... and that's not possible with SMIPS, as it is with the others.

Ok, thanks, I didn't know. Sorry but I have no experience with SMIPS devices

Hi at all, I've read about the problems of the low disk space. Excuse me for the stupid question, but this problem is limited to the SMIPS architecture? Because also others mikrotik devices have only 16Mbytes of disk space, but, in my case, the upgrade from the 6.46.8 to the 6.47.10 version worked w...

Hi / Ciao :-) I haved your same problem. I've bought in past a E3372h-153 (and unlocked the full features) and now i needed another one. So, i've searched the OLD E3372 but without success. After more searches i've found the Alcatel IK40V-2BALIT1 that solve my problems. The Huawei has a better anten...

Hi,

the antenna-gain parameter is not visible in Winbox. Using the command line it's possibile to change the parameter. The Winbox version is 3.27 and with the RouterOS 6.45.9 version there's no problems

Thanks

anuser - To what kind of a problem do you refer to ViniciusMariano - Seems like the issue which is not resolved in v6.46.3 and v6.47beta. Fix will also be included in the next long-term release kos - We are currently looking into this huntah, sport80, Maggiore81, bpwl - If you do experience such a ...

hi, for me no reboot problems with hap ac2 (uptime 26h), but I have another problem. I have a Netgear modem configured in bridge mode to my RB3011 and the dhcp client on the interface so the public address is released directly to the mikrotik. I've also configured a private lan between the mikrotik ...

Found the solution
I don't know why, but it was configured to "yes"

Thanks

Hi, Today i've connected my Huawei E3372 (that works correcty with all the others my routerboards like hAP AC, hAP AC^2, hEX, RB951G and also with the RB751G) to my RB3011RM but the RouterOS does not detect the LTE interface. The USB peripheral will correctly detected but it does not add the LTE int...

TLS+failed OpenVPN
Certificate migration issue
viewtopic.php?f=2&t=143045&p=743141#p743141

Same problem to me

Hi, i've tried to upgrade a CCR1009-8G-1S of my customer from 6.37.5 to 6.39.1. The upgrade works without problem. But the reason of upgrade is that my customer need a IKEV2 IPSEC for your business necessity. The IPSEC stop to working when i've enabled the new IKEV2 configuration. The same configura...

I can confirm flapping and other problems (the port goes up only for one second) on the second switch of RB 2011 (eth 6 to 10). Please fix this problem asap. Hi, fortunately i don't have the problem that you have described. I have more than one RB2011UiAS-RM that are currently using the eth6 to 10 ...

Ok, i've tried using -rep package

very very good! Now the wireless signal are very stable using 802.11ac. The same transfer rate described before, now are running without problems and the transfer rate are betwheen 270 to 300 REAL Mbit/s!

Thank you very much!!!

Please read the topic above your post. You must use the "-rep" package in the RC branch to have the issue fixed. Ok, so, i must to install the wireless-rep package by downloading it from all_packagest-mipsbe archive I've read this post If we will not find any more issues with the wireless...

Hi, i have bought an hAP ac 4 days ago and i have a strange problem with AC mode. My transfer rate in AC mode start very slow, 2,5 - 3,7 Mbytes/s and then goes high to 30 Mbytes/s, but after few seconds the wireless interface on hAP hangs out and close all the connections, after few seconds it resum...

Anyone can help me?

Hi at all first of all: i'm working with mikrotikt device from 3 years and i'm really very satisfied of RouterOS system! Thank you very much for your work! My problem is about OpenVPN implementation in RouterOS. I have 4 Mikrotik devices connected through OpenVPN to a CCR 1009 central system. This c...