Community discussions

MikroTik App

Search found 284 matches

by genesispro
Fri Mar 15, 2024 6:46 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2116

Re: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

which is not using any vlans
in case it helps if I do a btest I get similar numbers
tcp down ~600 at 45% cpu load
udp down ~800 at 33% cpu load
by genesispro
Fri Mar 15, 2024 6:24 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2116

Re: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

in case it helps if I do a btest I get similar numbers
tcp down ~600 at 45% cpu load
udp down ~800 at 33% cpu load
by genesispro
Fri Mar 15, 2024 5:25 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2116

Re: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

I renamed to BBB DDD and so on the names and hostnames are random letters, and I removed all the keys from the wireguard peers /interface bridge add fast-forward=no name=bridge165 add fast-forward=no name=bridgeBBB port-cost-mode=short add fast-forward=no name=bridgeDDD port-cost-mode=short add fast...
by genesispro
Fri Mar 15, 2024 4:59 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2116

Re: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

ookla speedtest app towards the server that is in the same datacenter (1ms ping) all firewall rules enabled + fasttrack enabled 640 down 819 up all firewall rules disabled (not fasttrack) 660 down 886 up all firewall rules disabled + fasttrack disabled 696 down 839 up all firewall rules enabled + fa...
by genesispro
Fri Mar 15, 2024 4:18 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2116

Re: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

I tried to disable all rules but nothing significant changed
by genesispro
Fri Mar 15, 2024 1:47 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2116

RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

I recently decided to swap a chr with a RB5009UG+S+ in a datacenter where my wan is 1gbps. Unfortunately with the "same" setup in matter of rules etc I now get max 600mbps out of 1000. With the chr I was getting nearly 1000. Is it the hardware or am I missing something? I also swapped masq...
by genesispro
Sun Dec 10, 2023 6:26 pm
Forum: General
Topic: Chateau 5G AX - Faster with disabled fasttrack
Replies: 5
Views: 1751

Re: Chateau 5G AX - Faster with disabled fasttrack

The config is very strange, this is the cause of your issues. There are many weird things. Bridge with one port, firewall also wrong. Also, have you tried 7.13 ? what is wrong with the firewall? Do you mean that the fasttrack rules are disabled? The reasons for having this single interface in a bri...
by genesispro
Fri Dec 08, 2023 11:15 am
Forum: General
Topic: Chateau 5G AX - Faster with disabled fasttrack
Replies: 5
Views: 1751

Re: Chateau 5G AX - Faster with disabled fasttrack

The difference is big. I have a CCR2004 behind the chateau from which I am issuing the Btest. Without fasttrack I get around 500mbs and with fasttrack less than 200 As you notice the chateau configuration is pretty minimal/basic to provide the ccr with lte internet /interface bridge add fast-forward...
by genesispro
Thu Dec 07, 2023 8:55 pm
Forum: General
Topic: Chateau 5G AX - Faster with disabled fasttrack
Replies: 5
Views: 1751

Chateau 5G AX - Faster with disabled fasttrack

It seams that I get way more speed when I disable the fasttrack rules.
Any explanation?
by genesispro
Sat Nov 25, 2023 2:17 pm
Forum: General
Topic: Chateax 5g AX - lte cannot connect unless I reinsert the SIM
Replies: 5
Views: 1559

Re: Chateau 5g AX - lte cannot connect unless I reinsert the SIM

I just tried it on a new chateau same version and I upgraded it to 7.12.1 and I didn't have the issue while keeping the initial modem firmware RG502QEAAAR13A02M4G_01.001.01.001. I stopped and started the lte interface 30 times and all of them in 10' it was connected again. The moment I upgraded to t...
by genesispro
Fri Nov 24, 2023 10:27 pm
Forum: General
Topic: Chateax 5g AX - lte cannot connect unless I reinsert the SIM
Replies: 5
Views: 1559

Re: Chateax 5g AX - lte cannot connect unless I reinsert the SIM

so far I managed to "solve" it by adding a watchdog towards the internet and after 3-4 restarts it manages to work again.
I have noticed that if I enable the 3g mode as well it manages to work at 1-2 restarts unless it is just more "lucky" like that.
by genesispro
Fri Nov 24, 2023 10:51 am
Forum: General
Topic: Chateax 5g AX - lte cannot connect unless I reinsert the SIM
Replies: 5
Views: 1559

Re: Chateax 5g AX - lte cannot connect unless I reinsert the SIM

one of the lte logs that might be useful is
lte1 mbim: register state: searching, nwe: illegal MS
by genesispro
Fri Nov 24, 2023 10:48 am
Forum: General
Topic: Chateax 5g AX - lte cannot connect unless I reinsert the SIM
Replies: 5
Views: 1559

Chateax 5g AX - lte cannot connect unless I reinsert the SIM

I have even upgraded to latest (now) 7.13beta2 (development) and modem RG502QEAAAR13A03M4G_02.001.02.001 The moment I insert the sim it connects fine to the provider. The moment I do any change that will need to reconnect to the provider it won't connect anymore. Even if I reboot the device, turn it...
by genesispro
Wed Sep 20, 2023 7:15 pm
Forum: The Dude
Topic: Dude lately stops writing new data
Replies: 1
Views: 2169

Re: Dude lately stops writing new data

anyone?
by genesispro
Mon Sep 18, 2023 1:34 pm
Forum: The Dude
Topic: Dude lately stops writing new data
Replies: 1
Views: 2169

Dude lately stops writing new data

Lately dude looks like it stops writing new data. The icons in the maps remain the same, green red and so on. I also cannot add a new entry. The moment I reboot it starts working again. Icons turn green/red and so on and I can add new items. At a certain point (lately very soon probably with 1-2 day...
by genesispro
Thu Apr 27, 2023 8:12 pm
Forum: Virtualization
Topic: Hetzner Cloud - XZ-compressed data is corrupt
Replies: 0
Views: 2024

Hetzner Cloud - XZ-compressed data is corrupt

I suddenly get a XZ-compressed data is corrupt on one of my VMs in hetzner on which I was connected a few minutes ago.
I have a 7 days backup and I have already tried to restore 1 and 2 days old backup and I still get the same error.
Any ideas?
by genesispro
Sat Mar 18, 2023 8:39 am
Forum: General
Topic: D53G-5HacD2HnD (chateau 5g) sim-not-present -> after reboot it works
Replies: 1
Views: 501

Re: D53G-5HacD2HnD (chateau 5g) sim-not-present -> after reboot it works

it has already happened 5 times. When it happens I am trying to make supout.inf but it hangs. I reboot and it works fine (until next time in 1-2 days). I also noticed on logs something like out of memory but it kept kicking me out and because it is in production I rebooted it to "fix" it t...
by genesispro
Mon Mar 13, 2023 4:06 pm
Forum: General
Topic: D53G-5HacD2HnD (chateau 5g) sim-not-present -> after reboot it works
Replies: 1
Views: 501

D53G-5HacD2HnD (chateau 5g) sim-not-present -> after reboot it works

I have a chateau 5g which gets sim no present status but the moment I reboot it it works without moving the sim.
I don't know when it started. I upgraded it to 7.8rc2 (testing) and it did it again
by genesispro
Fri Mar 10, 2023 11:16 am
Forum: General
Topic: ROS 7 - Routing Rules - Address list - and NOT option would be nice!
Replies: 6
Views: 545

ROS 7 - Routing Rules - Address list - and NOT option would be nice!

In ROS7 routing Rules...
it would be handy in source and destination to be able to add an address list.
Also to be able to add the NOT option.
Don't you think?
Would it be possible?
by genesispro
Thu Feb 16, 2023 12:05 am
Forum: Wireless Networking
Topic: Cube 60Pro ac Max Distance on 60Ghz?
Replies: 16
Views: 3866

Re: Cube 60Pro ac Max Distance on 60Ghz?

My longest link with cube60pro ac is 1287.21 m
distancecube60pro.PNG
by genesispro
Thu Jan 05, 2023 8:49 am
Forum: General
Topic: New Chateau 5G Firmware (xx13A02M4G) - Broken Connection
Replies: 16
Views: 3257

Re: New Chateau 5G Firmware (xx13A02M4G) - Broken Connection

Any news on that?
I also have an upgraded to R..13... Chateau 5g and it can see the 5g network but it won't connect
by genesispro
Sun Jan 01, 2023 12:17 pm
Forum: General
Topic: Happy New Year ☃ ✨
Replies: 5
Views: 698

Re: Happy New Year ☃ ✨

Happy new features?
by genesispro
Sat Nov 19, 2022 12:26 am
Forum: General
Topic: ROS7 and mark routing issue
Replies: 1
Views: 323

ROS7 and mark routing issue

I am trying to do PCC in ros7 but it won't work for some reason. It seams to break the moment I mark packets with routing marks. I tried to simplify it and see if the simple approach works but nothing. So my latest config is a new routing table, one rule to mark routing to that routing table and one...
by genesispro
Tue Nov 15, 2022 8:22 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122841

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

It is brand new not delivered to the customer yet. At first I was breaking my head spending hours trying to spot what I was doing wrong in my config. Then I looked it up and found that post with pretty similar problem. I also turned it to SwOS and nothing changed. You only see traffic going out and ...
by genesispro
Mon Nov 14, 2022 8:26 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122841

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

I think the problem on mine is on ports eth9-eth16. The moment it boots they work and after a while possible when some data pass through they stop communicating. POE is working on those ports, the data are not passing
by genesispro
Thu Oct 13, 2022 8:17 am
Forum: General
Topic: CCR2004 v7.5 half options in winbox [SOLVED]
Replies: 5
Views: 848

Re: CCR2004 v7.5 half options in winbox [SOLVED]

I found the solution.
I logged in via the web UI and I went to a menu with the skin designer which was also looking limited and I pressed the reset button that supposedly would reset only this menu options. The moment I pressed save everything returned back to normal on winbox
by genesispro
Wed Oct 12, 2022 3:40 pm
Forum: General
Topic: CCR2004 v7.5 half options in winbox [SOLVED]
Replies: 5
Views: 848

Re: CCR2004 v7.5 half options in winbox [SOLVED]

ssh works fine.
Only winbox has the issue (I haven't tested the web UI)
Interfaces, ppp crashes and also submenus are limited
ccr2.PNG
by genesispro
Wed Oct 12, 2022 3:14 pm
Forum: General
Topic: CCR2004 v7.5 half options in winbox [SOLVED]
Replies: 5
Views: 848

Re: CCR2004 v7.5 half options in winbox [SOLVED]

latest 3.37
by genesispro
Wed Oct 12, 2022 2:47 pm
Forum: General
Topic: CCR2004 v7.5 half options in winbox [SOLVED]
Replies: 5
Views: 848

CCR2004 v7.5 half options in winbox [SOLVED]

After upgrading a ccr2004-1G-12S+2XS to v7.5 stable I can see only 30-40% of the menus in winbox and some of them the moment I click on them winbox crashes.
Any workaround before I try to upgrade to 7.6rc?
by genesispro
Sat Oct 01, 2022 9:42 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122841

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

Pfff the problem exists also on SwOS finally. Can something be done soon enough?
by genesispro
Fri Sep 30, 2022 3:44 am
Forum: General
Topic: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Replies: 428
Views: 122841

Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8

I am having a similar problem. I don't know if it is certain ports. The ports are switched and the moment the device boots traffic goes through. After a while, I think if I also transfer something like 100mbit data for a few seconds it stops working. No data is going through some ports. I tried it s...
by genesispro
Mon Sep 26, 2022 1:50 pm
Forum: Wireless Networking
Topic: chateau 5g
Replies: 14
Views: 3484

Re: chateau 5g

any news on that?
I haven't upgraded to that firmware yet.
Although I am "bugged" to do so
by genesispro
Wed Sep 21, 2022 1:55 pm
Forum: General
Topic: most effective failover? [SOLVED]
Replies: 53
Views: 8088

Re: most effective failover? [SOLVED]

It depends on what kind of WAN you have - unless you've got public addresses also in LAN and your own AS number, the only thing you can do is to speed up the failure detection using the method described by means of some scripts pinging the canary addresses more frequently than in those hardcoded 10...
by genesispro
Fri Sep 02, 2022 8:22 am
Forum: General
Topic: mANT LTE 5o and Chateau 5G ???
Replies: 1
Views: 328

mANT LTE 5o and Chateau 5G ???

