Community discussions

MikroTik App

Search found 58 matches

by cwachs
Tue Nov 24, 2020 2:44 pm
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

Nothing with us. RMA'd two of ours and bought CCR 1036s to go in their place. My gut tells me it's going to be a while.
by cwachs
Wed Oct 28, 2020 5:02 pm
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

We did not go to ROS 7 beta but we did run a couple different version 6 betas as part of the test prior to RMA.
by cwachs
Wed Oct 28, 2020 4:48 pm
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

After almost a month of troubleshooting with Mikrotik, our 2004's have been RMAd. I would strongly encourage all of you with 2004s that are rebooting, freezing, etc to open support tickets with Mikrotik. They need data to solve this problem and the more data, hopefully the faster it can be solved.
by cwachs
Sun Oct 04, 2020 12:32 am
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

That is related. It was added to help support troubleshoot this. We are running that firmware at the request of Mikrotik to gather more information when it crashes. Has not done anything yet to stop the crashing.
by cwachs
Sun Sep 13, 2020 7:38 pm
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

We just had our 2004 crash with the debug firmware installed. The last line of the console output is: [admin@AUW-LOOKOUT-EDGE-02] > LOOPER: read_raw read failed: EOF died with signal Nothing before that for hours. After the crash, we got 2 physical link up/down messages in console (about 2 minutes a...
by cwachs
Sat Sep 05, 2020 1:55 am
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

we are running the same debug firmware on ours. Every one of our deployed 2004s is having some sort of problem (either random reboots or crashes or both).
by cwachs
Fri Aug 21, 2020 7:23 pm
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

I am shipping one 2004 back under RMA and our other one reboots every 1 -2 weeks. Was on 6.47 and I just put it on 6.47.2 two days ago. Both are running BGP and OSPF.
by cwachs
Sun Aug 16, 2020 6:03 pm
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

What are you all logging to "echo" in hopes of getting useful info in case of a crash? We have "critical, warning, health, system and event" echoing and nothing was on the console at all for our last crash.
by cwachs
Sun Aug 16, 2020 5:04 am
Forum: RouterBOARD hardware
Topic: 2004 hardware issues?
Replies: 28
Views: 4157

Re: 2004 hardware issues?

I'm having lockups on one of our two 2004s as well. It's an edge router with 4 bgp sessions (no full tables). About every 36 hours, it locks up where we can't access it via winbox, ssh and snmp stops. Sometimes it passes traffic through it, other times no traffic will pass. We got a console server o...
by cwachs
Wed Jun 24, 2020 11:53 pm
Forum: Wireless Networking
Topic: wAP 60 won't hold channel 66000
Replies: 0
Views: 471

wAP 60 won't hold channel 66000

I have been seeing an issue on both wAP 60 APs and LHG 60's where the AP will not hold on frequency 66000. I have set the scan list on the client to scan for 66000 (which works) and I manually set the frequency 66000 on the AP via CLI. It will change to 66000 and the station will lock up. Then, anyw...
by cwachs
Tue May 26, 2020 2:35 pm
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

Ahh, sorry. We do have two CRS3xx switches running ROS and they have not locked up. They are our core switches so it will be disastrous if they do...
by cwachs
Tue May 26, 2020 4:57 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 301
Views: 57803

Re: wAP 60G experience

We use both the dish and the panel SM. All 1G interface gear (not the Lite). Of our two APs having issues, both have 4 clients and of those 4, each have 2 dishes and 2 panels.
by cwachs
Tue May 26, 2020 4:39 am
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

CRS is having the same exact issue running SwOS. I've had issues with 2.9, 2.10 and 2.11
by cwachs
Sat May 23, 2020 12:35 am
Forum: Wireless Networking
Topic: Option 82 on wAP 60Gx3 links?
Replies: 0
Views: 521

Option 82 on wAP 60Gx3 links?

