Community discussions

MikroTik App

Search found 54 matches

by moazdabsheh
Fri Oct 31, 2014 12:10 am
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

can you please guide me how to do it since i'm a newbie in Mikrotik ?
by moazdabsheh
Thu Oct 30, 2014 12:42 am
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

i still haven't solved this !
any help? someone?
by moazdabsheh
Sat May 17, 2014 2:40 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

I'm sorry moazdabsheh I didn't have the right code earlier post. Here is code I just used on my RB1100AHx2 and it works perfectly. I have two 30M connections and I get the full 60M on speedtest.net with this code. PCC Rewritten for per packet load balance with the use of nth. / ip address add addre...
by moazdabsheh
Mon May 12, 2014 2:41 am
Forum: Scripting
Topic: Script to reboot router daily.
Replies: 12
Views: 55443

Re: Script to reboot router daily.

worked very well with Router OS 5.26 :)
by moazdabsheh
Sat May 03, 2014 3:20 pm
Forum: General
Topic: PCC AND pppoe-server
Replies: 15
Views: 3974

Re: PCC AND pppoe-server

thanks Chupka for the assistance, worked very well for me :D
by moazdabsheh
Tue Apr 29, 2014 3:40 pm
Forum: General
Topic: Problem PCC Balance + PPPOE Server
Replies: 18
Views: 4612

Re: Problem PCC Balance + PPPOE Server

HI i am a beginner on mikrotik i have to connect to WAN-s gateway (192.168.0.1 & 192.168.1.1) and three LAN-s(192.168.35.1 & 192.168.45.1 &192.168.55.1) i actually have configured it simple with both gateways at IP-> routes but i have some problems during work and the main problem is for videos on ...
by moazdabsheh
Tue Apr 29, 2014 3:11 pm
Forum: General
Topic: PCC load balancing with (Hotspot + PPPoE dialer)on ether1
Replies: 7
Views: 7982

Re: PCC load balancing with (Hotspot + PPPoE dialer)on ether

what about me ? i have mikrotik configured as pppoe server with usermanager, and pcc is not working, i noticed that wan2 has no activity for pppoe users though i don't have hotspot enabled !! this is my config: /ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interf...
by moazdabsheh
Tue Apr 29, 2014 2:58 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

aboard where ?
by moazdabsheh
Mon Apr 28, 2014 4:38 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

i did checked the link weeks ago. while some Egyptians showed that speed merge can be achieved but they are using hotspot for authentication. i noticed when i go to (IP - Firewall - Connections) that only pppoe users don't have connection mark (either wan1_mark or wan2_mark) while manually static ip...
by moazdabsheh
Mon Apr 28, 2014 3:54 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

Syed said he would help when he get some free time.
anyway, have you try bonding interfaces ?
does it merge both interfaces speed into one and make it look like one line with both speeds ?
by moazdabsheh
Sun Apr 27, 2014 2:16 am
Forum: Beginner Basics
Topic: difference b/w NTH and PCC load balancing
Replies: 15
Views: 9114

Re: difference b/w NTH and PCC load balancing

what about UserManager ?
will this PCC work well with UserManager?
I used it but the problem all traffic are going through WAN1 only !!!
by moazdabsheh
Fri Apr 25, 2014 9:46 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

Try adding Nth 2/1 and Nth 2/2 to these two mangle rules you have. add chain=prerouting dst-address-type=!local in-interface=local per-connection-classifier=both-addresses-and-ports:2/0 Nth 2/1 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes add chain=prerouting dst-address-typ...
by moazdabsheh
Thu Apr 24, 2014 5:56 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

no i'm not proxy on mikrotik, but i will later after i accomplish the PCC method to achieve 2 wan lines bonding, though all traffic goes through wan1 and wan2 is always on low traffic. the ip address config was a typing mistake at the forum, check my print in the following post to see my settings., ...
by moazdabsheh
Thu Apr 24, 2014 5:40 pm
Forum: Beginner Basics
Topic: Redierect hotspot expired users to an information page
Replies: 9
Views: 4429