If I understand well this product wouldn't improve the 5g signal correct?
by genesispro
Fri Jun 24, 2022 11:36 am
Forum: General
Topic: v7 PPPoE Client freezes when modem resyncs
Replies: 0
Views: 420

v7 PPPoE Client freezes when modem resyncs

Since I moved installations that run on PPPoE via the ISP modem I have an issue where once the modem drops the pppoe connection (like loosing sync) the mikrotik keeps the interface alive and never reconnects unless I disable/enable the interface or remove cable and plug it back. I didn't have that i...
by genesispro
Sat May 28, 2022 2:04 pm
Forum: General
Topic: someone set my 2 cAP ac devices with same mac address! [SOLVED]
Replies: 8
Views: 1248

Re: someone set my 2 cAP ac devices with same mac address! [SOLVED]

It may have been unintentional. If you make a .backup on one device and restore it on another (not officially supported but works if the two devices are the same model) various things, including the original MAC addresses, are cloned. These can be reset - in Winbox if you open an interface one of t...
by genesispro
Sat May 28, 2022 1:01 pm
Forum: General
Topic: someone set my 2 cAP ac devices with same mac address! [SOLVED]
Replies: 8
Views: 1248

Re: 2 cAP ac devices with same mac address! [SOLVED]

you import backup or script from one to another? I took over this installation and I reset all devices except the cap clients that I modified the settings... I couldn't imagine that they had spoofed a mac address to an existing one in the same network.... They shouldn't have done it... And I should...
by genesispro
Sat May 28, 2022 12:27 pm
Forum: General
Topic: someone set my 2 cAP ac devices with same mac address! [SOLVED]
Replies: 8
Views: 1248

Re: 2 cAP ac devices with same mac address! [SOLVED]

I had to post this to find out someone (whom I can't tell) had changed the mac address... interface reset and ready pfffffff
by genesispro
Sat May 28, 2022 12:22 pm
Forum: General
Topic: someone set my 2 cAP ac devices with same mac address! [SOLVED]
Replies: 8
Views: 1248

someone set my 2 cAP ac devices with same mac address! [SOLVED]

I have in an installation 2 CAP AC with the same mac address on eth1 (and eth2) of course acting weird on the same network How is that possible? You will notice that the serial number is unique but mac address the same [admin@CAP-103b] /interface/ethernet> print Flags: R - RUNNING; S - SLAVE Columns...
by genesispro
Thu May 19, 2022 7:17 am
Forum: General
Topic: Ping -> multiple replies per request
Replies: 13
Views: 1756

Re: Ping -> multiple replies per request

What does that mean ? If some device have WDS active (for other competitors is called: Universal Repeater, Repeater, Extender, etc.), enable the 4 MAC address mode for simulating "bridging" between interfaces... ah, sorry for my english....... I have plugged a grandstream gwn7664 to test ...
by genesispro
Tue May 17, 2022 8:33 pm
Forum: General
Topic: Ping -> multiple replies per request
Replies: 13
Views: 1756

Re: Ping -> multiple replies per request

1 192.168.40.170 56 128 7ms28us 1 192.168.40.170 56 128 7ms342us 1 192.168.40.170 56 128 7ms353us 1 192.168.40.170 56 128 7ms361us 2 192.168.40.170 56 128 14ms467us 2 192.168.40.170 56 128 14ms798us 2 192.168.40.170 56 128 14ms835us 2 192.168.40.170 56 128 14ms844us 3 192.168.40.170 56 128 19ms432us...
by genesispro
Tue May 17, 2022 2:51 pm
Forum: General
Topic: Ping -> multiple replies per request
Replies: 13
Views: 1756

Re: Ping -> multiple replies per request

No every second I get for example 4 replies and the statistics are also like that...
3 pings, 12 replies, lost -400% (something like that)
by genesispro
Tue May 17, 2022 11:48 am
Forum: General
Topic: Ping -> multiple replies per request
Replies: 13
Views: 1756

Ping -> multiple replies per request

I have some cases where I ping a device from the mikrotik terminal and I get 3-4 times the ping reply.
What could that mean? It looks weird but I don't know where to start looking.
by genesispro
Sat Feb 19, 2022 10:17 am
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39135

Re: v7.1.2 is released!

In one of my setups I upgraded from latest 6 to 7.1.2 and I had many issues. The setup was running fine for 6+ months. Lots of ping timeouts (50% sometimes). The main router is a CCR2004-1G-12S+2XS and the switches are CRS328-24P-4S+ After trying to figure out what was wrong it was finally solved wh...
by genesispro
Wed Feb 02, 2022 1:15 pm
Forum: General
Topic: docker + nginx = https full proxy on RouterOS? finally possible?
Replies: 1
Views: 2235

docker + nginx = https full proxy on RouterOS? finally possible?

Since IPv4 prices raise a lot lately I have started looking for a way to forward traffic according to the header destination hostname to be able to host behind one mikrotik multiple web servers. Unfortunately TLS host filter does not work on NAT! I know that nginx server is capable of doing that.......
by genesispro
Mon Jan 10, 2022 10:31 am
Forum: The Dude
Topic: Dude for 7.1?
Replies: 42
Views: 42849

Re: Dude for 7.1?

Docker is cool, but dude is used in MAAAAANY installations already, so I would try to finish the dude first and then fix the docker!
by genesispro
Fri Jan 07, 2022 2:01 pm
Forum: The Dude
Topic: Dude Client unable to connect, stuck on "getting stuff" [SOLVED]
Replies: 24
Views: 21510

Re: Dude Client unable to connect, stuck on "getting stuff" [SOLVED]

mine is solved too.... I tried a lot playing with the mtu and finally I ended up adding the ether interface in a bridge and now it works in less than 1 second Thank you for your feedback. Did you change something in bridge configuration about MTU or did you leave it as default? I tried changing bot...
by genesispro
Wed Jan 05, 2022 9:59 pm
Forum: The Dude
Topic: Dude Client unable to connect, stuck on "getting stuff" [SOLVED]
Replies: 24
Views: 21510

Re: Dude Client unable to connect, stuck on "getting stuff" [SOLVED]

mine is solved too.... I tried a lot playing with the mtu and finally I ended up adding the ether interface in a bridge and now it works in less than 1 second
by genesispro
Fri Dec 17, 2021 12:04 pm
Forum: Wireless Networking
Topic: Feedback : CAPSman tests, coming from Unifi
Replies: 19
Views: 6810

Re: Feedback : CAPSman tests, coming from Unifi

(any trick to make cap client keep settings while capsman is down?)
viewtopic.php?t=177472
by genesispro
Fri Dec 17, 2021 11:27 am
Forum: Wireless Networking
Topic: Feedback : CAPSman tests, coming from Unifi
Replies: 19
Views: 6810

Re: Feedback : CAPSman tests, coming from Unifi

Interesting article and I would be happy to see these improvements. One other thing that is different that I have already suggested in the past but didn't see any action except the very first days of discussion is the fact that ubnt controller is pushing the parameters to the APs and if we loose for...
by genesispro
Tue Dec 07, 2021 8:10 pm
Forum: The Dude
Topic: Dude for 7.1?
Replies: 42
Views: 42849

Re: Dude for 7.1?

What´s the point in having the dude client 7.1 without having the server? weird :S
That could be "god's" sign that it is coming?
by genesispro
Tue Nov 23, 2021 12:12 pm
Forum: The Dude
Topic: Dude for 7.1?
Replies: 42
Views: 42849

Re: Dude for 7.1?

will it be in 2021?
by genesispro
Mon Nov 08, 2021 2:17 pm
Forum: RouterOS beta
Topic: v7 filter dynamic-in set check gateway option not found
Replies: 6
Views: 4495

v7 filter dynamic-in set check gateway option not found

in v6 I used route filters to add "set check gateway" as a dynamic-in filter rule that allowed to check for ping in the automatic routes.

I can't find that option in v7. Is it there on a different location or is it missing that option?
by genesispro
Wed Oct 13, 2021 1:46 pm
Forum: General
Topic: Which self hosted log server / analyzer do you recommend?
Replies: 10
Views: 2376

Re: Which self hosted log server / analyzer do you recommend?

and out of your experience the 500mb/day limit in how many devices sending data would that translate to? Roughly
by genesispro
Wed Oct 13, 2021 10:46 am
Forum: General
Topic: Which self hosted log server / analyzer do you recommend?
Replies: 10
Views: 2376

Re: Which self hosted log server / analyzer do you recommend?

It is not a self hosted open source product though.
I need to use their cloud where I am limited with certain quota
by genesispro
Tue Oct 12, 2021 12:13 pm
Forum: General
Topic: Which self hosted log server / analyzer do you recommend?
Replies: 10
Views: 2376

Which self hosted log server / analyzer do you recommend?

I am in the process of looking for a solution to capture all logs from mikrotiks (and other servers). I would like it to be self hosted and possibly open source, with a web interface to manage data and if possible to analyze incoming data from mikrotiks and trigger notifications. Any personal experi...
by genesispro
Fri Oct 08, 2021 10:24 am
Forum: RouterOS beta
Topic: Dude for v7 coming soon?
Replies: 7
Views: 12255

Re: Dude for v7 coming soon?

pfff yes for now just get yourself a cloud vm and install 6.latest...
unfortunately it is not ready... I hope that we will get something or some information soon
by genesispro
Sun Oct 03, 2021 9:22 am
Forum: The Dude
Topic: Dude Client unable to connect, stuck on "getting stuff" [SOLVED]
Replies: 24
Views: 21510

Re: Dude Client unable to connect, stuck on "getting stuff" [SOLVED]

I also have the Dude with hundreds clients on it and it works great up until the time that I accidentally press the X (close) button at the top right... Then I need to wait for a couple of hours to load. I can't tell why. It is running on a CHR and while it is running it runs instantly! My only issu...
by genesispro
Sun Oct 03, 2021 9:16 am
Forum: General
Topic: CHR instance needed in Germany (or physical MT)
Replies: 3
Views: 961

Re: CHR instance needed in Germany (or physical MT)

at hetzner you can get a cloud vm at 3.5/m.
It is quite nice
by genesispro
Fri Oct 01, 2021 6:41 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

on the same poles I have underneath sxts at 5ghz running for 4 years non stop but of course the reach further and need less aiming
by genesispro
Fri Oct 01, 2021 5:21 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

yes, I am only scanning on the client side!
by genesispro
Fri Oct 01, 2021 1:31 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

well this is the first thing I did of course.... I configured them tested them and then started climbing. But of course after many failed attempts I reset them and reconfigured them but I don't think that I have an error. I should I least see it when I scan ... like I can see another one (also mine ...
by genesispro
Fri Oct 01, 2021 1:10 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

no... I never managed to ever scan the other side not even for 1 second so either it is misconfigured or very badly positioned
by genesispro
Fri Oct 01, 2021 12:22 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

main name="wlan60-1" mtu=1500 l2mtu=1600 mac-address=48:8F:5A:7E:E1:5D arp=enabled arp-timeout=auto region=no-region-set mode=bridge physical-setup=static ssid="adamLHG60" frequency=66000 channel-bonding=off scan-list=58320,60480,62640,64800,66000 force-freq=off password="12...
by genesispro
Fri Oct 01, 2021 9:17 am
Forum: RouterOS beta
Topic: Dude for v7 coming soon?
Replies: 7
Views: 12255

Re: Dude for v7 coming soon?

