MikroTik

Kampfwurst

what do you mean with bad news?

Kampfwurst

Hi,

We have the CCR2004-16G-2S+ with the new ROS 7.2.1 running and we get some packet loss.
Does the packet loss problem still exist with the CCR2004?

If we ping devices behind the router we lose between 2 and 5% of the pings.

Kampfwurst

the Chateau 12 is nealy unusable with ROS6. I would also like to install ROS6 on it. The time between the releases from ROS 7 is to long.

Kampfwurst

i would like to mark the TCP Port 1723 and the GRE. Then i would like to route this pakets

Kampfwurst

Hi,

I have a a network where i cant open pptp connections. Now i would like to route this traffic over the LTE modul from my RBD53G. All the other traffic should go out over the default gateway
The problem is that i have not routing mark option in ROS7

Kampfwurst

I just received a RB4011iGS+RM ... the extra sticker on the package said "RB4011iGS+RM - new" and under System - Routerboard, the dialoge states "Revision: r2". Shipped with Firmware revision "6.45.9 stable" ...will monitor closely and report how this thing will perfor...

Kampfwurst

Kampfwurst

i tested at the moment with 2 RB1100ahx4 the Version 6.45.9 and i disabled the sntp and enable it once a day for 90sec for sync. since 10 days no problem with the RB1100ahx4 i got the same answer from the support. I should RAM the device. The best for the support team would be a bot to send automati...

Kampfwurst

some of my RB1100AHx4 running a L2TP server with IPsec. I have now disabled the SNTP. Maybe it helps. Now running the 6.45.9. Its for me unbelivible why mikrotik brings out a long term version "version is the most stable release without new features, just most important fixes." and this ve...

Kampfwurst

i have 3 RB1100Ahx4.

All 3 have problems. One had a load of 50% (2 Cores stuck at 100%).
One has a winbox lockout. Only reboot helped.
One is restarting every 4-5 days.

mikrotik should stop to produce new devices. They should get the software fixed

Kampfwurst

any news about the NAND writes? Is there a fix?

Kampfwurst

On all off my routers is also the ntp client running without problems

Kampfwurst

We have some RB4011 running but never any problem. They are also running with the NTP Server. At the moment 96 days uptime.

Kampfwurst

I have v6.45.7 running without problems. Could you guys try the following: Connect to wifi with a smartphone and run speedtest using the app While speedtest is running, attempt writing to unit flash (eg: by running a backup) Using this 2 simple steps I can crash it pretty much on demand with any ROS...

Kampfwurst

i think that the winbox version is to new. Try an older one

Kampfwurst

is it possible to install a older NTP package on the new version?

Kampfwurst

switching and routing a totaly different. When you need routing the CRS326 can handle in worst case only 33Mbit.

https://mikrotik.com/product/CRS326-24G ... estresults

Kampfwurst

For the towers we need a small router(no switch) with 4 SFP+ ports and 8 gigabit POE ports

1+

Kampfwurst

if it helps to fine the bug.
On my hAP ac2 is version 6.45.7 with NTP since 69 days running without reboot.
I have also 3 IPSec connections running

Kampfwurst

i have only devices with ROS next to me. I would like to use my old RB750G

Kampfwurst

Hi, I have the folowing "problem". I got a new modem from my internet provider. Now i can get on every port on this modem a offical ipv4 address. The problem is that the modem is not next to my main router and i have only one cable to the main router. Now i would like to set a small Mikrot...

Kampfwurst

I think it has something to do with the cpu frequenz. I have two hAP ac2. One had the problem with the reboots. On this one i was playing arround with the cpu frequenz. I changed the power supply, installed it new with netinstall... At the end I set up a new config with only ip and then i connected ...

Kampfwurst

I have no fasttrack rule in the firewall. [admin@Core_Router] /ip settings> print ip-forward: yes send-redirects: yes accept-source-route: no accept-redirects: no secure-redirects: yes rp-filter: no tcp-syncookies: no max-neighbor-entries: 8192 arp-timeout: 30s icmp-rate-limit: 10 icmp-rate-mask: 0x...

Kampfwurst

i had a similar problem some time ago at work. The ping was fine but webpages and other staff was not working. there was a wrong reverse route the problem.

Kampfwurst

i can ping also google.com or any other webpage so the name resolution is working.

It seems that a route is not working. Mybe I need a "reverse route" somehow

I disable all the other mangle routes. without succes

Kampfwurst

What i see is that the packet does not leave the router through your VPN as it should be... So you dont even reach the remote router... this is not right. This is the normal tracert 1 <1 ms <1 ms 1 ms 10.10.10.254 2 * * * Zeitüberschreitung der Anforderung. 3 11 ms 12 ms 8 ms 80-XXX-XX-XX.static.up...

