hi, i have following dhcp client script, that's not working until i replace $interface variable with real interface name. according to wiki interface variable should be known for dhcp client script - https://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Client#Properties please check. not working code: :if ...

No, not by specs, but you could try with a standard 802.3af injector (48V). I have had success with the following setup: standard 802.3af switch (Netgrea FS728TP) => mAP2nD => Yealink T46G desktop phone. thank you. could you please explain why should I need so powerful injector? e.g. I can power 2 ...

Greetings all, Can I power Yealink W52P phone DECT base station from mAP2n using mAP2n's standard 24V 0.8A power adapter and RBPOE injector for mAP2n's first ethernet port and second port to Yealink's base station? According specs Yealink supports Power over Ethernet (IEEE 802.3af), Class 2 and requ...

thank you all.
i have known about unsupported by routeros NAT64, but hoped there is still something to forward request.

theme can be closed.

Short answer: no Long answer: Even if RouterOS had something general for tcp connections, it would not help you anyway. thanks. this was not a question about ftp, but about possibility to forward request from ipv6 WAN to ipv4 LAN. there can be any other protocol/port, e.g. http instead of ftp or 80...

Greetings all, i have an old WD network storage, that i can reach from outside per ftp using dstnat rule. /ip firewall filter add action=accept chain=input comment="Accept (established, related)" connection-state=established,related add action=accept chain=input comment="Accept (FTP)&...

solution was already there. thanks for this.

the same with rb951-2n on win7 32bit.
strange that mikrotik didn't leave alternative link to old winbox

hi,

when I try to run wireless tools such as scanner, snopper etc. from laptop that connected to rb951-2n per wi-fi, wireless network become unavailable. is this by design that tools may be executed only from with ethernet connected PC or bug?
I'm using ROS 6.11.

thanx.