhcp leases
by genesispro
Thu Apr 13, 2017 4:08 pm
Forum: Scripting
Topic: /tool fetch - to variable [SOLVED]
Replies: 7
Views: 4876

Re: /tool fetch - to variable [SOLVED]

I have a similar problem I want to read the result of a fetch being 1 or 0 and if 1 then do something if 0 do nothing but I always have to write to the flash to read it back unfortunately we should be able to do something like :local answer [/tools fetch url="http://example.com" keep-result=no] any ...
by genesispro
Fri Apr 07, 2017 11:47 am
Forum: Scripting
Topic: fetch http-data how to send properly an array
Replies: 2
Views: 917

Re: fetch http-data how to send properly an array

anyone knows anything that could help?
by genesispro
Wed Apr 05, 2017 5:49 pm
Forum: Scripting
Topic: fetch http-data how to send properly an array
Replies: 2
Views: 917

fetch http-data how to send properly an array

I cannot find the way to post the data properly using http-data option of fetch command (I know it is only in the RC version still 6.39rc62) I am trying tool fetch http-method=post http-data=$myVar url=http://example.com but I the value is sent as the name of the post variable with an empty value I ...
by genesispro
Mon Mar 27, 2017 1:17 pm
Forum: Wireless Networking
Topic: CAPSMAN - 90% CAPs get 2422 in auto channel
Replies: 1
Views: 790

CAPSMAN - 90% CAPs get 2422 in auto channel

I am having an issue where I have a building of 149 waps controlled by CAPSMAN and the moment I set their channels to auto they tend to use 2422 channel causing lots of noise to each other. If I do a wireless scan from one of them they get at least 10 nearby waps all with 2422. I am using the latese...
by genesispro
Wed Mar 15, 2017 3:36 pm
Forum: Scripting
Topic: looking for tr-069 consultation
Replies: 0
Views: 367

looking for tr-069 consultation

I am looking for someone experienced for consultation to setup tr-069 "server" and provision mikrotik devices to it and so on.

You can contact me at dimitris@compoint.be or on facebook at https://www.facebook.com/bazas7gr
by genesispro
Thu Feb 16, 2017 12:18 am
Forum: General
Topic: DNS logging
Replies: 5
Views: 4761

Re: DNS logging

Nice one but this approach does not include the client IP that requested it unfortunatelly Well, now it works... at least with 6.37.4. Found out accidentally the other day while trying to send everything but debug to remote log server. system logging add action=memory target=dns Results with: 20:15:...
by genesispro
Sat Feb 04, 2017 2:09 am
Forum: Wireless Networking
Topic: CAP client with blank SSID at 5GHz suddenly
Replies: 1
Views: 785

Re: CAP client with blank SSID at 5GHz suddenly

Now that the customers left I disabled the CAPsMAN on the controller and re-enabled it and everything worked again. 5GHz started transmitting again
by genesispro
Sat Feb 04, 2017 1:31 am
Forum: Wireless Networking
Topic: CAP client with blank SSID at 5GHz suddenly
Replies: 1
Views: 785

CAP client with blank SSID at 5GHz suddenly

I have a setup with an rb3011 as a router and CAPsMAN controller where there are 3 HAP ACs, 1 WAP AC and so on all on local forwarding. all of them running 6.38 version Today at rush hour the customer called me (that has multiple IPADs hoping to both bands) that the IPADs where repeatedly trying to ...
by genesispro
Fri Jan 06, 2017 3:01 pm
Forum: The Dude
Topic: Move device between maps
Replies: 6
Views: 1522

Re: Move device between maps

It would be very handy!
by genesispro
Mon Dec 19, 2016 8:59 pm
Forum: Scripting
Topic: Capsman configuration mode="" cannot set at cli
Replies: 4
Views: 676

Re: Capsman configuration mode="" cannot set at cli

it is easy to add it. The problem is removing the ap mode via script
by genesispro
Fri Dec 16, 2016 8:11 pm
Forum: Scripting
Topic: Capsman configuration mode="" cannot set at cli
Replies: 4
Views: 676

