Community discussions

Search found 80 matches

by xcom
Wed Apr 04, 2018 8:43 pm
Forum: Beginner Basics
Topic: Moving to a new switch
Replies: 4
Views: 530

Re: Moving to a new switch

Do you still need the old switch LOL. I am on the hunt for a sweet deal........
I'll sell it for cheap if I can find a new one. :)
by xcom
Wed Apr 04, 2018 7:42 pm
Forum: Beginner Basics
Topic: Moving to a new switch
Replies: 4
Views: 530

Re: Moving to a new switch

Has anybody played around with the CRS328-24P-4S+RM?
Can you post a pic for size reference?
Is it loud?

TIA!
by xcom
Tue Apr 03, 2018 7:39 am
Forum: Beginner Basics
Topic: Moving to a new switch
Replies: 4
Views: 530

Moving to a new switch

I currently have a MikroTik - CRS125-24G-1S-RM... Now I am want to upgrade to the new versions.... Layer 3 Routing (SwOS). No need for Router OS. Must have LACP.
PoE is not a must but would be nice.

What would you recommend me?
by xcom
Sun Apr 01, 2018 7:57 pm
Forum: Beginner Basics
Topic: WAN IP leak
Replies: 12
Views: 1088

Re: WAN IP leak

It s the Mikrotik. The Protocol is SIP/UDP Port 5060 The Source is inet addr:10.30.2.175 so I know is not grabbing the WAN IP. I suspect you have a NAT aware PBX system, it is a way the PBX companies are trying to workaround the NAT traversal problems, what it does (if I recall correctly) is it che...
by xcom
Sun Apr 01, 2018 6:51 am
Forum: Beginner Basics
Topic: WAN IP leak
Replies: 12
Views: 1088

Re: WAN IP leak

It s the Mikrotik. The Protocol is SIP/UDP Port 5060 The Source is inet addr:10.30.2.175 so I know is not grabbing the WAN IP. I suspect you have a NAT aware PBX system, it is a way the PBX companies are trying to workaround the NAT traversal problems, what it does (if I recall correctly) is it che...
by xcom
Sun Apr 01, 2018 2:02 am
Forum: Beginner Basics
Topic: WAN IP leak
Replies: 12
Views: 1088

Re: WAN IP leak

It s the Mikrotik. The Protocol is SIP/UDP Port 5060 The Source is inet addr:10.30.2.175 so I know is not grabbing the WAN IP. I suspect you have a NAT aware PBX system, it is a way the PBX companies are trying to workaround the NAT traversal problems, what it does (if I recall correctly) is it che...
by xcom
Sat Mar 31, 2018 4:45 pm
Forum: Beginner Basics
Topic: WAN IP leak
Replies: 12
Views: 1088

Re: WAN IP leak

It s the Mikrotik. The Protocol is SIP/UDP Port 5060
The Source is inet addr:10.30.2.175 so I know is not grabbing the WAN IP.
by xcom
Sat Mar 31, 2018 6:22 am
Forum: Beginner Basics
Topic: WAN IP leak
Replies: 12
Views: 1088

Re: WAN IP leak

Here is what my config looks like. Nothings stands out to me on why is this happening... # mar/30/2018 22:07:06 by RouterOS 6.41 # software id = AXKP-SIF0 # # model = CRS125-24G-1S # serial number = /interface bridge add admin-mac= arp=proxy-arp auto-mac=no fast-forward=no \ mtu=1500 name=Bridge-pfS...
by xcom
Sat Mar 31, 2018 4:35 am
Forum: Beginner Basics
Topic: WAN IP leak
Replies: 12
Views: 1088

WAN IP leak

My WAN IP on my Mikrotik is leaking inside my network. Is there a way to stop this?
My pfSense is reporting:

Interface: LAN
Source: Mikrotik WAN IP
Destination: voip.ms

Instead of the WAN IP it should be my internal IP that should be coming from the device up to my pfSense.
Ideas?

