Community discussions

Search found 16 matches

by Henrik
Tue Jun 16, 2009 1:59 pm
Forum: Wireless Networking
Topic: about RIC/522T and RIC/522C
Replies: 1
Views: 1000

Re: about RIC/522T and RIC/522C

No difference in range as they have the same antenna.
The difference is in different boards, 522T has a little bit more power, (64 vs 32 mb ram), and level 4 license. (AP)

The 522C has only level 3 licence (CPE/Client)
by Henrik
Fri Dec 05, 2008 1:38 pm
Forum: Wireless Networking
Topic: Mikrotik WISPs: Where?
Replies: 96
Views: 48778

Re: Mikrotik WISPs: Where?

Hello.

I know there are some professional WISP, and many semi-professional, and amateur based WISP's in Denmark use MT gear, mostly for infrastructure.

We are two wisp's working together and have 2000+ costumers in our area.

/BR Henrik
by Henrik
Wed Oct 10, 2007 10:16 am
Forum: General
Topic: Public IP's in "private" networks.
Replies: 4
Views: 1483

Re: Public IP's in "private" networks.

Thx. I thougth it would work like this. But its not working, and I think it's because of the adresses being routed in the private LAN belongs to the scope /23 between my GW and MY ISP GW. Then the same adresses i routed by a /23 going to ISP gateway and /24 pointing towards my LAN. Am I on the rigth...
by Henrik
Tue Oct 09, 2007 8:47 pm
Forum: General
Topic: Public IP's in "private" networks.
Replies: 4
Views: 1483

Public IP's in "private" networks.

Connected like ISP--GW--ROUTER1--ROUTER2--ROUTER3--Client Hello. I am working on routing our public addresses all the way trough the “private” net usually running NAT. I know the way by adding public IP on all the equipment and route like usually. Like we extend the public network all the way to the...
by Henrik
Mon Sep 17, 2007 9:16 pm
Forum: General
Topic: Mac-Telnet problem on laptops
Replies: 3
Views: 813

Re: Mac-Telnet problem on laptops

I just read this tread.

http://forum.mikrotik.com/viewtopic.php ... net#p87555

And i want to try this out first.

"I'll BE BACK"

Henrik
by Henrik
Mon Sep 17, 2007 8:58 pm
Forum: General
Topic: Mac-Telnet problem on laptops
Replies: 3
Views: 813

Re: Mac-Telnet problem on laptops

Dear Sergejs. I did not have the other interface on the laptop disabled, should that have an effekt? My acer laptop dont mind, and I have never experienced any problems with that one. Ip adress worked ok, but the problem was that I ... it up on the MT box :oops: Im sure that none used MAC-Winbox at...
by Henrik
Mon Sep 17, 2007 1:56 pm
Forum: General
Topic: Mac-Telnet problem on laptops
Replies: 3
Views: 813

Mac-Telnet problem on laptops

MAC-Telnet Does anyone know what causes the winbox trough MAC-telnet to crash on some laptops. The login procedure is disconnected, or the connection is lost 5 seconds after logging in. :? Its only on some laptops this is happening and with telnet trough another Mikrotik unit there is no problem. Th...
by Henrik
Wed Aug 15, 2007 5:23 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 28392

Re: Fight against P2P on port 80

Hi It should is possible to mark http connections exceeding a certain amount of B and classify it with a low priority in ques. And mark http traffic with low amount of Bytes, as surfing, and put it in front of the ques with a high priority. Then surfing would be higher priority than http Download. A...
by Henrik
Sat Jun 23, 2007 2:12 pm
Forum: General
Topic: Mark packet.
Replies: 6
Views: 1380

Re: Mark packet.

woops .. i wrote postrouting :oops: :oops: :lol: :lol:

I ment PRE-Routing.

Is it possible then, to add packet mark first in prerouting, make QOS in Quoues, end and later in forward mark users packet again for PCQ?

Best regards
Henrik
by Henrik
Thu Jun 21, 2007 11:54 pm
Forum: General
Topic: Mark packet.
Replies: 6
Views: 1380

Re: Mark packet.

I have read some more now :shock:

Is it right that I can/cannot –

In mangle: Put a packet mark in chain postrouting for making a traffic QOS in queues tree, and later on in mangle mark the packet again in chain forward to make example PCQ queues? :D :(


Best regards
Henrik
8)
by Henrik
Wed Jun 20, 2007 4:15 pm
Forum: General
Topic: Mark packet.
Replies: 6
Views: 1380

Re: Mark packet.

Thanks Normis.

Despites it wasn’t the answer I was hoping to get.
:( :( :(

Best regards
Henrik
by Henrik
Wed Jun 20, 2007 1:18 pm
Forum: General
Topic: Mark packet.
Replies: 6
Views: 1380

Mark packet.

Hello. In mangle - Is it possible to apply multiple packet mark.? example, one packet being marked for p2p traffic or DNS, http or other (QOS), and also marked for being a part of a group, for bandwith managment purposes. If you create 2 mangle rules and make passtrough on the first, will the second...
by Henrik
Tue Apr 03, 2007 12:02 am
Forum: General
Topic: Multiple gateways,single Ip and scope, problem.
Replies: 3
Views: 1025

Try mangle the /32 adresses with passthrough=no and put them before the /24 mangles..

/Henrik
Thx.

I have just edit my post. i hawe already tried this, and the /32 is now before the /24.

I think I hawe tried the passtrough=no command.
still not working.

/Henrik
by Henrik
Mon Apr 02, 2007 11:20 pm
Forum: General
Topic: Multiple gateways,single Ip and scope, problem.
Replies: 3
Views: 1025

Multiple gateways,single Ip and scope, problem.

Hello. :oops: :oops: Please help me saving the good reputation of mikrotik. :? I was bragging about Mikrotik to our network admin at work. He have got an offer from a consultent about 10k USD, to solve a challenge about routing company network out to 3 ISP. I said MikroTik was cheaper and better!! B...
by Henrik
Mon Jan 22, 2007 12:23 am
Forum: Wireless Networking
Topic: How close can you use channels in 802.11a.
Replies: 3
Views: 903

Read the faq or use search. :oops: :oops:

I believe you are refering to this topic.

http://forum.mikrotik.com//viewtopic.ph ... highlight=

Nice research.

Thanks.

Henrik
by Henrik
Sun Jan 21, 2007 8:52 pm
Forum: Wireless Networking
Topic: How close can you use channels in 802.11a.
Replies: 3
Views: 903

How close can you use channels in 802.11a.

Hello. I am wondering. :?: :?: :oops: Mikrotik supports several different steps in the 5.x band. Both 5 GHz with 5 MHz step, with 10 MHz step, and normal with 20 MHz step. How many channels are useable on the same tower? Can I use one with 5.505 and the next with 5.510 ? If I use turbo how close can...