Capsman configuration mode="" cannot set at cli

I am trying to set from cli the mode in a capsman configurations from "ap" to <nothing> to use it as virtualAP I tried the following but nothing works /caps-man configuration set myConfig mode="" /caps-man configuration set myConfig mode=none /caps-man configuration set myConfig mode=no /caps-man co...
by genesispro
Sun Nov 06, 2016 9:19 am
Forum: The Dude
Topic: Dude Wireless Registration - CapsMan
Replies: 4
Views: 2490

Re: Dude Wireless Registration - CapsMan

Indeed
by genesispro
Sun Nov 06, 2016 9:18 am
Forum: General
Topic: Bypassing HTTPS links in Hotpost
Replies: 2
Views: 387

Re: Bypassing HTTPS links in Hotpost

I think you could try to whitelist the IP where the site is hosted. But I am pretty sure you can do that for a hostname too
by genesispro
Thu Nov 03, 2016 10:19 am
Forum: General
Topic: DNS logging
Replies: 5
Views: 4761

DNS logging

Is there a way to log all DNS requests? somehow build a table of
www.example.com 192.168.0.25 1/11/2016 13:56
the IP should be the IP of the client that requested it
by genesispro
Mon Oct 10, 2016 12:14 am
Forum: General
Topic: hetzner - netscan on routeros reboot
Replies: 0
Views: 312

hetzner - netscan on routeros reboot

Everytime I update my RouterOS that runs in a VM in Hetzner I get messages from Hetzner that I am scanning their network on 8291 port (winbox) and on UDP 161 (snmp). How can I stop it from doing a netscan on reboot (or upgrade I don't know exactly) so I won't have to explain them everytime that is n...
by genesispro
Tue Oct 04, 2016 4:16 pm
Forum: General
Topic: hotspot slows down a lot the bandwidth
Replies: 0
Views: 325

hotspot slows down a lot the bandwidth

Before I enable the hotspot my speedtest is around 150mbps on a 250mbps line on LAN once I enable the hotspot and I login fine and have access I do the speedtest and the speed drops to 50mpbs! The same moment I disable the hotspot and speed goes again to 150mbps

I am using a cloud CRS125-24G-1S
by genesispro
Thu Sep 08, 2016 3:20 pm
Forum: General
Topic: gsm error : unable to load unread sms - timeout
Replies: 8
Views: 3681

Re: gsm error : unable to load unread sms - timeout

Still no way to fix this issue?
by genesispro
Tue Aug 23, 2016 1:22 pm
Forum: General
Topic: gsm error : unable to load unread sms - timeout
Replies: 8
Views: 3681

Re: gsm error : unable to load unread sms - timeout

I also have it on a 922UAGS-5HPacD with a HUAWEI ME909u-521 modem. It is working for a few days and suddenly I get it with no reboot. And the worst thing is that it can't be resolved with a reboot. I have to place the sim to a phone remove all sms and then it is back but it is not a solution. On my ...
by genesispro
Tue Aug 23, 2016 1:14 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 41747

Re: v6.36 [current] is released!

Not sure if this has been reported. Suppose you are running an older version of ROS with wireless-fp enabled, and you want to upgrade to 6.36. You might think it would be efficient to disable the wireless-fp package, enable the wireless-cm2 package, upload the new ROS image, and reboot once to make...
by genesispro
Mon Aug 22, 2016 10:01 am
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 41747

Re: v6.36 [current] is released!

I had about 5 devices most of them 2011UiAS-2HnD and one CRS125-24G-1S out of 300 devices that I monitor that where malfunctioning on upgrade to 6.36. Not all menus would show data and even terminal wouldn't work. All I managed to do was to paste a file to the files and do a downgrade. I used 6.35....
by genesispro
Thu Aug 18, 2016 5:30 pm
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 41747

Re: v6.36 [current] is released!

