Community discussions

Search found 18 matches

by Tet
Fri Aug 08, 2014 9:13 pm
Forum: General
Topic: v6.19rc for CCR tests needed!
Replies: 59
Views: 17510

Re: v6.19rc for CCR tests needed!

Confirm, rc6 quite buggy. Sent supout.
by Tet
Sat Jun 28, 2014 12:06 am
Forum: General
Topic: Simplest QoS setup for SIP VoIP - without max bandwidth
Replies: 8
Views: 2612

Re: Simplest QoS setup for SIP VoIP - without max bandwidth

Mikrotik should know exact available bandwidth to make queues work. I think, that's because if bandwidth unknown, it's impossible to cache packets correctly, because router don't know whether certain packet should be sent to port, or should be placed to queue. And some of packet will be definitely l...
by Tet
Fri Jun 27, 2014 8:39 pm
Forum: General
Topic: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.
Replies: 12
Views: 4296

Re: Mikrotik PoE + Gigabit never better than 100Mbit/s fdx.

We just purchased 10 poe-injectors, and because of this thread I forced to test it by myself. I have just connected my PC to RB951G over white-1-green-led-mikrotik-gigabit-poe-injector and run btest. And what the result? Solid 530Mbps send/530Mbit recieve with 100% RB CPU load! Рhew, seems all is ok...
by Tet
Fri Jun 27, 2014 3:30 pm
Forum: General
Topic: Office router with NAT and 2 ISPs - fail-over only
Replies: 4
Views: 1009

Re: Office router with NAT and 2 ISPs - fail-over only

src-nat follow AFTER routing decision. No need to decide in nat rules, which interface should transmit traffic - it's already decided. So, just make nat on both (WAN1 and WAN2) interfaces and that's all.
by Tet
Fri Jun 27, 2014 12:05 pm
Forum: Scripting
Topic: Content Filtering
Replies: 5
Views: 2593

Re: Content Filtering

You may try L7 content filtering
http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/L7

If this feature really works (I don't try it), it was your solution for http (not for https)
by Tet
Fri Jun 27, 2014 11:36 am
Forum: General
Topic: Office router with NAT and 2 ISPs - fail-over only
Replies: 4
Views: 1009

Re: Office router with NAT and 2 ISPs - fail-over only

If you don't like scripts, you may try recursive routing
http://wiki.mikrotik.com/wiki/Advanced_ ... _Scripting
by Tet
Fri Jun 27, 2014 11:16 am
Forum: Scripting
Topic: remove connection type unreplied
Replies: 4
Views: 1213

Re: remove connection type unreplied

What exactly connections you mean? May I guess - ICMP unreplied? If so, you should know - it's impossible to delete freezed unreplied ICMP-sessions till now.
by Tet
Fri Jun 27, 2014 12:44 am
Forum: Beginner Basics
Topic: What's wrong in this config? No LAN-2-WAN connection...
Replies: 11
Views: 1752

Re: What's wrong in this config? No LAN-2-WAN connection...

>What's wrong

Disable all firewall filter rules (for testing purposes) and ping from laptop to inet should start running.
by Tet
Thu Jun 26, 2014 11:50 pm
Forum: Beginner Basics
Topic: Mikrotik as firewall for white static address - not function
Replies: 7
Views: 1429

Re: Mikrotik as firewall for white static address - not func

It would be better, if you try at your own. Use wiki and google, where are lots of examples for you task. Here are complete working example of using bridge ip-firewall, which may help you to start. As you can see, nothing special (lan network - 7.7.7.0/24, internet gateway - 3.3.3.1/30, communicatio...
by Tet
Wed Jun 25, 2014 1:06 pm
Forum: Beginner Basics
Topic: How to convert working failover to load balancing?
Replies: 3
Views: 955

Re: How to convert working failover to load balancing?

In this case it will be hard to use ECMP, where you can simply write "/ip route add dst-address=0.0.0.0/0 gateway=1.1.1.1,2.2.2.2 check-gateway=ping" and that's all. But you could try PCC http://wiki.mikrotik.com/wiki/Manual:PCC It work stable on mikrotik, and fit to your conditions. In your script ...
by Tet
Mon Jun 23, 2014 11:01 pm
Forum: General
Topic: CCR1009 and subnets communication problem
Replies: 23
Views: 3462

Re: CCR1009 and subnets communication problem

try set up default gw pointing to CCR
by Tet
Mon Jun 23, 2014 12:51 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1013826

Re: CLOUD CORE ROUTER

ibm, I think you forgot to set default gateway as CCR in both of your PC.
by Tet
Mon Jun 23, 2014 12:42 pm
Forum: General
Topic: Moving configuration from 751G to 951G
Replies: 6
Views: 1488

Re: Moving configuration from 751G to 951G

Try access to brick through mac-address
by Tet
Sat Jun 21, 2014 1:48 pm
Forum: Beginner Basics
Topic: Trunk not working
Replies: 6
Views: 1207

Re: Trunk not working

Look at Example 2 in "Port Based VLAN"
http://wiki.mikrotik.com/wiki/Manual:CR ... Based_VLAN
by Tet
Sat Jun 21, 2014 12:55 am
Forum: Beginner Basics
Topic: Mikrotik as firewall for white static address - not function
Replies: 7
Views: 1429

Re: Mikrotik as firewall for white static address - not func

bridged and switched traffic not firewalled for some reason.
If you want filter bridged traff, enable it by command
/interface bridge settings set use-ip-firewall=yes
And for switched packets the only way to filter - by using switch rules
/interface ethernet switch rule 
by Tet
Fri Jun 20, 2014 9:24 pm
Forum: Beginner Basics
Topic: eth -> vrrp -> (vlan in bridge) = doesn't work
Replies: 3
Views: 1362

eth -> vrrp -> (vlan in bridge) = doesn't work

Greetings! CCR1016-12G, 6.15 Seems that my problem is simple, but i can't untersand, where I wrong. My config: /interface bridge add name=bridge-main /interface vrrp add interface=ether5 name=vrrp1 priority=250 v3-protocol=ipv6 vrid=4 /interface vlan add interface=vrrp1 name=vlan1 vlan-id=1 /interfa...