/tool bandwidth-test address=XXXXX protocol=tcp direction=both duration=3s user=btest password=btest do={ :if ($status="done testing") do={ . . . } } i try to test /tool bandwidth-test address=XXXXX protocol=tcp direction=both duration=3s user=btest password=btest in my terminal on winbox ...

please solve this. i must use the-dude on webbase for my customer
ros 6.42.6

hi all i'm thailand sorry for english please help me.. i need to use RADIUS of mikrotik(User Manager) for authentication EAP(802.1x) Method it can possible ? User Manager can support it? i no need 3rd party RADIUS eg.FreeRADIUS, MS-IAS, Other.. because i want Mikrotik Router be central controller th...

hi all i'm thailand sorry for english please help me.. i need to use RADIUS of mikrotik(User Manager) for authentication EAP(802.1x) Method it can possible ? User Manager can support it? i no need 3rd party RADIUS eg.FreeRADIUS, MS-IAS, Other.. because i want Mikrotik Router be central controller th...

hi i'm mikrotik mania. :lol: :lol: i need more option for netwatch tool 1.select interface :: can select interface to ping check. by default it work on default route 2.delay on startup :: can fill time-value by sec to process delay after router boot finish(wait for internet connect) thank you :D

hi mikrotik wireless solution it can possible 1. can create multi ssid 2. can seperate profile per ssid 3. can bridge vlan on wireless 4. MT have dual-brand product eg.Groove, Basebox2+wifi-card 5ghz 5. you can roaming wireless with WDS+MESH Cisco is a big name doesn't mean that they're still the be...

[SXT]))))))))))))))))))))))))))))))))))*
---------------------------*(((((((([RB951]))))))))


SXT=directional antenna
RB951=omni antenna

SXT can talk to RB951
but
RB951 can't talk to SXT because
1.low TX-Power
2.no directional antenna

hi.
please remember wireless is "two-way communication"
RB951 made for home use it low tx-power

you can use SXT-Lite2 for indoor but i'm not sure match between SXT + RB951

sorry for english if u not understand

hi tomaskir

i have a question but if i have internet 3 line ? in your LB bandwidth based method
i must set in tool--> Traffic monitor ?
if it have 2 internet line ok i understand

but 3 internet line How should I set up?

10MB x 10MB x 10MB


Thank you

Hi all
i have a problem i connect internet by PPPoE-Client MAX Speed Download 13MB
problem if Internet peek until 13MB. "pppoe-out" it will freeze must reconnect
i want to limit it pppoe-out --> limit TX-10MB

who have a how to

thank you

thank you tomaskir

i try to contact you in facebook & email in article
i meet this topic in seartch by google keyword "mikrotik load balance bandwidth base tomas"

http://forum.mikrotik.com/viewtopic.php ... 33#p398323

Thank you nick3dos but not it i mean it is PCC not Bandwidth base

Hi ALL i reading your Load balance Bandwidth base Method(MUM_US12) http://mum.mikrotik.com/presentations/US12/tomas.pdf but i don't understand this i connect internet by PPPoe-Client(pppoe-out1,2,3) and I have to do anything at this stage ? thank you /ipfirewall address-list addaddress=1.1.1.0/24 li...

thank you bingo220 it work for me! i have this problem a long time(1year) i try to find key word "ISP Failover" and other but it not work for me this is script by me. It ok, but its has error. you do not funny :lol: :lol: :lol: :delay 10 :if ([/ping 110.164.252.223 interface=pppoe-out1 cou...

thank you bingo220 i has a same you problem it show "connect" but not internet i have 3 pppoe-client(same ISP)+PCC Loadbalance. i not understan your script header please describe me or give me full script script # Don't forget, if you've multiple ISPs # HostPingA and HostPingB # must have ...

thank all guy i'll try again and again

i try install mikrotik(6.19) x86 in Mini-ITX http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=728#spec but it show "no hard disk drive fond" and i try to install with USB Flash Drive & Harddisk(WD RED1TB) and SSD it not work. i swap install device usb & harddisk to try in ...

Mikrotik x86 Support Lan Card Realtek RTL8111G ?
i know it support 8111C but i not sure it will support 8111G
please help me

OK I searched and I understand

i'm very want

i use load balance 3 wan(pppoe-out) with pcc type
if 1 in 3 link down from ISP it will promblem to use internet

i try this it not work for me
http://wiki.mikrotik.com/wiki/Advanced_ ... _Scripting

please help me
sorry i'm fair english

function is good idea!!!