Yeah I mean the server running on routeros. Not the client. In the meantime I wonder how come they have a client without a server in the same version!
by genesispro
Fri Oct 01, 2021 9:15 am
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

Yes I tried 66000.
I haven't tried to modify some sector something values that I read here and there as they didn't make that much sense to me
by genesispro
Thu Sep 30, 2021 4:25 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

any other recommendations to manage to link my 2 lhg60 mounted and waiting at 2150m distance? Would a future software update help, like in the past that on some versions the distance doubled?
by genesispro
Thu Sep 30, 2021 2:02 pm
Forum: RouterOS beta
Topic: Dude for v7 coming soon?
Replies: 7
Views: 12255

Dude for v7 coming soon?

Is there an estimated release date for the Dude for v7?

And would that have any major differences from the v6?
by genesispro
Wed Sep 29, 2021 10:00 am
Forum: General
Topic: Cloud For Mikrotik Like Omada tplink
Replies: 3
Views: 1759

Re: Cloud For Mikrotik Like Omada tplink

MikroTik do a Capsman feature to manage all AP devices. https://wiki.mikrotik.com/wiki/Manual:CAPsMAN For Omada or UniFi Controleler I use a Oracle VM (2x vm with public ip for always-free) and one is Ubuntu Server with UniFi Controler, second vm is CHR for manage all litle customers and help peopl...
by genesispro
Fri Sep 24, 2021 3:27 pm
Forum: General
Topic: v7rc4 sstp client reconnecting every few seconds [SOLVED]
Replies: 1
Views: 896

Re: v7rc4 sstp client reconnecting every few seconds [SOLVED]

it turned out that there was an issue with the upload bandwidth... (200k) causing lots of disconnects
by genesispro
Fri Sep 24, 2021 10:49 am
Forum: General
Topic: v7rc4 sstp client reconnecting every few seconds [SOLVED]
Replies: 1
Views: 896

v7rc4 sstp client reconnecting every few seconds [SOLVED]

I have 1 installation with v7rc4 where the sstp client is reconnecting every few seconds... between 0-2 minutes.
Any idea?
by genesispro
Fri Sep 24, 2021 10:41 am
Forum: General
Topic: Romon packets not passing through ubnt switch
Replies: 1
Views: 657

Romon packets not passing through ubnt switch

I am taking over a client with multiple mikrotik and ubnt devices. The main router is a mikrotik and I can see via romon all mikrotik devices (WAPs) except the ones connected to a ubnt switch. Layer 3 data travel fine... they get IPs and have proper communication... I am very amateur in ubnt... I ha...
by genesispro
Thu Sep 09, 2021 2:31 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 161810

Re: v7.1rc3 adds Docker (TM) compatible container support

You gave me a reason to start using dockers !!!
by genesispro
Mon Sep 06, 2021 5:05 am
Forum: RouterOS beta
Topic: v7 hetzner cloud private network - interface disabled
Replies: 3
Views: 2474

Re: v7 hetzner cloud private network - interface disabled

Which RouterOS variant did you install? x86 or CHR?

Hetzner Cloud is KVM/Proxmox based. There is a CHR ProxMox installation guide available in the docs.
CHR using dd with the raw image.
To clarify, the main Ethernet interface works. The extra for traffic between VMs isn't
by genesispro
Sun Sep 05, 2021 10:07 am
Forum: RouterOS beta
Topic: v7 hetzner cloud private network - interface disabled
Replies: 3
Views: 2474

v7 hetzner cloud private network - interface disabled

In hetzner cloud I create a private network for my cloud VMs to talk to each other but in v7.1rc2 chr (and previous ones) the interface is automatically created but looks disabled (italics).
In v6.x it works fine but I want to use the wireguard options which is not in the v6
Any idea?

Thanks
by genesispro
Sat Aug 28, 2021 12:41 pm
Forum: Scripting
Topic: print cap details (like ssid) via script for Dude
Replies: 0
Views: 1057

print cap details (like ssid) via script for Dude

I want to print the dynamic details of a wireless cap(client) interface. For example the ssid or how many are activated. I want to use it to show it on dude. something like /interface wireless print count-only where ssid!="" or /interface wireless print 0 ssid I know these are not working ...
by genesispro
Wed Aug 18, 2021 9:42 pm
Forum: General
Topic: CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?
Replies: 11
Views: 2246

Re: CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?

YOU CANT'GO BACK (for now)
DO NOT INSTALL BETA!!! (oh...)
Keep the 7.0.4
will do ;)
cross fingers
by genesispro
Wed Aug 18, 2021 3:10 pm
Forum: General
Topic: CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?
Replies: 11
Views: 2246

Re: CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?

is it stable enough to keep it for the customer? that is the real question !!!
by genesispro
Wed Aug 18, 2021 3:09 pm
Forum: General
Topic: CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?
Replies: 11
Views: 2246

Re: CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?

I have been using the betas since they came out.
I only removed it from a 4011 because it bricked several times without keeping the settings on flash (keep previous configuration on) out of sudden and I moved it back after 3-4 months to 6.48.3.

I was surprised when I show the 7.0x stable
by genesispro
Wed Aug 18, 2021 1:50 pm
Forum: General
Topic: CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?
Replies: 11
Views: 2246

CCR2004-16G-2S+ shipped with 7.0.4 STABLE is that for real?

I just picked up a new CCR2004-16G-2S+ and the software version on that was 7.0.4 (stable)... is that for real?
Do I keep it?
Is it a real stable?

If I look for stable update it shows me the 6.48.3!

Is it a dream?
by genesispro
Tue Aug 10, 2021 11:18 am
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

Re: any trick to make cap client keep settings while capsman is down?

We have this already in our "feature wishlist" for future. Just wanted to hear your ideas how to implement it. 1) Well you have a polling timer at the moment at around 5-10", so to start with you could make that time range dynamic so we could set it to 1 year for example 2) You need ...
by genesispro
Tue Aug 10, 2021 10:14 am
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

Re: any trick to make cap client keep settings while capsman is down?

But if you can't reach CAPsMAN, don't you also lose connection to the gateway / internet? If so, how useful is to keep settings? @Normis please consider to ask to the staff, if is possible, to cache capsman settings for given amount of time... The customers is online, all works, but REMOTE connecti...
by genesispro
Mon Aug 09, 2021 10:33 pm
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

Re: any trick to make cap client keep settings while capsman is down?

This is very interesting, so huge volume, and capsman works from a cloud controller setup. So instead of your router at home controlling all the APS in the house, you have a CHR or some model in a server farm some where that can dictates capsmans to all the ground units?? Further you want some assu...
by genesispro
Mon Aug 09, 2021 10:11 pm
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

Re: any trick to make cap client keep settings while capsman is down?

It's incredible... I use two CCR every 250 user for redundancy, and I read about one RouterBOARD to rule them all...

Let me give my opinion, but a one-size-fits-all CAPsMAN server is great bullshit...
You are probably not using local forwarding then which has a huge positive impact on speed
by genesispro
Mon Aug 09, 2021 8:19 pm
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

Re: any trick to make cap client keep settings while capsman is down?

But if you can't reach CAPsMAN, don't you also lose connection to the gateway / internet? If so, how useful is to keep settings? Hey Normis, long time no see without MUMs...!!! I hope that they will start this winter to meet again! I would like to change to all sites from non capsman mode to capsma...
by genesispro
Mon Aug 09, 2021 7:56 pm
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

Re: any trick to make cap client keep settings while capsman is down?

Is like you are dying of thirst, they offer you some tea, but you refuse because sometimes you don't drink it... And about the problem on other topic, for sure the problem is one of your setings. Why write that? Because do not use CAPsMAN everywhere for HotSpot, and till now the problems reported a...
by genesispro
Mon Aug 09, 2021 7:14 pm
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

Re: any trick to make cap client keep settings while capsman is down?

check with NetWatch if the CAPsMAN are reachable, if not, disable CAP inside the AP, when CAPsMAN come back again, enable CAP on AP again. Obviously before you enable the CAP on AP, you must set correctly all parameters like CAPsMAN do not exist. I don't want to do that because I am having a certai...
by genesispro
Mon Aug 09, 2021 6:30 pm
Forum: General
Topic: any trick to make cap client keep settings while capsman is down?
Replies: 21
Views: 3487

any trick to make cap client keep settings while capsman is down?

I am trying to create a cloud capsman controller just to hand out settings to cap clients but I need somehow the caps to keep the settings until the next time that they will see the capsman controller on. If the controller is off I want them to keep working with the latest settings. Of course that s...
by genesispro
Mon Aug 09, 2021 1:14 pm
Forum: Wireless Networking
Topic: received deauth: class 3 frame received (7) -> using capsman no problem [SOLVED]
Replies: 6
Views: 9890

received deauth: class 3 frame received (7) -> using capsman no problem [SOLVED]

I have an issue with several android phones where I get the following error: ....@wlan2: disconnected, received deauth: class 3 frame received (7) some of them connect immediately, some of them connect in 1/5 tries and some of them 1/10 tries with the above error. The same AP (WAP AC v6.48.3) if I c...
by genesispro
Wed Jul 28, 2021 11:35 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

No. When a switch port comes up (device turned on or cable connected) no traffic passes, on receiving the first packet from a device the switch sends an Access-Request to the RADIUS server, when the Access-Accept is returned to the switch the port is set to untagged for the specified VLAN. If clien...
by genesispro
Wed Jul 28, 2021 11:18 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

The dot1x setup should do just that - any client device is becomes an untagged member of the VLAN sent from the RADIUS server to the switch. The configuration of a switch would help. So the client gets the info and starts sending out already tagged data or the switch arranged to tag all untagged da...
by genesispro
Wed Jul 28, 2021 6:59 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

I just noticed if I understand well that the vlan information is passed to the client and not to the switch itself! The laptop gets the vlanid but a grandstream phone doesn't despite the information on my dot1x active clients shows the vlan ID. I thought that the switch would tag the untagged traffi...
by genesispro
Tue Jul 27, 2021 10:28 am
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