I had about 5 devices most of them 2011UiAS-2HnD and one CRS125-24G-1S out of 300 devices that I monitor that where malfunctioning on upgrade to 6.36. Not all menus would show data and even terminal wouldn't work. All I managed to do was to paste a file to the files and do a downgrade. I used 6.35.4...
by genesispro
Wed Aug 10, 2016 12:18 pm
Forum: General
Topic: firmware upgrade/reboot over CAPSMAN
Replies: 5
Views: 4921

Re: firmware upgrade/reboot over CAPSMAN

thx I got the idea... I totally forgot the auto run script over ftp... I was always doing it over ssh but after setting a password it would become more tricky with the certificates to autologin and run the script
by genesispro
Mon Aug 08, 2016 10:40 pm
Forum: General
Topic: firmware upgrade/reboot over CAPSMAN
Replies: 5
Views: 4921

Re: firmware upgrade/reboot over CAPSMAN

Are you sure you mean firmware and not update?
I mean the
/system routerboard upgrade
function
by genesispro
Mon Aug 08, 2016 2:13 pm
Forum: General
Topic: firmware upgrade/reboot over CAPSMAN
Replies: 5
Views: 4921

firmware upgrade/reboot over CAPSMAN

is there a way to force a firmware upgrade/reboot from CAPSMAN cause when I update eg 100 CAPSMAN clients then if a firmware upgrade is needed I have to login to each one and do the upgrade and reboot. I already made a script to upgrade them all over telnet but it only works if the devices have no p...
by genesispro
Mon Jul 18, 2016 10:56 am
Forum: General
Topic: ppp interface = interfaces in total (bug?)
Replies: 0
Views: 305

ppp interface = interfaces in total (bug?)

it seems like a bug... on winbox on 3011 (I don't know if it is model specific) on PPP list of interfaces I have 1 but I get at the bottom total 310 which is the total of all of my interfaces
Image
by genesispro
Thu Jul 14, 2016 5:10 pm
Forum: General
Topic: Winbox: Romon Agent not found
Replies: 3
Views: 3583

Winbox: Romon Agent not found

I get that a lot... for some reason winbox cannot connect anymore... and the connect to romon button is lost... to resolve I go to %appdata% and delete the mikrotik folder that stores the sessions and then I can work again... any non temporary solutions? or what is causing it to avoid ? I connect a ...
by genesispro
Tue Jul 12, 2016 1:52 pm
Forum: The Dude
Topic: probe issue ... looks unstable many times
Replies: 3
Views: 993

Re: probe issue ... looks unstable many times

it is x86 on a VM on proxmox virtual host running 6.35.2 stable 
by genesispro
Fri Jul 08, 2016 6:18 pm
Forum: General
Topic: CAPSMAN remote upgrade 3011->non ARM clients
Replies: 3
Views: 1180

Re: CAPSMAN remote upgrade 3011->non ARM clients

Use the following command (on CAPsMAN) to specify where you put the .npk files:
/caps-man manager set package-path=...
Thx it worked as expected...!!!
by genesispro
Fri Jul 08, 2016 1:51 pm
Forum: General
Topic: CAPSMAN remote upgrade 3011->non ARM clients
Replies: 3
Views: 1180

CAPSMAN remote upgrade 3011->non ARM clients

I have a 3011 as a capsmanager and I am trying to upgrade from the capsman interface the clients but I can't cause 3011 is ARM based and wAP or others need the mips file... error says that the file mips....npk is not found even if I place it in the root folder of the files. is there a certain folder...
by genesispro
Thu Jul 07, 2016 2:40 pm
Forum: The Dude
Topic: probe issue ... looks unstable many times
Replies: 3
Views: 993

probe issue ... looks unstable many times

I have made a probe/function that works fine but at some time during the day many sites become orange ... ping service is ok but rogue service is down. What I do to resolve and turn back to green for several hours is to edit the function I created and edit it just by adding a space at the end and sa...
by genesispro
Fri Jun 24, 2016 11:19 pm
Forum: General
Topic: No replacement key option like in the past
Replies: 1
Views: 386

