Hi
how much is load of your cpu in evening(pick of your network)?
may be you have insufficient board for your network,for example may be RAM or CPU is low .
Hi
Queues work like firewall, sequence is important. it work from top to down.
you can add a simple queue to top of defined queue foe that address.
and define limitation unlimited.
Hi
add your vlan's to an interface and define trunk that interface in switch config.
'VLAN ID' is important, you must define a vlan id in switch with same name in mikrotik.
then define dhcp over that VLAN.
Hi
UM have no command for this problem.
you can save user information in variables and then delete that user and again create that user.
by schedule and a loop.
I think it's have no problem.
But it's better to have a backup in your userman data.
you can create a script and schedule it for daily backup and send backup to a FTP server.
Hi
UM don't have any command for renewing expired users.
you can create a script for expired users to save old information and create a user whith that information.
and schedule that script.
Hi I have a problem,some times after using usermanager this message occur in all user's browser. Then must reboot RB to solve the problem. My RB is CCR1036-12g-4s em My current RB Version is: 6.33.5 After update to version 6.33.1 this error occur. My Webproxy is also Disabled. http://i68.tinypic.com...
Hi
You must masquerade 192.168.Y.Y/16
And dstnat your Public IP in to that private IP in: Firewall=>Nat
For example a user in outside of network type address of Public IP,Mikrotik translate it
to your private IP.
Hi
I checked in download,too.There is no package.
hAp Lite is level 4.
Even if there is a package for this product,maximum active session for this license is only 20
Hi
You can use this script
/tool user-manager session remove [/tool user-manager session find where customer ="****"]
instead of **** you must type your customer name.
I don't think two provider be a good idea.
Load balancing have own problem,too.And not solve the problem.
Maybe using a pair of fiber solve the problem.
Hi
probably after upgrade to new version this problem occurred.yes?
new version have problem with userman.
you can downdrage to older version to solve this problem.
copy older version in Files,then go to system and select downgrage.
i have this problem too with new version.
After reboot user page work fine.
Not until you enter userman page.
so........
do every thing in userman page and then reboot router.
you can create users in hotspot temporary and move them to userman after a week.
after a week a reboot is require.
I find this solution for this problem.
:D A GOOD NEWS :D Hello to those who have this problem I sent an E-mail to mikrotik support and they replied: ============== Hello, Thank you very much for the report. We are aware of the problem. It will be fixed in the upcoming RouterOS versions. Regards, ============== today RouterOS is 6.12 and...
I know that clients belong to same VLAN,communicate with each other from layer 2 of OSI Model(Data Link).
and Router(MT) work on Layer 3 of OSI Model(Network).
I Know Basic concepts of network and read some books about it.
But i hoped that maybe there is a method to sole this problem.
I have one Cisco 3750 switch,about 20 Cisco 2950/2960.and about 15 Access point in my network.
All switch are managed switch.
in all switch i define VLAN and every thing work properly.
All Access points belong to a vlan.
rextended your answers are irrational! Because: ------------------------ Your First answer was: ==>" It's simple:use single vlan for each devices." and i told that: { hmmm rextended i have almost 2500 devices how it's possible. 2500 dhcp server and vlan! it's not practical. :( Thanks. } -...
Any system that belong to a LAN can directly communicate to other system in sameLAN. FOR EXAMPLE:192.168.100.20 to any system that are in range 192.168.100.0/24 ==>without need for routing so in above scenario we can't control traffic via router. but in separate LANs, it's necessary to clients routi...
hmmm rextended i have almost 2500 devices how it's possible. 2500 dhcp server and vlan! it's not practical. :( Thanks. >>> To prevent clients from communicating This is absurd.... Why is absurd! assume wanna to prevent a worm in network that published via special port. this is not a communicating b...
Hi by default in status page it show time left what's your problem exactly! if you want to show remain time in status page,can use variables in html code by mixing javascript. status page show session-left-time it's not user's remain time. But you can customize status page to show other informatiom
MikroTik has a ftp server imbedded you can access to ftp server via command prompt in windows or shell in Linux like this: c:\ftp type ftp/? in windows to get help command then write an batch file to access ftp server(mikrotik).schedule file to get file and copy it to local system and also write a s...
Hello to All Introduction: -------------------------- In a network that have several Vlans,we can control communicating between Vlans. For example, a client in range 192.168.100.0/24 with a client in range 192.168.111.0/24. Because these clients are in two different Vlans,thus for communicating to e...
Dear Box,error.txt is for Hotspot errors ----------------------------- For changing UM errors,you must change login page using javascript code copy this insteed error in loging page in $(error) $(if error)<br /><div style="color: #FF8080; font-size: 9px"> $(error) </div>$(endif) ----------...
:D A GOOD NEWS :D Hello to those who have this problem I sent an E-mail to mikrotik support and they replied: ============== Hello, Thank you very much for the report. We are aware of the problem. It will be fixed in the upcoming RouterOS versions. Regards, ============== today RouterOS is 6.12 and ...
Hi
There are many ways for upgrade
1)you can download upgrade file 6.12 and upload it to your ftp server and then reboot your router
2)you can download upgrade file 6.12 and drag it to files in router
3)From quick set click on check for update
Hi
by default in status page it show time left
what's your problem exactly!
if you want to show remain time in status page,can use variables in html code by mixing javascript.
Hi this is very easy -------- /tool user-manager user add customer=YOUR-CUSTOMER-NAME name=USER-NAME password=PASSWORD-FOR-USER -------- fill: YOUR-CUSTOMER-NAME with customer created in UM ==>But you can't assign a profile for created user,must manually do it. if your user are too much,you can use ...
Hello to All
I have same problem with x86,i think this problem is related to "customers" in UM
I delete other limited customer and reboot router, problem solved!
Now i have only one customer.
Maybe this be helpful for u...