Re: Redierect hotspot expired users to an information page

it works well but i noticed something like a bug. https connection aren't blocked or redirected, such as facebook and google. anyone who have faced this issue or have a solution ? You can simply create a Filter Rule to block the https port 443 for the expired users ip pool to ensure misuse. enlight...
by moazdabsheh
Wed Apr 23, 2014 6:15 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

Switch wan1 off and check if wan2 works.
yes it works.
i'm using user manager to authenticate users.
by moazdabsheh
Wed Apr 23, 2014 6:08 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

these are my settings: /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 ;;; static ip clients 192.168.0.1/24 192.168.0.0 local 1 10.0.0.100/24 10.0.0.0 WAN1 2 5.5.5.200/24 5.5.5.0 WAN2 3 D 192.168.0.1/32 10.10.10.199 <pppoe-ah5> 4 D 192.168.0.1/32 10.10.1...
by moazdabsheh
Wed Apr 23, 2014 5:40 pm
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

Re: 2 wan pcc problem

Are you sure that network and broadcast addresses correspond to address of wan2? Yes, this is the ip addresses /ip address> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 ;;; static ip clients 192.168.0.1/24 192.168.0.0 local 1 10.0.0.100/24 10.0.0.0 WAN1 2 5.5.5....
by moazdabsheh
Wed Apr 23, 2014 1:54 am
Forum: Beginner Basics
Topic: 2 wan pcc problem
Replies: 23
Views: 4874

2 wan pcc problem

i applied this scenario on mikrotik v 5.26 on x86 machine /ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=local add address=10.10.10.0/24 network=192.168.0.0 broadcast=10.10.10.255 interface=local add address=10.0.0.100/24 network=192.168.1.0 broadcast=10...
by moazdabsheh
Fri Apr 11, 2014 12:09 am
Forum: Beginner Basics
Topic: Redierect hotspot expired users to an information page
Replies: 9
Views: 4429

Re: Redierect hotspot expired users to an information page

it works well but i noticed something like a bug.
https connection aren't blocked or redirected, such as facebook and google.

anyone who have faced this issue or have a solution ?
by moazdabsheh
Mon Apr 07, 2014 4:11 pm
Forum: Beginner Basics
Topic: It's good to block ping........
Replies: 14
Views: 19423

Re: It's good to block ping........

what about blocking trace route ??
by moazdabsheh
Sun Apr 06, 2014 9:54 pm
Forum: Beginner Basics
Topic: It's good to block ping........
Replies: 14
Views: 19423

Re: It's good to block ping........

what about blocking only the trace ?? is it possible ?
by moazdabsheh
Sun Apr 06, 2014 9:43 pm
Forum: General
Topic: How to block traceroute and allow ping?
Replies: 6
Views: 12071

Re:

An even more elegant solution: change the TTL to a constant value.
please guide me how to do that.
by moazdabsheh
Sun Apr 06, 2014 9:31 pm
Forum: General
Topic: Block trace of own interface ip
Replies: 5
Views: 2525

Re: Block trace of own interface ip

what about blocking the trace only while keeping icmp unblocked ?
by moazdabsheh
Sun Apr 06, 2014 9:28 pm
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

Re: netwatch beep loop

yes it can ping 8.8.8.8
i take off the wan cable so netwatch will go down and run the down script (beep)
but when i put it back, netwatch change status to up and the beep wont stop, even though netwatch says up
by moazdabsheh
Sun Apr 06, 2014 2:23 pm
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

Re: netwatch beep loop

routerboard x86
router os 5.26
by moazdabsheh
Sat Apr 05, 2014 5:14 pm
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

