I still think there is an issue with your edge switch and the fact that vlan 10 is still showing as untagged and 20 and 666 are showing as tagged even though you specifically called out 10 to the tagged and 666 to be untagged.

This is why vlan 20 works but 10 doesn't.

Hi Ropeguru I've taken a look through my EdgeSwitch. See the attached images from my EdgeSwitch. Neatly edited to only show the requested port / vlans. The Vlan Port Configuration, shows all 3 VLANs, 10, 20, 666, here 10 and 20 is tagged, with 666 untagged. The VLAN configuration, shows my trunk, s...

So I've disabled port isolation, and changed my VLAN config, as you can see in the attachment. Still no luck.. Would downgrading the Firmware be a possible idea? - although 2.12 looks to be stable since release.. So the one thing we haven't seen is the configuration from the Edgeswitch. Just want t...

IGMP Snooping still broken for me on RC25...

Anyone using IGMP Snooping?

I have it enabled on a single vlan and do see entries under the igmp tab, but have not tested any further than that.

And this development is still in complete stealth mode with NO transparency!!!

This is the LAST Mikrotik device I will ever purchase..

Can someone from Mikrotik support please explain why we have to dig through months long threads just to see if there is a new version available? Why are you avoiding putting up a pinned item for easier tracking like someone trying to avoid COVID? This whole new set of switches and SwOS Lite seem to...

Can someone from Mikrotik support please explain why we have to dig through months long threads just to see if there is a new version available? Why are you avoiding putting up a pinned item for easier tracking like someone trying to avoid COVID? This whole new set of switches and SwOS Lite seem to ...

If you ask your favourite search engine, you'll find out that it looks like something you don't want to have. It seems to be related to some botnet. Check if you have some unwanted scheduled scripts on your device. Thanks for the reply. Looked in files from WinBox and under system/scripts and nothi...

Adding detail: 11:46:10 echo: dns local query: #417 strtbiz.site. A 11:46:10 echo: dns,packet --- sending udp query to 192.168.1.35:53: 11:46:10 echo: dns,packet id:3705 rd:1 tc:0 aa:0 qr:0 ra:0 QUERY 'no error' 11:46:10 echo: dns,packet question: strtbiz.site.:A:IN 11:46:10 echo: dns,packet --- got...

So I am testing RouterOS7 Beta 3 and with debug turned on, I am seeing dns lookups for strtbiz.site.

What is this connection being used for?

I searched the forums and nothing came up for that domain.

Can you give us a few more details about each port and what is supposed to be traversing them? Like are some suppose to be access ports with a single untagged vlan vs. which are tagged trunk ports? I would update the config on the VLAN tab and set the "VLAN mode" and "VLAN receive&quo...

Ok, so actually looking closer at the routing table, even though I have a vrf setup and a list associated which has the /29 interface in it, the route table still has that interface and /29 in the "main" table and not the vrf_fr2 table. DAc dst-address=23.152.224.112/29 routing-table=main ...

So maybe this is a Wireguard issue, I have no idea. Scenario is that I have the Mikrotik sitting behind a cable router which does NAT for me, so everything on the Mikrotik is straight routing and no NAT. I have the WAN interface set with 10.1.10.2/24 and the gateway is 10.1.10.1 and is, of course, i...

So i have read through other posts about the status of VRF in the beta, but what I don't understand if the big change in the way it is setup. Previously, you would create the vrf, add routing mark, multiple interfaces, and other info. In the beta, you have to add interfaces to a list, which takes wa...

A new testing version 2.13rc12 is available - the VLAN and management connection through SFP+ ports are fixed. Please try upgrading your devices and share your feedback. Below are versions for CSS610-8G-2S+ https://box.mikrotik.com/f/0a98c88515a64596be3d/?dl=1 for CSS610-1Gi-7R-2S+ https://box.mikr...

So mine is showing as SwichOS, not lite, and version 2.12, no rc.

If the case is that this does not work and they are not fixing anytime soon, then they need to recall and refund for every device.

I just purchased this device and looking in the documentation it mentions SwitchOS Lite. I cannot find that anywhere and it does not indicate as such when I login to the switch. Is this just something where the docs need to be updated? This is the link I was looking at: https://wiki.mikrotik.com/wik...

So this issue is fixed. I had apparently used a lowercase s in the config instead of upper case. However still cannot install as I am getting "no harddrive found" as the apu2 boards are SATA and apparently not going to be supported by Mikrotik. At least the is the gist I have gotten when s...

I have a x64 board which doesn't have a graphical interface so all installs have to be completed using a serial console port. Is it possible to use the X64 image and install in this manner? initial boot is fine as I see the isolinux loading, but then the serial port goes dead one the initrd image st...

So I have managed to get ikev2 Phase1 connection made between routeros and a UBNT ERL3. However, I cannot seem to get the policy working. Here is my config: /ip ipsec peer print Flags: X - disabled, D - dynamic 0 address=76.27.xxx.xxx/32 passive=no auth-method=pre-shared-key secret="****" ...