I managed to do it but it has a stupid requirement to have the bridge vlan filter on else it won't work. One of my devices is a crs112 poe switch and the moment I enable it I loose hardware offloading. If I don't enable it I can see it in the dot1x active clients with the VLAN ID that I assigned but...
by genesispro
Mon Jul 26, 2021 6:34 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

So 801.1X MAC-based authorisation then, per the second paragraph in my previous post it is completely transparent to the devices being plugged in.
So I need to set all switch ports as dot1x authenticators if I understand correctly?
==> except the uplink port
?
by genesispro
Mon Jul 26, 2021 2:55 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

Windows requires the inbuilt supplicant to be running in order to handle EAPOL for EAP username/password or certificate-based connection. I don't know if it is enabled by default, it wasn't on older versions of Windows. For 802.1X MAC-based authorisation (there is no authentication as MACs can easi...
by genesispro
Mon Jul 26, 2021 2:27 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

I don't think you can do it just like that without 802.1X, which is standard solution towards wired per-port security. While there are some hooks in mikrotik's DHCP server to work with radius, this doesn't cut the corner because at the end of the day, it's the access switch (where some end device i...
by genesispro
Mon Jul 26, 2021 1:21 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

I also noticed with this approach that devices with Windows would need to create a dot1x dialup/interface or something like it to be able to connect? I don't want that! I want the moment a device is plugged to the network to get a vlan ID according to its mac address. I don't want lan devices to nee...
by genesispro
Sun Jul 25, 2021 4:07 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

This is what I was trying but I didn't make it. Is there another example apart from the wiki to understand it? I reached a point were I could be on click away or miles away and I couldn't understand what was wrong.
by genesispro
Sun Jul 25, 2021 3:20 pm
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

Re: vlan by mac address on LAN with multiple mikrotik switches

Radius can help, but only if LAN forces authentication process for all devices. The authentication process then needs to invilve radius server and might be WiFi WPA2 (the enterprise version) or 802.1X. If the network doesn't enforce authentication, then you could configure MAC-based VLAN on all acc...
by genesispro
Sun Jul 25, 2021 10:10 am
Forum: General
Topic: vlan by mac address on LAN with multiple mikrotik switches
Replies: 19
Views: 5211

vlan by mac address on LAN with multiple mikrotik switches

Is it possible to assign a VLAN via radius on an ethernet client in setup where all routers/switches are mikrotiks? In other words I want a certain device to get a certain vlan ID where ever it is plugged on the network. For example an ip phone that is on a VLAN for voip to always get the vlan ID th...
by genesispro
Mon Jul 12, 2021 9:29 am
Forum: Wireless Networking
Topic: Capsman+Radius+Vlan doesn't work
Replies: 0
Views: 1059

Capsman+Radius+Vlan doesn't work

I am trying to pass the Vlan ID via freeradius but the wireless clients won't accept it. I am using local forwarding. ROS 7.1b6
by genesispro
Sat Jun 19, 2021 1:04 pm
Forum: RouterOS beta
Topic: Configuring RouterOS as a wireguard client
Replies: 15
Views: 36922

Re: Configuring RouterOS as a wireguard client

to tell you the truth I am also having the same problem and I THINK that I have followed the wiki 5 times without a mistake! I am able to connect windows and android but not from a mikrotik (same version). I am also wondering since this came up how can I tell when a client is connected on the server...
by genesispro
Thu Jun 10, 2021 6:43 pm
Forum: General
Topic: omg new WapAC eth2 is not passive poeout from eth1?
Replies: 10
Views: 1501

Re: omg new WapAC eth2 is not passive poeout from eth1?

..I didn't check and as a matter of fact I have bought and installed 30 of them in a customer... Where is PoE out? https://mikrotik.com/product/wap_ac Your fault. If you work and are payed from someone to do a work, you must have the full knowledge of the product before accept the works. You open t...
by genesispro
Thu Jun 10, 2021 3:52 pm
Forum: General
Topic: omg new WapAC eth2 is not passive poeout from eth1?
Replies: 10
Views: 1501

Re: omg new WapAC eth2 is not passive poeout from eth1?

Yes, that is what it is. Really sad...
Especially as cAP ac does have poe out.
Indeed that was my intention and I didn't check and as a matter of fact I have bought and installed 30 of them in a customer
by genesispro
Thu Jun 10, 2021 3:30 pm
Forum: General
Topic: omg new WapAC eth2 is not passive poeout from eth1?
Replies: 10
Views: 1501

omg new WapAC eth2 is not passive poeout from eth1?

Did I just realize that the ether2 of the new WapAC is not passive poe out from the power coming from poe1...
Is that for real?
Or I am missing to enable something!

If that is the case I must say that I am pretty disappointed!!!
by genesispro
Wed Jun 09, 2021 12:10 am
Forum: The Dude
Topic: Cheapest hardware for Dude Server
Replies: 9
Views: 8579

Re: Cheapest hardware for Dude Server

2.5/m a vm in hetzner
by genesispro
Tue Jun 08, 2021 8:00 pm
Forum: RouterOS beta
Topic: Wireguard and radius and connected clients
Replies: 3
Views: 5462

Wireguard and radius and connected clients

1. Will Wireguard server be able ever to authenticate a client by a call to a radius server?

2. Is there a way to see which clients are connected to the server like the active connections in the PPP?
by genesispro
Fri Jun 04, 2021 11:01 am
Forum: General
Topic: Is there a problem with IP Cloud? [SOLVED]
Replies: 61
Views: 22844

Re: Is there a problem with IP Cloud? [SOLVED]

it just worked for me
by genesispro
Fri Jun 04, 2021 8:10 am
Forum: General
Topic: Is there a problem with IP Cloud? [SOLVED]
Replies: 61
Views: 22844

Re: Is there a problem with IP Cloud? [SOLVED]

I also have the same problem.
The ip won't update even if I force update
by genesispro
Thu Jun 03, 2021 8:28 pm
Forum: General
Topic: 2x CRS328-24P-4S+ with broken ports - short circuit
Replies: 4
Views: 812

Re: 2x CRS328-24P-4S+ with broken ports - short circuit

Use gigabit PoE surge protector,
sometime parasite currents can happen between two devices
in 100+ network devices?
by genesispro
Thu Jun 03, 2021 3:07 pm
Forum: General
Topic: 2x CRS328-24P-4S+ with broken ports - short circuit
Replies: 4
Views: 812

2x CRS328-24P-4S+ with broken ports - short circuit

I have an installation with 5 CRS328-24P-4S+ and within 2 months it is the second device that a utp port is "broken" I get the "short circuit" notification even with NO device connected to it. I tried to remove the power plug and plug it back it but still no luck. I also tried up...
by genesispro
Wed May 19, 2021 4:29 pm
Forum: General
Topic: Wap R - Vodafone Greece - Registration status: denied
Replies: 2
Views: 1027

Re: Wap R - Vodafone Greece - Registration status: denied

indeed it ended up 2 things... one the provider (Vodafone) had enabled 3G only so the LTE only modem wouldn't connect and 2/5 sims that where handed to me had different apn despite that they where on the same provider bought all together
by genesispro
Mon May 17, 2021 8:08 pm
Forum: General
Topic: Wap R - Vodafone Greece - Registration status: denied
Replies: 2
Views: 1027

Wap R - Vodafone Greece - Registration status: denied

I bought for a customer 5 Wap R devices to use them with Vodafone Greece network. I get Registration status: denied and in the logs I also see lte1: rcvd +CME ERROR: Not camped on cell I upgraded the modem to the latest revision revision: R11e-4G_V007 but still nothing. I also get failure: Roaming b...
by genesispro
Thu Apr 29, 2021 11:59 am
Forum: The Dude
Topic: Use Dude to monitor linux server and/or Proxmox
Replies: 5
Views: 9443

Use Dude to monitor linux server and/or Proxmox

Is there any information on how to monitor linux servers and preferably Proxmox using the Dude? I have only managed to install snmpd service and see some basic oids in the dude. I would like to get disk statuses, thermal info, cpu and disk usage stati, VM stats etc Is there any good source of inform...
by genesispro
Fri Apr 23, 2021 10:54 am
Forum: The Dude
Topic: ccr2004 - cannot find the temperature oid
Replies: 7
Views: 8145

Re: ccr2004 - cannot find the temperature oid

yes I know I could limit the value, thank you anyway.
At least this way I will be showing all values.
I will use the first option to trigger an event
by genesispro
Thu Apr 22, 2021 6:54 pm
Forum: The Dude
Topic: ccr2004 - cannot find the temperature oid
Replies: 7
Views: 8145

Re: ccr2004 - cannot find the temperature oid

system health oid returns temperature: .1.3.6.1.4.1.14988.1.1.3.10.0 cpu-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0 psu1-state: .1.3.6.1.4.1.14988.1.1.3.15.0 psu2-state: .1.3.6.1.4.1.14988.1.1.3.16.0 fan1-speed: .1.3.6.1.4.1.14988.1.1.3.17.0 fan2-speed: .1.3.6.1.4.1.14988.1.1.3.18.0 but none of them...
by genesispro
Thu Apr 22, 2021 4:49 pm
Forum: The Dude
Topic: ccr2004 - cannot find the temperature oid
Replies: 7
Views: 8145

Re: ccr2004 - cannot find the temperature oid

I have sfp modules and I can see in system health several motherboard cpu and plain temperature readings.
The following are the ones that I can see related to temperature in System-Health:
board-temperature1
board-temperature2
cpu-temperature
temperature
by genesispro
Thu Apr 22, 2021 12:14 pm
Forum: The Dude
Topic: ccr2004 - cannot find the temperature oid
Replies: 7
Views: 8145

ccr2004 - cannot find the temperature oid

does anyone know the oid values to monitor the CCR2004 temperatures?
iso.3.6.1.4.1.14988.1.1.3.10.0 is not working for this model
by genesispro
Wed Apr 21, 2021 1:34 pm
Forum: The Dude
Topic: Pull data from Dude sqlite database
Replies: 2
Views: 7046

Re: Pull data from Dude sqlite database

hmmm would it also connect to a live dude db file?
If yes have you also tried to modify it and see the changes live in the Dude?
by genesispro
Mon Apr 19, 2021 12:16 pm
Forum: General
Topic: multiple l2tp from same public IP to same server issue
Replies: 2
Views: 2556

Re: multiple l2tp from same public IP to same server issue

in other words we need to choose a different vpn solution...
the working but slow sstp or the ovpn?

would the caller ID type help at all?
setting ip address -> number
and/or one session per host options of l2tp server?
by genesispro
Mon Apr 19, 2021 11:26 am
Forum: General
Topic: multiple l2tp from same public IP to same server issue
Replies: 2
Views: 2556

multiple l2tp from same public IP to same server issue

I have an issue with l2tp/IPSEC vpn. I have a mikrotik connected via vpn to the vpn server (mikrotik as well). If a user connects with his laptop from the same public ip to the same server it drops the initial mikrotik vpn connection. The user had it to his laptop to use it when is out in the road b...
by genesispro
Thu Apr 15, 2021 10:41 am
Forum: The Dude
Topic: getting stuff "forever" - Dude
Replies: 1
Views: 8277

getting stuff "forever" - Dude

Is there any way to improve dude startup ... I have a dude with 100 devices which sometimes takes 2' stuck in "getting stuff" to load... and I have a big one with possibly more than 1000 which if I by mistake exit dude then it needs 2-3+ hours to manage to load. The moment it loads it runs...
by genesispro
Mon Mar 22, 2021 3:28 pm
Forum: Virtualization
Topic: How to change x86 to CHR?
Replies: 3
Views: 6654

Re: How to change x86 to CHR?

