Community discussions

Search found 27 matches

by Mazutti
Thu Oct 26, 2017 3:32 pm
Forum: RouterBOARD hardware
Topic: Caution Mikrotik hEX PoE lite (RB750UPr2)
Replies: 8
Views: 2369

Re: Caution Mikrotik hEX PoE lite (RB750UPr2)

Hello all, does anyone know if this issue happens on hEX Gr3 as well? Had a usb drive stop responding after RouterOS and firmware upgrade/reboot, and it got me wondering if this is related.

Just as the user above described, I too don’t have the needed tools to test it.

Thanks in advance.
by Mazutti
Fri Oct 20, 2017 7:28 am
Forum: Announcements
Topic: v6.39.3 [bugfix] is released!
Replies: 47
Views: 15285

Re: v6.39.3 [bugfix] is released!

Hi everybody,

Just to report that I updated some CAPs (1 x wAP, 2 x mAP Lites, 2 x hAP AC Lites, 1 x hAP Lite), a RB2011UiAS-2HnD which mainly operates as L2TP-Client and CAPsMAN and a RB750Gr3, which operates mainly as CAPsMAN, L2TP-Server and Dude Server.

So far everything working as expected.
by Mazutti
Wed Jul 26, 2017 3:28 am
Forum: The Dude
Topic: RB260GS/RB260GSP SNMP monitoring on The Dude
Replies: 0
Views: 629

RB260GS/RB260GSP SNMP monitoring on The Dude

Greetings, I´m having trouble monitoring one RB260GS and one RB260GSP with The Dude, and would like to know if someone have this setup working. I read that these devices have weak processor on another topic, but the thing is that monitoring it through PRTG works fine. Tried increasing the probe inte...
by Mazutti
Fri Apr 21, 2017 2:55 pm
Forum: General
Topic: Protected RouterBOOT
Replies: 115
Views: 27810

Re: Protected RouterBOOT

It seems to me that you are following the procedure that only applies to very old devices, that need a special package. This package is no longer compatible with new RouterOS. We will soon make new packages. But you don't need this package. You can just enable this feature from the console: /system...
by Mazutti
Wed Apr 19, 2017 10:04 pm
Forum: General
Topic: Protected RouterBOOT
Replies: 115
Views: 27810

Re: Protected RouterBOOT

So, tried the step-by-step on two mipsbe RBs (mAP-2n and RB951G), and on both I get the error "FAILED to enable protected RouterBOOT: code 14". Tried to search for this error, but couldn´t get any results. Can anyone confirm if this error means these RBs are not supported (too old) or if that´s som...
by Mazutti
Sun Apr 16, 2017 7:42 pm
Forum: General
Topic: Protected RouterBOOT
Replies: 115
Views: 27810

Re: Protected RouterBOOT

So, tried the step-by-step on two mipsbe RBs (mAP-2n and RB951G), and on both I get the error "FAILED to enable protected RouterBOOT: code 14". Tried to search for this error, but couldn´t get any results. Can anyone confirm if this error means these RBs are not supported (too old) or if that´s some...
by Mazutti
Wed Mar 15, 2017 5:13 pm
Forum: Announcements
Topic: v6.38.5 [current]
Replies: 66
Views: 25432

Re: v6.38.5 [current]

Thanks for checking it out. Turns out that my primary server wasn't working, and for some reason it would not use the secondary.

Sorry for the false alarm.
by Mazutti
Wed Mar 15, 2017 6:00 am
Forum: Announcements
Topic: v6.38.5 [current]
Replies: 66
Views: 25432

Re: v6.38.5 [current]

Anyone else seeing NTP Client / Server problems? Can´t get my Mikrotiks to sync with public or mikrotik server, happening appearently since I upgraded to 6.38.5.