Kampfwurst

Hi, so this is the tracert of 8.8.8.8 1 <1 ms 1 ms <1 ms 10.10.10.254 2 * * * Zeitüberschreitung der Anforderung. 3 151 ms 39 ms 37 ms vlan139.as08.fra4.de.m247.com [192.145.125.81] 4 49 ms 49 ms 38 ms vlan2910.agg1.fra4.de.m247.com [77.243.185.198] 5 38 ms 64 ms 39 ms 37.120.128.148 6 49 ms 41 ms 4...

Kampfwurst

Sorry this are my settings. I hope this helps finding the error ;-) [admin@Core_Router] /ip firewall mangle> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=forward action=change-mss new-mss=clamp-to-pmtu passthrough=yes tcp-flags=syn protocol=tcp out-interface=all-ppp tcp-mss=1301-65535...

Kampfwurst

The application it's not yet released we're on beta testing. Send me one private message and I will send you a link to the beta.

can you post the link for the Programm. I cant send you a PM. I think its disabled by in the board

Kampfwurst

Sorry i have enabled the route when I was testing. Its disable because i was exporting it.

Kampfwurst

Hi, I have the following question. I would like to route the internet traffic from one ip in my network over the vpn. The router has the the IP 10.10.10.254. The PC whitch I would like to route over the VPN has the IP 10.10.10.150. I have the following roules in my firewall. /ip firewall mangle chai...

Kampfwurst

Hi,

What are the optimum settings for L2TP with IPsec for the MTU and MRU?
I have set it on my Server to 1400.
In the firewall i have set a rule with change MSS to 1370.

Maybe someone has the correct settings.

merry christmas Chris

Kampfwurst

I had the same.
viewtopic.php?f=3&t=153252&p=759046#p759046

I replaced it and for now it runns stable, (since over one week)

maybe there are some faulty prozessors in the hAP ac2.

Kampfwurst

i get the error in the log: router was rebooted without proper shutdown

Kampfwurst

The heat should not be a problem. Its in the storeroom. There is a temperature around 14 Degree.

Kampfwurst

different power supply and still the same

There is also no Supout File after crashing

Kampfwurst

Hi,

I have 2 old cAP 2nD with problems with the ethernet port. The PoE is working but i get no link.
On the board i cant see anything.

A reset does not help.

Chris

Kampfwurst

same problem

[admin@Core_Router] > system watchdog print
watch-address: 9.9.9.9
watchdog-timer: yes
ping-start-after-boot: 5m
ping-timeout: 4m
automatic-supout: yes
auto-send-supout: no

i never get any supout file

Kampfwurst

Hi, My core router at home the hAP ac2 crashes nearly every week. Sometime the hAP reboots automaticaliy sometime he stopped working. I thought that the router reboots automatically via the watchdog, if he is not responding for some time. Im using the newest version 6.45.6. I thappens also with the ...

Kampfwurst

Hi, I have one question. This are my settings for the IPsec Server. /ip ipsec mode-config set [ find default=yes ] name=request-only responder=no /ip ipsec policy group set [ find default=yes ] name=default /ip ipsec profile set [ find default=yes ] dh-group=modp2048,modp1024 dpd-interval=2m \ dpd-m...

Kampfwurst

when will the R11e-LoRa8 and the wAP LoRa8 available ?

Kampfwurst

LtAP mini
https://mikrotik.com/product/ltap_mini_lte_kit

Kampfwurst

Did it work? I need the same

Kampfwurst

i use a HAP ac² and i crashes when i try to use the bandwitdh test. I tried to connect to a 1100X4 also with the 6.44.5 version. The log it shows "kernel failure" Has someone the same problem? The mikrotik support wrote me to update to the 6.45.3. But this is no option. Mikrotik need to ge...

Kampfwurst

We need a release date for the lora?

Kampfwurst

i would buy one

Kampfwurst

Ok so i tried to set up L2TP with IPsec I looks not so bad. I get my other router connectet over the "L2TP Client" under Interfaces. Under encoding is writen "cbc(aes) + hmac(sha1)" is this correct? On my main side i use the hAP ac² with the IPsec hardware acceleration. The other...

Kampfwurst

because i never had luck with the L2TP/IPsec with the mikrotik. In my mind its to complicated and with every new version something is not working. With the pptp i never had this problems.

Kampfwurst

HI, I would like to detect the PPTP attacks from Bots and put them to a black list. I tried it with the following rules. 6 ;;; detect PPTP attack chain=input action=add-src-to-address-list connection-state=new connection-limit=4,32 protocol=tcp src-address-list=!black_list address-list=black_list ad...

