Hello all, does anyone know if this issue happens on hEX Gr3 as well? Had a usb drive stop responding after RouterOS and firmware upgrade/reboot, and it got me wondering if this is related.

Just as the user above described, I too don’t have the needed tools to test it.

Thanks in advance.

Hi everybody,

Just to report that I updated some CAPs (1 x wAP, 2 x mAP Lites, 2 x hAP AC Lites, 1 x hAP Lite), a RB2011UiAS-2HnD which mainly operates as L2TP-Client and CAPsMAN and a RB750Gr3, which operates mainly as CAPsMAN, L2TP-Server and Dude Server.

So far everything working as expected.

Greetings, I´m having trouble monitoring one RB260GS and one RB260GSP with The Dude, and would like to know if someone have this setup working. I read that these devices have weak processor on another topic, but the thing is that monitoring it through PRTG works fine. Tried increasing the probe inte...

It seems to me that you are following the procedure that only applies to very old devices, that need a special package. This package is no longer compatible with new RouterOS. We will soon make new packages. But you don't need this package. You can just enable this feature from the console: /system...

So, tried the step-by-step on two mipsbe RBs (mAP-2n and RB951G), and on both I get the error "FAILED to enable protected RouterBOOT: code 14". Tried to search for this error, but couldn´t get any results. Can anyone confirm if this error means these RBs are not supported (too old) or if ...

So, tried the step-by-step on two mipsbe RBs (mAP-2n and RB951G), and on both I get the error "FAILED to enable protected RouterBOOT: code 14". Tried to search for this error, but couldn´t get any results. Can anyone confirm if this error means these RBs are not supported (too old) or if t...

Thanks for checking it out. Turns out that my primary server wasn't working, and for some reason it would not use the secondary.

Sorry for the false alarm.

Anyone else seeing NTP Client / Server problems? Can´t get my Mikrotiks to sync with public or mikrotik server, happening appearently since I upgraded to 6.38.5.

Anyway, happening on mmips, smips and mipsbe.

Upgraded hEX-Gr3, RB2011UiAS-2HnD, couple of hAP lites, couple of hAP AC lites, mAP-2n, RB951G, couple of mAP lites and a wAP. So far no problems. On hEX I've experienced something strange, but not only in this version, and sometimes PPPoE client would come up "dead" after upgrade, and I h...

I didn't try updating one or the other. I updated CAP first, then the CAPsMAN, so they are both on the same version. Sorry...

No problem, anyway it's working, which is already great news. Thanks for the report.

SGI is now working with CAPSMAN!!
Before RC13:
BeforeRC13.PNG

After RC13:
AfterRC13.PNG

Was going to test it, but since you already did, just clarify it to me, you tested it with CAPsMAN and CAP on RC or just CAPsMAN?

Have also seen this and posted a while back, anyway got no response. My scenarios are below, and in none of them clients connect with SGI (makes no difference to leave SGI unchecked or marked as "all" on the CAPsMAN configuration). CAPsMAN (6.36.4): RB2011UiAS-2HnD CAPs (6.36.4 or 6.37.3):...

On RB750Gr3, where I have two PPPoE links to ISP, if I disable the secondary one, I can´t reenable it (tried through winbox, winbox "new terminal" and ssh). Log shows the initializing/connecting messages, but nothing else, and the interface won´t go up / get ip address. Log shows this entr...

Just upgraded my shiny new HEX (RB750GR3) from v6.37.3 to latest stable v6.38. Unfortunately it did not come back. Instead it keeps beeping every 10sec. I am not using any fancy stuff just natting between an telco edge router and my internal network. A reset did not work. Will try a Netinstall in a...

Thanks for the quick response. I've certainly disabled and enabled the rules during the troubleshooting, but not sure if tested without altering anything else. Will do first thing on the afternoon and send the supout to support anyway, since I'm not the first with similar issues, maybe it's not some...

Anyone experiencing mangle problems on 6.38rc52? I'll elaborate: Problem started approximately one day after I replaced some configuration on a RB2011 to a hEX v3. Mangle is pretty simple, chain prerouting from a vlan with action mark routing. Today it stopped working and I can't seem to find the pr...

hAP AC Lite up for over 2d7h now without issues.

How do you access internet through the Mikrotik? If it´s throug NAT masquerade, make sure that your VPN IP range is being masqueraded too.

One thing looks suspicious. Since approx. two to three weeks no online shop I could find has MAPlite on stock. But I remember they were available before this timeframe. So I assume they all sent back their MAPs to Mikrotik for inspection. Sounds possible, since mAP Lite have never been available he...

Yes, but that way your router is left vulnerable (all input and forward traffic will be accepted). Probably only thing that was preventing CAPsMAN to work, was that traffic from itself was not allowed on firewall. Try adding the below rule to the top of /ip firewall filter and re-enable the rules yo...

But no issue when I set it below 10M or choose any BW in the menu that which is all below 10M. Although bandwidth drop-down list shows only 10M max, you can set it to whatever value you like, in kbps. See wiki: http://wiki.mikrotik.com/wiki/Manual:Interface/Ethernet Let me know if I got your proble...

Have you tried this:

http://wiki.mikrotik.com/wiki/Manual:Interface/L2TP

Like it shows there, you can specify remote-address on /ppp secret, so that client always get the same IP.

Hi every one ! I have 2 ethernet with - eth1 ip= 192.168.0.1/24 - eth2 ip =192.168.2.1/24 and cable form 2 ethenet put in to 2 othe switch. How to do for them see itself. Sorry for bad english If your router is gateway to both networks and firewall is not configured to drop connections between them...

mikrotik help with my router RB450g



does not update the firmware

And it seems like you´re already on the latest firmware (Current and Upgrade are the same).

it says it has dual LC, so couldn't I use a LC to SC patch lead to connect to both ports 23 & 24 and that should work?

If the wavelenght used by your provider is the 1310nm (both TX/RX), and you´re within the 10km transceiver range, then yes, it should.

Hello everyone, So here´s a problem I´m struggling to solve, without success so far. I have a CAPsMAN (RB951G) that controls 3 CAPs (one been itself), and 4 SSIDs per CAP. The problem is, I cannot set an access list that blocks clients from connectin on only two of the SSIDs. What I want to achieve ...

my RB450G has below warning, is it normal or bug? ether2-master-local excessive broadcasts/multicasts, probably a loop Snap1.jpg previous v6.30.4 doesnt have such problem. pls help to solve it. thanks Same here on RB2011UiAS-2HnD. Shows ether4 (which is switch 1 master port) probably has a loop, bu...