Community discussions

Search found 12 matches

by methou
Thu Nov 29, 2018 4:51 am
Forum: General
Topic: Working with EPON Sticks
Replies: 0
Views: 253

Working with EPON Sticks

I have a FTEN2115P1CUN-BC module and stick it into a hAP ac. The module was recognized, there were temperature, wavelength, negotiation, link state, etc readings, but can never receive anything, with or without auto-negotiation off. The ISP side requires only MAC-Address for authentication, so I've ...
by methou
Sun Feb 12, 2017 4:03 pm
Forum: General
Topic: Enslave a WiFi interface?
Replies: 0
Views: 310

Enslave a WiFi interface?

Hi, I have received a 962UiGS-5HacT2HnT and fairly happy with it. I'm using a PPPoE WAN with NAT settings, along with 70+ firewall rules and ~700 address lists. With master/slave configuration on wired LAN side, I can reach ISP promised bandwidth at ~ 260Mbps, but with Bridge mode, CPU hits 100% at ...
by methou
Fri Oct 07, 2016 6:21 am
Forum: General
Topic: RB450G slowly degrading
Replies: 3
Views: 631

Re: RB450G slowly degrading

Is the cpu maxed? What profile says during the capping traffic? Aren't you a part of dns amplification attack? Have you tried fasttrack? Yes, CPU is maxed at 800Mhz, firewall uses most of CPU at 40%, and I'm using fast-track no significant improvements. As for amplication attacks, no, I'm not openi...
by methou
Thu Sep 08, 2016 6:37 am
Forum: General
Topic: RB450G slowly degrading
Replies: 3
Views: 631

RB450G slowly degrading

I got an RB450G about a year ago, in last few month I've seen a huge decline in performance, though countermeasures were deployed but now still not able get full bandwidth. Without changes on configuration, with(-out) upgrading to release/rc version firmware. I was able to get 250Mbps+ back in June,...
by methou
Sat Mar 26, 2016 6:12 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 189816

Re: Cloud Hosted Router

I tried to upload the raw image to Google Compute Engine, it started but neither does ssh nor winbox working.
Do I need additional steps to make it work with those vps providers?
by methou
Wed Mar 09, 2016 9:09 am
Forum: General
Topic: [SNMP] Received all zero Timeticks on ifLastChange
Replies: 1
Views: 795

[SNMP] Received all zero Timeticks on ifLastChange

Hi, I'm a very confused from what I got from SNMP, which was supposed to be a non-zero positive value from ifLastChange, but they are all zeros. How should I fix this? Thanks! $ snmpwalk -Os -c internal -v 2c 192.168.88.1 ifLastChange ifLastChange.1 = Timeticks: (0) 0:00:00.00 ifLastChange.2 = Timet...
by methou
Wed Dec 09, 2015 11:12 am
Forum: General
Topic: Routing traffic to a remote server over pptp
Replies: 3
Views: 578

Re: Routing traffic to a remote server over pptp

Any thoughts? Thanks! I think you also need to add a /32 route for the ping target to the 'ladder' routing table so the pings will have a way to reach the ping target. I think that's why the 'ladder' default GW route isn't going active. I tried this but it doesn't work. As for the remote party's ro...
by methou
Wed Dec 09, 2015 10:47 am
Forum: General
Topic: ssh sessions not properly ended
Replies: 1
Views: 342

ssh sessions not properly ended

When issuing command from ssh, sessions should be automatically terminated when it's done. # try $ ssh 192.168.88.1 ":put \$pek1") # and then on the router side [qzhou@Anorien] > /user active print Flags: R - radius, M - by-romon # WHEN NAME ADDRESS VIA 0 dec/09/2015 01:37:58 admin 192.168.88.130 wi...
by methou
Tue Dec 08, 2015 3:23 pm
Forum: General
Topic: Routing traffic to a remote server over pptp
Replies: 3
Views: 578

Routing traffic to a remote server over pptp

Hi, I'm trying to route some of my traffic to a remote server in remote network, but it doesn't work properly. The Situation: A server with IP address 10.111.79.10 can be accessed from PPTP network 10.0.28.x/24(remote peer), the mikrotik router dials PPTP and gets an address 10.2.y.z/24(local peer)....
by methou
Wed Sep 30, 2015 5:26 am
Forum: Beginner Basics
Topic: Load Balancing
Replies: 7
Views: 1102

Re: Load Balancing

We typically use PCC as the others can sometimes have issues depending on what you are doing. You can certainly send certain traffic out a certain connection with policy routing.
But port forwarding with PCC is also very tricky, and sometimes doesn't work at all.
by methou
Thu Sep 24, 2015 6:55 am
Forum: General
Topic: Yet Another PCC/DST-NAT Problem
Replies: 0
Views: 618

Yet Another PCC/DST-NAT Problem

Issue: Port forwarding with not working. Setup: 4x PPPoE client VRRP'd to ISP, I have four public IPs, and willing to use each of them for separate purposes, they are all _Dynamic_. Any hints? the mangles: # sep/24/2015 3:47:37 by RouterOS 6.30.2 # software id = XXXX-XXXX # Flags: X - disabled, I - ...
by methou
Fri Aug 21, 2015 4:57 pm
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 48276

Re: 6.31 released

Just after 6.31: Aug/17/2015 14:31:58 system,error,critical router was rebooted without proper shutdown by watchdog timer Aug/17/2015 15:34:02 system,error,critical router was rebooted without proper shutdown Aug/18/2015 14:30:29 system,error,critical router was rebooted without proper shutdown Aug/...