Why don't you export the configuration of the x86, then do a fresh install of chr and import the config? It should be quite fast and easy. Answer from MT support: ............ Olga Ļ.4 hours ago Hello! If you want to use CHR you should use CHR image for this. It is not possible to make CHR from x86 ...
by genesispro
Fri Mar 12, 2021 10:27 am
Forum: Wireless Networking
Topic: cAP to connect CAPSMAN layer3 instead layer2
Replies: 4
Views: 1108

Re: cAP to connect CAPSMAN layer3 instead layer2

well I guess removing the IP of the capsman and keeping only the interface would force it to connect only via Layer2
by genesispro
Tue Feb 23, 2021 3:52 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

so will the lhg60 ever reach 5-10km with a software update or is it limited by free bands?
1.5km comparing 12km is a big difference!
by genesispro
Mon Feb 22, 2021 2:47 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

pfff Ubiquiti AirFiber 60 LR claims it can reach more than 12km when lhg60 only does 1.5 ?????
by genesispro
Tue Feb 09, 2021 12:09 pm
Forum: General
Topic: SIP - Freepbx - Need to clear manually the NAT table to reconnect
Replies: 1
Views: 657

SIP - Freepbx - Need to clear manually the NAT table to reconnect

Several times I have the problem where the trunk is disconnected and the solution to that is to clear the ip/firewall/connections (actually I only need the sip related... 5060 ones). I tried disabling/enabling the SIP service in the mikrotik but it didn't help. This is happening to several installat...
by genesispro
Tue Feb 09, 2021 10:57 am
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 56483

Re: v7.1beta4 [development] is released!

I get L2TP connection rejected no IPsec encryption while it was required towards 1/5 vpn servers that I need to connect. It is connecting to the other 4/5 servers also l2tp/ipsec based. It has been working before. I also tried to update the vpn server that doesn't accept it to latest beta (6.49beta1...
by genesispro
Mon Feb 08, 2021 10:26 am
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 56483

Re: v7.1beta4 [development] is released!

any plan for dude v7?
by genesispro
Wed Dec 23, 2020 10:44 am
Forum: Wireless Networking
Topic: area with 700 wifi users. mANTBox ? WapAC? other?
Replies: 14
Views: 3671

Re: area with 700 wifi users. mANTBox ? WapAC? other?

You can do it whit MT, but You wont like what I will say. That is a high density network and you can use stadium AP deployment method. (don't quote me on name) Every AP can handle around 25 users. You count 25 chairs in cycle and deploy AP under them. Adjust TX gain, channel etc so on AP handles ar...
by genesispro
Sun Dec 20, 2020 11:05 am
Forum: Wireless Networking
Topic: area with 700 wifi users. mANTBox ? WapAC? other?
Replies: 14
Views: 3671

Re: area with 700 wifi users. mANTBox ? WapAC? other?

mANTBox would also be that bad?
As I said I am allergic to non mikrotik devices :)

No success stories anyone?
Or at least some theoretical approach?
by genesispro
Sat Dec 19, 2020 10:41 am
Forum: Wireless Networking
Topic: area with 700 wifi users. mANTBox ? WapAC? other?
Replies: 14
Views: 3671

area with 700 wifi users. mANTBox ? WapAC? other?

what would you recommend for an external area of around 700 wifi users. An outdoor theater. Would you advice a 1 mANTBox 15s + 1 MikroTik mANTBox 2 12s would that handle all connections fine? Would 3-4 wapacs handle it better? Maybe 2x MikroTik mANTBox 52 15s ? I am just not sure that 60 degrees on ...
by genesispro
Mon Nov 02, 2020 11:17 am
Forum: Useful user articles
Topic: looking for c# vpn client code that will connect to mikrotik l2tp or wireguard server
Replies: 2
Views: 7681

Re: looking for c# vpn client code that will connect to mikrotik l2tp or wireguard server

I already checked those but they are not helpful.
Most are pptp, 1 paid, 1 cisco, 1 watchdog vpn to do something
by genesispro
Mon Nov 02, 2020 10:58 am
Forum: Useful user articles
Topic: looking for c# vpn client code that will connect to mikrotik l2tp or wireguard server
Replies: 2
Views: 7681

looking for c# vpn client code that will connect to mikrotik l2tp or wireguard server

I want to build an application in c# and mobile in the future to be able to create a "soft" vpn connection to a mikrotik vpn server using l2tp or wireguard (ros 7.*).
Any information could be handy!
by genesispro
Tue Oct 20, 2020 2:50 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

could you tell me the version that you are using? I couldn't even scan it at all! Any special considerations for installation? It is my first LHG installation Running Wireless Wire Dish 2080m, today is snowing and signal -60, speed 1155. Normally -58 and some 1800-1900. Also 1600m with -55 and 2310 ...
by genesispro
Tue Oct 20, 2020 2:48 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

Latest stable 6.47.4, should I try testing 6.48beta48?
by genesispro
Tue Oct 20, 2020 9:44 am
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

Re: LHG 60 does not connect at 2150m with los and perfect weather :(

It was worth a try... if only I could achieve 20-30% of its capability at that distance I would be excited! Does anyone know if it could improve in the near future with a software upgrade like in the past with the wap60g? It would be great... I left the antennas on the spot waiting for something to ...
by genesispro
Sun Oct 18, 2020 7:01 pm
Forum: Wireless Networking
Topic: LHG 60 does not connect at 2150m with los and perfect weather :(
Replies: 47
Views: 6968

LHG 60 does not connect at 2150m with los and perfect weather :(

Did anyone made it work at such distance?
It won't even scan it at all!
Password is correct because when i have them next to each other it works/connects.
Any magic solution?
I want to remove an overcrowded 5ghz link which only does 15mbs when it used to do over 70mbs
by genesispro
Wed Jul 29, 2020 10:52 am
Forum: General
Topic: antenna-gain setting lost from winbox
Replies: 1
Views: 2515

antenna-gain setting lost from winbox

it looks like that I have lost the option antenna-gain from winbox wireless advanced settings
I can set it from terminal but can't find the option in winbox anymore.
Is it moved? Or removed by mistake?
Thx
by genesispro
Mon Feb 17, 2020 1:19 pm
Forum: Wireless Networking
Topic: LHG 60G works at 2150m distance?
Replies: 4
Views: 3220

Re: LHG 60G works at 2150m distance?

Stability is more important than too high bandwidth At what distance is yours? Our longest Link is 1877m in Germany. This link drowse with every normal rain. More then 2km I would not go if this is a link with high Stability wishes. Links about 700-800m never drops..... Why you are looking for 60Gh...
by genesispro
Mon Feb 17, 2020 11:50 am
Forum: Wireless Networking
Topic: LHG 60G works at 2150m distance?
Replies: 4
Views: 3220

Re: LHG 60G works at 2150m distance?

With snow we have problems with short links. I would not go beyond a mile. Well there is no snow in Santorini but there is frequent strong wind and fog, would it affect it that much? Something like 500mbps full duplex would already be too much. Stability is more important than too high bandwidth At...
by genesispro
Mon Feb 17, 2020 10:48 am
Forum: Wireless Networking
Topic: LHG 60G works at 2150m distance?
Replies: 4
Views: 3220

LHG 60G works at 2150m distance?

I have a 5ghz link at 2150m distance.
I am wondering if a set of LGH60G would work fine at that distance.
Has anyone tested a similar setup?
Any information would be appreciated
by genesispro
Tue Nov 26, 2019 4:18 pm
Forum: General
Topic: Is MLPPP server coming anytime soon? Or an alternative solution?
Replies: 0
Views: 774

Is MLPPP server coming anytime soon? Or an alternative solution?

"Presently there are no MLPPP server support available"
Is it coming out anytime soon? Is there a workaround or a third party easy solution?
by genesispro
Sun Nov 17, 2019 10:44 am
Forum: The Dude
Topic: Move device between maps
Replies: 11
Views: 12283

Re: Move device between maps

the problem with copy/paste is that it won't copy the device history... outages etc
by genesispro
Mon Oct 28, 2019 10:24 am
Forum: RouterOS beta
Topic: v7beta3 issues
Replies: 4
Views: 5273

Re: v7beta3 issues

the moment I add an EoIP interface to a fresh installed CHR it boots and keeps rebooting for ever. It reaches the login prompt and in 1 second it reboots. I tried to install from scratch and add with only the remote ip address removing also the allow fast path option but same results version used 7....
by genesispro
Fri Oct 04, 2019 7:12 am
Forum: Wireless Networking
Topic: station bridge / pseudobridge when bridges only 1 ip gets through
Replies: 7
Views: 5569

Re: station bridge / pseudobridge when bridges only 1 ip gets through

Indeed station bridge is not connecting to capsman controlled ap.
It wasn't clear.
Although it is pitty having to remove cap from an AP just to enable wireless bridging in a 4-5+ APs setup.
Zacharia your name sound Greek, will I see you in the MUM?
by genesispro
Thu Oct 03, 2019 5:12 pm
Forum: Wireless Networking
Topic: station bridge / pseudobridge when bridges only 1 ip gets through
Replies: 7
Views: 5569

Re: station bridge / pseudobridge when bridges only 1 ip gets through

it makes more sense now,
should we expect any bridging feature by capsman any time soon?
Mikrotik guys you could announce it in the MUM in Greece in 2 weeks... ;)
See you there
by genesispro
Thu Oct 03, 2019 3:45 pm
Forum: Wireless Networking
Topic: station bridge / pseudobridge when bridges only 1 ip gets through
Replies: 7
Views: 5569

station bridge / pseudobridge when bridges only 1 ip gets through

when I create a station bridge or pseudobridge and bridge it with an ethernet adapter for some reason only one device get ip and proper traffic behind it. if for example I add a dhcp-client on that bridge and I get an IP then the device on the ethernet interface does not get an IP... or if I add mor...
by genesispro
Sat Sep 28, 2019 4:53 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101178

Re: RouterOS v7.0beta1 (ARM)

beta2 tested the following >>> capsman - improved compatibility between v6 and v7 versions; now cap client routeros6 connect to capsman routeros7 ONLY IF certificates are used AND layer2 communication (not IP) without certificates it never connects with certificates and with IP it connects and gets ...
by genesispro
Wed Sep 11, 2019 12:01 pm
Forum: RouterOS beta
Topic: cAP ac: no capsman [SOLVED]
Replies: 9
Views: 15282

Re: cAP ac: no capsman [SOLVED]

same here 3011 capsman v7 >> cap clients on hapac latest v6 not associating also with certificates
so we have to wait for a mips v7 I guess
sounds like capsman v3 which is not compatible with capsman v2
by genesispro
Sat Sep 07, 2019 12:02 am
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101178

