MikroTik

sakirozkan

60 Ghz link up down still

viewtopic.php?f=7&t=166370

sakirozkan

in 6.48beta48 (Testing)

*) w60g - general stability and performance improvements;

sakirozkan

We have same error in ptmp 60 ghz.

sakirozkan

Thanks i try it is working now.

sakirozkan

We have same error. We have CRS328-4C-20S-4S+ with same settings. It works with hw ofload but netpower doesn't

sakirozkan

For those of you who have disabled connection tracking or tweaked the connection tracking settings

Was it successful?

We use it, it works very well. Before these settings, ccr1072 will restart every one or two days

1072.JPG

1072 connection.JPG

sakirozkan

All of them pppoe

sakirozkan

Hi
we use rb4011 with level5. Licence 5 pppoe tunnel limit 500 but we use 507.

sakirozkan

I changed connection tracking times. And now uptime 15 days with 6.46.1 enabled: auto tcp-syn-sent-timeout: 2s tcp-syn-received-timeout: 2s tcp-established-timeout: 20s tcp-fin-wait-timeout: 5s tcp-close-wait-timeout: 5s tcp-last-ack-timeout: 5s tcp-time-wait-timeout: 5s tcp-close-timeout: 5s tcp-m...

sakirozkan

CRS318-1Fi-15Fr-2S-OUT

sakirozkan

I changed connection tracking times. And now uptime 15 days with 6.46.1 enabled: auto tcp-syn-sent-timeout: 2s tcp-syn-received-timeout: 2s tcp-established-timeout: 20s tcp-fin-wait-timeout: 5s tcp-close-wait-timeout: 5s tcp-last-ack-timeout: 5s tcp-time-wait-timeout: 5s tcp-close-timeout: 5s tcp-ma...

sakirozkan

So, could someone who has a working CCR1072 tell me what is wrong with the configuration on the video:

https://youtu.be/TAWQRaplnsM

+++

sakirozkan

I wrote it before. It is clear: Reboot min requirements: - connection-tracking activated - clear routing between two interfaces - 1G bidirectional traffic, 600B packets (each interface handles 1G in each direction) If the packets are bigger (1500B): - ~2,5G bidirectional traffic If the traffic is m...

sakirozkan

6.46.1 works good with vlan

sakirozkan

Is there any solution in winbox

sakirozkan

I try 6.43.8 and 6.45.3. When the traffic over 2100 mbps, graphing gives error. Picture shows the error.

sakirozkan

Only closing winbox port is enough? what about api and api-ssl ports? Disable any service you really really don't need. If you don't know what's it about, then you don't need it. Whatever remains (either winbox, https or ssh), protect with firewall as much as possible. Leave it open from only a few...

sakirozkan

Is there any development with new versions. I use 6.38.7 for this reason.
We want to upgrade 1072 for "Vulnerability exploiting the Winbox port" Anyone use 6.42 version with 1072 without watchdog reboot error.

sakirozkan

Only closing winbox port is enough?
what about api and api-ssl ports?

sakirozkan

I can't find expiration time change with coa in Mikrotik. Is there any way to change expiration time for sessions? There are this functions only; Mikrotik-Group Mikrotik-Recv-Limit Mikrotik-Xmit-Limit Mikrotik-Rate-Limit Ascend-Data-Rate (only if Mikrotik-Rate-Limit is not present) Ascend-XMit-Rate ...

sakirozkan

+ Thanks

sakirozkan

We have about 1800 lite 5 only 2 is do this. Reseller from Turkey.

sakirozkan

there isn't any script and when we reboot lite 5 comes with this script again. there isn'ta problem with reset configuration

sakirozkan

Hi i have two lite5. When i reboot the lite5,it runs the script. This is the log. How can i fix this error. 00:00:35 system,info router rebooted 00:00:41 script,info Starting_defconf_script_ 00:00:46 system,info device changed 00:00:46 system,info device changed 00:00:46 system,info device changed 0...

sakirozkan

is there any development of the watchdog reboot subject. What version are u using for solution. Our 1072 is reboots every 2 weeks.

sakirozkan

hi, at the moment we have 21 ccr1072 with 6.41rc44 all up with 17 days without issue. We do bgp + filtering + ospf. Nothing else. Try to upgrade to this release, if you still experience reboot you can exclude these service as reboot cause. We experienced reboots with cpu upgraded to 1200Mhz, at 100...

sakirozkan

Function for making srcnat commands easy

sakirozkan

You will find document in wiki

https://wiki.mikrotik.com/wiki/Manual:I ... _or_NAT444

In document there is a function for cgnat it works good.

sakirozkan

As long as you're within the 300m distance limitation, yes. No reason why it won't work.

