Community discussions

Search found 58 matches

by OnixJonix
Mon Nov 12, 2018 12:01 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests

Something like TORCH on firewall rule!
It would be great if i can select firewall rule and click on torch - and see what traffic is triggering on that rule!
by OnixJonix
Fri Jun 15, 2018 8:56 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113431

Re: v6.43rc [release candidate] is released!

Big problem...
Updated Mys CCR (to 6,43rc27) an now stucked outside! All is running but cant connect - wrong username or password??? A bit of PANIC!!!

------------------
Sorry! Had two winbox on my pc!! Just need new winbox! Sorry!
by OnixJonix
Fri Apr 20, 2018 9:35 pm
Forum: Announcements
Topic: Photos of towers and masts
Replies: 55
Views: 15680

Re: Photos of towers and masts

For anti slipping we use construction tape which - is used for concrate floor perimetere for elastic barrier.
by OnixJonix
Fri Apr 20, 2018 6:56 am
Forum: Announcements
Topic: Photos of towers and masts
Replies: 55
Views: 15680

Re: Photos of towers and masts

Hi!
Installation on chimny ~50m hight! We have monted SXT (x3), Mant (x1), DynaDish (x3). We welded special brackets, becouse previous version what we monted on aluminium pipe, was very unstable and was moving in the wind! This is very strong bracket no moving at all!!
by OnixJonix
Wed Feb 07, 2018 4:29 pm
Forum: General
Topic: Torch results!!! Traffic to nowhere src Port 0 Dst Port 0
Replies: 0
Views: 305

Torch results!!! Traffic to nowhere src Port 0 Dst Port 0

Hello!
Im confused! For other purpose checked TORCH tool and saw interesting traffic with no SRC or DST IP address and ports - but pretty heavy traffic!! Could somebody can explain??
torch_traffic.PNG
by OnixJonix
Mon Feb 05, 2018 10:38 pm
Forum: The Dude
Topic: Show on appearance: Label ROS command [SOLVED]
Replies: 3
Views: 950

Re: Show on appearance: Label ROS command [SOLVED]

Resolved with SNMP With SNMP walk get OID with my current channel running! Creat the function (named: WifiChannel ) and put in appearance ( WiFi_Freq: [WiFiChannel()] . So now i know what frequency my AP is running! Function WifiFChannel: oid("iso.org.dod.internet.private.enterprises.mikrotik.mikrot...
by OnixJonix
Mon Feb 05, 2018 11:38 am
Forum: The Dude
Topic: Show on appearance: Label ROS command [SOLVED]
Replies: 3
Views: 950

Re: Show on appearance: Label ROS command [SOLVED]

Sadly no answer there!! Cant see the possibility to split output!!
by OnixJonix
Sun Feb 04, 2018 9:57 pm
Forum: The Dude
Topic: Show on appearance: Label ROS command [SOLVED]
Replies: 3
Views: 950

Show on appearance: Label ROS command [SOLVED]

Hi! Want to show in label info of wireless link, but dont want all of it! It is possible to show only some entries?? For example want to show only channel and overall-tx-ccq! [ros_command(":put [/interface wireless monitor numbers=wlan1 once]")] status: running-ap channel: 5600/20/ac/DP wireless-pro...
by OnixJonix
Wed Nov 01, 2017 8:46 am
Forum: The Dude
Topic: Dude v6 - Feature request list
Replies: 66
Views: 17968

Re: Feature request list for Dude v6

Demn!! So stupid... now it is so obvious!! Thanks man!! In the map view add device comments and some notification mark that shows that comments are added, what you can see when you move mouse over - like comments in MS excel for example!! Sometimes it is necessary to comment some configuration if yo...
by OnixJonix
Tue Oct 31, 2017 4:35 pm
Forum: The Dude
Topic: Dude v6 - Feature request list
Replies: 66
Views: 17968

Re: Feature request list for Dude v6

In the map view add device comments and some notification mark that shows that comments are added, what you can see when you move mouse over - like comments in MS excel for example!! Sometimes it is nessessary to comment some configuration if you noticed some problems or give some comment about conf...
by OnixJonix
Tue Sep 26, 2017 12:37 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests

