Community discussions

MUM Europe 2020

Search found 24 matches

by qwertysqwerty
Sat Jun 13, 2015 12:11 am
Forum: General
Topic: RB2011UiAS-2HnD-IN PoE IP Camera
Replies: 1
Views: 640

RB2011UiAS-2HnD-IN PoE IP Camera

I see in the datasheet that the PoE output capability is described as:

"Power output 500mA on Port 10"

This is passive, yes? What options do I have if I wanted to power a 802.3af compliant network camera from this?
by qwertysqwerty
Wed Nov 19, 2014 12:44 am
Forum: General
Topic: Correct Firewall Rule for DNS
Replies: 4
Views: 6390

Correct Firewall Rule for DNS

Hello, as the title suggests I'm looking for the correct firewall rules to allow the router to perform DNS requests on behalf of the LAN. So basically, all systems on my LAN use the default gateway (my router) for DNS lookup. Currently I have UDP port 53 allowed from LAN address list on INPUT and OU...
by qwertysqwerty
Mon Nov 03, 2014 7:31 pm
Forum: Beginner Basics
Topic: Two default routes - DAC, DS.
Replies: 6
Views: 4076

Re: Two default routes - DAC, DS.

Blue lines are inactive so they have no influence on routing decision. Only active routes do. Ah I see. Good. You do not need a DCHP client address from your modem... I assume it is only needed for maintenance tasks on the modem. Yes, I do need it. For firmware updates, etc. It is useful to have th...
by qwertysqwerty
Sun Nov 02, 2014 9:00 pm
Forum: Beginner Basics
Topic: Two default routes - DAC, DS.
Replies: 6
Views: 4076

Two default routes - DAC, DS.

I have an error in my routing table. Let me explain my home set-up: I use an ADSL/ADSL2+ modem. This modem is connected to ether1-gateway port of my [http://routerboard.com/]RB2011UiAS-2HnD-IN router. My RB2011UiAS-2HnD-IN obtains a LAN IP from the DHCP server configured on the modem (192.168.2.0/24...
by qwertysqwerty
Sun Jul 06, 2014 9:56 pm
Forum: Beginner Basics
Topic: Noob issues, probably...
Replies: 5
Views: 1277

Re: Noob issues, probably...

Grazie. This fixed things. One more question: I have a route for anything going to 192.168.2.0/24 to exit via ether1-gateway which is where my Draytek is. But I cannot reach the Draytek from my LAN. Why? # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 ADS 0.0.0.0/0 [WAN_IP] 1 1 ADC [ISP_WAN_NW] [WAN_IP] p...
by qwertysqwerty
Sat Jul 05, 2014 4:52 pm
Forum: Beginner Basics
Topic: Noob issues, probably...
Replies: 5
Views: 1277

Re: Noob issues, probably...

2) remove all not dynamic route, all address and dhcp client assigned to ether1 (adsl modem on bridge mode do not need both) So in short you mean remove the DHCP client from ether1, and set statically? Why would this be a fix? The V120 has a DHCP server auto-configured. It seems to me that the V120...
by qwertysqwerty
Fri Jul 04, 2014 11:36 pm
Forum: Beginner Basics
Topic: Noob issues, probably...
Replies: 5
Views: 1277

Noob issues, probably...

Today I received a Draytek Vigor V120 ADSL/ADSL2+ modem to use together with my RB2011UiAS-2HnD-IN. As I am sure many of you already know all I have to do is set up a PPPoE client on the RB2011. However I am experiencing some issues: Which interface do I set the NAT masquerade rule, ether1-gateway o...
by qwertysqwerty
Fri Jul 04, 2014 8:00 pm
Forum: General
Topic: IPTV IGMP - YouView Box (UK)
Replies: 6
Views: 2150

Re: IPTV IGMP - YouView Box (UK)

I have no experience with that IPTV provider, but also IGMP Proxy should work ok and would be more dynamic than static switch rules, i.e. if you move your STB to different ports. Oh, well, you might never move it! This comment doesn't add any value, but I'll be happy to review your edit should you ...
by qwertysqwerty
Thu Jul 03, 2014 6:26 pm
Forum: General
Topic: IPTV IGMP - YouView Box (UK)
Replies: 6
Views: 2150

Re: IPTV IGMP - YouView Box (UK)

I... used switch rules to forward anything coming from STB port to ISP port, and to direct returning traffic back into the STB port. I'm using the RB2011UiAS-2HnD-IN. I do currently use the switch chip for four of the Ethernet ports. I could modify the config indeed. Could you explain your set up a...
by qwertysqwerty
Wed Jul 02, 2014 6:21 pm
Forum: General
Topic: IPTV IGMP - YouView Box (UK)
Replies: 6
Views: 2150

Re: IPTV IGMP - YouView Box (UK)

I see. Thanks for sharing!
by qwertysqwerty
Tue Jul 01, 2014 7:38 pm
Forum: General
Topic: IPTV IGMP - YouView Box (UK)
Replies: 6
Views: 2150

IPTV IGMP - YouView Box (UK)

Does anybody on here use the YouView IPTV set-top box here in the UK? I'm having some difficulties setting up IGMP and would like to discuss your progress/experience in setting it up. The closest resource I have found on the net, but it is not detailed enough of a guide is here: https://community.bt...
by qwertysqwerty
Sun Jun 29, 2014 7:17 pm
Forum: General
Topic: New Packet flow diagram
Replies: 103
Views: 73108

Re: New Packet flow diagram

Excellent work. Very useful indeed!