Is it possible to get Option 82 information across a link using a wAP 60Gx3 (or a wAP 60G) and clients? We use Option 82 in our network to authorize clients. Our Cambium and Mimosa equipment will pass along Remote Agent ID data but I am not able to get this working with 60G gear. I've tried turning ...
by cwachs
Fri May 22, 2020 8:48 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 301
Views: 57803

Re: wAP 60G experience

Following this. We have three wAP 60Gx3 AP's on our network. With 1 or 2 subscribers attached to them, MCS is solid at 8. As soon as I add the 3rd subscriber, all three subsribers fluctuate between MCS 1 and 6. Add a 4th and 5th and it gets worse. This happens on all 5 channels. Go back to 2 subscri...
by cwachs
Sun May 10, 2020 1:58 am
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

@Imacka, did this happen to you on a switch running Router OS, not Switch OS?? That would be I think the first report of this happening on a ROS switch. I thought the problem was just with switches running SwOS.
by cwachs
Fri May 01, 2020 9:38 pm
Forum: General
Topic: Trying to duplicate a SwOS feature on ROS...
Replies: 9
Views: 1851

Re: Trying to duplicate a SwOS feature on ROS...

I don't know the MAC of each customer device and each time they buy a new router, I will have to get the MAC in advance to authorize the port. This is where "lock on first" is perfect in SwOS. It allows any MAC address to connect to the switch but it only allows one MAC address per port. Pull the de...
by cwachs
Fri May 01, 2020 8:57 pm
Forum: General
Topic: Trying to duplicate a SwOS feature on ROS...
Replies: 9
Views: 1851

Re: Trying to duplicate a SwOS feature on ROS...

The client is supposed to only hook up the WAN port of their own personal router. We serve public IPs to the customers and each customer should only get one IP per apartment. That is what the lock on first and port lock feature allows. It works perfectly for us in SwOS and we are trying to duplicate...
by cwachs
Fri May 01, 2020 8:30 pm
Forum: General
Topic: Trying to duplicate a SwOS feature on ROS...
Replies: 9
Views: 1851

Re: Trying to duplicate a SwOS feature on ROS...

No. Client is an apartment resident that hooks up any kind of router they own to the network jack we provide in each unit.
by cwachs
Fri May 01, 2020 4:00 pm
Forum: General
Topic: Trying to duplicate a SwOS feature on ROS...
Replies: 9
Views: 1851

Trying to duplicate a SwOS feature on ROS...

Due to some software issues with SwOS, we are wanting to move our CRS326 series switches to ROS. We use these to feed Internet to apartment units and really need the "Lock on First" and "Port Lock" features that SwOS has that only allow a single MAC address to associate with a switch port. This prev...
by cwachs
Fri May 01, 2020 3:56 pm
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

We are looking at how to move our switches over to ROS because of this. It keeps happening and as a service provider, I can't keep having buildings go offline because a switch stops working. The only feature of SwOS we use that I have not found out how to duplicate in ROS yet is "Port Lock" and "Loc...
by cwachs
Mon Apr 06, 2020 4:42 pm
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

Does anyone that is having this issue have Flow Control turned off on all ports?
by cwachs
Sat Apr 04, 2020 5:45 pm
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

We've had two more switches fail with this same exact issue (all css326). I have filed a support request with Mikrotik two weeks ago but still no reply from them. I am now RMA'ing these switches and replacing them with CRS326 versions - but still running SwOS on them. So far, no issues on the CRS ha...
by cwachs
Wed Mar 25, 2020 9:17 pm
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

We had our second hang this week on two separate CSS326-24G-2S+ switches. While it was in the "down" state, I was able to confirm I could ping the switch up to a MTU size of 230 bytes. At 231 bytes, the packet was dropped by the offending CSS switch. Both of our hangs this week were under 2.10. We h...
by cwachs
Wed Feb 19, 2020 6:09 pm
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 117
Views: 32270

Re: CSS326-24G-2S+RM hangs until power cycle

We have 4 of these deployed in an apartment building and ended up buying a AC power adapter that pings the Internet and reboots the switch when the pings die. We got tired of driving over there in all hours of the day and night to reboot switches that hang.
by cwachs
Sun Sep 22, 2019 5:17 am
Forum: SwOS
Topic: MAC port lock reset?
Replies: 6
Views: 3272

MAC port lock reset?