Make Address List from DHCP lease table!!
For example - select multiple LEASE entries and put them in address list (then you can use for firewall)!! Something like in wirelless - you can add entries from registration table to access list!!
Thansk!
by OnixJonix
Wed Sep 20, 2017 3:02 pm
Forum: The Dude
Topic: Feature request - Different appearance for UP and DOWN events
Replies: 2
Views: 776

Re: Feature request - Different appearance for UP and DOWN events

Also Different Appearance labels for different type of devices!!
by OnixJonix
Tue Apr 18, 2017 8:25 am
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests - CAPS Logs explained

No certificates at all!! Maybe thats the problem?? Another guess- CAPs with duplicated MAC addresses. Do you happen to use backup/restore to clone configuration of CAP devices? Have ~50Caps - in Capsman Radio list shows all, and in the list no dublicated macs!!! This was my first gues, but seems th...
by OnixJonix
Thu Apr 13, 2017 1:08 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests - CAPS Logs explained

caps,error removing stale connection [E4:XX:8C:D4:11:99/18/b823,Run,[E4:XX:8C:D4:11:99]] because of ident conflict with [E4:XX:8C:D4:11:99/18/e84d,Join,[E4:XX:8C:D4:11:99]] You might be using the same certificate on multiple CAPs. Take this as an educated guess, not a definitive answer. No certific...
by OnixJonix
Thu Apr 13, 2017 10:32 am
Forum: General
Topic: Feature requests
Replies: 1160
Views: 208014

Re: Feature requests - CAPS Logs explained

Please come up with CAPS logs explanation!!!! Stuck with capsman problems - see problems in log files, but not sure what it mean an what direction look for!! for example: caps,error removing stale connection [E4:XX:8C:D4:11:99/18/b823,Run,[E4:XX:8C:D4:11:99]] because of ident conflict with [E4:XX:8C...
by OnixJonix
Wed Apr 12, 2017 11:36 am
Forum: Wireless Networking
Topic: CAPsMAN errors in log
Replies: 8
Views: 7403

Re: CAPsMAN errors in log

Same with me! Cant find problem! My caps are dissconnecting and reconnecting!!
Cant find log description!! Mikrotik team what the log mean??? What causes that???
by OnixJonix
Tue Apr 11, 2017 9:34 pm
Forum: Wireless Networking
Topic: CAPSMAN (CAPS)- log message someone explaine???
Replies: 4
Views: 1724

CAPSMAN (CAPS)- log message someone explaine???

I have ~50Caps in wide area! I have problem - my clients are disconecting for ~10 seconds and then connected back, but clients connection is broken!! Read a lot of topics who suggested -all caps with Static ip -try to make all caps work in best channell Still problem!! I notice my log - marked with ...
by OnixJonix
Fri Apr 07, 2017 7:20 am
Forum: Announcements
Topic: The Dude, v6.39rc test builds.
Replies: 121
Views: 28559

Request...

1. (Winbox) In CapsMan REGISTRATION TABLE add column with client IP and Active Host Name like in dhcp server lease section!!

2. (Winbox) In DHCP Lease section when pressed right mouse button on client add Torch and Ping option!!
by OnixJonix
Tue Mar 07, 2017 4:43 pm
Forum: The Dude
Topic: Check CAP state via DUDE
Replies: 2
Views: 521

Re: Check CAP state via DUDE

Realy noone is monitoring your WiFi?? Any Ideas? I tried all listed services - noone is accurate for caps!!
by OnixJonix
Thu Mar 02, 2017 9:11 am
Forum: The Dude
Topic: Check CAP state via DUDE
Replies: 2
Views: 521

Check CAP state via DUDE

Hello! I have a lot CAP deployed in my infrastructure, all work fine (Thanks Mikrotik for great solution)!! Now i want to add them to monitoring system! The problem is that i monitor via DUDE for example PING, but there are many cases where ping responds, device works fine but CAP isnt working for s...
by OnixJonix
Thu Feb 16, 2017 7:08 am
Forum: General
Topic: Detect Attack
Replies: 12
Views: 2431