Thanks!
by xcom
Sat Mar 31, 2018 12:54 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

I would assume its set correctly ie the mikrotik router for all outgoing connections to ISP1 has masquerate applied. Not sure how the 10.30.2.0 packets are getting confused in the mix though.......... I read something about preventing packets leaking out of the LAN but cannot remember where...........
by xcom
Sat Mar 31, 2018 12:22 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Try narrowing down the mangle rule to 10.30.2.5
although its probably some other cockup in the rules maybe a srcnat situation ???
I did set the source to. 5
Its funny you say that the GW port of the mikrotik is set to NAT. Is it not suppose to?
by xcom
Fri Mar 30, 2018 11:10 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Traffic from where is going out the mikrotik?? Are you sure the source is 10.30.2.5 Are you sure this is not lan traffic leaking out the mikrotik or is it traffic intended for the internet?? Yes. Its an asterisk server trying to qualify a registration server. This is .5. And is trying to go out of ...
by xcom
Fri Mar 30, 2018 10:50 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Thanks, the seas have parted, I am going to cross the ocean bottom to the promised land to MT programming. I hope you can see where I was uncertain................. In your diagram you explicitly stated that 10.30.2.5 internet traffic had to go via the PFSENSE unit but there was no mention of the 1...
by xcom
Fri Mar 30, 2018 9:02 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

you didnt answer the question directly XCOM. What I needed to hear was a. all non-local traffic from the 10.30.2.0 network (regardless if from 10.30.2.4 or 10.30.2.5) ie needs to go to the internet shall get routed to the PFSENSE device (for eventual TX thru ISP2) b. no traffic from 10.30.2.0 netwo...
by xcom
Fri Mar 30, 2018 8:45 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

@Anav Hello All! I want to point my local network to my CRS125-24G-1S-RM as the gateway. In the CRS125-24G-1S-RM I want to tell it that for all networks with 10.XXX.XXX.XXX to go out through my pfsense, Else Go out through the CRS125-24G-1S-RM gateway. IE: 10.60.77.0/24 LAN.... non-routable address...
by xcom
Fri Mar 30, 2018 7:21 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

@ Anav /ip route add distance=1 gateway=10.30.2.1 routing-mark=pfsense This creates a route for 0.0.0.0/0 (which basically means anything not local) to go out gateway=10.30.2.1(which is the pfsence), but only if it has a routing-mark=pfsence. /ip firewall mangle add action=mark-routing chain=prerou...
by xcom
Fri Mar 30, 2018 6:30 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Clue XCOM - Bridge settings my friend, in WINBOX
Ah.... I dont use Winbox, Linux here.
Ill spin up my VM and run it.
by xcom
Fri Mar 30, 2018 6:23 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Set arp=proxy-arp and protocol-mode==none.
You want me to set those options?
Yes, try those settings on your bridge.
Can you tell me how to run the command? Cant seem to see it under /ip arp...

Thanks!
by xcom
Fri Mar 30, 2018 5:03 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Set arp=proxy-arp and protocol-mode==none.
You want me to set those options?
by xcom
Fri Mar 30, 2018 5:01 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

What do have for: /interface bridge print Set arp=proxy-arp and protocol-mode==none. You can change Interface names with out any down time. Any rule you have pointing to that interface will change with out it breaking any thing. [admin@MikroTik] > /interface bridge print Flags: X - disabled, R - ru...
by xcom
Fri Mar 30, 2018 4:12 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

/me takes a deep breath... Ok.... Accounting for everything else and not local? I Only want to know what my vlans consume. Local is just me and I account for that in the pfsense. vlan 2 and 3 are Guest vlan and test vlan The dhcp pools the default one is disable. The rest are for the vlans. I also h...
by xcom
Thu Mar 29, 2018 9:50 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

BumP :D
by xcom
Thu Mar 29, 2018 6:33 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

No, I think it is something simple that is being overlooked somewhere. Either a setting on the Mikrotik or on pfsense. I just setup a test running pfsense on a virtual machine on my desktop with two virtual nics. My router is 192.168.88.1/24 on bridge1. pfsense LAN is Static to 192.168.88.5. I set ...
by xcom
Thu Mar 29, 2018 2:30 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

hide-sensitive really does not hide sensitive... /export filename=export and you can download the created export.rsc file and edit with your favorite text editor. Is there a reason to have the pfsense in the same IP Scope as your LAN? Could you change it to a different IP scope? I think that what I...
by xcom
Thu Mar 29, 2018 2:22 am
Forum: General
Topic: Help me decide
Replies: 11
Views: 917