Re: RouterOS v7.0beta1 (ARM)

another issue... that I created a workaround ppoe client (to the ISP) connects but the route that it is adding is not working... I had to create and run the following script to add a proper route that works /ip/route/set [find where comment="pppoe"] gateway=([:pick [/ip/address/print as-va...
by genesispro
Fri Sep 06, 2019 10:53 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101178

Re: RouterOS v7.0beta1 (ARM)

I upgraded my RB3011UiAS fine...
poe out on port10 is not recognized as poe and not working as poe
Capsman server is not working... clients won't connect... clients are all hapAC so I can't upgrade them to v7 too
CAP faild to join router .... handshake failed: error 140870e8 (6)
by genesispro
Fri Sep 06, 2019 3:53 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 256247

Re: RouterOS v7.0 beta1 - when?

anyone installed it on a 4011 yet?
Yup. Got 1 kernel panic so definitely would run this in lab only
and you flashed it back to 6.x?
by genesispro
Fri Sep 06, 2019 3:02 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 256247

Re: RouterOS v7.0 beta1 - when?

anyone installed it on a 4011 yet?
by genesispro
Fri Aug 09, 2019 6:09 pm
Forum: Announcements
Topic: v6.46beta [testing] is released!
Replies: 150
Views: 106209

Re: v6.46beta [testing] is released!

winbox - added "https-redirect" parameter to "IP/Hotspot/Profiles menu"; ????
That could be something very promising ... but is it?
Any information about it?
by genesispro
Mon Jul 15, 2019 4:01 pm
Forum: General
Topic: Bonding-alb over eoip doesn't seem to work to bond asymmetric lines
Replies: 2
Views: 1294

Re: Bonding-alb over eoip doesn't seem to work to bond asymmetric lines

anyone any idea or a different approach?
by genesispro
Wed Jul 10, 2019 9:17 pm
Forum: General
Topic: Bonding-alb over eoip doesn't seem to work to bond asymmetric lines
Replies: 2
Views: 1294

Bonding-alb over eoip doesn't seem to work to bond asymmetric lines

I have 2 WANs with eoip tunnels to a chr in a datacenter. I created a bonding interface on both ends with the 2 eoip interface in order to aggregate traffic via the datacenter. balance-rr is working fine balancing data across lines but I want to achieve bonding to asymmetric lines too so theoretical...
by genesispro
Fri Jul 05, 2019 11:24 pm
Forum: General
Topic: special route for l2tp client
Replies: 1
Views: 1397

special route for l2tp client

I want to be able to select a certain gateway/route on certain l2tp client. I am trying to make 2 l2tp connections to 1 ip on a mikrotik running on datacenter. I have 2 Wan interfaces (2 ISPs) and I want each of the l2tp to use each of the WANs that I have to connect to my datacenter. I cannot use t...
by genesispro
Mon Jun 17, 2019 4:27 pm
Forum: General
Topic: Cannot add SSTP interface to a bridge [SOLVED]
Replies: 1
Views: 1212

Re: Cannot add SSTP interface to a bridge [SOLVED]

my bad I forgot I had to add an eoip to add it to the bridge
by genesispro
Mon Jun 17, 2019 4:22 pm
Forum: General
Topic: Cannot add SSTP interface to a bridge [SOLVED]
Replies: 1
Views: 1212

Cannot add SSTP interface to a bridge [SOLVED]

I used to be able to add an sstp interface to a bridge in order to get an "internal" IP from a remote network. I don't have that choice anymore. I tried adding it to an interface list and then add it to the brigde, which I am allowed but this doesn't work. I am using it to get an "int...
by genesispro
Thu Feb 28, 2019 11:48 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 256247

Re: RouterOS v7.0 beta1 - when?

out of curiosity...
which are the key features that the new kernel has that they cannot use at the moment in this kernel?

In other words what would make a big difference (feature or improvement) and CANNOT be implemented in the current kernel?

I am not questioning, I am wondering
by genesispro
Thu Feb 14, 2019 10:56 am
Forum: General
Topic: Guide to (possibly) hack RouterOS ... If yes please protect it
Replies: 10
Views: 5895

Re: Guide to (possibly) hack RouterOS ... If yes please protect it

Since I am not an expert I added the "possibly" word... No matter what it is better to know the "enemy" rather than ignore him... Since this forum is to share our knowledge and findings to improve this wonderful product I posted it. I hope it helps, sorry if it had been re-posted...
by genesispro
Thu Feb 14, 2019 7:36 am
Forum: General
Topic: Guide to (possibly) hack RouterOS ... If yes please protect it
Replies: 10
Views: 5895

Guide to (possibly) hack RouterOS ... If yes please protect it

https://medium.com/tenable-techblog/mak ... 0705459bc6

I am posting for admins to protect the system more if needed.

I couldn't follow it thoroughly to know if indeed it actually works, but it sounded real
by genesispro
Thu Jan 17, 2019 1:54 pm
Forum: General
Topic: v7 routeros
Replies: 12
Views: 5704

Re: v7 routeros

routerOS7 in Greek too: ρούτερΟΣ7
by genesispro
Sun Dec 23, 2018 11:40 am
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 82752

Re: v6.43.8 [stable] is released!

"wireless - improvements in wireless frequency selection;"
Can you be more specific?
I think in the past it was only counting the count and not the quality of a frequency, now?
by genesispro
Wed Aug 08, 2018 1:35 pm
Forum: Announcements
Topic: Winbox v3.17 released!
Replies: 17
Views: 28312

Re: Winbox v3.17 released!

I still get it every time.

If I use the other winbox window and press connect it connects.

When I press the reconnect the last thing I see is logging in... then it fades out. Sometimes it returns to reconnect but still doesn't connect or not show up at all
by genesispro
Wed Aug 08, 2018 12:55 pm
Forum: General
Topic: DPK package is not deleted after boot/installation
Replies: 0
Views: 909

DPK package is not deleted after boot/installation

In version 6.42.6 (maybe earlier) I noticed that the .dpk file that we brand our mikrotiks does not auto delete after boot/installation.

I believe that it should
by genesispro
Wed Aug 08, 2018 12:44 pm
Forum: Announcements
Topic: Winbox v3.17 released!
Replies: 17
Views: 28312

Re: Winbox v3.17 released!

If I get disconnected for example due to reboot I cannot reconnect... I need to open a new winbox session and press connect and then it works.
Pressing the reconnect button looks like it is logging in and fails
by genesispro
Fri Aug 03, 2018 10:17 am
Forum: General
Topic: Dude - changed default port - links and routeros info not working
Replies: 1
Views: 919

Re: Dude - changed default port - links and routeros info not working

also after changing the default winbox port the ros_command is not working

as I mentioned also earlier I have modified the routeros management probe port to the new port that I am using

any help appreciated
by genesispro
Mon Jul 30, 2018 5:06 pm
Forum: General
Topic: Dude - changed default port - links and routeros info not working
Replies: 1
Views: 919

Dude - changed default port - links and routeros info not working

after I modified all of my routeros devices to a non default winbox port the links between the devices using routeros and the routeros info tab are not working.

I have modified the probe "routeros management" port to the one that I am using but still no luck.

what could I do to fix it?
by genesispro
Thu Jul 26, 2018 2:23 pm
Forum: Scripting
Topic: Mikrotik.php file scripts
Replies: 25
Views: 16658

Re: Mikrotik.php file scripts

I used the following command in the dude to fix the sock changes made [ros_command("/ip socks set enabled=no port=1080")] I am also trying to enable all drop firewalls using [ros_command("/ip firewall filter enable [/ip firewall filter find where action=drop]")] but it doesn't wo...
by genesispro
Wed Jul 25, 2018 10:01 pm
Forum: General
Topic: Router compromised [SOLVED]
Replies: 21
Views: 9658

Re: Router compromised [SOLVED]

I also got it and telnet,ssh,www service where disabled
even to version 6.41.3
which version is affected and how is it injected?
by genesispro
Wed Jul 11, 2018 3:09 pm
Forum: Wireless Networking
Topic: LtAP mini LTE kit and Wap LTE Kit are M2M compatible?
Replies: 1
Views: 1346

LtAP mini LTE kit and Wap LTE Kit are M2M compatible?

I am looking for M2M (machine to machine) compatible devices for mikrotiks.

Does the ltap mini LTE or the WAP LTE Kits are compatible?

If not does anyone have some more experience with such a product?

Thank you in advance
by genesispro
Tue Jul 10, 2018 1:50 pm
Forum: General
Topic: Feature requests
Replies: 1740
Views: 632471

Re: Feature requests

Well I use winbox and/or API so with neither I could do it remotely since I would loose at the first step the remote connection I would also like to be possible to set winbox to a state where changes are pending and the moment all changes done to be able to say commit. If for example we have the wan...
by genesispro
Tue Jul 10, 2018 1:19 pm
Forum: General
Topic: Feature requests
Replies: 1740
Views: 632471

Re: Feature requests

I would also like to be possible to set winbox to a state where changes are pending and the moment all changes done to be able to say commit. If for example we have the wan port in a bridge with a dhcp-client on the bridge and the we want to remove it from the bridge remotely and add the dhcp-client...
by genesispro
Tue Jun 19, 2018 3:13 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

I reset it and now it works...
weird because the password is saved as a favorite in winbox so I wasn't typing anything wrong earlier... and right before the update I used the same favorite to login to it and update it!
by genesispro
Tue Jun 19, 2018 2:33 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

I am directly attached to it and still it doesn't work
I upgraded to 6.43rc32 and even using winbox 3.15 login fails!
look problem on your network, for me works fine.
by genesispro
Tue Jun 19, 2018 2:19 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

I upgraded to 6.43rc32 and even using winbox 3.15 login fails!
by genesispro
Fri Jun 08, 2018 11:22 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

I just found another "issue" with the latest version 6.43rc23 the custom default config that I have using the branding tool gets erased. It resets to mikrotik's defaults. Even after I downgrade to stable 6.42.3 and reset it again the default configuration of mikrotik comes up... with the p...
by genesispro
Fri Jun 01, 2018 3:44 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

You don't have to check version. * Send /login with username and password in plain text * if response is with challenge then fall back to old login method * otherwise check status if login is successful As an example see how it is done on python example in the wiki check version one would need if h...
by genesispro
Fri Jun 01, 2018 1:35 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

Could anyone give an example of how to connect in the api PHP in the new version of mikrotik v3.43rc21 https://wiki.mikrotik.com/wiki/Manual:API#Initial_login I modified the php file for now this way and it works... it is not detecting prior version... I hope 6.43 comes out soon to keep it like tha...
by genesispro
Tue May 29, 2018 12:43 pm
Forum: Announcements
Topic: Winbox 3.14 released!
Replies: 77
Views: 58609

Re: Winbox 3.14 released!

