I would strongly suggest that you add a "Test config for x seconds" function that brings config back to where it was before applying it. It's necessary for production equipment when (we all aggree on this) some times certain configs seem to work in test benches but out in the field they to...

Hi there Normis, I would really appreciate having an save file/export ping/traceroute log function of each individual winbox ping/traceroute test. Sometimes it comes handy when doing small tests and keeping them logged. I know there are several 3rd party applications that actually do this. But havin...

http://forum.mikrotik.com/viewtopic.php?f=2&t=81311

In this post you can add the address of speedtest in an address list and then mark routing

Sent from my mobile phone with Tapatalk

this may really help! Thanks a lot!

Mark route with dst-address of speedtest server like this: /ip firewall mangle add chain=prerouting dst-address-list=speedtest action=mark-routing new-routing-mark=speedtest Add all ip address of speedtes in the address list calle speddtest Then select the gateway of your wan Sent from my mobile ph...

Hello! Let's say there's a scenario where we have two gateways balanced and everything works perfectly. Does anyone know a way to accurately mark and send all traffic made with speed tests at speedtest.net through only one of those gateways? **Including Uploads** One of those gateways is dedicated a...

I'm noticing is impossible in a real esenario work more traffic through an interface that is I show below, I want to clarify that and replaced eh SFP fiber modules which are certainly cisco

thank you very much

hi, can you tell me where I can get the v6.3rc1? appreciated, and I'm having serious problems with v6.x

error: hold timer expired, subcode=0 this happened since I have the v6.x. probe and with all I am writing to you in order to let them get that error. few days ago, I'm having problems in my ccr1036, with version 6.2. This problem causes all BGP connections frequently disconnect, making it impossible...

??? Please I need help

Hello, im running 2 servers with mt 4.10 lv4 license on 2 equal AMD Phenom II x4 955 @3.2 ghz 2gbRAM @1600mhz Regarding to nic setups i got in sv1 2 "Intel PRO/1000PT (EXPI9300PT) PCIe1x", and the onboard realtek gigabit rtl8169 on the other sv i got the onboard (same as above) and the Int...

Hmm.. Yes.. I know i can set the packet size, timeout, packet count, etc.. But.. What if i want to ping for 5 hours? To check loss over time.. If i set my timeout to 3500 ms. And a packet count of 500.. I wont be pinging for 500 seconds if i get a couple of losses.. I was sugesting sth like idk ex: ...

hello, dont you think it would be nice to have a time counter on the ping screen under winbox?

also it would be great to set the amount of time to ping


regards!

Or rebooting..

Would't it be great to have a blackberry winbox client?


Let's think about it and comment.


Thanks in advance.

It would be great having an internal note system, in which you can write down modifications done to the equipment. Specially if you aren't the only one person working on that device. Supporting pop-ups. Message System. Logging. Saving Messages and/or popups. (executing them once or every time you lo...

I please beg u to tell me what the adapter´s codename, brand, name is!!

i have the same issue on all my adapters, including rb11, pcengines adapter MPCI.1B and some embedded adapters from another boards.

Thanks in advance

thank you a lot man.. at last i can understand it well!!

tnx again, c ya

eugene, thanks for your advice about the manual.. ive read it before asking, its just that i dont understand it. and normis, thanks for the link to my own post.. where i was asking something about nth.. the only thing i want, and i think most of mt users want, is a little bit more complete explanati...

can anyone with the right experience please write a basic wiki to explain nth feature??

itll be very helpful for all

tnx you all

thnx man.. thank you a lot, you saved my job

I need to know what´s the nth for a loadbalancing of 8 lines

for 2 is 1,1,0 1st
1,1,1 2nd

for 3 is 2,4,0 1st
2,4,1 2nd
2,4,2 3rd

tnx

well.. after a week of tests, i finally got it working...


it wasnt neither a config problem nor mtbox problem, the key is the gateway routers you are using, after i changed them all started working perfectly...

Tip, use another MT, or sth like cisco for both gateways..

tnx for your help..

thats what sounds strange of it.., it would not be necessary to use failover, because the lines arent falling down, that is not the problem.. if i test the "theorically down" lines they work excellent on their own.. it only happens when after 10 minutes i loadbalance them.. to be more prec...

The main problem isnt the configuration of it.. in fact i can load balance exactly like the wiki says.. but.. 10 minutes after i finish the config (or after i reboot) one line aparently goes down and of course everything else stops working.. im asking if anyone else got stuck in the same situation, ...

Ip Packing support..


if anyone knows something about the usage of this tool just post here



tnx