Community discussions

MikroTik App

Search found 8 matches

by rayvyn
Wed Jul 31, 2019 1:32 am
Forum: General
Topic: EOIP and Portforward
Replies: 7
Views: 1155

Re: EOIP and Portforward

# jul/30/2019 13:40:00 by RouterOS 6.44 # # model = 1100AHx2 /interface bridge add fast-forward=no name=br-lan add fast-forward=no name=lo0 /interface ethernet set [ find default-name=ether6 ] name=lan1 speed=100Mbps set [ find default-name=ether7 ] name=lan2 speed=100Mbps set [ find default-name=et...
by rayvyn
Sat Jul 27, 2019 3:02 am
Forum: General
Topic: EOIP and Portforward
Replies: 7
Views: 1155

Re: EOIP and Portforward

/interface eoip add local-address=1.1.1.1 name=eoip remote-address=2.2.2.2 tunnel-id=1 /ip address add address=1.1.1.1/30 comment="Default OUT/IN" disabled=yes interface=wan1 network=1.1.1.0 add address=2.2.2.3/29 interface=eoip network=2.2.2.0 add address=2.2.2.4/29 interface=eoip network=2.2.2.0 a...
by rayvyn
Fri Jul 26, 2019 11:17 pm
Forum: General
Topic: EOIP and Portforward
Replies: 7
Views: 1155

EOIP and Portforward

I have a small webservice behind a mikrotik RB1100, when I do a "normal" portforward (dst-addr="WAN IP provided by ISP" dst-addr="Server Local IP") it works fine, but I want to add additional IP's to it. So I created an EOIP tunnel from my router to another site and assigned several Public IP's of m...
by rayvyn
Tue Apr 04, 2017 1:25 am
Forum: General
Topic: Mobile Users IPSEC
Replies: 16
Views: 2911

Re: Mobile Users IPSEC

This works great with one exception...I dont want to route ALL of their traffic (ie: i dont want them to access the internet through my Mtik) I just want to grant them access to specific Internal resources....

How canI do that?
by rayvyn
Fri Apr 22, 2016 2:44 am
Forum: General
Topic: How to transport customer vlans within my network
Replies: 0
Views: 278

How to transport customer vlans within my network

I want to transport my customer vlans across my network and I normally would do EOIP but in this case both endpoints are not Mtik...

Also I dont know or care what my customers vlan is so I want a way to do so without that information.

Any assistance is greatly appreciated.
by rayvyn
Sat Sep 12, 2015 5:22 am
Forum: Wireless Networking
Topic: How to transport a vlan
Replies: 10
Views: 12257

Re: How to transport a vlan

I have the following scenario: Cisco3750 f0/1 --> sextant5 --> sextant5 --> rb450gl The cisco interface is a vlan trunk the AP is configured in ap bridge and wds dynamic the bridge consists of eth1 and wlan1 cpe is station wds, wds dynamic and same bridge config. the rb450 is configured as follows: ...
by rayvyn
Mon May 19, 2014 8:29 pm
Forum: General
Topic: Need assistance in configuring 1100AH-X2 Router
Replies: 2
Views: 625

Re: Need assistance in configuring 1100AH-X2 Router

There is no particular reason as to why I chose that port, what is the difference if I had used another port?
by rayvyn
Fri May 16, 2014 6:29 am
Forum: General
Topic: Need assistance in configuring 1100AH-X2 Router
Replies: 2
Views: 625

Need assistance in configuring 1100AH-X2 Router

I need to configure several vlans on the router as well as NAT from one of the vlans, I "think" I have the vlan thing configured but i do not know how to NAT from one of those vlans. My config is as follows Cisco trunk ---> BaseBox5 ------ PTP BRIDGE LINK ----- BaseBox5 -----> ether13 trunk on RB110...