Re: Help me decide

Why do you have to use OpenVPN? Are you connecting site to site?
1- This is not my decision. Its my job.
2- Yes.
by xcom
Thu Mar 29, 2018 1:55 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

And as always, a /export hide-sensitive is always appreciated!
hide-sensitive really does not hide sensitive...
by xcom
Wed Mar 28, 2018 11:37 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Yes pfsense has one leg in the mikrotik switch and is part of my Lan all living under one subnet.... Than it has another leg carrying its own wan.
by xcom
Wed Mar 28, 2018 11:35 pm
Forum: General
Topic: Help me decide
Replies: 11
Views: 917

Re: Help me decide

Thanks for letting me know!
Regards,
by xcom
Wed Mar 28, 2018 10:52 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Working on it!
by xcom
Wed Mar 28, 2018 9:28 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Use Tools>Traceroute with routing-table=pfsense and see if it shows you where the bottleneck is. Compare to routing-table=main.

And/Or

Connect a device directly to the pfsense and see if you get the same results.
Systems with gateway out through the pfsense have no issues.
by xcom
Wed Mar 28, 2018 8:28 pm
Forum: General
Topic: Help me decide
Replies: 11
Views: 917

Help me decide

I need to have OpenVPN and Proxy capabilities. About 60 Devices and 5 Users. This will be in a Home Office environment with link to work with openvpn.
There will be Two asterisk servers behind it.

Which should I go with:

CCR1009-7G-1C-1S+

or

RB1100AHx4 Dude Edition
by xcom
Wed Mar 28, 2018 8:25 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

No unfortunately, way above my pay grade LOL.
Bah!
LOL!
by xcom
Wed Mar 28, 2018 8:01 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Hence my suggestion to only use the mikrotik and Punt the pfsense unit out the door, down the street and into a body of water of your choice............... (probably to join your old zyxel unit). I wish I could anav. LOL Work has me tide down to it. :( I would need some serious help to transition f...
by xcom
Wed Mar 28, 2018 6:14 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

So your options work and like the others is what I need.
But what I dont understand is... As soon as I make the changes... Internet out pfsense slows down... I actually thought it was DNS but is not. a simple curl to get an IP response over the internet takes over 5 seconds. :(
by xcom
Wed Mar 28, 2018 3:56 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

yes the very same xcom, I was wondering about your nick LOL. I recently bought a hEX to play with.
LOL!
Small world after all!
Does are very nice. I own one and love it!
by xcom
Wed Mar 28, 2018 2:48 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

/ip route add distance=1 gateway=10.30.2.1 routing-mark=pfsense /ip firewall mangle add action=mark-routing chain=prerouting dst-address=!10.30.2.0/24 new-routing-mark=pfsense passthrough=no src-address=10.30.2.0/24 It did the trick but is causing a huge performance degradation on going out to the ...
by xcom
Wed Mar 28, 2018 2:25 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

/ip route add distance=1 gateway=10.30.2.1 routing-mark=pfsence /ip firewall mangle add action=mark-routing chain=prerouting dst-address=!10.30.2.0/24 new-routing-mark=pfsence passthrough=no src-address=10.30.2.0/24 I think this is what I am looking for. Thanks for the help. All inputs/ideas/commen...
by xcom
Wed Mar 28, 2018 2:20 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

That the modem provides two public IP addresses??
That is right.

@anav, You dont happen to hang around the DSLReports Forum?
by xcom
Wed Mar 28, 2018 12:19 am
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

It still is not any clearer provide a network diagram so we can see the physical and IP relationships between the devices,.,.,.,.,.,.,.,.
Look at the attached diagram
by xcom
Tue Mar 27, 2018 10:51 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

lol I do... I just don't know how to say it the right way. :P

If my mikrotik is my gateway, how can I tell it to send non-routable addresses (meaning the internet) through my pfsense box? I know how to do this with a brocade but mikrotik is a whole different monster.. :)
by xcom
Tue Mar 27, 2018 10:12 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Re: Forward route

Also, If I can not choose a subnet, Can I do a host? If so how?