Re: netwatch beep loop

this is the export /tool netwatch add disabled=yes down-script=":global soundAlarm1 value=[:tobool true];\r\ \n:while (\$soundAlarm1) do={\r\ \n:beep frequency=2000 length=500ms;\r\ \n:delay delay-time=1000ms;\r\ \n:beep frequency=4000 length=500ms;\r\ \n:delay delay-time=1000ms;\r\ \n}" host=8.8.8....
by moazdabsheh
Sat Apr 05, 2014 2:46 pm
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

Re: netwatch beep loop

i did exactly as your example, same issue, when it beeps it never stops, the test is set to 15 seconds, when down happens it starts beeping after 15 seconds then if it goes up it never stops beeping !!

something is missing in your script, maybe the up script.
by moazdabsheh
Fri Apr 04, 2014 11:55 pm
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

Re: netwatch beep loop

what do you mean by variable ?
can't you give me something easy to copy and paste ?
i have only one netwatch trigger to test ping on 8.8.8.8
by moazdabsheh
Fri Apr 04, 2014 7:58 pm
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

Re: netwatch beep loop

i just copied and pasted from your first post to up and down events.

but i noticed in your second post there is a number 1 in it which wasn't in your first post.
i will test it later when i'm on the mikrotik.
by moazdabsheh
Fri Apr 04, 2014 3:12 am
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

well i'm aiming at fooling unskilled windows users who thinks linux is another brand of computers such as macbook :lol:

what about route filters over here? someone told me they can do it over cisco routers.
by moazdabsheh
Fri Apr 04, 2014 3:06 am
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

Re: netwatch beep loop

i did what you gave me rextended but when up the beep wont stop !!.
how to make the beep stop when it's up ?
by moazdabsheh
Thu Apr 03, 2014 1:42 am
Forum: Beginner Basics
Topic: netwatch beep loop
Replies: 16
Views: 7520

netwatch beep loop

i want to use this script in netwatch when a host is down to beep the mikrotik { :local count :local freq :for c from=1 to=50 step=1 \ do={ \ :set count 15 :set freq 1900 :do {\ :beep length=400ms frequency=$freq; :delay 25ms :set count ($count - 1); :set freq ($freq +35) } \ while (($count <16) && ...
by moazdabsheh
Thu Apr 03, 2014 1:29 am
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

what about tracing, the tracert command how to make it go through specific wan interface ?
by moazdabsheh
Mon Mar 31, 2014 4:25 pm
Forum: General
Topic: VPN over L2TP/IPSEC
Replies: 23
Views: 4295

Re: VPN over L2TP/IPSEC

is using L2TP better than PPTP for VPN connections ?
by moazdabsheh
Sun Mar 30, 2014 6:10 pm
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

i don't have a domain and i don't think my ISP will agree.
that's why i was looking for a solution around.
by moazdabsheh
Sun Mar 30, 2014 5:16 pm
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

business secrets i don't want to share with the customers.
do i have to buy a subnet of real ip addresses in order to make this work or this is a method anyone can help with ?
by moazdabsheh
Sun Mar 30, 2014 5:04 pm
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

this the scenario i have in mind. i have 2 ISP WAN 1 = 8 Mbps DSL WAN 2 = 30 Mbps PPOE i'm trying to use both on 1 mikrotik device, but i don't want customers to find out what's WAN 2 isp when they go to http://www.speedtest.net any ideas or suggestions ? So let me see if I have this correct. You w...
by moazdabsheh
Sat Mar 29, 2014 1:54 pm
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

how about forwarding some websites through a specific WAN interface i define, such as http://www.speedtest.net ?? The way are: know what are the pool of address used by speedtest.net add each pool on addtess-list called list-speedtest on mangle use mark route on prerouting, mark route as "speedtest...
by moazdabsheh
Sat Mar 29, 2014 1:20 am
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

how about forwarding some websites through a specific WAN interface i define, such as www.speedtest.net ??
by moazdabsheh
Thu Mar 27, 2014 1:36 am
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

i changed the ip address, after pptp client connect i can ping 192.168.4.1 but i can't ping the others on the same subnet !!!
what would be wrong now ?!
by moazdabsheh
Wed Mar 26, 2014 5:57 pm
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

any other ideas included in Mikrotik since it looks like a complete system ?
by moazdabsheh
Wed Mar 26, 2014 5:41 pm
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

