MikroTik

romihg

Something like this should work.

romihg

https://mikrotik.com/product/RB951G-2HnD Note that G in the name. This one go 1000Mbps

romihg

Does your ISP provide IPv6? If it does ask them how you can get IPv6 on your devices.

I have same setup on 7.1.1 as on 6.x and it is working.

romihg

Does your ISP provide IPv6? If it does ask them how you can get IPv6 on your devices.

romihg

Hello Can not upgrade RBSXTsqG-5acD from 6.49.2 to 7.1.1 via System>Package >upgrade. I have only esential package on device. [admin@MikroTik AP] /system package> print Flags: X - disabled # NAME VERSION SCHEDULED 0 system 6.49.2 1 dhcp 6.49.2 2 wireless 6.49.2 3 security 6.49.2 And still is after r...

romihg

Is this USB or rj45 printer? If is rj45 than simply get mAP and bridge wireles and ethernet port and on wirles set staton mode. If is USB you need usb printer server with wireles capability. It is so easy https://mikrotik.com/product/RBmAP2nD USB printing is not supported on this device. USB is only...

romihg

https://mikrotik.com/product/wap_ac Fresh

romihg

https://mikrotik.com/calculator

Here you can play with diferent antenas

romihg

My english is not so good so i wiil try to explain my plain FTTH. I plug in my fibre direct in SFP in modem.No GPON interface in front of my modem. In our contry was deployed FTTH at first but then started GPON deployment beacuse of price.

SFP is BiDi 1310/1550

romihg

What is you PPPoE interface Actual MTU?
Anyway, take a look on this topic too: viewtopic.php?f=2&t=169757&p=832247#p831447

Thank you for right direction. MTU for IPv6 worked.

romihg

Connection to ISP is fibre. It is not GPON. It is plain FTTH.

romihg

I can not reach the Netflix if i have IPv6 enabled. Or on every 10th try i get netflix to work. I find the solution but i need translatin to Mikrotik talk. https://www.reddit.com/r/ipv6/comments/evv7r8/ipv6_and_netflix/ ----snip from reddit-------- MSS clamping of 1432, or interface MTU of 1508 with...

romihg

I can not reach the Netflix if i have IPv6 enabled. Or on every 10th try i get netflix to work. I find the solution but i need translatin to Mikrotik talk. https://www.reddit.com/r/ipv6/comments/evv7r8/ipv6_and_netflix/ ----snip from reddit-------- MSS clamping of 1432, or interface MTU of 1508 with...

romihg

Call your ISP if thy can put your ADSL modem in bridge mode. Then you put your username in password in Mikrotik . So the mikrotik can make connection to your ISP.

romihg

Did you try older Mac OS?

https://discussions.apple.com/thread/8508719
https://discussions.apple.com/thread/2170974

Mac problem on horizon

romihg

Where is the point to do that. If is wlan1 WAN side of the roter than is eth0 LAN side of router. Or do want to have bridge to local wireless hotspot?

romihg

https://mikrotik.com/product/RB953GS-5HnT-RP

https://wiki.mikrotik.com/wiki/Manual:P ... D_products

So the diference with your board is

R - MiniPCI or MINIPCIe slot
P - power injection with controller

romihg

In this shape?? Probably not

romihg

LoL

Questions on forum witch is network related and you go asking about monitors.

romihg

Moja konfiguracija na Siolu z omogočeno iptv. Iptv dela tako tudi dela lokalna mreža in internet na siol boxih Sorry guys for slovenian language. # jan/16/2020 13:03:12 by RouterOS 6.46.1 # software id = U9SD-JKHU # # model = RB4011iGS+5HacQ2HnD # serial number = 96890A689AF2 /interface bridge add a...

romihg

/interface vlan add interface=ether1 name="ether1 - VLAN 3999" vlan-id=3999 add interface=ether5 name="ether5 - VLAN 3999" vlan-id=3999 /interface bridge port add bridge=bridgeTV interface="ether1 - VLAN 3999" add bridge=bridgeTV interface="ether5 - VLAN 3999"...

romihg

Nekaj slovencev pa je na tem forumu

Translation of above sentence: Some slovenian guys are here on this forum.

romihg

First need all ISP give IPv6 to users. In our country all bigger ISP have enabled IPv6 for users. But some users are afraid of IPv6 beacuse they do not know anything about it. Firewalls are not much diferent for IPv6. But now you need take care of all computers on network not just router to do his j...

romihg

Any new good pics

romihg

Hi
I was geting 270M MAX on 350/40 link PPPOE. On just simple nating nothing else. Now i have RB4011 and i get full 350/40 speed. CPU on speedtest was onn 100% Never research on depth of this

romihg

Teredo is a transition technology that gives full IPv6 connectivity for IPv6-capable hosts that are on the IPv4 Internet but have no native connection to an IPv6 network. Unlike similar protocols such as 6to4, it can perform its function even from behind network address translation (NAT) devices suc...

romihg

First uninstall Teredo. When you have native IPv6 you do not need Teredo. And why do you have 2 IPv6 gateways ? About DNS IPv4 DNS can serve AAAA as well. Is Dlink client for your ISP and you want share IPv6 on your network?