Anyway, happening on mmips, smips and mipsbe.
by Mazutti
Fri Mar 10, 2017 9:34 am
Forum: Announcements
Topic: v6.38.5 [current]
Replies: 66
Views: 25432

Re: v6.38.5 [current]

Upgraded hEX-Gr3, RB2011UiAS-2HnD, couple of hAP lites, couple of hAP AC lites, mAP-2n, RB951G, couple of mAP lites and a wAP. So far no problems. On hEX I've experienced something strange, but not only in this version, and sometimes PPPoE client would come up "dead" after upgrade, and I have to dis...
by Mazutti
Tue Jan 17, 2017 10:36 pm
Forum: Wireless Networking
Topic: SGI w/CapsMan
Replies: 17
Views: 1866

Re: SGI w/CapsMan

I didn't try updating one or the other. I updated CAP first, then the CAPsMAN, so they are both on the same version. Sorry...
No problem, anyway it's working, which is already great news. Thanks for the report.
by Mazutti
Tue Jan 17, 2017 9:58 pm
Forum: Wireless Networking
Topic: SGI w/CapsMan
Replies: 17
Views: 1866

Re: SGI w/CapsMan

SGI is now working with CAPSMAN!!
Before RC13:
BeforeRC13.PNG

After RC13:
AfterRC13.PNG
Was going to test it, but since you already did, just clarify it to me, you tested it with CAPsMAN and CAP on RC or just CAPsMAN?
by Mazutti
Tue Jan 10, 2017 3:07 pm
Forum: Wireless Networking
Topic: SGI w/CapsMan
Replies: 17
Views: 1866

Re: SGI w/CapsMan

Have also seen this and posted a while back, anyway got no response. My scenarios are below, and in none of them clients connect with SGI (makes no difference to leave SGI unchecked or marked as "all" on the CAPsMAN configuration). CAPsMAN (6.36.4): RB2011UiAS-2HnD CAPs (6.36.4 or 6.37.3): wAP, mAP-...
by Mazutti
Fri Jan 06, 2017 4:01 am
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 36826

Re: v6.38 [current] is released!

On RB750Gr3, where I have two PPPoE links to ISP, if I disable the secondary one, I can´t reenable it (tried through winbox, winbox "new terminal" and ssh). Log shows the initializing/connecting messages, but nothing else, and the interface won´t go up / get ip address. Log shows this entries just o...
by Mazutti
Wed Jan 04, 2017 3:01 pm
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 36826

Re: v6.38 [current] is released!

Just upgraded my shiny new HEX (RB750GR3) from v6.37.3 to latest stable v6.38. Unfortunately it did not come back. Instead it keeps beeping every 10sec. I am not using any fancy stuff just natting between an telco edge router and my internal network. A reset did not work. Will try a Netinstall in a...
by Mazutti
Wed Dec 28, 2016 4:33 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 74725

Re: v6.38rc [release candidate] is released

Thanks for the quick response. I've certainly disabled and enabled the rules during the troubleshooting, but not sure if tested without altering anything else. Will do first thing on the afternoon and send the supout to support anyway, since I'm not the first with similar issues, maybe it's not some...
by Mazutti
Wed Dec 28, 2016 3:55 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 74725

Re: v6.38rc [release candidate] is released

Anyone experiencing mangle problems on 6.38rc52? I'll elaborate: Problem started approximately one day after I replaced some configuration on a RB2011 to a hEX v3. Mangle is pretty simple, chain prerouting from a vlan with action mark routing. Today it stopped working and I can't seem to find the pr...
by Mazutti
Fri Oct 07, 2016 10:41 am
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 37833

Re: v6.37.1 [current] is released!

hAP AC Lite up for over 2d7h now without issues.
by Mazutti
Sun Sep 04, 2016 5:58 am
Forum: General
Topic: Using L2TP/IPSec VPN with iOS 10
Replies: 30
Views: 71312

Re: Using L2TP/IPSec VPN with iOS 10

How do you access internet through the Mikrotik? If it´s throug NAT masquerade, make sure that your VPN IP range is being masqueraded too.
by Mazutti
Fri Jul 08, 2016 11:49 am
Forum: RouterBOARD hardware
Topic: mAP Lite Ethernet susceptible to interference!
Replies: 44
Views: 7910

Re: mAP Lite Ethernet susceptible to interference!