Re: dual wan challenge

so what do to ?

how can i use my DSL wan to be as the only ip showing for customers while using both WAN's bandwidth ?
by moazdabsheh
Wed Mar 26, 2014 3:42 pm
Forum: Beginner Basics
Topic: dual wan challenge
Replies: 25
Views: 5388

dual wan challenge

this the scenario i have in mind.

i have 2 ISP
WAN 1 = 8 Mbps DSL
WAN 2 = 30 Mbps PPOE

i'm trying to use both on 1 mikrotik device, but i don't want customers to find out what's WAN 2 isp when they go to www.speedtest.net

any ideas or suggestions ?
by moazdabsheh
Wed Mar 26, 2014 3:09 pm
Forum: Beginner Basics
Topic: Redierect hotspot expired users to an information page
Replies: 9
Views: 4429

Re: Redierect hotspot expired users to an information page

Thank you I got it working!!! ;)
aren't you suppose to share your solution with the rest of the forum members so everyone would benefit ?!
by moazdabsheh
Tue Mar 25, 2014 5:28 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

i will change my home router dhcp and gateway settings to 172.20.7.x/24 when i get home and give it a try.
by moazdabsheh
Tue Mar 25, 2014 3:59 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

at home i have linksys wrt54g router.
at work we use d-link dsl router.

the mikrotik router is on a network not related to these networks, that's my whole point of vpn, to be able to access the devices connected to the mikrotik while i'm home or at the office.
by moazdabsheh
Tue Mar 25, 2014 3:37 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

when you say (localnet) you mean the network i'm connected to other than mikrotik's network, right ?
by moazdabsheh
Tue Mar 25, 2014 11:42 am
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

yes.

at the office i'm on 192.168.1.x/24
and at home i'm on 192.168.5.x/16

what do you suggest? change something ip address?
by moazdabsheh
Mon Mar 24, 2014 10:12 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

Sometimes i'm in the office which is another city, and sometimes i'm home. Thats why i need to access 192.168.4.x devices on the mikrotik's lan to view it's performance remotly as i'm there. 192.168.4.x for wireless access points and pptp clients. 192.168.0.x for static arp clients 10.10.10.x for pp...
by moazdabsheh
Mon Mar 24, 2014 5:11 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

no i didn't know.
that's my point of vpn.

what's the solution in this scenario ?
how do I access the 192.168.x.x devices that are connected to LAN 1 interface ?!

I'm trying to access these devices while i'm not on that mikrotik's network.
by moazdabsheh
Mon Mar 24, 2014 4:39 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

yes, here is mine:
by moazdabsheh
Mon Mar 24, 2014 3:49 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

i just did that and test it and the result is the same, no ping at Ubiqutie access points or even the mikrotik itself.
i noticed that i get subnet for my vpn connection /32 such as 255.255.255.255 !!!
by moazdabsheh
Mon Mar 24, 2014 2:42 pm
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

Re: pptp vpn issue

the vpn client, whenever i connect to pptp from outside the network i can't access the devices nor ping it, but when i'm connected to the LAN i can easily even without pptp connection.
by moazdabsheh
Mon Mar 24, 2014 3:40 am
Forum: Beginner Basics
Topic: pptp vpn issue
Replies: 22
Views: 4780

pptp vpn issue

i have mikrotik 5.26 on x86 i'm using user manager for pppoe authentication and static ip addressing for some clients with reply-only for arp on lan card. i'm trying to access wireless devices on the lan to that mikrotik throug h pptp, pptp connection established but i can't ping nor access the wire...