Community discussions

MikroTik App

Search found 11 matches

by ngnr
Mon Jan 12, 2015 11:58 pm
Forum: Beginner Basics
Topic: Migrate from RB 450g to RB 1100ah
Replies: 2
Views: 786

Re: Migrate from RB 450g to RB 1100ah

Go to the log and check if it stopped importing because a line failed due to hardware differences. You'll have to fix the line and reset the unit and start all over again. There might be many fault lines but keep fixing them until the scripts ends with success. I believe there might be a better way ...
by ngnr
Sun Jan 11, 2015 9:52 pm
Forum: RouterBOARD hardware
Topic: Netbox 5 is it bricked?
Replies: 5
Views: 1345

Re: Netbox 5 is it bricked?

Try NETINSTALL.

http://wiki.mikrotik.com/wiki/Manual:Netinstall


Sent from my iPhone using Tapatalk
by ngnr
Sun Jan 11, 2015 7:59 pm
Forum: Beginner Basics
Topic: Cannot get VPN working
Replies: 8
Views: 2132

Re: Cannot get VPN working

Does your Mkt get a public IP from the cisco modem? Othewise L2TP/IPsec server doesn't work behind a NAT. Clients can be behind a NAT but not the server.


Sent from my iPhone using Tapatalk
by ngnr
Tue Jan 06, 2015 12:09 pm
Forum: Beginner Basics
Topic: Simple Queue for 2 subnet
Replies: 2
Views: 1546

Re: Simple Queue for 2 subnet

If you simply give higher priority to one of the targets you can end up with your 192.168.81.0/24 using all your bandwidth leaving your other subnet without any. The way I would prioritize is by defining 2 simple queues one for each target subnet. Allow max-limit 10M/20M on both queues so both subne...
by ngnr
Tue Jan 06, 2015 1:29 am
Forum: General
Topic: IP Cloud
Replies: 113
Views: 72921

Re: IP Cloud

I was under the impression that IP Cloud was just a dynamic DNS built into Mkt devices. Shouldn't the source address of the connection be the device IP?
by ngnr
Tue Jan 06, 2015 12:50 am
Forum: Forwarding Protocols
Topic: GRE tunnel
Replies: 6
Views: 2048

Re: GRE tunnel

Aren't you missing a default (0.0.0.0/0) gateway in the routes for R2?
by ngnr
Mon Jan 05, 2015 6:18 pm
Forum: Wireless Networking
Topic: SSID Problem
Replies: 16
Views: 2548

Re: SSID Problem

It shouldn't work since it's outside the standard but considering that there are other users connected I would suggest instead of typing the SSID go to the scan list on the wireless interface. Search for the ssid and click connect. Let's see if the mkt does some sort of truncate and allows you to co...
by ngnr
Sat Jan 03, 2015 7:07 pm
Forum: General
Topic: An Official Winbox for Macs
Replies: 3
Views: 1964

Re: An Official Winbox for Macs

As a mac user that would be great, but let's face it, I don't think that is a priority for Mikrotik right now. However you don't have to keep running your mac without GateKeeper activated. You can authorize individual apps to be run without been signed by the developer. While holding the Alt key rig...
by ngnr
Sat Jan 03, 2015 1:28 am
Forum: RouterBOARD hardware
Topic: cAP 2n not making any sound
Replies: 0
Views: 439

cAP 2n not making any sound

Does anybody know if this board has a buzzer like the rest of them? I made sure that Silent Boot wasn't turned on. I've tried upgrading the unit to 6.24 with no backup and no defaults, upgrading the Routerboard firmware but it was already on latest one. Did NetInstall and had no success with any of ...
by ngnr
Fri Jan 02, 2015 11:48 pm
Forum: Beginner Basics
Topic: Bandwidth management per IP / MAC & Torrent sites block
Replies: 7
Views: 1922

Re: Bandwidth management per IP / MAC & Torrent sites block

You can do detailed firewall on bridge but it is very resource consuming. Do it on the router as it will be more efficient. Use bridge firewall only when it should restrict traffic between bridge members. Are you sure about that? From the specs sheet from routerboard.com on the RB951G-2HnD seems to...
by ngnr
Fri Jan 02, 2015 10:45 pm
Forum: Beginner Basics
Topic: RB2011 factory reset
Replies: 6
Views: 9791

Re: RB2011 factory reset

From my experience using WINBOX on a Macintosh I've found that when I need to connect with a factory-reset unit is best to put my computer IP config using DHCP. Obviously it can't find any and it will autoassign an IP address in the form of X.X.X.X 255.0.0.0 . With this address set I can connect wit...