We are using CSS326's in a MDU scenario. I'd like to use the "lock on first" feature to keep an apartment from grabbing more than 1 IP address. I have a couple of questions on this. Do I need to check BOTH "lock on first" and "port lock" for this to be active? What exactly does just "port lock" do? ...
by cwachs
Thu Aug 29, 2019 3:29 am
Forum: SwOS
Topic: Truncated port names - can't fit a MAC address
Replies: 0
Views: 1929

Truncated port names - can't fit a MAC address

We are using a CSS326 with FW 2.9. For billing purposes in our router, we pass along Agent Remote ID from the switch to the router (CCR 1009) and from there, it is sent to our DHCP batcher and on to the billing system. We need the Agent Remote ID to be a MAC address since our billing system works of...
by cwachs
Thu Jul 18, 2019 3:15 am
Forum: General
Topic: Possible to get port MAC used in Agent Remote ID field?
Replies: 3
Views: 641

Possible to get port MAC used in Agent Remote ID field?

We are trying to use Option 82 on a couple routers with devices connected locally. I'd like to turn on Option 82 on the bridge and get the router to forward the port MAC address as the "Remote Agent ID". It looks like it uses the port name for the Remote Agent ID and we have to have this in a MAC ad...
by cwachs
Thu Nov 22, 2018 2:03 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 301
Views: 57803

Re: wAP 60G experience

It is my understanding (from a hardware manufacturer) that the Mikrotik 60 Ghz radios have hardware that can handle channels 1 and 2. Channels 3 and 4 are done by stretching that hardware with software, so to speak. The chip used in the IgniteNet hardware is designed for channels 1-4 and channel 5 (...
by cwachs
Mon Jul 16, 2018 12:49 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 301
Views: 57803

Re: wAP 60G experience

Installed a LHGG-60ad link a few days ago. Couple questions for those that have some of these up: 1) Is there an SNMP OID for the RSSI? We are graphing signal and MCS but I prefer to capture RSSI. 2) What are you doing to aim? I have aimed Siklu, IgniteNet and other millimeter wave gear but the aimi...
by cwachs
Tue Jun 26, 2018 6:46 pm
Forum: General
Topic: EoIP bridge configured as a backup
Replies: 2
Views: 727

EoIP bridge configured as a backup

We have two identical Mikrotik routers in two locations (A and B). Each router is on a fiber connection to the Internet and configured with a number of VLANs on the LAN side. On each Mikrotik, VLAN 5 is configured in the 10.10.8.0/21 subnet as our management VLAN (no DHCP on VLAN 5). There is a wire...
by cwachs
Tue May 29, 2018 3:03 am
Forum: General
Topic: UPS and "Run Time" settings
Replies: 0
Views: 455

UPS and "Run Time" settings

I have recently started using a couple routers with the UPS package connected to compatible APC UPS devices. The data all seems to be there. What is confusing me is the "Off Line Time" and "Min Run Time" settings. The manual does not really clarify exactly what I am setting. What I want is for the r...
by cwachs
Tue Apr 17, 2018 6:32 pm
Forum: Beginner Basics
Topic: RSTP with a LAN bridge? [SOLVED]
Replies: 2
Views: 1270

Re: RSTP with a LAN bridge? [SOLVED]

I found I was not calculating the HEX value for root priority properly. Not sure why it defaults to priority 32768 but my attempts to fix that with a hex value were incorrect. I now have it set to "4096" using hex value "1000" and all seems to be happy.
by cwachs
Tue Apr 17, 2018 5:27 pm
Forum: Beginner Basics
Topic: RSTP with a LAN bridge? [SOLVED]
Replies: 2
Views: 1270

RSTP with a LAN bridge? [SOLVED]

