With low voltage poe there is a limit - 1A (1000mA) thru ethernet port/cable. If you power your power-box from another poe-out device, than this limit clearly apply to your case. Also I see that you have only 20.6 volts on poe-out-voltage. Do you use stock power adapter (24v @ 2.5A, you should see 2...

How do you power power-box pro? Poe-in or jack?

Did you wiped any old configuration (unchecked "Keep old configuration" checkbox in netinstall program) ?

I upgraded my Mikrotik Powerbox Pro to 6.42.1 due to the winbox security issue. I am not getting overload POE errors on a port that is connected to a Nanostation M2 Loco. Anyone else having this issue or can offer a fix? Poe-out logs where added quite recently (version 6.40) - maybe you had that pr...

I upgraded my Mikrotik Powerbox Pro to 6.42.1 due to the winbox security issue. I am not getting overload POE errors on a port that is connected to a Nanostation M2 Loco. Anyone else having this issue or can offer a fix?

Could you paste fragment of logs with poe errors? And poe configuration?

You mean the literal hEX PoE? https://mikrotik.com/product/RB960PGS Yes, but... If you power the hEX PoE with 24V, it only does passive PoE. If you power it with 48V, it only does 802.3af/at. So if I have two af/at devices (e.g., a wsAP ac lite and a cAP ac), and two passive PoE devices (e.g., an R...

Are all the patch-cables the same (All the pach cables "regular" or "cross-over")? I once had a problem with short-circuit "random-magic" caused by bad/incorrect patch cable. I tried different APs and even different poe-switch, but problem persisted because of that bad ...

According to DGS-1210 manual you can see total power consumed and power available in the switch interface interface ( ftp://ftp.dlinkla.com/pub/DGS-1210-20/DGS-1210%20Series_B1_Manual_v2.00(WW).pdf , pages 78-80). Can tell what you see when you connect 8 wap-ac devices? How much power is consumed an...

Hi, Is it possible to switch on or off the Poe with regard of the clock? I.e. I would like it to start at 7am and shut off at 1am every day. First you need to create two scripts - one to switch on poe-out on desired ethernet port and another to switch it off: /system script add name=ether5_poe_out_...

First Configure your network so, that "regular internet" from LAN4 works (PC that is connected DEV_3) must be able to reach internet). Tip - leave LAN3 cable and IPTV cable unconnected while you do this. Then use EoIP (Interfaces -> EoIP Tunnel) to transport IPTV packets on top of this &qu...

note: RB is CC1036 12 4s and OS ver: 6.5

Hi,
cloud features appeared on version 6.14.
BR

hi to everyone.
can someone explain me how to make my mikrotik to be accessed from everywhere ??
Thanks.
Regards!

maybe you will find this instruction helpful: http://wiki.mikrotik.com/wiki/Manual:IP/Cloud

Sometimes the new IP address under menu IP/Addresses is the usual i see on http://www.whatsmyip.org

What address you see in IP Address (on your router) when it differs from address detected by http://www.whatsmyip.org ?