Re: Detect Attack

Look at Profile!! Which service is using resources! There is no way that your CCR struck on 10-15Mbps! Impossible! It can handle lot more!! Try newest version! Seems like a bug or hardware problem to me! Make fillter in firewall - limit connections to one IP! Search for - prevent DDOS in this forum ...
by OnixJonix
Wed Feb 15, 2017 9:08 pm
Forum: The Dude
Topic: Icon set for the dude
Replies: 5
Views: 2495

Re: Icon set for the dude

Mikrotik can do the job! Order for all your devices vectors!! The Dude map will looked great!
by OnixJonix
Mon Jan 23, 2017 3:40 pm
Forum: Announcements
Topic: Newsletter 75, January 2017
Replies: 55
Views: 16813

Re: Newsletter 75, January 2017

CRS125 also will bee bootable in dual boot?? RouterOS and SWos??
by OnixJonix
Tue Dec 20, 2016 9:39 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 39495

Re: The Dude, v6.38rc test builds.

Vector graphic for dude - all Mikroti Devices???
by OnixJonix
Mon Dec 12, 2016 9:54 pm
Forum: General
Topic: Weird 129.0.0.x IPs ?
Replies: 30
Views: 4595

Re: Weird 129.0.0.x IPs ?

Same problem on CCR-1036 RouterOS 6.37.rc13!!!! Someone have found problem?!?!??! Traffic cant catch on firewall!! Dont show in Tourch!!! Most packets are damaged! I found that the IP is from Cameroon and some connection with Online Money MTM... i was thinking- discovered the problem - mobile phone ...
by OnixJonix
Thu Oct 27, 2016 1:20 pm
Forum: Wireless Networking
Topic: Who can explain - spectral-history and spectral-scan output
Replies: 0
Views: 608

Who can explain - spectral-history and spectral-scan output

Hi!
i have readed the manual about both of them! Cant understand the output! What is good what is bad! Maybe someone can explaine what to look for! if im looking for clearest channel?!!
For example output: (hisotry)
spectrumhistory.PNG
Scan:
scan.PNG
by OnixJonix
Tue Oct 04, 2016 7:11 am
Forum: Wireless Networking
Topic: CAP upgrade from Capsman??
Replies: 1
Views: 2164

CAP upgrade from Capsman??

Hi! Have built a Capsman controller and added 30 CAPS all is great! The problem is with update - the option in winbox- UPGRADE in Capsman dont work! There is some secret or it doesnt work (yet)?
I run 3.7,,, on Capsman and 3.5.... on CAPS?! Caps ar not all the same model!
Some ideas?? some script?
by OnixJonix
Tue Aug 23, 2016 9:51 am
Forum: General
Topic: Using RB260GSP to power up DynaDish5 with POE
Replies: 4
Views: 696

Re: Using RB260GSP to power up DynaDish5 with POE

No problem at all I using on two places 260GSP powering DynDish it is working for I while. Of course on 260GSP is connected more device on frist one 2xBaseBox and LHG5 on second plus two more 911ac it is workiign no rpoblem at all after firmware 1.16. If you buy 260GSP update to 1.16 or new version...
by OnixJonix
Mon Aug 22, 2016 10:18 am
Forum: General
Topic: Using RB260GSP to power up DynaDish5 with POE
Replies: 4
Views: 696

Re: Using RB260GSP to power up DynaDish5 with POE

Oh! What have i looked up!! Realy its 1A so it means with 24v - i can power up 24Watts! So it should go smooth! Still someone tried?
by OnixJonix
Fri Aug 19, 2016 11:57 am
Forum: General
Topic: Using RB260GSP to power up DynaDish5 with POE
Replies: 4
Views: 696

Using RB260GSP to power up DynaDish5 with POE

Hi! My goal is using RB260GSP switch and using its built in POE-out ports to run DynaDish5! Question is - it will work? By specification i can read that DynaDish5 need 16W, the RB260GSP on each port provides only 500mA! RB260GSP is capable work with voltage 8-30V so by calculations with standard 24v...
by OnixJonix
Fri May 13, 2016 8:34 am
Forum: General
Topic: VLANS with Bridge
Replies: 12
Views: 1113