Man in the middle attack is not possible, because

*) WinBox now uses ECSRP for key exchange and authentication (requires new winbox version),
both sides now verify that other side knows password (no man in the middle attack is possible anymore);
Nice. Can we see SRP in API login?
+1
by genesispro
Fri May 25, 2018 2:42 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

Basically the last two RouterOS versions have been released for testing purposes for everything besides Winbox. We are working on a new Winbox version and have provided rc version earlier within this topic. When 6.43 and Winbox 3.14 will be released, then both of them will work together just fine. ...
by genesispro
Fri May 25, 2018 2:29 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

I have a feeling that the API calls cannot authenticate now! API authentication method have changed, see API manual: https://wiki.mikrotik.com/wiki/Manual:API#Initial_login I modified it and it seams to work but.... One of my first commands is to modify the username and password but I get a failure...
by genesispro
Thu May 24, 2018 8:04 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

Did anyone manage to use api calls with this version? My php api fails to login (similar to the winbox problem)
by genesispro
Thu May 24, 2018 12:40 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

I have a feeling that the API calls cannot authenticate now!
by genesispro
Thu May 24, 2018 11:31 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

Link to Winbox rc is in the above post, where RC is announced. Please all read the posts. It is not that hard. Indeed it was there, it does work... Thank you It is indeed not that hard but some times we are not given the "gift of time" to read all pages of all posts. I would try to edit a...
by genesispro
Thu May 24, 2018 11:04 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 222478

Re: v6.43rc [release candidate] is released!

same issue here that couldn't login after upgrade... I also used the old winbox and it worked. I don't know where to download winbox 3.14 rc
by genesispro
Sat May 19, 2018 9:47 pm
Forum: Scripting
Topic: SMS delivery notifications
Replies: 1
Views: 1456

SMS delivery notifications

I have created an SMS gateway with a mikrotik and I am using API calls to send smses. I have a problem where if a number is not totally wrong I don't get an error while sending it. Even if a number is short by 1 digit it won't look failed! I want to be able to receive a delivery notification if poss...
by genesispro
Tue May 08, 2018 5:52 pm
Forum: General
Topic: sstpc - ubuntu - sspt client - error
Replies: 2
Views: 2186

Re: sstpc - ubuntu - sspt client - error

The first question is: do we debug only the ubuntu side or the whole setup because the ubuntu is the first client ever you try to connect to this particular SSTP server? sstp is working fine... other mikrotiks can connect ubuntu can't I basically installed ovpn and it works but since we opened this...
by genesispro
Mon May 07, 2018 1:32 pm
Forum: General
Topic: sstpc - ubuntu - sspt client - error
Replies: 2
Views: 2186

sstpc - ubuntu - sspt client - error

I installed the sstp client in ubuntu and when I am trying to connect to the mikrotik sstp server I get the following error **Error: HTTP handshake with server failed, (-1) I can see the connection popping up in the firewall connections but nothing more than that. If you have any experience with thi...
by genesispro
Thu Apr 26, 2018 3:15 pm
Forum: Beginner Basics
Topic: CAPsMAN 2 SSID's with 2 different Radius servers
Replies: 7
Views: 3288

Re: CAPsMAN 2 SSID's with 2 different Radius servers

Any help would be appreciated.
All I want is to define different Radius servers for different SSIDs without hotspots!

SSID1 radius1
SSID2 radius2
.
.
.
by genesispro
Thu Apr 26, 2018 3:13 pm
Forum: Beginner Basics
Topic: Block crypto currency mining
Replies: 3
Views: 6088

Re: Block crypto currency mining

What I am doing so far is use a list of crypto domains 2000+ added to a firewall list and using it to monitor or block traffic towards these servers.
The problem is that if that domain is in a shared hosting also the other domains hosted in that server would be affected
by genesispro
Fri Apr 20, 2018 12:17 pm
Forum: Beginner Basics
Topic: Block crypto currency mining
Replies: 3
Views: 6088

Block crypto currency mining

I have a building with 100+ users. The landlord (our customer) has detected unusual increase in power bills and he is trying to detect and fail proof if possible crypto currency mining that could be increasing significantly the power usage in his building. Is there a way to detect and block that kin...
by genesispro
Wed Apr 11, 2018 10:59 am
Forum: Beginner Basics
Topic: CAPsMAN 2 SSID's with 2 different Radius servers
Replies: 7
Views: 3288

Re: CAPsMAN 2 SSID's with 2 different Radius servers

I need it also and I am not using hotspot.
I just have 2 different SSIDs/subnets which should use different Radius Servers.

Any idea?
by genesispro
Wed Feb 28, 2018 4:03 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 10
Views: 6269

Re: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

Use rc version, see change log:
*) chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
I used the https://download2.mikrotik.com/routeros ... 35.img.zip and it worked like a charm !!!

Thank both of you guys
by genesispro
Wed Feb 28, 2018 2:56 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 10
Views: 6269

Re: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

It doesn't seem to work: I am including here the steps I made boot to rescue mode: CPU1: Intel Xeon Processor (Skylake) (Cores 2) Memory: 3862 MB Disk /dev/sda: 40 GB (=> 38 GiB) Total capacity 38 GiB with 1 Disk ----------------------------------------------------- wget --no-check-certificate https...
by genesispro
Wed Feb 28, 2018 2:05 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 10
Views: 6269

Re: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

You must do the same type of setup as with Linode. Basically you make a new VM, then you boot into Rescue mode and mount your new VM disk to that. Then you download CHR IMG file, and write it to your VM disk. Then reboot to normal. https://wiki.mikrotik.com/wiki/Manual:CHR_Linode https://wiki.hetzn...
by genesispro
Wed Feb 28, 2018 1:28 pm
Forum: General
Topic: CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]
Replies: 10
Views: 6269

CHR cannot be installed in Hetzner Cloud because they need an ISO [SOLVED]

I provided them the non iso images but they cannot use them. They need an iso that will boot and install the OS on the drive like the x86 does!

Any (fast) solutions?
by genesispro
Mon Feb 19, 2018 11:00 am
Forum: General
Topic: Bonjour/multicast from Guest subnet to other network
Replies: 0
Views: 732

Bonjour/multicast from Guest subnet to other network

I have a subnet where all smart tvs and apple tvs are. I want to be able (if possible) these devices to be discoverable via the guest network. I don't have a firewall between the 2 networks. A device from the guests network can access the device to the "TVs" network but cannot run a discov...
by genesispro
Wed Feb 14, 2018 4:58 pm
Forum: Wireless Networking
Topic: Assign different RADIUS servers to different security profiles
Replies: 1
Views: 803

Re: Assign different RADIUS servers to different security profiles

I would use that too
it would have to be available in CAPsMAN too
by genesispro
Tue Feb 13, 2018 2:04 pm
Forum: Scripting
Topic: Scripting - Virtual Static Issue or maybe a bug
Replies: 0
Views: 835

Scripting - Virtual Static Issue or maybe a bug

I have an issue with the information stored in the virtual interfaces made by Capsman. I choose Virtual static in order to be able to add the interfaces in the bridge vlan ports (since I have bridge filter on). Each interface has a different tag. The wlan interfaces transmit the correct SSIDs but wh...
by genesispro
Fri Feb 02, 2018 10:09 am
Forum: Scripting
Topic: change firewall filter order via script or API
Replies: 3
Views: 2930

Re: change firewall filter order via script or API

Use the "move" command. "numbers" argument is the item(s) to move (in the other they must appear after the move), and the "destination" argument is item above which the targeted item(s) are to appear. If "destination" is omitted, the targeted items are moved ...
by genesispro
Fri Feb 02, 2018 10:06 am
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 2865

Re: API set .id * not working - how to set all vi API

Have you compared your code to the first example of PHP API? https://github.com/BenMenking/routeros-api/blob/master/examples/example1.php yes, the problem is that the $this->read() gets only the first item of the array. I modified the api class to run it until no data is returned and the return an ...
by genesispro
Thu Feb 01, 2018 2:52 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 2865

Re: API set .id * not working - how to set all vi API

Still no solution.
Anyone knows why getall only returns the first item?
/interface/ethernet/getall

returns only ether1 in the array instead of all.
that is happening in all getall calls

is there another that will return all findings?
by genesispro
Wed Jan 31, 2018 5:32 pm
Forum: Scripting
Topic: change firewall filter order via script or API
Replies: 3
Views: 2930

change firewall filter order via script or API

Does anyone know how to move a firewall rule from eg row 13 to 1
or from X line to Y line
using script or command line or API call?
by genesispro
Mon Jan 29, 2018 10:10 am
Forum: General
Topic: Feature Request: RAMDisk OR HTTP GET/POST Without Flash Writes [SOLVED]
Replies: 7
Views: 4105

Re: Feature Request: RAMDisk OR HTTP GET/POST Without Flash Writes [SOLVED]

You have been heard, see the latest ROS 6.42rc15:
*) fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
greetings, Daniel
Cool.... !!! I, amongst others, needed that!!!
by genesispro
Sat Jan 27, 2018 8:21 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 139658

Re: v6.41 [current]

I think I found a minor winbox bug @6.41
It allows me to add the same interface list to a bridge port multiple times
by genesispro
Thu Jan 25, 2018 9:46 am
Forum: General
Topic: Forum notifications!
Replies: 8
Views: 2539

Re: Forum notifications!

it was handy
by genesispro
Wed Jan 24, 2018 12:34 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 2865

Re: API set .id * not working - how to set all vi API

Weird I am trying to use the getall to get all the ids to use them but it only returns the first item /interface/getall Array ( [0] => Array ( [.id] => *3 [name] => ether1 ) ) /radius/getall Array ( [0] => Array ( [.id] => *3 [service] => hotspot,wireless ) ) using Mikrotik Version 6.41 and RouterOS...
by genesispro
Tue Jan 23, 2018 3:29 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 2865

Re: API set .id * not working - how to set all vi API

You have to call the "find" command separately to get the (comma separated) list of all IDs. Write that list as the value of .id/numbers.
isn't there a wildcard symbol or regex that I could use instead?
by genesispro
Tue Jan 23, 2018 3:05 pm
Forum: Scripting
Topic: API set .id * not working - how to set all vi API
Replies: 7
Views: 2865

API set .id * not working - how to set all vi API

I am using the php api sending commands.
I am able to set a value using .id = 0 or .id = default and so on.

I want to update all and set for example comments = "test"
I tried
.id=*
.id=''
.id="find"
etc
but it doesn't work.

anyone knows how to do that
by genesispro
Thu Jan 18, 2018 3:12 pm
Forum: Scripting
Topic: Branding autorun only runs the first command of the script
Replies: 4
Views: 1880

Re: Branding autorun only runs the first command of the script

oh finally I spotted it... I had to add a small delay at the beginning of the script
/delay 5;
was more than enough... I reset my device at least 20 times and ti worked 100%
without it 9/10 it would fail
by genesispro
Wed Jan 17, 2018 4:45 pm
Forum: General
Topic: DHCP Accounting Accepts the client without authenticating [SOLVED]
Replies: 2
Views: 2082

Re: DHCP Accounting Accepts the client without authenticating [SOLVED]

yes - use RADIUS for accounting and lease;
accounting - use RADIUS for accounting only.

so according to documentation it is correct.
My bad ...