I have a Mikrotik acting as an edge router. SFP1 is connected to our Internet provider. SFP2, 3, 4 are in a bridge acting as our LAN ports. Each of those SFPs is connected to a different Netonix switch via a fiber cable. All 3 of those switches are located at different physical points on our transmi...
by cwachs
Wed Jan 31, 2018 12:29 am
Forum: Beginner Basics
Topic: Pass public /30 through 2 Mikrotiks to customer [SOLVED]
Replies: 1
Views: 551

Re: Pass public /30 through 2 Mikrotiks to customer [SOLVED]

Solved it. My programming bad. In Mikrotik 1, I routed the new /30 to the vlan interface, not the public IP of Mikrotik 2. Now that Mikrotik 2 hears the /30 coming at it, routing is working properly through it.
by cwachs
Tue Jan 30, 2018 9:41 pm
Forum: Beginner Basics
Topic: Pass public /30 through 2 Mikrotiks to customer [SOLVED]
Replies: 1
Views: 551

Pass public /30 through 2 Mikrotiks to customer [SOLVED]

Up against a simple problem I can't solve... I have a /30 connection to my upstream ISP. They are sending me a separate /25 of public IP space to my edge router (Mikrotik 1). We then subnet that /25 down to /28's, /29's and /30's for internal use. We route those to various VLANs. All is great. Now, ...
by cwachs
Sat Jan 20, 2018 11:48 pm
Forum: General
Topic: Android devices fail to access https via L2TP
Replies: 0
Views: 383

Android devices fail to access https via L2TP

Hard to come up with a subject for this that encapsulates the problem... We are running an L2TP server on our router. It is used to access the management VLAN of our network. Our Mac and Windows devices connect to it just fine. Once connected, those clients can access all devices in our management V...
by cwachs
Wed Dec 06, 2017 1:56 am
Forum: General
Topic: Fasttrack & queue tree non-global queues
Replies: 4
Views: 2443

Re: Fasttrack & queue tree non-global queues

We are not running many firewall rules to take that much of a toll on CPU: add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=establi...
by cwachs
Tue Dec 05, 2017 8:17 pm
Forum: General
Topic: Fasttrack & queue tree non-global queues
Replies: 4
Views: 2443

Fasttrack & queue tree non-global queues

According to the Wiki on Fasttrack, it looks like it should work with PCQ queues that in the queue tree are attached to specific interfaces - not global: Warning: Queues (except Queue Trees parented to interfaces), firewall filter and mangle rules will not be applied for FastTracked traffic. We have...
by cwachs
Mon Nov 27, 2017 2:01 am
Forum: General
Topic: Need to pass VLAN from WAN to LAN [SOLVED]
Replies: 4
Views: 3860

Re: Need to pass VLAN from WAN to LAN [SOLVED]

Thanks for the help. I did start off as master/slave on the LAN side and then built a bridge. Forgot to move the LAN IPs to the bridge from the master port. My bad - thanks for catching. I'll try building a bridge for management. I'm not sure I am following you 100% on how to handle the mgt bridge a...
by cwachs
Mon Nov 27, 2017 12:32 am
Forum: General
Topic: CRS125-24G-1S with speeds capped at 150 Mbps?
Replies: 6
Views: 1210

Re: CRS125-24G-1S with speeds capped at 150 Mbps?

True true. I was just surprised by the totality of the throughput hit it took while in router mode. Lesson learned. :-) CRS has been reconfigured as a switch and put behind a routerboard.
by cwachs
Sat Nov 25, 2017 10:59 pm
Forum: General
Topic: Need to pass VLAN from WAN to LAN [SOLVED]
Replies: 4
Views: 3860

Need to pass VLAN from WAN to LAN [SOLVED]

Found a couple older posts on this but none that solved it... Using an RB750. On the WAN port, it has untagged Internet connection (with static public IP) and a tagged vlan5 management VLAN. LAN side of the router has ether2-5 bridged together with a private DCHP server and NAT running. All works gr...
by cwachs
Sat Nov 25, 2017 5:18 am
Forum: General
Topic: CRS125-24G-1S with speeds capped at 150 Mbps?
Replies: 6
Views: 1210

Re: CRS125-24G-1S with speeds capped at 150 Mbps?