Re: VLANS with Bridge

Do the routers 1 and 2 have ethernet switch chips in them? It looks like you're using routers 1 and 2 more as switches than as routers, so perhaps you should build the vlans in the switches directly - it would give more performance. I built some multi-vlan access point Mikrotiks once (back before t...
by OnixJonix
Thu May 12, 2016 10:00 pm
Forum: General
Topic: VLANS with Bridge
Replies: 12
Views: 1113

Re: VLANS with Bridge

Well, you could let two ports on Router1 be switched ports - e.g. set ether2 master=ether1, and then connect the trunks to ether1 and ether2 This way, traffic from Main -> Router2 will just switch through Router1 at wire speed, and none of the VLAN stuff will be interfered with. You'll need to remo...
by OnixJonix
Thu May 12, 2016 9:36 pm
Forum: General
Topic: VLANS with Bridge
Replies: 12
Views: 1113

Re: VLANS with Bridge

Do the routers 1 and 2 have ethernet switch chips in them? It looks like you're using routers 1 and 2 more as switches than as routers, so perhaps you should build the vlans in the switches directly - it would give more performance. I built some multi-vlan access point Mikrotiks once (back before t...
by OnixJonix
Wed May 11, 2016 2:09 pm
Forum: General
Topic: VLANS with Bridge
Replies: 12
Views: 1113

Re: VLANS with Bridge

Your configuration looks good, to understand the problem, can you post your configuration of the 3 routers? Another question, the trunk port and access ports is working fine at Router 1? 1. If i connect ROUTER2 to MAIN router directly then everything is working fine! 2. Access ports work fine on Ro...
by OnixJonix
Wed May 11, 2016 10:36 am
Forum: General
Topic: VLANS with Bridge
Replies: 12
Views: 1113

VLANS with Bridge

Hi! Problem with VLAN in bridging mode! Cant passthrue vlan to next router! Example: main router - router1 - router 2 Problem - with router2 - cant give out access ports and passthrue both vlans to next router! Mikrotik_to_mikrotik_VLANS.png my router 2 configuration i think is also OK! Maybe someon...
by OnixJonix
Mon Dec 14, 2015 11:32 am
Forum: Beginner Basics
Topic: Cant block IP!
Replies: 3
Views: 946

Re: Cant block IP!

Real problem! ~40% off my traffic is the packets from 129.0.0.88 and i cant block them! The packets is incorrect or out of order!
Please help me!
And how it is possible - then firewall cant detect and block IP?!??!?!
by OnixJonix
Mon Dec 14, 2015 9:27 am
Forum: Beginner Basics
Topic: Cant block IP!
Replies: 3
Views: 946

Cant block IP!

Mistic! I have using mikrotik for a long time, and i think i know how to block IP, but this is stange! I capture packets from PACKET SNIFFER ir my router and find out some strange IP what i want to block! I block ip by firewall - did on INPUT, did on Forward! Put the rule on top of all! Nothing on m...
by OnixJonix
Sun Dec 13, 2015 9:15 pm
Forum: Beginner Basics
Topic: Mangle Queue tree and simple queue
Replies: 3
Views: 1838

Re: Mangle Queue tree and simple queue

Be aware of lot of CPU usage! Simple queues not necessary if you use right Queue tree rules! Its not the right method anymore to limit user by Mbps! Better is to QoS with mangle and queue tree rules to use traffic in right dirrection, but if bandwidth is open - let them use! my opinion!
by OnixJonix
Wed Nov 11, 2015 9:37 am
Forum: General
Topic: Stuck with RB750 Switching VLANs!
Replies: 11
Views: 2071

Re: Stuck with RB750 Switching VLANs!

huntah - all work just fine! Thanks man! Port you want make a HYBRID- for example port 2 with UNtagged VLAN ID 88, and Tagged VLAN 200 and VLAN 300 /interface ethernet switch port set 2 default-vlan-id=88 vlan-header=always-strip vlan-mode=secure /interface ethernet switch vlan add independent-learn...
by OnixJonix
Mon Nov 09, 2015 2:22 pm
Forum: General
Topic: Stuck with RB750 Switching VLANs!
Replies: 11
Views: 2071

Re: Stuck with RB750 Switching VLANs!