Thanks!
by xcom
Tue Mar 27, 2018 9:35 pm
Forum: Beginner Basics
Topic: Forward route
Replies: 59
Views: 3670

Forward route

Hello All! I want to point my local network to my CRS125-24G-1S-RM as the gateway. In the CRS125-24G-1S-RM I want to tell it that for all networks with 10.XXX.XXX.XXX to go out through my pfsense, Else Go out through the CRS125-24G-1S-RM gateway. IE: 10.60.77.0/24 LAN.... non-routable addresses go t...
by xcom
Fri Jun 30, 2017 4:52 am
Forum: General
Topic: vlan question
Replies: 3
Views: 517

Re: vlan question

Fixed. Thanks!
by xcom
Thu Jun 29, 2017 3:26 pm
Forum: General
Topic: vlan question
Replies: 3
Views: 517

Re: vlan question

Bump! :)
by xcom
Wed Jun 28, 2017 4:30 pm
Forum: General
Topic: vlan question
Replies: 3
Views: 517

vlan question

Team, I own a CRS125-24G-1S-RM, I am installing a new firewall and I wanted to segregate the internet away on its own ports. So I went to the GUI and under Switch -> VLAN: I created a vlan and add it 3 ports to it. ON this ports I connected my Firewalls and my WAN. The issue I see is that this ports...
by xcom
Tue Oct 06, 2015 4:24 pm
Forum: Wireless Networking
Topic: But Why?
Replies: 1
Views: 526

But Why?

Can somebody enlighten me on why MikroTik decides to use 10/100 Ethernet ports on most of their compact format AP's?
Does it make sense?
I mean am I wrong to think that this could be a bottle neck point?

Thanks for the help in advance.
by xcom
Thu Jul 02, 2015 9:19 pm
Forum: Announcements
Topic: v6.29 released
Replies: 193
Views: 50064

Re: v6.29 released


Where can I download 6.28?

Thanks!
Copy the old URL and adjust it like -
http://download2.mikrotik.com/routeros/ ... e-6.28.npk
Thanks!
by xcom
Tue Jun 30, 2015 4:49 pm
Forum: Announcements
Topic: v6.29 released
Replies: 193
Views: 50064

Re: v6.29 released

@Infused
I roll 6.28 release on 90% of our company routers and its by far most stable version, but to be honest, i didnt had problems with 6.27 either.
Where can I download 6.28?

Thanks!
by xcom
Fri Nov 07, 2014 6:06 pm
Forum: General
Topic: Feature Request: NUT Client
Replies: 26
Views: 6719

Re: Feature Request: NUT Client

This is smart. Thanks for answer. But doesn't it just prolonging the outage time? And what if not all devices went down correctly? Do you still recycle the power? Nut client could be useful in some cases, I agree. But I still would rather see mikrotik focusing on errors corrections then implementin...
by xcom
Fri Nov 07, 2014 5:31 pm
Forum: General
Topic: Feature Request: NUT Client
Replies: 26
Views: 6719

Re: Feature Request: NUT Client

How do you start remotely your mikrotik devices when the outage is gone if you shut down them before? It all depends how your ups is configured along with NUT. In my case. I have my system configured via nut to shutdown when the ups reaches critical stages. Once nut knows all of the systems are dow...
by xcom
Fri Nov 07, 2014 4:40 pm
Forum: General
Topic: Feature Request: NUT Client
Replies: 26
Views: 6719

Re: Feature Request: NUT Client

+1 @macgaiver: http://www.networkupstools.org/ I had put this in discussion some time time ago: http://forum.mikrotik.com/viewtopic.php?f=1&t=48762 But it seems that everyone understands to implement the NUT server, not the client. But you are right, nut may offer also snmp services through the nut...
by xcom
Fri Nov 07, 2014 5:14 am
Forum: General
Topic: Feature Request: NUT Client
Replies: 26
Views: 6719

Feature Request: NUT Client

Is it possible to have an apk for a nut client/server?
This could be very beneficial to the community.