Swapped out the CRS125-24G-1S with an identically configured RB 962... Doing the same test, my bandwidth shot up to 500 Mbps bidirectional. This is getting much closer to the backhaul speed. If I turn on fasttrack, I can get around 700 Mbps each direction. So, not going to be using the CRS125-24G-1S...
by cwachs
Fri Nov 24, 2017 11:35 pm
Forum: General
Topic: CRS125-24G-1S with speeds capped at 150 Mbps?
Replies: 6
Views: 1210

Re: CRS125-24G-1S with speeds capped at 150 Mbps?

Export of router/switch: /interface ethernet set [ find default-name=ether24 ] auto-negotiation=no name=WAN rx-flow-control=auto speed=1Gbps tx-flow-control=auto set [ find default-name=ether2 ] master-port=ether1 name="ether2 #420" set [ find default-name=ether3 ] master-port=ether1 set [ find defa...
by cwachs
Fri Nov 24, 2017 10:12 pm
Forum: General
Topic: CRS125-24G-1S with speeds capped at 150 Mbps?
Replies: 6
Views: 1210

CRS125-24G-1S with speeds capped at 150 Mbps?

Running a brand new CRS125-24G-1S with firmware 3.41 and ROS 6.40.5. Very simple configuration. Port 24 is WAN and all other ports are slaves to ether1. Switch is handing out IP's via DHCP. No queues of any kind are active. Very basic firewall. Pretty vanilla build so far. My problem is throughput. ...
by cwachs
Tue Oct 24, 2017 5:10 pm
Forum: Beginner Basics
Topic: Router to Router VLAN link over L2TP [SOLVED]
Replies: 5
Views: 1698

Re: Router to Router VLAN link over L2TP [SOLVED]

This is fantastic! Works perfectly. I ended up not using a L2TP VPN for now - just using the public IPs at the remote address for the EoIP tunnel and it's doing exactly what I need. So happy. Thanks!
by cwachs
Mon Oct 23, 2017 9:58 pm
Forum: Beginner Basics
Topic: Router to Router VLAN link over L2TP [SOLVED]
Replies: 5
Views: 1698

Router to Router VLAN link over L2TP [SOLVED]

This seems trivial but I'm failing miserably... I have 2 CCR routers both on public IPs. Both have a VLAN (VLAN5) that is our management VLAN. On both routers, VLAN5 is configured as 10.10.8.0/19. Every device (couple hundred) in that VLAN has a static IP. There is a DHCP server on Router 1 for addr...
by cwachs
Tue Oct 17, 2017 11:22 pm
Forum: Beginner Basics
Topic: 2 dynamic ISPs enabling failover
Replies: 2
Views: 7256

Re: 2 dynamic ISPs enabling failover

Any reason this does not have "find distance=1" and "find distance=2" in the script? Those are my distances for WAN 1 and WAN 2. Is that related??
by cwachs
Tue Oct 17, 2017 6:32 am
Forum: Beginner Basics
Topic: simple 2 WAN failover
Replies: 16
Views: 68428

Re: simple 2 WAN failover

I'm coming back trying to solve this on my router... I have 2 WANs. One has a /30 gateway connection and a /24 of public space assigned to me. It is the primary WAN that all traffic should flow over. WAN 2 has a DHCP address on the WAN side and no public space. My LAN port has a handful of VLANs on ...
by cwachs
Wed Dec 23, 2015 11:55 pm
Forum: RouterBOARD hardware
Topic: CCR ethernet port failures?
Replies: 10
Views: 2340

Re: CCR ethernet port failures?