I asked this question, because in one of MUM presentation (page 34) there is sad that on these switches cant make HYBRID ports, but i cant see it in documentation... so i hope someone make it clear!
link to presentation:
http://mum.mikrotik.com/presentations/I ... nowski.pdf
by OnixJonix
Thu Nov 05, 2015 4:31 pm
Forum: General
Topic: Hybrid port on RB750????
Replies: 1
Views: 652

Hybrid port on RB750????

Can i make Hybrid port on RB750 with port SWITCHING? I need connect RB to UNIFI AP.
I need to make 3 different SSID with different VLANS and one manegment network without VLAN! So bassicly i need that my ether2 have - VLAN-200, Vlan300 - as tagged and Vlan400 as unntaged
by OnixJonix
Thu Nov 05, 2015 4:23 pm
Forum: General
Topic: Stuck with RB750 Switching VLANs!
Replies: 11
Views: 2071

Re: Stuck with RB750 Switching VLANs!

I have one mistake in sheme!
So the problem as i see is Hybrid port! I need from router 1 to AP - where there is 4 SSID each with different VLAN, but managment network is UNTTAGED! So if i understand correct this is HYBRID port and this switch cant do it?
by OnixJonix
Thu Nov 05, 2015 3:17 pm
Forum: General
Topic: Stuck with RB750 Switching VLANs!
Replies: 11
Views: 2071

Re: Stuck with RB750 Switching VLANs!

Sorry, but dont work this way!
As i understand if i want ACCESS port i make on PORT - AlwaysStrip? And thats all? Or there is some other trick?
by OnixJonix
Thu Oct 29, 2015 10:03 am
Forum: General
Topic: Stuck with RB750 Switching VLANs!
Replies: 11
Views: 2071

Re: Stuck with RB750 Switching VLANs!

Please sombody?? Why there are no documentation! If it is fully managed switch then please solve this simple task!
by OnixJonix
Wed Oct 28, 2015 3:14 pm
Forum: General
Topic: Stuck with RB750 Switching VLANs!
Replies: 11
Views: 2071

Stuck with RB750 Switching VLANs!

In the manual (http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Port_Switching) there is shown only example of incoming one tagged traffic then leaving only unntaged! I can't figure out how to forward tagged vlans? For example (see attached image) 750switching_problem.jpg Dont want to make ...
by OnixJonix
Fri Aug 21, 2015 9:27 am
Forum: General
Topic: how can I Block video (not webpage) ?
Replies: 2
Views: 2306

Re: how can I Block video (not webpage) ?

Webproxy works only on HTTP - Youtube for example ir HTTPS! Encrypted traffic cant be filtered with webproxy! You can try to find L7 filter! can try mangle the packets and when the connection reaches some limit - for example 8MB then you can assume that is some streaming! Of course it can be also so...
by OnixJonix
Wed Apr 15, 2015 9:34 am
Forum: Scripting
Topic: script for only e.g. facebook
Replies: 3
Views: 813

Re: script for only e.g. facebook

Maybe you could use an access rule with the web proxy which is transparently applied only for your "certain group of users" however you decide to identify them?

http://wiki.mikrotik.com/wiki/Manual:IP/Proxy
Proxy cant take care or SSL, so all HTTPS pages cant filter with proxy!
by OnixJonix
Thu Apr 09, 2015 4:11 pm
Forum: General
Topic: Connect two routers in lan to use one DNS and AD!
Replies: 3
Views: 591

Re: Connect two routers in lan to use one DNS and AD!

Great! It worked thanks for reply!
by OnixJonix
Thu Apr 09, 2015 11:47 am
Forum: General
Topic: Connect two routers in lan to use one DNS and AD!
Replies: 3
Views: 591

Connect two routers in lan to use one DNS and AD!