Why 300 meters. With S+31DLC10D single mode sfp+ 10km. It is compatible

sakirozkan

Mikrotik says
*) ping - fixed ping getting stuck (after several thousands of ping attempts);

is fixed with this.but when update ccr1072 it gives watchdog error and reboot

viewtopic.php?f=7&t=78462

sakirozkan

The only difference between Ping and Trace (besides the TTL in the ICMP Type 8 outbound packet) is the return packet for the in-between hops. The return packet will be an ICMP type 11 for in between hops for a trace and an ICMP type 0 for the final hop. A ping will always have an ICMP type 0 as the...

sakirozkan

The only difference between Ping and Trace (besides the TTL in the ICMP Type 8 outbound packet) is the return packet for the in-between hops. The return packet will be an ICMP type 11 for in between hops for a trace and an ICMP type 0 for the final hop. A ping will always have an ICMP type 0 as the...

sakirozkan

Our ccr1072 6.38.7 same issue.
it works good for 25 days. now it can't send any ping all of ip's. But traceroute is working fine.
We send this to the mikrotik Ticket#2017091622000659

sakirozkan

I have the same issue on CCR 1072 - cpu is 1000 MHz - fw is 6.40.1
Any ideas?

I have the same issue with ccr1072. fw 6.40.1

sakirozkan

we want for wireless client second ssid. We make it with script. It works good. I think it is a good idea.
We control the registration if registraiton is down for 3 minutes, script change the ssid to spare access point.
Can u make this with second ssid.

sakirozkan

Not in winbox, The Dude client

sakirozkan

Hi

I'm using windows 10 with a 4K screen and The Dude Client isn't support 4k.

Can you please add 4k support?

thanks,

sakirozkan

the problem of our day is interference for wisps.
Is there any working for this problem. for example like this
https://community.ubnt.com/t5/Ubiquiti- ... 61693#M658

sakirozkan

Version 6.40rc21 has been released.
!) wireless - added Nv2 AP synchronization feature (for experimental use)(CLI only);

Visit this link in order to find out more about new wireless feature:
https://wiki.mikrotik.com/wiki/Manual:N ... ronization

Good experiment..

sakirozkan

We want to use dude client in 4k monitoring stytem. But the display is very poor.It is good 1080 view. is there any settings for 2k, 4k resolution?

sakirozkan

We are waiting background scan on Nv2 protocol. is there any work about this.

sakirozkan

Milestone for Mikrotik. One p2p link 80/20 works nice. Soon test p2m. What's throughput difference for dynamic and 80/20 ratio? It works as expected in our test setup, download and upload throughput are just restricted to desired ratio. If the throughput with dynamic ratio is 100mbps half duplex th...

sakirozkan

is there a test result for this function?

What's new in 6.40rc6 (2017-May-11 12:53):
*) wireless - added option to change "nv2-downlink-ratio" for nv2 protocol (CLI only);
*) wireless - added option to set "fixed-downlink" mode for nv2 protocol (CLI only);

sakirozkan

Sxt Lite5 Every reboot reset the configuration.it is boot mode flash-boot . But it should be nand-if-fail-then ethernet. I try netinstall it install then everything is same. is there any way to correct this problem.

sakirozkan

Station Roaming feature is available only for 802.11 wireless protocol. when we use background scan on nv2 and use station roaming. is there any work for nv2.

sakirozkan

Hi We want to use a script in wireless stations for "when we change ap frequency stations frequencies changes dynamicly" the scenario in one minute interval control the wireless registration if there is a wireless registration, it doesnt make something if there isn't registration, ...

sakirozkan

What is the mikrotik model

sakirozkan

Can u give me a suggestion for mpls. Which routerboards can i use? Rb450 , 850, 1100 vs.
And do u give a script for some tower router. How can i program ap's and ptp links? Thanks

sakirozkan

Hi i have a wisp company and i have 400 costumer now. In the centre i have ccr1036. Syslog server and dmasoft radius server. i have 5 pop tower. I use qrt and sextant for tower links. I use bridged network for links and towers. Which is the best one bridge network or route network for wisp? And how ...

sakirozkan

is there anysolution for this please help

sakirozkan

I have ccr1036. I configure pppoe server for my costumers. I have metro ethernet connection. I have a ip block. I use netmap function for my costumers to give ip address. add action=netmap chain=dstnat comment=Static ip dst-address=xxx.xxx.xxx.xxx\ in-interface=MetroEthernet to-addresses=yyy.yyy.yyy...

sakirozkan

www.netwifi.com.tr

The company started working july 2014 in Turkey. 400 customers, 100% Mikrotik Routers & Wireless CPE

sakirozkan

Thanks for your reply.

sakirozkan

I buy SXT G-5HPacD Sa. On the box writes SXT G-5HPacD Sa but in system routerboard menu writes SXT G-5HPacD. Is this true product?

Search found 54 matches