MikroTik

manish

After reading the document multiple times, I still don't understand how to make this work.

manish

Hello Experts, I am trying to establish bgp between client(v6) to router (v7) the routes gets injected in ospf but are not properly advertised. CPE: /routing bgp instance set default as=2 router-id=10.255.254.200 /routing bgp network add network=10.255.254.200/32 synchronize=no /routing bgp peer add...

manish

Thank you for sharing the link. I was able to get TE working with version 6, but it seems like version 7 requires a different configuration method. I was wondering if anyone has experience with this and could offer some helpful tips.

manish

Dear Experts, I am currently testing a portion of my network with version 7 due to the increasing prevalence of preinstalled routers with this software. However, I have encountered an issue with TE functionality. While I was able to create interfaces with TE in version 6 and successfully route traff...

manish

I wanted to test Xvlan between 2 routers, I set up the first one and it was fine, while setting up the second one, the router went offline, and would just keep on rebooting, i disabled the IP it was connecting to and the router stabilised, logged in and disabled the XVLAN, and it was back online, lo...

manish

I tried to upgrade couple of routers to test, and I see TE does not work, has anybody else managed to get it working? Thank you.

manish

Hi Sindy,

Thank you for all the help, this seem to have solved my issue, the Switch is back to 2-4% and traffic is going upstream.

Thank you once again for your time.

Have a nice weekend.

manish

Hi Sindy, I just removed VLAN 40, as i wanted to keep it simple, vlan 40 goes direct to an ethernet port. Which would be easy to manage. 30 and 31, cause of design of the OLT, traffic from device the CPE, 30 and VLAN 31 is if the customer uses their own router. but all that goes to PPPoE. As there i...

manish

Hi Sindy, Apologies for not being clear, I have tried to attach a simple diag, I have 3 OLT, connected to the switch. The old OLT were just delivering traffic without VLAN. The new one has VLAN for each service. I had port isolation, so Ether 1 and 2 would only see Ether 3 and 4, and not each other....

manish

I just realised one thing,

/interface bridge vlan
add bridge=BR1 vlan-ids=30,31,35 tagged=sfp-sfpplus1,ether1,ether2,ether3
add bridge=BR1 vlan-ids=40 tagged=sfp-sfpplus1,ether4

will ether 1 be able to talk to vlan 30? or it will come as vlan 30 on ether 1, 2 and 3?

manish

Thank you Sindy,

Should I also remove port isolation, in the switch. As when I was using Horizon, switch CPU was sky high! but after the VLAN it does not work well.

manish

same router 1036 8G 2+ having this issue. Anybody found solution?

manish

Hi Sindy,

Yes thats what I want, any way to do it without using the CPU.

manish

Thank you, yes the CSR is kind of already coming to its knees with just 200mb of traffic. I would have actually used port isolation if it was port, but this being VLAN i cannot use that. I want to test the VLAN under bridge, is there any example related to what I want, I tried looking but nothing si...

manish

Hello, Apologies if this has been asked before, I tried to search but could not find something similar, I am using CRS326-24G-2S+, using a switch chip to isolate the ports, but since I added some vlan to 10G port, the CPU has gone high. Is there a way I can pass traffic via switch and not CPU. 10G p...

manish

Hello Experts, I have a PPPoE Server, using Radius to connect, how can I bypass icmp, I have tried to mangle and bypass but does not seem to work. /ip firewall mangle add action=mark-connection chain=prerouting new-connection-mark=icmp-con passthrough=yes protocol=icmp add action=mark-connection cha...

manish

Hi Tom, Something weird happened yesterday, I was testing a link with just 50/50 for like 10 seconds, I did the test 2 times and the second time I did I could not stop the test, I rebooted the router like so many times but when ever it came online it would start to receive that traffic, I had to blo...

manish

Thank you for your response, there are many subnets mangle will mess up I think as I will eventually forget a static route :)

Do you have any link for this?

Is there possibility I only mangle one rule?

manish

Hello, I have configured single OSPF network with a default route pointing to the internet which is via Ether1, how can I route a single range, lets say 192.168.1.0/24 through another interface ether 2? Is there a way to have default gateway routed per subnet? everything will go through our standard...

manish

I have managed to setup the server along with links, but I have noticed every time I open the map some links are not right, i have to manually select the interface, what could this be?

Thank you.

manish

Thank you, looking at this example, https://wiki.mikrotik.com/wiki/Manual:Q ... Q_Examples which distributes equal bandwidth, what I want is to allocate total Bandwidth like 5mb and that subnet or group should not exceed the 5mb, I don't want to do equal distribution. How can I do that.

manish

Thank you for helping me understand this, I have another question when limiting users by IP address, would it be equal bandwidth to all users or they can use as much as they want as long as they do not exceed the total allocated. Thank you

manish

I had enabled Horizon on the switch and this was taking a toll, I removed that and the CPU went normal.

manish

Hello,

I just noticed a few of my switches are running at 60-70% CPU, there is nothing much apart from the IGMP Snooping, could this be the cause? The ports are all on Hardware. Traffic is around 300-400Mbps.