Hi!
Stuck in maybe simple problem! How to connect two routers with different WAN, simple need to use the same domain (DNS and AD server)! Look at sheme below! Thanks!
2routers.png
by OnixJonix
Tue Dec 23, 2014 11:52 am
Forum: General
Topic: Interface Bounding vs Switch port Trunk in CRS swtich!
Replies: 0
Views: 402

Interface Bounding vs Switch port Trunk in CRS swtich!

Hi! I need to use Link aggregation (Bouding) between 1100AHX2 and three CRS125! So i need links between: 1100AHx2-3,4port to CRS(1)-1,2port 1100AHx2-5,6port to CRS(2)-1,2port 1100AHx2-7,8port to CRS(3)-1,2port In CRS switch options i have alos TRUNK so what is the best choise and the main difference...
by OnixJonix
Thu Dec 11, 2014 9:33 pm
Forum: Beginner Basics
Topic: Problem with VPN and local computers
Replies: 1
Views: 518

Re: Problem with VPN and local computers

Try on vpn internal interface set proxy-arp! Without it arp dont work so cant get ip to ping between interfaces!
by OnixJonix
Thu Oct 02, 2014 4:51 pm
Forum: General
Topic: VLANs over Bonding interfaces?
Replies: 4
Views: 9472

Re: VLANs over Bonding interfaces?

But if i have more than one Bounding interface where i need to run same Vlans? Can i then add both boundings to bridge? Or what? Thanks!
by OnixJonix
Fri Feb 28, 2014 1:43 pm
Forum: General
Topic: PPTP user how to use share printer of LAN PC
Replies: 5
Views: 1197

Re: PPTP user how to use share printer of LAN PC

Make firewall rulle from pptp subnet to print server! Make in both ways - to printserver and from printserver!
by OnixJonix
Fri Feb 28, 2014 11:22 am
Forum: General
Topic: Idea to connect two (2) mikrotik routers- still one LAN
Replies: 3
Views: 826

Re: Idea to connect two (2) mikrotik routers- still one LAN

I want to divide jobs! Next week i recieve 2peaces of 1100AHx2 so i have recourse! But my aim is to divide jobs - one for wifi, second for wired! Becouse my wifi infrastructure have completly diffeent queues and access to my intranet recourses!
by OnixJonix
Thu Feb 27, 2014 4:40 pm
Forum: General
Topic: Idea to connect two (2) mikrotik routers- still one LAN
Replies: 3
Views: 826

Idea to connect two (2) mikrotik routers- still one LAN

Im confused! I need to extend my network and want use two mikrotik routers, becouse for one device is too many work (load -80-100%) - i want that my wifi control (radius, traffic shaping, firewall) works on other router, but rest of my network works with wired client! Suggest the methods that i can ...
by OnixJonix
Thu Oct 19, 2006 2:46 pm
Forum: General
Topic: Block url (IP) but still can acess changing PROXY in Browser
Replies: 5
Views: 1780

I'm sure that's just the wrong URL. DHCP has nothing to do with that ;)

Try here: http://www.mikrotik.com/docs/ros/2.9/ip ... ent#7.53.7.

Best regards,
Christian Meis
Thanks, but seems i need to gether more information, befor i can understand this freaky manual!!
by OnixJonix
Thu Oct 19, 2006 2:24 pm
Forum: General
Topic: Block url (IP) but still can acess changing PROXY in Browser
Replies: 5
Views: 1780

You can setup transparent-proxy to redirect all HTTP requests to the router proxy,
http://www.mikrotik.com/docs/ros/2.9/ip/dhcp
For what purpose is DHCP in mean with this transparent-proxy??? Or you made mistake with url????
by OnixJonix
Thu Oct 19, 2006 1:45 pm
Forum: General
Topic: Block url (IP) but still can acess changing PROXY in Browser
Replies: 5
Views: 1780

Block url (IP) but still can acess changing PROXY in Browser

Hello!!
Have a big problem- i block URL (IP) but user change Proxy server in Browser options and by-pass my block!! I can't block all Proxy, becouse they are too many?? There is someone who can help me with that?
Thanks!!!