Thank you.
by qwertysqwerty
Sun Jun 29, 2014 7:04 pm
Forum: General
Topic: RouterBOOT 3.16 Changelog?
Replies: 1
Views: 815

RouterBOOT 3.16 Changelog?

Does anybody have the changelog please? The wiki needs to catch up...

Thanks.

(http://wiki.mikrotik.com/wiki/RouterBOOT_changelog)
by qwertysqwerty
Tue Jun 10, 2014 10:24 pm
Forum: Beginner Basics
Topic: Script and Syslog on Tx/Rx.
Replies: 8
Views: 1400

Re: Script and Syslog on Tx/Rx.

Thanks for the info.
by qwertysqwerty
Mon Jun 09, 2014 3:49 am
Forum: Beginner Basics
Topic: Script and Syslog on Tx/Rx.
Replies: 8
Views: 1400

Re: Script and Syslog on Tx/Rx.

Hello? 75 views and nobody can point a noob in the right direction on how to copy the traffic?...

I do however have my Syslog messages reporting the times and WAN IP the device is communicating with, which is progress.
by qwertysqwerty
Sun Jun 08, 2014 5:47 am
Forum: Beginner Basics
Topic: Script and Syslog on Tx/Rx.
Replies: 8
Views: 1400

Re: Script and Syslog on Tx/Rx.

You can add firewall rule with logging action in case of data transfer according to your criteria. If you want to be sure, switch it really off. I'm going to give this a go. But how can I take a copy of the traffic? Where do you see the phantom communication? Remember that not all devices are reall...
by qwertysqwerty
Sun Jun 08, 2014 2:24 am
Forum: Beginner Basics
Topic: Script and Syslog on Tx/Rx.
Replies: 8
Views: 1400

Re: Script and Syslog on Tx/Rx.

Am I doing something wrong?

12 people have viewed this and still no response?...
by qwertysqwerty
Sun Jun 08, 2014 1:27 am
Forum: Beginner Basics
Topic: Script and Syslog on Tx/Rx.
Replies: 8
Views: 1400

Script and Syslog on Tx/Rx.

What is the best way to trigger a message to my Syslog-ng server on my LAN when an interface is Tx/Rx data? I have a device on my LAN which although I turn off, still seems to be communicating and I want to know when it is doing this. Ideally I'd also like to take a copy of all the traffic passing t...
by qwertysqwerty
Thu Apr 17, 2014 7:01 pm
Forum: Beginner Basics
Topic: Info about Bridging
Replies: 7
Views: 1710

Re: Info about Bridging

Thank you for your reply.
by qwertysqwerty
Thu Apr 17, 2014 6:47 pm
Forum: Beginner Basics
Topic: Sniffer tool not working.
Replies: 4
Views: 1287

Re: Sniffer tool not working.

obviously you skipped reading "Manual:Tools/Packet Sniffer" part of Wiki too early. hardly im can explain things better than Wiki, in that point, just conclude. unconfigured and not started, yet, sniffer - will behave just like you depicted, respectively. I have no idea what you are saying. But I w...
by qwertysqwerty
Thu Apr 17, 2014 6:42 pm
Forum: Beginner Basics
Topic: Info about Bridging
Replies: 7
Views: 1710

Re: Info about Bridging

...its to reduce necessary configuration amounts/steps, at expense of security and manageability [and] to mimic notorious SOHO devices, configuration and thus - reduce culture shock of new customers... [In] short: bridging sucks. NEVER use it... I'm assuming the alternative L2 approach is to config...
by qwertysqwerty
Thu Apr 17, 2014 5:24 pm
Forum: Beginner Basics
Topic: Sniffer tool not working.
Replies: 4
Views: 1287

Re: Sniffer tool not working.

Anybody?
by qwertysqwerty
Wed Apr 16, 2014 11:12 pm
Forum: Beginner Basics
Topic: Info about Bridging
Replies: 7
Views: 1710

Info about Bridging

Hello. I have several questions. I'm not following what bridging is all about. I get that it is a L2 concept and allows the L2 connection between (often geographically separated) LANs, but I'm missing "the whole point" completely. If you want to pick and choose which questions to answer this will be...
by qwertysqwerty
Wed Apr 16, 2014 10:41 pm
Forum: Beginner Basics
Topic: Sniffer tool not working.
Replies: 4
Views: 1287

Sniffer tool not working.

Hello. I'm trying to capture and view traffic on ether2. I know there is traffic TX and RX on the Ethernet interface as I have verified this with: /interface monitor-traffic interface=ether2 rx-packets-per-second: 7 rx-drops-per-second: 0 rx-errors-per-second: 0 rx-bits-per-second: 30.8kbps tx-packe...