One thing looks suspicious. Since approx. two to three weeks no online shop I could find has MAPlite on stock. But I remember they were available before this timeframe. So I assume they all sent back their MAPs to Mikrotik for inspection. Sounds possible, since mAP Lite have never been available he...
by Mazutti
Mon Jun 27, 2016 3:40 am
Forum: Wireless Networking
Topic: RB2011UiAS CAPsMAN dont add internal wlan and virtual ap
Replies: 2
Views: 736

Re: RB2011UiAS CAPsMAN dont add internal wlan and virtual ap

Yes, but that way your router is left vulnerable (all input and forward traffic will be accepted). Probably only thing that was preventing CAPsMAN to work, was that traffic from itself was not allowed on firewall. Try adding the below rule to the top of /ip firewall filter and re-enable the rules yo...
by Mazutti
Mon May 02, 2016 2:21 am
Forum: Beginner Basics
Topic: NewBee with RB1100AHX2
Replies: 4
Views: 821

Re: NewBee with RB1100AHX2

But no issue when I set it below 10M or choose any BW in the menu that which is all below 10M. Although bandwidth drop-down list shows only 10M max, you can set it to whatever value you like, in kbps. See wiki: http://wiki.mikrotik.com/wiki/Manual:Interface/Ethernet Let me know if I got your proble...
by Mazutti
Mon Apr 25, 2016 9:11 pm
Forum: Beginner Basics
Topic: Is it possible to restrict a VPN user to a certain IP address
Replies: 2
Views: 1690

Re: Is it possible to restrict a VPN user to a certain IP address

Have you tried this:

http://wiki.mikrotik.com/wiki/Manual:Interface/L2TP

Like it shows there, you can specify remote-address on /ppp secret, so that client always get the same IP.
by Mazutti
Mon Apr 25, 2016 8:50 pm
Forum: Beginner Basics
Topic: Can't connect between 2 subnet in 2 eth
Replies: 5
Views: 826

Re: Can't connect between 2 subnet in 2 eth

Hi every one ! I have 2 ethernet with - eth1 ip= 192.168.0.1/24 - eth2 ip =192.168.2.1/24 and cable form 2 ethenet put in to 2 othe switch. How to do for them see itself. Sorry for bad english If your router is gateway to both networks and firewall is not configured to drop connections between them...
by Mazutti
Thu Apr 21, 2016 8:29 am
Forum: General
Topic: mikrotik help with my router RB450g
Replies: 2
Views: 513

Re: mikrotik help with my router RB450g

mikrotik help with my router RB450g

Image

does not update the firmware
And it seems like you´re already on the latest firmware (Current and Upgrade are the same).
by Mazutti
Thu Apr 21, 2016 8:26 am
Forum: General
Topic: What SFP module do I need?
Replies: 6
Views: 915

Re: What SFP module do I need?

it says it has dual LC, so couldn't I use a LC to SC patch lead to connect to both ports 23 & 24 and that should work?
If the wavelenght used by your provider is the 1310nm (both TX/RX), and you´re within the 10km transceiver range, then yes, it should.
by Mazutti
Tue Jan 19, 2016 7:42 pm
Forum: Wireless Networking
Topic: CAPsMAN Access list problem
Replies: 0
Views: 644

CAPsMAN Access list problem

Hello everyone, So here´s a problem I´m struggling to solve, without success so far. I have a CAPsMAN (RB951G) that controls 3 CAPs (one been itself), and 4 SSIDs per CAP. The problem is, I cannot set an access list that blocks clients from connectin on only two of the SSIDs. What I want to achieve ...
by Mazutti
Thu Sep 10, 2015 2:48 pm
Forum: Announcements
Topic: v6.32.1 released
Replies: 76
Views: 18864

Re: v6.32.1 released

my RB450G has below warning, is it normal or bug? ether2-master-local excessive broadcasts/multicasts, probably a loop Snap1.jpg previous v6.30.4 doesnt have such problem. pls help to solve it. thanks Same here on RB2011UiAS-2HnD. Shows ether4 (which is switch 1 master port) probably has a loop, bu...