Kampfwurst

After upgrading to 6.45.2 the pptp connection to the core router with 6.44.1 is not possible, It stops at link established. Downgroade to 6.44.5 and it works again.

Kampfwurst

im also waiting. it is sad that it was in the last newsletter but still no date for release

Kampfwurst

What i forget to write is that i use a CAPs Manager on the hap ac2. I have two hap ac2 running. one of them is the CAPs Manager- Both oft them running without problems. As i wrote before. On my hap ac2 with the caps manager and without local forward on the wifi its running fine. Maybe this helps so...

Kampfwurst

Hi, I got the following error when i tried to connecto to a ubnt Access Point. (Nano Bridge)

I cant find anything about this error. Maybe some can help.

Chris

Kampfwurst

I just add the mikrotik ddns to "dns records" in dynu. No scripting necessary.

can you explain it?

Kampfwurst

is the 5Ghz Wifi on the R11E Card? or is it on the main board?

Kampfwurst

What i forget to write is that i use a CAPs Manager on the hap ac2. I have two hap ac2 running. one of them is the CAPs Manager- Both oft them running without problems.

Kampfwurst

with the 6.45beta62 on my hap ac2 i have no problem with the 5ghz. After 1 week the Wifi is still running, Maybe some can confirm this with the RB4011

Kampfwurst

I have still the same problem. Version 6.44.3

Kampfwurst

any news about the relaese date?

Kampfwurst

please send all your Supout.rif files to the mikrotik support. maybe the find the problem

Kampfwurst

Hi, We had today some strange behaviour on our router. The Router is RB1100AH with version 6.42.x As you can see on the screenshot we got a TCP connection from 60.191.52.254 He locked one of the server with a crypto locker. Is this a bug in the routeros? Has he hacket the pptp connections? https://s...

Kampfwurst

no errors in the log.
I have checked the Internet but when I use IP/ Cloud/ and Force Update nothing happend. Also if i trie to upload a backup file to the cloud. Then i get connectin error in the terminal.

Kampfwurst

On my CRS106-1C-5S the cloud is not workig anymore with the Version 6.44.

Kampfwurst

+1 from my side

Kampfwurst

+1 TACACS

Kampfwurst

It sounds like a memory leak for me.

@ Rrock which version are you using?

Kampfwurst

I hade today the same problem with the RB1100AHx4. ROS 6.43.7.

Are there any new information

Kampfwurst

Im also looking for an new firewall "scipt" for my new mikrotik home router. Is the gregsowell script "useable" or has someone better firewall settings?

Kampfwurst

Hi, I have a Headquarter with a RB1100X4. My customer has about 20 LtAP minis with are connectet over PPTP to the Headquarter. I would like to use the RIP V2 as routing protocoll. But i have problems to get the RIP running over PPTP. If I use RIP the PPTP tunnels is every 30sec reconnecting. has...

Kampfwurst

same problem with the RB1100x4

Kampfwurst

Hi,

Is it possible to check with a script or over snmp the status of the powersupplys?
the oid:.1.3.6.1.4.1.14988.1.1.3.15 is not working.

Thanks,

Kampfwurst

has someone an example. I cant get it working

Kampfwurst

I tired to mark the connections. No success. ;-(( I also tried the simple queues but there i have problems with the priority I would like to splitt my 50Mbit Internet to the different departments in the company. I also would like to set the priority to different departments if the internet line is f...

Kampfwurst

has anybody a queue tree with NAT running?

Kampfwurst

when the traffic is routed the queues tree is working. but not with NAT

Kampfwurst

packet mark is on the bound on the interface.

Kampfwurst

yes fasttrack is disabled
https://imgur.com/zkk7pO4

Kampfwurst

with mangle rules, use chain=forward it is not working.
If i change it to chain=forward also the download Queues are not working anymore.

The paket mark with the mangle roules is working
https://imgur.com/1RVYOgL

Kampfwurst

Hi, Im tried to build a queue tree for the up and download. The queue tree works only for the download. The upload is not shaped. I think its maybe a problem with the NAT. Maybe someone can help me with this problem ;-) Thanks Chris /queue tree add max-limit=50M name=wan_gesamt_down packet-mark=wan_...

Kampfwurst

i have the same problem

Kampfwurst

Hi,

Im using a Capsmanager with around 40 accesspoints. Now I would like to set on the accesspoints the interfaces in the way, that the use only CH1,CH6 or CH11.
Is this possible with the Capsmanager?