Regards!
by xcom
Fri Nov 07, 2014 5:11 am
Forum: General
Topic: UPS Question
Replies: 3
Views: 1078

Re: UPS Question

if you can add a UPS via IP instead of physical serial perhaps. Or you can try scripts and API. I dont have such a UPS or service so i dont have the chance to mess around with that area. Interesting... I have a nut server and all my systems connect to the server via the client option of nut. Would ...
by xcom
Mon Oct 27, 2014 4:43 pm
Forum: General
Topic: UPS Question
Replies: 3
Views: 1078

Re: UPS Question

bump
by xcom
Mon Oct 27, 2014 3:38 am
Forum: General
Topic: UPS Question
Replies: 3
Views: 1078

UPS Question

Is it possible to have routeros connect to a apcupsd server?

Regards.
by xcom
Sun Oct 12, 2014 9:00 pm
Forum: General
Topic: Dude 6.20
Replies: 12
Views: 2181

Re: Dude 6.20

Thx, but My Windows Dude did not recognise my network.
Only router but I don't see any of devices connected to the network.
Same issue I have.
by xcom
Thu Oct 09, 2014 5:29 pm
Forum: The Dude
Topic: Recommended Replacement Network Monitoring System??
Replies: 20
Views: 8071

Re: Recommended Replacement Network Monitoring System??

Give Observium a try.
by xcom
Tue Oct 07, 2014 5:50 am
Forum: General
Topic: Add print server (printer support)
Replies: 138
Views: 60937

Re: Add print server (printer support)

worst freaking idea ever.


---------------------1
by xcom
Mon Oct 06, 2014 4:56 am
Forum: Beginner Basics
Topic: CRS VLAN Management IP
Replies: 11
Views: 8913

Re: CRS VLAN Management IP

Where is that "birdge-local" comming from... I don't see it defined anywhere ? Also looking at the topic starter... I would think the config is correct but I've a similar one and it neither works ? The question is however simple... define a VLAN on the CRS, link a DHCP client or server to it and ha...
by xcom
Fri Oct 03, 2014 1:15 am
Forum: General
Topic: CRS documentation
Replies: 79
Views: 30293

Re: CRS documentation

Is anyone doing a bit more with a CRS than what you would do with a managed switch ? I'm trying something very basic like putting a DHCP client on a VLAN and don't get it working because the CRS is not untagging traffic on the ports (which is just a simple concept of an access port). If someone is ...
by xcom
Thu Oct 02, 2014 7:22 am
Forum: General
Topic: Bash Exploit
Replies: 24
Views: 13755

Re: Bash Exploit

ash shell.
by xcom
Mon Sep 15, 2014 2:05 am
Forum: General
Topic: v6.19 released
Replies: 256
Views: 93878

Re: v6.19 released

If this will be the case for all firmwares going forward, I will take my switch off my network and set it on fire...
I am a linux user and having to install wine to run another buggy ass application... Hell no!... You can keep the spoon.
:evil: :evil: :evil:
by xcom
Sun Aug 10, 2014 9:25 pm
Forum: General
Topic: Test racks
Replies: 75
Views: 24990

Re: Test racks

Very nice and clean!
by xcom
Tue Aug 05, 2014 2:34 am
Forum: General
Topic: v6.18
Replies: 109
Views: 29975

Re: v6.18

I'm having an issue with NTP on upgrading. None of my boxes will grab time anymore. I'm not sure what to do. It is affecting some of my services. I have tried several ntp servers, i have disabled and enabled. It will convert the names to IP's but it will not update time. Any suggestions? I have the...
by xcom
Wed Jul 30, 2014 8:31 pm
Forum: Beginner Basics
Topic: CRS VLAN Management IP
Replies: 11
Views: 8913

Re: CRS VLAN Management IP

Team, I have the same switch. I went trough some issues but with help I was able to get it to work. Though my requirements where a bit different it might help or give others an idea... Here are my notes: Ok first create a vlan under the interfaces = add vlan and attach it to "bridge-local" or you ca...
by xcom
Sat Jul 19, 2014 1:57 am
Forum: General
Topic: Winbox 3 beta
Replies: 243
Views: 120769

Re: Winbox 3

Thanks for the update.
Keep up the good work!
by xcom
Thu Jul 17, 2014 4:00 pm
Forum: General
Topic: Switching with RouterOS / CRS Questions
Replies: 81
Views: 43843

Re: Switching with RouterOS / CRS Questions

michaelahess, The following Cloud Router Switch configuration should be applied for your setup: ... Thanks becs! I'll try this when I get home tonight. One thing I'm still worried about though, the master port of the switch group, is it best to not actually use that port for a real link since it ha...
by xcom
Sun Jul 13, 2014 8:18 pm
Forum: General
Topic: New here
Replies: 7
Views: 1118

Re: New here

Thanks Tony. So far all is well after a few head bangs against the wall. :)
by xcom
Sun Jul 13, 2014 9:00 am
Forum: General
Topic: vlan question
Replies: 3
Views: 523

Re: vlan question

Got it all taken care thanks to a user on the irc channel.

