I've found this topic https://forum.mikrotik.com/viewtopic.php?t=135119 where marekm said "RouterOS has had the ability to work as GPS synchronized NTP server for a long time - but its accuracy was limited by missing 1PPS support. " So it must work but with lack of accuracy. Will it be a g...

Hello!

I wanna to build ntp server with gps-time collecting based on mikrotik.

Could LtAP mini act as gps ntp server using built-in gps module ?

Thanks

Hello all! RB1100 ahx2 suddenly started to drop packets on wan connections. The configuration didnt changed. In this case when i'm trying to reboot device using winbox or terminal command it hangs.- Nothing happens on console interface too. Only hard-reboot solves problem for a while. No high cpu lo...

Let me up this topic, cos no answer recieved,

Hello! Can't find clear information about what last SwoS version, that this device (RB250gs) could support. As i understood - version 2.7 for new RB260GS(CSS106-5G-1S) is not appliable. Where to download previous firmware? https://mikrotik.com/download/archive has only RouterOS versions, not SwOS Th...

Good day! I got a plan to bulid a 1u x86 board on asrock QC5000-ITX/PH. As for ethernet card everything is clear - Intel® PRO/1000 PT Quad Port on a pci-e x4 slot (just tested - works fine), but for wireless networking i a lot doubts... the plan is to use mini pcie x1 slot on mobo. it would be conne...

Have you tried 2 BGP Instances (different local AS) and 2 separate Peers?
If you are running 2 x default routes, maybe a local VRF-Lite might help if you want to separate the routing tables.

Solved. It's a good idea not to forget about routing filters (to separate announces from each AS)

Hello everyone, Can't find a solution how to configure. I have two AS with different pools of real ip. Can't combine them in RIPE because of "corporate issies". Each of this AS are stub, so I have the only one uplink, that sends me default route for each AS. Neighbor is same too, but p2p a...

becs Would it be supported in next swos version ? switch chip and cpu are the same with 260's :( And I can't understand how rb250gs correctly works with rb912 trunk ? all vlans on 912 have same mac which must be dropped in SVL on rb250, but the forward correctly. How ? btw, does 260 series support ...

Well I got an 1.15 update but there is no IVL feature. I cant understand why - 8316 could support this.

docmarius, thanks to your reply. First of all, dlink switch is DGS-1100-06/me - it is managed l2 and work with vlans well . I thought it is clear because on the picture i use untagged and tagged vlans on it. If the tagging from Dlink is correct and the Dlink does its job correctly, then, of course, ...

87 views, but no answer. Well I got a picture for better undestanding. It's really bug, i cant solve it

Hello, got a problem on rb250gs, fw 1.14 Two trunk ports are configured - vlan mode strict, vlan header - add if missing. It is not working when forwarding same mac address with different 802.1q tags. Changings one of the macs solves problem, but in my situation it isnt possible. Could this be solve...

Caught a bug after 6.33.3 update. rb912uag-2hpnd has a 1G link with rb250GS (swos 1.9). After rb912 updating link began flapping. Cable is fine, tested with dlink 1G switch. no tx/rx errors. 25 link flaps in hour! Not able to downgrade  I’ve “Solved” problem by linking via 100M - disabled 1000M hal...

Hello! Got a really stuck with setup: rb2011 + apc rs 1500va. RB2011UiAS-2HnD-IN, ROS 6.33.3 - package UPS installed. I've connected it with a proprietary apc cable like this: (rj50 to usb) http://store.softline.ru/uploads/hardware_product/d2a4a1c804e0685808fd20402fe18a5cea5e2d00_1.jpeg it is connec...

Is there hardware switch chip in hap lite, like Atheros8327 in 951G?

thanks

Really good news! r11eac is seems based on AR9882 2*2, what about AR9880 and 3*3? I saw replies on other forums that compex ar9880 3*3 solution don't work yet with mikrotik. And it is damn expensive :( Would this card (r11eac) work with 912-series (external mini-pcie), not only with rb800/900 board?...

yes, you can put a wifi card (like R11e) in the mini-pcie slot and connect a 3g usb modem to the usb port. found this on wiki and got confused :( RB912 USB port type RB912 series have USB port and miniPCIe slot. Due to hardware restrictions it is possible to use only one at the time. Available prop...

Hi, I got really stuck with Huawei 3g dongles. rb2011 ros6.13 At first I bought not listed in supported hardware Huawei e3131 (fw 21.158.00.00.1020). I created manualy "ppp-out" connection, made dongle work as "modem only mode" (AT^SETPORT="A1,A2;1,3,2") and got reconne...

Hi guys! rb912uag series There is no clear answer in specs to the topic. I wanna use usb 3g dongle and some high-power mini-pcie wifi card (like R11e-5HnD) at the same time on this board. I know that if I use mini-pcie slot for 3g card there will be no way to bring up usb port, but what about 3g usb...