Next time ask this questions on Dlink support not here.

romihg

If you google for google ipv6 dns Google Public DNS IP addresses The Google Public DNS IP addresses (IPv4) are as follows: 8.8.8.8 8.8.4.4 The Google Public DNS IPv6 addresses are as follows: 2001:4860:4860::8888 2001:4860:4860::8844 You can use either address as your primary or secondary DNS server.

romihg

RB2011UiAS-2HnD-IN are 2 versions. One is without POE on 10 port. https://d13z1xw8270sfc.cloudfront.net/resize/243678/router.jpg/250/360/0/?bg=FFFFFF And this one have POE https://www.balticnetworks.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/m/i/mikrotik-routerboard-rb2...

romihg

1. IPv6 > DHCPv6 client > Add new
- Interface ether1 (where my ONU is connected)
- Pool name "pool-ipv6"
- Pool prefix length: 64
- User Peer DNS, Add default route both checked[/code]

Instead of ether1 try pppoe interface. Not seperate one but this one you have.

romihg

In order to access router running this version by Winbox, please download v3.14rc Winbox loader from here:
https://www.mikrotik.com/download/share/winbox.exe

romihg

Do you pull or push antenna from enclosure?? You need to squeeze inside part and push out.

romihg

Reseting router with /system reset-configuration is the same as /system reset-configuration no-defaults option. So no defaults loaded on boot.

2011UiAS-2HnD with 6.41.9rc

romihg

Upgrade from 6.40 last rc to 6.41.3 my 2011UiAS-2HnD all leds on active interfaces are off, Except led on eth10 is on witch is POE Out and is active. Is this normal or something wrong with this.

Leds work on boot. But after router come in working state they switch off.

romihg

Upgrade from 6.40 last rc to 6.41.3 my 2011UiAS-2HnD all leds on active interfaces are off, Except led on eth10 is on witch is POE Out and is active. Is this normal or something wrong with this.

romihg

Link to wiki:https://wiki.mikrotik.com/wiki/Supporte ... B_Ethernet

romihg

https://wiki.mikrotik.com/wiki/Hairpin_NAT Look here.

romihg

This is why i have enabled IPv6 option on my routers. Always can connect via IPv6.

romihg

r2 > revision 2

romihg

If you have backup file on hand than you maybe retrive your password. https://www.mikrotikpasswordrecovery.net/ MikroTik Password Recovery Online Tool The website offers the simplest way to MikroTik password recovery. This software allows you to decrypt user passwords from your MikroTik backup files...

romihg

show tracert on your windows machine and route.

romihg

SXT Lite5 it has license 3 so this is no router only AP. Are you upgraded to level 4?

http://www.icafemenu.com/how-to-port-fo ... router.htm

romihg

It is possibile. But wont work. Try solder rom chip from mikrotik on Ubiquiti.

romihg

He is asking for CPE mode help. RB411 with wireles card recive signal from distance and send signal or Internet to his computer over lan cable.

romihg

Use android application Tik-app to connect to device on wireless connection. Tik-app is beta status so you must first enroll in.

http://forum.mikrotik.com/viewtopic.php?f=21&t=98407

Ethernet and wireless must be in bridge than you can connnect via ethernet.

romihg

I also lost wireless interface on upgrade from RouterOS 6.37 rc 5 to rc 12 and 15 is also missing. Try with downgrading fw 3.33 to 3.24. same result. This is on RB 2011UiAS-2HnD. On 2011UAS-2HnD wireless working normal with RouterOS 37 rc 12 and 15. Same firmware on both.

romihg

http://wlan.novagorica.eu/to269ke--hotspots.html It is not a WISP but free hotspots. Hotspots in Nova Gorica have long history as the first point was operational in 2003. First it started as an experiment in local students club but after that the network was expanded to other organization, bars and...

romihg

skuykend - Please send supout.rif file to support@mikrotik.com. Make sure that supout file is generated after you have experienced issue and fixed it with renew. http://wiki.mikrotik.com/wiki/Manual:Support_Output_File http://www.mikrotik.com/support.html Sent. [Ticket#2015110366000181] What is the...

romihg

Can't seem to get IPv6 DHCPv6 to work right. Keeps asking me for an "IA". The only way to get it to work is from the command line using the following string: ipv6 dhcp-c add interface=ether8 add-default-route=yes request=prefix pool-name=IPv6 Anyone else seeing this? -tp [admin@MikroTik] ...

romihg

Problem resolved in last software edition. Or version before. I do not know when but problem with duplicated DNS entries gone.

I know it is late answer, i found couple of nights before.

romihg

Uncheck Use Peer DNS in DHCPv6 client window and write it in manuali in DNS window. This is my solution.

Search found 51 matches