Yes will do both
by genesispro
Wed Jan 17, 2018 4:08 pm
Forum: General
Topic: DHCP Accounting Accepts the client without authenticating [SOLVED]
Replies: 2
Views: 2082

DHCP Accounting Accepts the client without authenticating [SOLVED]

If I set the use Radius to accounting in the DHCP server option the clients get an IP without authenticating from the radius first. When I have it to YES (not accounting) new clients get an Access-Reject and don't get an IP. radpostauth table of the Radius gets rejected entries. The moment I change ...
by genesispro
Wed Jan 17, 2018 3:58 pm
Forum: Scripting
Topic: Branding autorun only runs the first command of the script
Replies: 4
Views: 1880

Re: Branding autorun only runs the first command of the script

take some running router and type "/export file=name" and then open "name.rsc" for viewing. You will see how the file is made. I know all the above. As I explained the script runs fine on a reset no defaults router from console if I copy all and paste and no errors are produced....
by genesispro
Wed Jan 17, 2018 1:29 pm
Forum: Scripting
Topic: Branding autorun only runs the first command of the script
Replies: 4
Views: 1880

Branding autorun only runs the first command of the script

I am using the branding maker and the autorun.rsc The problem is that for some reason it only executes the first command. If I copy paste the same code to a terminal it works fine. No special commands for example the second command is /ip dhcp-client add disabled=no interface=ether1; and it won't ex...
by genesispro
Thu Jan 04, 2018 1:01 pm
Forum: Wireless Networking
Topic: CAPsMAN Query-Radius Mac Address as Password [SOLVED]
Replies: 1
Views: 2159

CAPsMAN Query-Radius Mac Address as Password [SOLVED]

I created an access list with query-radius action but I want to be able to post the mac address as password as well. At the moment it is posting username: mac address password: <nothing> I want like in the hotspot option mac auth mode - mac as username and password that sends username: mac address p...
by genesispro
Sun Dec 03, 2017 1:21 am
Forum: General
Topic: NAT - Load Balance traffic to be NATed to several destinations
Replies: 3
Views: 1255

Re: NAT - Load Balance traffic to be NATed to several destinations

Thank you very much... I will try it but if you have(handy) a small basic example (export) it would be greeeeeaaaaat Thank you anyway again Yes. You can mangle incoming connections in prerouting chain like a PCC style. Than use connection mark in NAT rules for dst-nating to different web servers. Us...
by genesispro
Wed Nov 29, 2017 6:02 pm
Forum: General
Topic: NAT - Load Balance traffic to be NATed to several destinations
Replies: 3
Views: 1255

NAT - Load Balance traffic to be NATed to several destinations

3 webservers that share the same content connect to one mikrotik. The mikrotik has a nat rule to forward packages with destination port 80 to server1:80 can I load balance with some criteria like the source ip and do for example a round robin to my 3 webservers? In other words to choose dynamically ...
by genesispro
Wed Nov 29, 2017 4:39 pm
Forum: General
Topic: More MUMs in Europe please!!!
Replies: 1
Views: 665

More MUMs in Europe please!!!

Does anyone know any future MUMs in Europe?

Who wants more MUMs in Europe preferably in English?
by genesispro
Thu Nov 16, 2017 10:55 am
Forum: General
Topic: Firmware mikrotik or .dpk push via PXE without netinstall
Replies: 0
Views: 784

Firmware mikrotik or .dpk push via PXE without netinstall

I managed to create a PXE server a mikrotik and I can for example load a mini iso but can I use it to push a .dpk (branding) file to a mikrotik that boots over ethernet (pressing the reset button)?
by genesispro
Tue Oct 31, 2017 5:03 pm
Forum: General
Topic: 2011/3011 Vlan help
Replies: 2
Views: 908

Re: 2011/3011 Vlan help

"It also appears to be possible to bridge the traffic including the VLAN tags but I never used that">>> Indeed I need that as I am not always sure of all the vlan tags to bridge them all... and it would look ugly too but thank you anyway... let's hope someone can advice us how to "swi...
by genesispro
Tue Oct 31, 2017 10:57 am
Forum: General
Topic: 2011/3011 Vlan help
Replies: 2
Views: 908

2011/3011 Vlan help

I have an issue which I believe can easily be solved but I haven't managed to find it myself (yet). In rb2011 and rb3011 we have 2 switch groups. When I master ports 1-5 and 6-10 if I have a VLAN tagged packet on port 5 it arrives fine on port1,2,3,4, also on the same on the second switch group if I...
by genesispro
Fri Oct 20, 2017 11:56 am
Forum: RouterBOARD hardware
Topic: RB3011 in a desktop case with 5Ghz wifi replacement for RB2011UiAS-2HnD-IN
Replies: 10
Views: 3426

Re: RB3011 in a desktop case with 5Ghz wifi replacement for RB2011UiAS-2HnD-IN

Hey Normis, share some of the exciting features and also arrange for a European MUM again... it has been a while since Italy! BTW the most of the exciting products like 24port poe switch, in-wall AP and wireless wire that you showed us there are still not available to buy!!! Currently there is no pl...
by genesispro
Fri Oct 13, 2017 10:42 am
Forum: General
Topic: v6.41x caps/vlan/bridge issue (or bug?)
Replies: 0
Views: 774

v6.41x caps/vlan/bridge issue (or bug?)

If i have a cap client bound to a bridge and I have the local forwarding enabled with a use-tag the wireless tagged traffic does not go through the bridge unless I manually add the dynamic wlan interfaces to the vlan with the current tagged options! If I add them manually then the tagged traffic pas...
by genesispro
Thu Oct 05, 2017 12:33 pm
Forum: General
Topic: Port Forwarding - It should be easy but it isn't [SOLVED]
Replies: 11
Views: 3798

Re: Port Forwarding - It should be easy but it isn't [SOLVED]

I don't that you need the last nat rule.
2 things to check...
does your webserver have the mikrotik as a gateway (192.168.56.1)?
and is the firewall on your webserver accepting incoming traffic on port 80?
by genesispro
Mon Sep 18, 2017 12:49 pm
Forum: Scripting
Topic: failover script without public ip on the mikrotik
Replies: 2
Views: 1496

Re: failover script without public ip on the mikrotik

in this case which dns should I select? The mikrotik cannot use 8.8.8.8 via the second line or 8.8.4.4 via the first line with this config?
I guess I would need 2 IPs other than 8.8.8.8 8.8.4.4 to use them as a check gateway
by genesispro
Fri Sep 15, 2017 4:02 pm
Forum: Scripting
Topic: failover script without public ip on the mikrotik
Replies: 2
Views: 1496

failover script without public ip on the mikrotik

My gateways are both local IPs... 192.168.0.1 192.168.1.1 I use the following script :if ([/ping 8.8.8.8 count=4 interface=ether1] = 0) do={/ip route set distance=3 number=[find comment=telenet]} else={/ip route set distance=1 number=[find comment=telenet]} it hops to WAN2 correctly but the it won't...
by genesispro
Sat Aug 05, 2017 1:30 pm
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 10887

Re: Wap LTE kit supports sms? [SOLVED]

So finally does anyone know if the wap LTE kit with the onboard modem supports SMS?
by genesispro
Sat Aug 05, 2017 11:53 am
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 10887

Re: Wap LTE kit supports sms? [SOLVED]

Normis will it support sms? Because I just bought an SXT LTE to use to send SMSes but it is not working. Also are you planning to support SMS in the SXT LTE? are you sure that your 4g provider support sms via 4g? most of operators doesn't (4g is for traffic and video calls). sxt lte, wap lte (versi...
by genesispro
Sat Aug 05, 2017 10:24 am
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 10887

Re: Wap LTE kit supports sms? [SOLVED]

Normis will it support sms?
Because I just bought an SXT LTE to use to send SMSes but it is not working.

Also are you planning to support SMS in the SXT LTE?
by genesispro
Fri Aug 04, 2017 2:14 am
Forum: RouterBOARD hardware
Topic: Wap LTE kit supports sms? [SOLVED]
Replies: 12
Views: 10887

Wap LTE kit supports sms? [SOLVED]

Will the wap lte kit support sms because the sxt lre doesn't!!!
by genesispro
Wed Jun 21, 2017 3:18 pm
Forum: General
Topic: TR069 with FreeACS
Replies: 68
Views: 162698

Re: TR069 with FreeACS

Can a MikroTik staff member clarify: 1. Does pushing down a config file of type .overwrite also replace the default config (like it does with NetInstall)? I assume not, but just thought I would ask. If it does, great. 2. If it does not, could you add a means of replacing the factory-default config ...
by genesispro
Thu May 11, 2017 3:45 pm
Forum: General
Topic: RAMdisk
Replies: 38
Views: 8745

Re: RAMdisk

indeed a RAMDisk would be very useful to keep sector writes as low as possible!!!
by genesispro
Fri Apr 21, 2017 10:31 pm
Forum: General
Topic: fasttrack and hotspot problem
Replies: 1
Views: 1486

fasttrack and hotspot problem

Weird thing suddenly happened. With the fasttrack activated when a user authenticates to the hotspot he cannot load any website. It pings to the public and it also resolves the dns... browsing doesn't work at all. I realised that it was the fasttrack because the moment I run a torch while the torch ...
by genesispro
Wed Apr 19, 2017 10:25 am
Forum: Scripting
Topic: POST Request with fetch
Replies: 83
Views: 117848

Re: POST Request with fetch

is there a way to post an array of values? eg a /find something like dhcp leases
by genesispro
Thu Apr 13, 2017 4:08 pm
Forum: Scripting
Topic: /tool fetch - to variable [SOLVED]
Replies: 7
Views: 11798

Re: /tool fetch - to variable [SOLVED]

I have a similar problem I want to read the result of a fetch being 1 or 0 and if 1 then do something if 0 do nothing but I always have to write to the flash to read it back unfortunately we should be able to do something like :local answer [/tools fetch url="http://example.com" keep-resul...
by genesispro
Fri Apr 07, 2017 11:47 am
Forum: Scripting
Topic: fetch http-data how to send properly an array
Replies: 4
Views: 4180

Re: fetch http-data how to send properly an array

anyone knows anything that could help?
by genesispro
Wed Apr 05, 2017 5:49 pm
Forum: Scripting
Topic: fetch http-data how to send properly an array
Replies: 4
Views: 4180

fetch http-data how to send properly an array

I cannot find the way to post the data properly using http-data option of fetch command (I know it is only in the RC version still 6.39rc62) I am trying tool fetch http-method=post http-data=$myVar url=http://example.com but I the value is sent as the name of the post variable with an empty value I ...
by genesispro
Mon Mar 27, 2017 1:17 pm
Forum: Wireless Networking
Topic: CAPSMAN - 90% CAPs get 2422 in auto channel
Replies: 1
Views: 1316

CAPSMAN - 90% CAPs get 2422 in auto channel

I am having an issue where I have a building of 149 waps controlled by CAPSMAN and the moment I set their channels to auto they tend to use 2422 channel causing lots of noise to each other. If I do a wireless scan from one of them they get at least 10 nearby waps all with 2422. I am using the latese...
by genesispro
Wed Mar 15, 2017 3:36 pm
Forum: Scripting
Topic: looking for tr-069 consultation
Replies: 0
Views: 865

looking for tr-069 consultation

I am looking for someone experienced for consultation to setup tr-069 "server" and provision mikrotik devices to it and so on.

You can contact me at dimitris@compoint.be or on facebook at https://www.facebook.com/bazas7gr
by genesispro
Thu Feb 16, 2017 12:18 am
Forum: General
Topic: DNS logging
Replies: 5
Views: 13536

Re: DNS logging

Nice one but this approach does not include the client IP that requested it unfortunatelly Well, now it works... at least with 6.37.4. Found out accidentally the other day while trying to send everything but debug to remote log server. system logging add action=memory target=dns Results with: 20:15:...