No replacement key option like in the past

I cannot find the option to request for a replacement key for a license that I had to a VPS running RouterOS that I moved to a new VPS

Any information will be appreciated
by genesispro
Wed Jun 22, 2016 1:23 pm
Forum: General
Topic: Radius duplicate(and wrong) requests send on WPA-EAP or WPA2-EAP
Replies: 0
Views: 270

Radius duplicate(and wrong) requests send on WPA-EAP or WPA2-EAP

I am using freeradius 3 in combination with the mikrotiks... the issues that I have is that when a user tries to login via the hotspot I get one record/call in the freeradius database which is what I expect. The problem starts when a user is trying to login via WPA-EAP non hotspot... then I get for ...
by genesispro
Sat Jun 11, 2016 6:19 pm
Forum: Wireless Networking
Topic: login screen Hotspot
Replies: 1
Views: 857

Re: login screen Hotspot

are you accessing a non https website to get the splash screen?
by genesispro
Mon May 23, 2016 1:29 pm
Forum: General
Topic: Ip cloud and dual wan
Replies: 2
Views: 1758

Ip cloud and dual wan

I have a small issue or maybe more a feature request... I have a site with dual wan load balancing and using the ip cloud service could I select from which interface I want the ip cloud to get the wan ip? or even better could there be added a multiple interfaces option and have a hostname per wan in...
by genesispro
Fri Apr 22, 2016 11:39 am
Forum: RouterBOARD hardware
Topic: rb2011 blinking after reboot
Replies: 0
Views: 463

rb2011 blinking after reboot

U have an rb2011 that worked fine the first hour and then I rebooted it and after the start services the ether 6-10 blink all together for a second every about 10-20 seconds and while blinking my ethernet connection droos. I cannot reach it neither in winbox nor in netinstall. I can only navigate to...
by genesispro
Wed Mar 23, 2016 1:21 pm
Forum: Scripting
Topic: Can I visit a website in a script without writing to flash disk
Replies: 1
Views: 578

Can I visit a website in a script without writing to flash disk

I use the tool fetch periodically to visit a certain website in order to send some data from the mikrotik to my webserver for monitoring purposes Even though I return an empty string from the webserver, the mikrotik is writing an empty file to the disk. Will that affect the life of the flash writes?...
by genesispro
Wed Jan 27, 2016 2:33 pm
Forum: Scripting
Topic: import command result to a global variable
Replies: 1
Views: 551

import command result to a global variable

Hi, I want to be able to save the result to a global variable in order to post back the result of the import process... example :global result [import test.rsc] or import test.rsc > result.txt then I could use $result or the result.txt to post me a possible error message on the script... is that pos...
by genesispro
Fri Dec 18, 2015 10:57 am
Forum: General
Topic: Feature Request: Hotspot HTTPS redirection problem!!!
Replies: 5
Views: 3343

Feature Request: Hotspot HTTPS redirection problem!!!

many of mikrotik hotspot distributors would be more than happy if you had an option to catch ALL pages including the HTTPS ones and redirect them to the captive page portal without any errors. Several other way less smart hotspot systems can do it... I believe that mikrotik could provide that as an ...
by genesispro
Mon Dec 29, 2014 10:27 am
Forum: General
Topic: https problem on hotspot
Replies: 97
Views: 90104

Re: https problem on hotspot

My certificate shows up fine when I access the login page directly (https) or if I access an http page which redirect me to my https login... all green locks... all fine... when the redirect starts from an https page then it tries to load my certificate with the page I tried to access eg. https://ww...
by genesispro
Sun Dec 14, 2014 3:42 pm
Forum: General
Topic: https problem on hotspot
Replies: 97
Views: 90104

Re: https problem on hotspot

Same problem here... I have bought an ssl certificate and it is loaded fine. When it captures an http request it is taking me to my https://my.domain.xx and it accepts my certificate... everything is ok... green lock on the address bar and so on... when it captures an https request it is trying to l...