Thanks Chris

Kampfwurst

Hi,

I have 2 Netmetals with the same damage. It burns alway Q1 as you can see on the foto.
What is Q1? I think its the DC converter.

Thanks Chris

Kampfwurst

Same from my side.

Kampfwurst

Same question

Kampfwurst

Hi I have a small problem with my MT and I think that someone can fix my problem. Is it possible to save multi ssids and WAP2 keys so that the Mikrotik automatically connects to a available Wireless Network like a Windows PC? I have a device whitch is moving between different Wireless Network with d...

Kampfwurst

Have a quick question We have at home a 12Mbit Internet Connection but if my brother is watching youtube or downloading something the ping is getting very high and its not possible to play online games. How can I priority for example for youtube and downloading lower as the online game. I tried it b...

Kampfwurst

has anyone a working script for dyndns.org?

Kampfwurst

it should be in the same price margin then the RB951G-2HnD

Kampfwurst

Is this the best option then? How comes Mikrotik does not have a really well fitting case where one can also use the SFPs properly yet?

Looking also forward

Kampfwurst

great

Kampfwurst

today I got my 750GL and a 951G-2HnD ;-) I still have problem to build 2 Vlan. One Vlan (VLAN 200) must be routet for the Internet and on the other Vlan (VLAN 100) I need full wirespeed. There is my config 750GL PORT 3 as Trunk /interface vlan add name=VLAN100 vlan-id=100 interface=ether1 disabled=n...

Kampfwurst

thanks for your help.

I hope that a Vlan trunk will work on the switch chip on the final ROS 6.13.

I need full wirespeed to the File Server ,-)

Kampfwurst

Kampfwurst

I have some Question about Routing and Vlan. There is my Network at Home. ;-) I need to build a trunk between the RB750GL and the CRS125. But I need full wirespeed on the VLAN 100 because of my Fileserver on the ESXi. The Firewall (VLAN 200) need to be routet on the CRS125.(about 30Mbit) This can go...

Kampfwurst

the the DHCP Server gets invalid

[admin@MikroTik] /ip dhcp-server> print
Flags: X - disabled, I - invalid
# NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP
0 I dhcp1 ether1 dhcp_pool1 3d

Kampfwurst

My DHCP Server

Kampfwurst

dhcp-relay [admin@MikroTik] > ip dhcp-relay print Flags: X - disabled, I - invalid # NAME INTERFACE DHCP-SERVER LOCAL-ADDRESS 0 relay1 ether1 192.168.10.1 192.168.10.1 and the DHCP Server [admin@MikroTik] /ip dhcp-server> print Flags: X - disabled, I - invalid # NAME INTERFACE RELAY ADDRESS-POOL LEA...

Kampfwurst

Hello I have one question. I have one RB750G-2HnD. I tried to use the Switch all Ports and activate the DHCP Server. But without success. I set all ether1 as master. [admin@MikroTik] >> interface ethernet print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP MASTER-PORT SWITCH...

Kampfwurst

Thanks for the fast response. This sound great.

Is it possible to post the "Performance test results" from the CRS?

Kampfwurst

Hello

Whats the speed of the backplane of the CRS125 Cloud Router Switch. Has he the full 48Gbit?

Kampfwurst

ok

I cant find the switch chip in the mikrotik wiki
http://wiki.mikrotik.com/wiki/Manual:Sw ... p_Features

Kampfwurst

this is my config

Kampfwurst

Hi

I have at home the RB751G-2HnD. I tried to use WPA2 EAP with the "onboard" Radius Server. Without success.
In the Internet I found several post where is written that the onboard Radius Server can't be used for WAP2 EAP
Is this true?

RouterOS 6.10

Christoph

Kampfwurst

Can anyone confirm if this does inter-VLAN routing on the switch chip at wire speed? It's supposed to do some I believe. But right now there are some bugs with 6.11 that limit the feature set. These are supposed to be getting fixed in 6.12 when it comes out. This sounds quite bad ;-) So I will just...

Kampfwurst

Can anyone confirm if this does inter-VLAN routing on the switch chip at wire speed?

Kampfwurst

I would need the CRS not the CCR. I would like to use L3 thinks lile Vlan ... I also would like to create a TestLab with Vlan routing. I would prefer wire speed

Kampfwurst

Hello Im a greenhorn in Miktrotik stuff.;-) I would like to use the CRS125-24G-1S-2HnD-IN for my Home Office. I need round about 16 Ports for LAN. The other Ports I need for Vlans (Voip....) and Hotspot staff. I would also like to use NIC bonding. Is this possible? Im not sure if the CRS125-24G-1S-2...

Search found 107 matches