Community discussions

Search found 12 matches

by NetNotGross
Fri May 30, 2014 6:54 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

Can you upload the print output from /router ospf lsa on the branch router so that we can see its view. That should let us see the LSAs it is receiving at the moment.
by NetNotGross
Wed May 28, 2014 8:58 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

Both hub routers should end up knowing both routes within OSPF but only the currently active route (as determiend by OSPF) is inserted in the main routing table. You can see which routes are being advertised to either of the hub routers by looking at LSAs. I suggest that you upload the OSPF config e...
by NetNotGross
Wed May 28, 2014 6:34 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

What costs do you have on the two links to the branch and on the link between the 1100 routers? The total cost of the path to the branch from either router must be lower on the EoIP path. e.g. if the cost of the path between the routers is 10 and the EoIP branch path is 20 then you would make the br...
by NetNotGross
Wed May 28, 2014 1:43 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

Check that both links are configured for OSPF and have their networks included in the branch area. On the branch router you should show 2 neighbor entries - one at end of each link. You can also check the body of the LSA and see if it shows both paths. Make sure that interface costs are assigned cor...
by NetNotGross
Tue May 27, 2014 8:23 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

R2 seems to have inject-summary-lsas=yes on the stub area. Check that the branch routers and their links from head office only have stub area settings on them now. The head office router should be carrying out the ABR function. If above doesn't show a difference after correcting perhaps more config ...
by NetNotGross
Mon May 26, 2014 7:03 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

When I declare a network on RB's OSPF and it creates a dynamic interface, it means that interface will start to advertise(considering no passive configurations), right? Correct. Can I declare an interface without declaring the network that is binded to it? Will RouterOs accept it and start to adver...
by NetNotGross
Mon May 26, 2014 6:34 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

You can advertise networks simply by declaring them in OSPF networks. The system creates dynamic interfaces for any interfaces included within the network definitions. If you want more control over things like cost, network-type, authenticaton etc. then it is normal to create interfaces manually. To...
by NetNotGross
Fri May 23, 2014 6:55 pm
Forum: Forwarding Protocols
Topic: OSPF Redundancy and Summarization
Replies: 58
Views: 10034

Re: OSPF Redundancy and Summarization

To fix your original OSPF config you can either resditribute static routes from the hub routers (assuming a hierarchical IP layout) thus avoiding ABR/ASBR summarisation restrictions - or use multiple areas. To use one area per branch: 1) Create a new area for each branch on both the branch router an...
by NetNotGross
Fri May 23, 2014 3:44 pm
Forum: Forwarding Protocols
Topic: CCR and Internet BGP - survey of user experiences
Replies: 24
Views: 9604

Re: CCR and Internet BGP - survey of user experiences

We had problems around the point of 4 full feeds but I don't thing we ran the problem to ground. We were hitting various other CCR limitations at the time so it wasn't the most important item for resolution. At this point I don't think it is possible to fully "integrate" Mikrotik equipment as part o...
by NetNotGross
Fri May 23, 2014 3:32 pm
Forum: General
Topic: CRS documentation
Replies: 79
Views: 30249

Re: CRS documentation

Any estimate on when the wire speed IP forwarding will be implemented?
by NetNotGross
Wed May 21, 2014 7:27 pm
Forum: General
Topic: Hybride WAN
Replies: 5
Views: 902

Re: Hybride WAN

If it is importartant to achieve this you could also use an independent aggregation point. It might be around 20-25 EUR / month for say 2000 Gb.
by NetNotGross
Wed May 21, 2014 7:23 pm
Forum: General
Topic: CRS documentation
Replies: 79
Views: 30249

Re: CRS documentation

How complete is the CRS functionality in the latest firmware? Is it able to perform all the basic functions of a VLAN capable switch at this point?

Thanks