Thank you.

manish

Hi Again, I just want to control bandwidth if possible from the router, I can use address list for this, but when I put these rules, I can only control upload traffic and not incoming traffic, I have tried to look around web and could not find any good examples on what I want to do. Would it be poss...

manish

Thank you so much for the explanation, with my scenario I am not sure how to control Bandwidth using the router, I am using OSPF, so there are chances some interfaces will change from incoming to outgoing when links flap, like I do not have a particular interface as WAN in a router. It is part of OS...

manish

Thank you so much for the explanation, with my scenario I am not sure how to control Bandwidth using the router, I am using OSPF, so there are chances some interfaces will change from incoming to outgoing when links flap, like I do not have a particular interface as WAN in a router. It is part of OS...

manish

Hello, I am trying to control Bandwidth based on IP, the best was was to use Queue Trees, I can control outgoing bw but cannot do incoming, if I select New connections, should I also select established? Will it not double restrict? The traffic i want to control is from one port. /ip firewall mangle ...

manish

10G Links,

We had few 10G links with CCR, after upgrading all these went down randomly, SFP+ port 2, and they would not come back up, tried to roll back but no luck, changed SFP, finally did Hard reboot and the port came up.

manish

Hello

I have a cache server, infront of mikrotik router, is it possible to bypass the traffic which would not count against the bandwidth limits.

pass cache pages ?

manish

tried that, but could not log.

At last loaded another PC with routerOS and did MAC telnet. and it loged in.

somehow the router shuold have brought error, when i typed 0.0.0.0

but i learned one more thing.

Thanks for the help everyone !

manish

just comes back saying wrong username and password.

when i tried web based login it came back saying :-
not allowed to login from this address (6)

its expecting the admin address to be 0.0.0.0

manish

i was getting d/c from the router so i changed the admin access from the IP address i specified earlier to 0.0.0.0

and from that moment i cannot log on using winbox / ssh.

any suggestion on how can i gain access again.

manish

Please specify whrer !

I have pppoe and hotspot running off one rotuerOS.

Thanks.

manish

Hello,

Tried to configure web-cache in mikrotik but it just does not work. When i do redirect the squid error appears that the URL /_ cannot be accepted.

We have a full working squid box, is there a rule to put in so that cache traffic is passed without being limited ?

thanks for any help !

rgds,

manish

thanks a lot, will try this !

manish

hi,

i have setup pppoe, to allow only one host. but i was able to use the same username and password to connect 2 host. and each one got the same bandwidth allocation. using. 2.9.27

manish

is anybody doing hotspot and web cache together ?

please share the config ! i have tried several but cannot get hits on web cache !

need simple firewall for the box and web cache work.

manish

hello, am stuck with these, any help ! 1. web proxy, how to enable cache, even after checking tranparent proxy, on user profile, hotspot, still i do not see any hits on the cache server. ether1- wan, ether2 LAN. the cache is running on port 8080. i want to eneble cache for all internal users. (LAN) ...

manish

done, needed to disable ip pool.

manish

Hello, I am new to the mikrotik, just setup one with a hotspot. Worked fine on a test site. When i connected it on our network it started to mess up. On the same network we have a range of 192.168.255.0/23 having a sgateway of 192.168.255.1 this goes through different gateway and all these IP are ke...

Search found 41 matches

Re: BGP between ver 7 and 6

BGP between ver 7 and 6

Re: Traffic Engineering RouterOS 7

Traffic Engineering RouterOS 7

Re: v7.4.1 [stable] is released!

Re: v7.1 is released!

Re: Switch high CPU VLAN

Re: Switch high CPU VLAN

Re: Switch high CPU VLAN

Re: Switch high CPU VLAN

Re: Switch high CPU VLAN

Re: pppoe connection was already active closing previous one [SOLVED]

Re: Switch high CPU VLAN

Re: Switch high CPU VLAN

Switch high CPU VLAN

PPPoE Server ICMP bypass

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Re: OSPF Default Route

OSPF Default Route

New to Dude

Re: queue Trees

Re: queue Trees

Re: CRS326-24G-2S+ high CPU

CRS326-24G-2S+ high CPU

Re: queue Trees

Re: queue Trees

Re: queue Trees

queue Trees

Re: v6.47.7 [stable] is released!

by passing cache traffic

locked out router !

cache bypass

pppoe making more then one connection

hotspot and web cache

hotspot help

router software 2.9