I am on my second brand new CCR-1009-8G-1S-1S+ router with a bad ETH 1 port out of the box. It is really frustrating. This is a core router for us so I can't live with it gone for 3 months on a RMA.
by cwachs
Thu Oct 01, 2015 5:21 am
Forum: Beginner Basics
Topic: DHCPv6 from cable co. now what
Replies: 25
Views: 6585

Re: DHCPv6 from cable co. now what

I've been playing off and on with IPv6 on my router for about a year. I have also swapped out my Mikrotik with a Ubiquiti EdgeRouter for a while while I was testing it. I am able to get IPv6 working fine with the Ubiquiti router, as well as computers hooked directly to the Comcast modem. So, it seem...
by cwachs
Sun Aug 30, 2015 7:17 pm
Forum: General
Topic: Policy Based or static route for Netflix on dual WAN
Replies: 2
Views: 1711

Policy Based or static route for Netflix on dual WAN

I have a dual WAN setup where I prefer WAN1 for most outbound traffic but want to force traffic to the other WAN2 for Netflix since that ISP has a peering agreement with Netflix and the performance is better. I am not sure if I want to build static routes for Netflix and point to that gateway - whic...
by cwachs
Tue Aug 25, 2015 5:13 am
Forum: Beginner Basics
Topic: Don't want inter VLAN routing
Replies: 0
Views: 450

Don't want inter VLAN routing

I have 2 VLANs set up along with the default (no VLAN). The 3 networks all have separate DHCP pools and they are working properly. I get the correct IP based on the VLAN I am connected to. My problem is, computers on VLAN30 (10.30.1.x) are able to communicate with computers on the default VLAN (10.9...
by cwachs
Sun Nov 16, 2014 11:59 pm
Forum: Beginner Basics
Topic: DHCPv6 from cable co. now what
Replies: 25
Views: 6585

Re: DHCPv6 from cable co. now what

After a few weeks of working on getting IPv6 working, I'm still not up despite other success stories. ISP: Comcast in Colorado. I am doing the following steps with ROS 6.2: /ipv6 dhcp-client add add-default-route=yes interface=ether1-WAN pool-name=IPv6 use-peer-dns=yes It binds and shows a prefix co...
by cwachs
Tue Sep 30, 2014 12:54 am
Forum: Beginner Basics
Topic: Firewall rule killing PPTP server
Replies: 1
Views: 2843

Firewall rule killing PPTP server

Admission #1: not an expert at firewall rules. Accept my apologies up front since this is likely a dumb question.... Built a list of firewall rules based on the "basic rule set" in the wiki: /ip firewall filter add action=drop chain=input comment="Drop Invalid connections" connection-state=invalid a...
by cwachs
Fri Sep 26, 2014 6:52 pm
Forum: Beginner Basics
Topic: DHCPv6 from cable co. now what
Replies: 25
Views: 6585

Re: DHCPv6 from cable co. now what

This has been the most helpful post so far but I'm still failing the IPv6 tests. I am connected to Comcast and I pass the tests if I hook my Mac directly to the modem. When I'm connected to the router, I get an IPv6 address on my computer but I fail IPv6 tests. I'm fairly certain I have done somethi...
by cwachs
Thu Sep 25, 2014 4:54 pm
Forum: Beginner Basics
Topic: IPv6 not active ?
Replies: 2
Views: 901

Re: IPv6 not active ?

is ipv6 menu missing in CLI or in Winbox or both? are all the packages on the router from same RouterOS build (check in '/system packages') The are missing in Winbox but are present in CLI (which I am usually not smart enough to use well). My packages are all version 6.19 and every one is enabled e...
by cwachs
Thu Sep 25, 2014 7:56 am
Forum: Beginner Basics
Topic: IPv6 not active ?
Replies: 2
Views: 901

IPv6 not active ?

I am running software 6.19. I have enabled the ipv6 package and rebooted the router. It shows that package as active. However, I do not have the IPv6 menu and I don't seem to be able to find a way to configure anything related to IPv6. My end goal is to use IPv6 addresses from the Comcast DHCP serve...