@Bigfoot

can you post your config with the capsman?
Iam not not familiar with scripting , mayby a stupid questin but is this one script ?
I want to use a script like this but a want to change the key 2 times a year is this also posible ?

thanks you in advance

Last week i tried to upgrade my routers from 6.27 to 6.29.1, after this upgrade my rb2011uias-2hnd-in was bad accessible. my winbox disconnects may times. Also Eth6 port was blinking en even when i shutting the port it was stil blinking after 1 min.In the log there was continuously the text there is...

for a gast network I make a virtual ap in Capsman2 a add the network 10.0.0.1 by a new dhcp server This works fine til iam shut one of my wlan interfaces when enable the Virtual ap interface have a new name like wlan1 wlan2 evry time there is a new shut it change the result of this is that the dhcp ...

I finally found the problem, after uninstalling the hotpot packge it works fine :( Is this a bug ? is it not posible to use hotspot manager and capsman together ? there is one more thing when i set my channel on 40 Mhz i get the message unsuported channel :( I tried all settings but it's inposible t...

i use a layer 2 connection mac based as far i know, how can configure a layer 3 conection ?
The interface is doing the discover automatically, and in the log i see join mac xxxxx

is this a known issue ? and wil it be solved in v2?

Hi do you already solv this? i have the same problem

I run Capsman v1 on my rb2011uas-2hnd-in i have connected RBcAp2n this works fine. I also try to add the wireles interface from rb2011uas-2hnd-in. When i do this i see the folowing : first the cap join but the status is dtlsetup after 20 sec i see in my log some like teardown cap1 enz And then the c...

hello, I hope that any body can help me with the hairpin. I added the following rules. It's posible to reach the ip cameara from inside with my public ip but the connetion is verry slow i only can open the login screen. on the local side it works perfect, from another public ip it works also fine. i...

interface wireless security-profiles set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods="" \ management-protection=allowed wpa-pre-shared-key=xxxxxxxx wpa2-pre-shared-key=\ xxxxxxxx add authentication-types=wpa-psk,wpa2-psk eap-methods="" group-ciphers=tki...

I tried, but unfortunately this does not work...

I have just purchased a mikrotic RB2011UiAS-2HnD-IN, to configure the Wi-Fi network is not without problems. If I go without security connect it works well, once I configure a profile I can not connect. in the logs i read unicast exchange timeout. it's driving me crazy i already google on this log a...