Again thanks!!!
by xcom
Sat Jul 12, 2014 7:03 pm
Forum: General
Topic: Switching with RouterOS / CRS Questions
Replies: 81
Views: 43843

Re: Switching with RouterOS / CRS Questions

michaelahess, The following Cloud Router Switch configuration should be applied for your setup: ... Thanks becs! I'll try this when I get home tonight. One thing I'm still worried about though, the master port of the switch group, is it best to not actually use that port for a real link since it ha...
by xcom
Sat Jul 12, 2014 6:48 pm
Forum: General
Topic: vlan question
Replies: 3
Views: 523

Re: vlan question

:) up.
by xcom
Sat Jul 12, 2014 9:59 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE FIRS USE!!
Replies: 5
Views: 1145

Re: CLOUD CORE FIRS USE!!

You have to plugin a device to one of the ports.
At least the CSR is that way.

Now during boot up all of my lights do turn on.
by xcom
Sat Jul 12, 2014 3:55 am
Forum: General
Topic: vlan question
Replies: 3
Views: 523

Re: vlan question

any body? :)
by xcom
Fri Jul 11, 2014 4:32 pm
Forum: General
Topic: vlan question
Replies: 3
Views: 523

vlan question

Hello there... I am trying to look for information on the CSR and cant find much... Is it possible to have a vlan tagged and enable dhcp only for that tag? IE: Wireless comes in with a vlan tag of 10. I want that vlan to get a dhcp lease from my csr. All others un-tagged continue as is... Than those...
by xcom
Wed Jul 09, 2014 6:33 am
Forum: General
Topic: Software upgrade error
Replies: 1
Views: 479

Re: Software upgrade error

There is a lot I need to learn from this switch.
I setup my internet-gateway port as static and all worked well.

Now for reading.

this is obscure as it can get :shock: :lol:
by xcom
Wed Jul 09, 2014 5:35 am
Forum: General
Topic: Software upgrade error
Replies: 1
Views: 479

Software upgrade error

ERROR: server is not responding

When I click on check for updates that what I get: ERROR: server is not responding

I just got a CRS125-24G-1S-RM
Firmware is 6.9

Any ideas?

Regards.
by xcom
Tue Jul 08, 2014 4:15 pm
Forum: General
Topic: New here
Replies: 7
Views: 1118

Re: New here

Depends on what you will use it for. It is a good affordable switch, with ability to use routing for some ports as well. That's a bit scary... :D Well I currently use vlan's (un-tagged and tagged) and QoS. Not much more. I might do some routing now that this is capable of L3. Is that ok or might go...
by xcom
Tue Jul 08, 2014 4:07 pm
Forum: General
Topic: New here
Replies: 7
Views: 1118

Re: New here

CRS are a good basic switch. Once you figure out the obscure configuration they go really well.

FYI x430-8p is fanless and has 802.3at PoE.

Thanks for your reply.

I have the 28pt and is not fanless nor is poe.
http://www.extremenetworks.com/product/ ... 30-series/
by xcom
Tue Jul 08, 2014 1:25 am
Forum: General
Topic: New here
Replies: 7
Views: 1118

Re: New here

Does anybody have any hands on experience with the above particular model?

Can you share your thoughts?

Regards.
by xcom
Sat Jul 05, 2014 9:03 pm
Forum: General
Topic: New here
Replies: 7
Views: 1118

New here

Hello there! Well I am here because I got tired of all the noise my Extreme x430 makes. On a search for a comfortable replacement I found: MikroTik - CRS125-24G-1S-RM I purchased one :) I am hoping that I made a good decision. Looking forward to hanging around as much as time permits. Should be here...